1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
|
=head1 NAME
Config::Model::models::LCDd::MtxOrb - Configuration class LCDd::MtxOrb
=head1 VERSION
version 2.021
=head1 DESCRIPTION
Configuration classes used by L<Config::Model>
generated from LCDd.conf
=head1 Elements
=head2 Device
Select the output device to use I<< Optional. Type uniline. upstream_default: '/dev/lcd'. >>
=head2 Size
Set the display size I<< Optional. Type uniline. upstream_default: '20x4'. >>
=head2 Type
Set the display type I<< Optional. Type enum. choice: 'lcd', 'lkd', 'vfd', 'vkd'. upstream_default: 'lcd'. >>
=head2 Contrast
Set the initial contrast
NOTE: The driver will ignore this if the display
is a vfd or vkd as they don't have this feature. I<< Optional. Type uniline. upstream_default: '480'. >>
=head2 hasAdjustableBacklight
Some old displays do not have an adjustable backlight but only can
switch the backlight on/off. If you experience randomly appearing block
characters, try setting this to false. I<< Optional. Type enum. choice: 'yes', 'no'. upstream_default: 'yes'. >>
=head2 Brightness
Set the initial brightness I<< Optional. Type integer. upstream_default: '1000'. >>
=head2 OffBrightness
Set the initial off-brightness
This value is used when the display is normally
switched off in case LCDd is inactive. I<< Optional. Type integer. upstream_default: '0'. >>
=head2 Speed
Set the communication speed I<< Optional. Type enum. choice: '1200', '2400', '9600', '19200'. upstream_default: '19200'. >>
=head2 KeyMap_A
The following table translates from MtxOrb key letters to logical key names.
By default no keys are mapped, meaning the keypad is not used at all.I<< Optional. Type uniline. default: 'Left'. >>
=head2 KeyMap_B
I<< Optional. Type uniline. default: 'Right'. >>
=head2 KeyMap_C
I<< Optional. Type uniline. default: 'Up'. >>
=head2 KeyMap_D
I<< Optional. Type uniline. default: 'Down'. >>
=head2 KeyMap_E
I<< Optional. Type uniline. default: 'Enter'. >>
=head2 KeyMap_F
I<< Optional. Type uniline. default: 'Escape'. >>
=head2 keypad_test_mode
See the [menu] section for an explanation of the key mappings
You can find out which key of your display sends which
character by setting keypad_test_mode to yes and running
LCDd. LCDd will output all characters it receives.
Afterwards you can modify the settings above and set
keypad_set_mode to no again.I<< Optional. Type uniline. default: 'no'. >>
=head1 SEE ALSO
=over
=item *
L<cme>
=back
=cut
|
