#!/bin/bash
# SPDX-License-Identifier: GPL-2.0-or-later
# SPDX-FileCopyrightText: 2017-2021 Bartosz Golaszewski <bartekgola@gmail.com>
# SPDX-FileCopyrightText: 2022 Kent Gibson <warthog618@gmail.com>
# SPDX-FileCopyrightText: 2023 Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

export SOURCE_DIR
SOURCE_DIR="$(dirname "${BASH_SOURCE[0]}")"

#
# gpiodetect test cases
#

test_gpiodetect_all_chips() {
	gpiosim_chip sim0 num_lines=4
	gpiosim_chip sim1 num_lines=8
	gpiosim_chip sim2 num_lines=16

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}
	local sim1=${GPIOSIM_CHIP_NAME[sim1]}
	local sim2=${GPIOSIM_CHIP_NAME[sim2]}
	local sim0dev=${GPIOSIM_DEV_NAME[sim0]}
	local sim1dev=${GPIOSIM_DEV_NAME[sim1]}
	local sim2dev=${GPIOSIM_DEV_NAME[sim2]}

	run_prog gpiodetect

	output_regex_match "$sim0 \[${sim0dev}[-:]node0\] \(4 lines\)"
	output_regex_match "$sim1 \[${sim1dev}[-:]node0\] \(8 lines\)"
	output_regex_match "$sim2 \[${sim2dev}[-:]node0\] \(16 lines\)"
	status_is 0

	# ignoring symlinks
	local initial_output=$output
	gpiosim_chip_symlink sim1 /dev

	run_prog gpiodetect

	output_is "$initial_output"
	status_is 0
}

test_gpiodetect_a_chip() {
	gpiosim_chip sim0 num_lines=4
	gpiosim_chip sim1 num_lines=8
	gpiosim_chip sim2 num_lines=16

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}
	local sim1=${GPIOSIM_CHIP_NAME[sim1]}
	local sim2=${GPIOSIM_CHIP_NAME[sim2]}
	local sim0dev=${GPIOSIM_DEV_NAME[sim0]}
	local sim1dev=${GPIOSIM_DEV_NAME[sim1]}
	local sim2dev=${GPIOSIM_DEV_NAME[sim2]}

	# by name
	run_prog gpiodetect "$sim0"

	output_regex_match "$sim0 \[${sim0dev}[-:]node0\] \(4 lines\)"
	num_lines_is 1
	status_is 0

	# by path
	run_prog gpiodetect "${GPIOSIM_CHIP_PATH[sim1]}"

	output_regex_match "$sim1 \[${sim1dev}[-:]node0\] \(8 lines\)"
	num_lines_is 1
	status_is 0

	# by number
	run_prog gpiodetect "$(gpiosim_chip_number sim2)"

	output_regex_match "$sim2 \[${sim2dev}[-:]node0\] \(16 lines\)"
	num_lines_is 1
	status_is 0

	# by symlink
	gpiosim_chip_symlink sim2 .
	run_prog gpiodetect "$GPIOSIM_CHIP_LINK"

	output_regex_match "$sim2 \[${sim2dev}[-:]node0\] \(16 lines\)"
	num_lines_is 1
	status_is 0
}

test_gpiodetect_multiple_chips() {
	gpiosim_chip sim0 num_lines=4
	gpiosim_chip sim1 num_lines=8
	gpiosim_chip sim2 num_lines=16

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}
	local sim1=${GPIOSIM_CHIP_NAME[sim1]}
	local sim2=${GPIOSIM_CHIP_NAME[sim2]}
	local sim0dev=${GPIOSIM_DEV_NAME[sim0]}
	local sim1dev=${GPIOSIM_DEV_NAME[sim1]}
	local sim2dev=${GPIOSIM_DEV_NAME[sim2]}

	run_prog gpiodetect "$sim0" "$sim1" "$sim2"

	output_regex_match "$sim0 \[${sim0dev}[-:]node0\] \(4 lines\)"
	output_regex_match "$sim1 \[${sim1dev}[-:]node0\] \(8 lines\)"
	output_regex_match "$sim2 \[${sim2dev}[-:]node0\] \(16 lines\)"
	num_lines_is 3
	status_is 0
}

test_gpiodetect_with_nonexistent_chip() {
	run_prog gpiodetect nonexistent-chip

	status_is 1
	output_regex_match \
".*cannot find GPIO chip character device 'nonexistent-chip'"
}

#
# gpioinfo test cases
#

test_gpioinfo_all_chips() {
	gpiosim_chip sim0 num_lines=4
	gpiosim_chip sim1 num_lines=8

	run_prog gpioinfo

	output_contains_line "${GPIOSIM_CHIP_NAME[sim0]} - 4 lines:"
	output_contains_line "${GPIOSIM_CHIP_NAME[sim1]} - 8 lines:"
	output_regex_match "\\s+line\\s+0:\\s+unnamed\\s+input"
	output_regex_match "\\s+line\\s+7:\\s+unnamed\\s+input"
	status_is 0

	# ignoring symlinks
	local initial_output=$output
	gpiosim_chip_symlink sim1 /dev

	run_prog gpioinfo

	output_is "$initial_output"
	status_is 0
}

test_gpioinfo_all_chips_with_some_used_lines() {
	gpiosim_chip sim0 num_lines=4 line_name=1:foo line_name=2:bar
	gpiosim_chip sim1 num_lines=8 line_name=3:baz line_name=4:xyz

	dut_run gpioset --banner --active-low foo=1 baz=0

	run_prog gpioinfo

	output_contains_line "${GPIOSIM_CHIP_NAME[sim0]} - 4 lines:"
	output_contains_line "${GPIOSIM_CHIP_NAME[sim1]} - 8 lines:"
	output_regex_match "\\s+line\\s+0:\\s+unnamed\\s+input"
	output_regex_match \
"\\s+line\\s+1:\\s+\"foo\"\\s+output active-low consumer=\"gpioset\""
	output_regex_match \
"\\s+line\\s+3:\\s+\"baz\"\\s+output active-low consumer=\"gpioset\""
	status_is 0
}

test_gpioinfo_a_chip() {
	gpiosim_chip sim0 num_lines=8
	gpiosim_chip sim1 num_lines=4

	local sim1=${GPIOSIM_CHIP_NAME[sim1]}

	# by name
	run_prog gpioinfo --chip "$sim1"

	output_contains_line "$sim1 - 4 lines:"
	output_regex_match "\\s+line\\s+0:\\s+unnamed\\s+input"
	output_regex_match "\\s+line\\s+1:\\s+unnamed\\s+input"
	output_regex_match "\\s+line\\s+2:\\s+unnamed\\s+input"
	output_regex_match "\\s+line\\s+3:\\s+unnamed\\s+input"
	num_lines_is 5
	status_is 0

	# by path
	run_prog gpioinfo --chip "$sim1"

	output_contains_line "$sim1 - 4 lines:"
	output_regex_match "\\s+line\\s+0:\\s+unnamed\\s+input"
	output_regex_match "\\s+line\\s+1:\\s+unnamed\\s+input"
	output_regex_match "\\s+line\\s+2:\\s+unnamed\\s+input"
	output_regex_match "\\s+line\\s+3:\\s+unnamed\\s+input"
	num_lines_is 5
	status_is 0

	# by number
	run_prog gpioinfo --chip "$sim1"

	output_contains_line "$sim1 - 4 lines:"
	output_regex_match "\\s+line\\s+0:\\s+unnamed\\s+input"
	output_regex_match "\\s+line\\s+1:\\s+unnamed\\s+input"
	output_regex_match "\\s+line\\s+2:\\s+unnamed\\s+input"
	output_regex_match "\\s+line\\s+3:\\s+unnamed\\s+input"
	num_lines_is 5
	status_is 0

	# by symlink
	gpiosim_chip_symlink sim1 .
	run_prog gpioinfo --chip "$GPIOSIM_CHIP_LINK"

	output_contains_line "$sim1 - 4 lines:"
	output_regex_match "\\s+line\\s+0:\\s+unnamed\\s+input"
	output_regex_match "\\s+line\\s+1:\\s+unnamed\\s+input"
	output_regex_match "\\s+line\\s+2:\\s+unnamed\\s+input"
	output_regex_match "\\s+line\\s+3:\\s+unnamed\\s+input"
	num_lines_is 5
	status_is 0
}

test_gpioinfo_a_line() {
	gpiosim_chip sim0 num_lines=8 line_name=5:bar
	gpiosim_chip sim1 num_lines=4 line_name=2:bar

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}
	local sim1=${GPIOSIM_CHIP_NAME[sim1]}

	# by offset
	run_prog gpioinfo --chip "$sim1" 2

	output_regex_match "$sim1 2\\s+\"bar\"\\s+input"
	num_lines_is 1
	status_is 0

	# by name
	run_prog gpioinfo bar

	output_regex_match "$sim0 5\\s+\"bar\"\\s+input"
	num_lines_is 1
	status_is 0

	# by chip and name
	run_prog gpioinfo --chip "$sim1" 2

	output_regex_match "$sim1 2\\s+\"bar\"\\s+input"
	num_lines_is 1
	status_is 0

	# unquoted
	run_prog gpioinfo --unquoted --chip "$sim1" 2

	output_regex_match "$sim1 2\\s+bar\\s+input"
	num_lines_is 1
	status_is 0

}

test_gpioinfo_first_matching_named_line() {
	gpiosim_chip sim0 num_lines=4 line_name=1:foo line_name=2:bar \
				      line_name=3:foobar
	gpiosim_chip sim1 num_lines=8 line_name=0:baz line_name=2:foobar \
				      line_name=4:xyz line_name=7:foobar
	gpiosim_chip sim2 num_lines=16

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	run_prog gpioinfo foobar

	output_regex_match "$sim0 3\\s+\"foobar\"\\s+input"
	num_lines_is 1
	status_is 0
}

test_gpioinfo_multiple_lines() {
	gpiosim_chip sim0 num_lines=8 line_name=5:bar
	gpiosim_chip sim1 num_lines=4 line_name=2:baz

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}
	local sim1=${GPIOSIM_CHIP_NAME[sim1]}

	# by offset
	run_prog gpioinfo --chip "$sim1" 1 2

	output_regex_match "$sim1 1\\s+unnamed\\s+input"
	output_regex_match "$sim1 2\\s+\"baz\"\\s+input"
	num_lines_is 2
	status_is 0

	# by name
	run_prog gpioinfo bar baz

	output_regex_match "$sim0 5\\s+\"bar\"\\s+input"
	output_regex_match "$sim1 2\\s+\"baz\"\\s+input"
	num_lines_is 2
	status_is 0

	# by name and offset
	run_prog gpioinfo --chip "$sim0" bar 3

	output_regex_match "$sim0 5\\s+\"bar\"\\s+input"
	output_regex_match "$sim0 3\\s+unnamed\\s+input"
	num_lines_is 2
	status_is 0
}

test_gpioinfo_line_attribute_menagerie() {
	gpiosim_chip sim0 num_lines=4 line_name=1:foo
	gpiosim_chip sim1 num_lines=8 line_name=3:baz

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}
	local sim1=${GPIOSIM_CHIP_NAME[sim1]}

	dut_run gpioset --banner --active-low --bias=pull-up --drive=open-source foo=1 baz=0

	run_prog gpioinfo foo baz

	output_regex_match \
"$sim0 1\\s+\"foo\"\\s+output active-low drive=open-source bias=pull-up consumer=\"gpioset\""
	output_regex_match \
"$sim1 3\\s+\"baz\"\\s+output active-low drive=open-source bias=pull-up consumer=\"gpioset\""
	num_lines_is 2
	status_is 0

	dut_kill
	dut_wait

	dut_run gpioset --banner --bias=pull-down --drive=open-drain foo=1 baz=0

	run_prog gpioinfo foo baz

	output_regex_match \
"$sim0 1\\s+\"foo\"\\s+output drive=open-drain bias=pull-down consumer=\"gpioset\""
	output_regex_match \
"$sim1 3\\s+\"baz\"\\s+output drive=open-drain bias=pull-down consumer=\"gpioset\""
	num_lines_is 2
	status_is 0

	dut_kill
	dut_wait

	dut_run gpiomon --banner --bias=disabled --utc -p 10ms foo baz

	run_prog gpioinfo foo baz

	output_regex_match \
"$sim0 1\\s+\"foo\"\\s+input bias=disabled edges=both event-clock=realtime debounce-period=10ms consumer=\"gpiomon\""
	output_regex_match \
"$sim1 3\\s+\"baz\"\\s+input bias=disabled edges=both event-clock=realtime debounce-period=10ms consumer=\"gpiomon\""
	num_lines_is 2
	status_is 0

	dut_kill
	dut_wait

	dut_run gpiomon --banner --edges=rising --localtime foo baz

	run_prog gpioinfo foo baz

	output_regex_match \
"$sim0 1\\s+\"foo\"\\s+input edges=rising event-clock=realtime consumer=\"gpiomon\""
	output_regex_match \
"$sim1 3\\s+\"baz\"\\s+input edges=rising event-clock=realtime consumer=\"gpiomon\""
	num_lines_is 2
	status_is 0

	dut_kill
	dut_wait

	dut_run gpiomon --banner --edges=falling foo baz

	run_prog gpioinfo foo baz

	output_regex_match \
"$sim0 1\\s+\"foo\"\\s+input edges=falling consumer=\"gpiomon\""
	output_regex_match \
"$sim1 3\\s+\"baz\"\\s+input edges=falling consumer=\"gpiomon\""
	num_lines_is 2
	status_is 0
}

test_gpioinfo_with_same_line_twice() {
	gpiosim_chip sim0 num_lines=8 line_name=1:foo

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	# by offset
	run_prog gpioinfo --chip "$sim0" 1 1

	output_regex_match "$sim0 1\\s+\"foo\"\\s+input"
	output_regex_match ".*lines '1' and '1' are the same line"
	num_lines_is 2
	status_is 1

	# by name
	run_prog gpioinfo foo foo

	output_regex_match "$sim0 1\\s+\"foo\"\\s+input"
	output_regex_match ".*lines 'foo' and 'foo' are the same line"
	num_lines_is 2
	status_is 1

	# by name and offset
	run_prog gpioinfo --chip "$sim0" foo 1

	output_regex_match "$sim0 1\\s+\"foo\"\\s+input"
	output_regex_match ".*lines 'foo' and '1' are the same line"
	num_lines_is 2
	status_is 1
}

test_gpioinfo_all_lines_matching_name() {
	gpiosim_chip sim0 num_lines=4 line_name=1:foo line_name=2:bar \
				      line_name=3:foobar
	gpiosim_chip sim1 num_lines=8 line_name=0:baz line_name=2:foobar \
				      line_name=4:xyz line_name=7:foobar
	gpiosim_chip sim2 num_lines=16

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}
	local sim1=${GPIOSIM_CHIP_NAME[sim1]}

	run_prog gpioinfo --strict foobar

	output_regex_match "$sim0 3\\s+\"foobar\"\\s+input"
	output_regex_match "$sim1 2\\s+\"foobar\"\\s+input"
	output_regex_match "$sim1 7\\s+\"foobar\"\\s+input"
	num_lines_is 3
	status_is 1
}

test_gpioinfo_with_lines_strictly_by_name() {
	# not suggesting this setup makes any sense
	# - just test that we can deal with it
	gpiosim_chip sim0 num_lines=8 line_name=1:6 line_name=6:1

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	# first by offset (to show offsets match first)
	run_prog gpioinfo --chip "$sim0" 1 6

	output_regex_match "$sim0 1\\s+\"6\"\\s+input"
	output_regex_match "$sim0 6\\s+\"1\"\\s+input"
	num_lines_is 2
	status_is 0

	# then strictly by name
	run_prog gpioinfo --by-name --chip "$sim0" 1

	output_regex_match "$sim0 6\\s+\"1\"\\s+input"
	num_lines_is 1
	status_is 0
}

test_gpioinfo_with_nonexistent_chip() {
	run_prog gpioinfo --chip nonexistent-chip

	output_regex_match \
".*cannot find GPIO chip character device 'nonexistent-chip'"
	status_is 1
}

test_gpioinfo_with_nonexistent_line() {
	gpiosim_chip sim0 num_lines=8

	run_prog gpioinfo nonexistent-line

	output_regex_match ".*cannot find line 'nonexistent-line'"
	status_is 1

	run_prog gpioinfo --chip "${GPIOSIM_CHIP_NAME[sim0]}" nonexistent-line

	output_regex_match ".*cannot find line 'nonexistent-line'"
	status_is 1
}

test_gpioinfo_with_offset_out_of_range() {
	gpiosim_chip sim0 num_lines=4

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	run_prog gpioinfo --chip "$sim0" 0 1 2 3 4 5

	output_regex_match "$sim0 0\\s+unnamed\\s+input"
	output_regex_match "$sim0 1\\s+unnamed\\s+input"
	output_regex_match "$sim0 2\\s+unnamed\\s+input"
	output_regex_match "$sim0 3\\s+unnamed\\s+input"
	output_regex_match ".*offset 4 is out of range on chip '$sim0'"
	output_regex_match ".*offset 5 is out of range on chip '$sim0'"
	num_lines_is 6
	status_is 1
}

#
# gpioget test cases
#

test_gpioget_by_name() {
	gpiosim_chip sim0 num_lines=8 line_name=1:foo

	gpiosim_set_pull sim0 1 pull-up

	run_prog gpioget foo

	output_is "\"foo\"=active"
	status_is 0

	run_prog gpioget --unquoted foo

	output_is "foo=active"
	status_is 0
}

test_gpioget_by_offset() {
	gpiosim_chip sim0 num_lines=8

	gpiosim_set_pull sim0 1 pull-up

	run_prog gpioget --chip "${GPIOSIM_CHIP_NAME[sim0]}" 1

	output_is "\"1\"=active"
	status_is 0

	run_prog gpioget --unquoted --chip "${GPIOSIM_CHIP_NAME[sim0]}" 1

	output_is "1=active"
	status_is 0
}

test_gpioget_by_symlink() {
	gpiosim_chip sim0 num_lines=8
	gpiosim_chip_symlink sim0 .

	gpiosim_set_pull sim0 1 pull-up

	run_prog gpioget --chip "$GPIOSIM_CHIP_LINK" 1

	output_is "\"1\"=active"
	status_is 0
}

test_gpioget_by_chip_and_name() {
	gpiosim_chip sim0 num_lines=8 line_name=1:foo
	gpiosim_chip sim1 num_lines=8 line_name=3:foo

	gpiosim_set_pull sim1 3 pull-up

	run_prog gpioget --chip "${GPIOSIM_CHIP_NAME[sim1]}" foo

	output_is "\"foo\"=active"
	status_is 0

	run_prog gpioget --unquoted --chip "${GPIOSIM_CHIP_NAME[sim1]}" foo

	output_is "foo=active"
	status_is 0
}

test_gpioget_first_matching_named_line() {
	gpiosim_chip sim0 num_lines=4 line_name=1:foo line_name=2:bar \
				      line_name=3:foobar line_name=7:foobar
	gpiosim_chip sim1 num_lines=8 line_name=0:baz line_name=2:foobar \
				      line_name=4:xyz
	gpiosim_chip sim2 num_lines=16

	gpiosim_set_pull sim0 3 pull-up

	run_prog gpioget foobar

	output_is "\"foobar\"=active"
	status_is 0
}

test_gpioget_multiple_lines() {
	gpiosim_chip sim0 num_lines=8

	gpiosim_set_pull sim0 2 pull-up
	gpiosim_set_pull sim0 3 pull-up
	gpiosim_set_pull sim0 5 pull-up
	gpiosim_set_pull sim0 7 pull-up

	run_prog gpioget --unquoted --chip "${GPIOSIM_CHIP_NAME[sim0]}" 0 1 2 3 4 5 6 7

	output_is \
"0=inactive 1=inactive 2=active 3=active 4=inactive 5=active 6=inactive 7=active"
	status_is 0
}

test_gpioget_multiple_lines_by_name_and_offset() {
	gpiosim_chip sim0 num_lines=8 line_name=1:foo line_name=6:bar
	gpiosim_chip sim1 num_lines=8 line_name=1:baz line_name=3:bar
	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	gpiosim_set_pull sim0 1 pull-up
	gpiosim_set_pull sim0 4 pull-up
	gpiosim_set_pull sim0 6 pull-up

	run_prog gpioget --chip "$sim0" 0 foo 4 bar

	output_is "\"0\"=inactive \"foo\"=active \"4\"=active \"bar\"=active"
	status_is 0
}

test_gpioget_multiple_lines_across_multiple_chips() {
	gpiosim_chip sim0 num_lines=4 line_name=1:foo line_name=2:bar
	gpiosim_chip sim1 num_lines=8 line_name=0:baz line_name=4:xyz

	gpiosim_set_pull sim0 1 pull-up
	gpiosim_set_pull sim1 4 pull-up

	run_prog gpioget baz bar foo xyz

	output_is "\"baz\"=inactive \"bar\"=inactive \"foo\"=active \"xyz\"=active"
	status_is 0
}

test_gpioget_with_numeric_values() {
	gpiosim_chip sim0 num_lines=8

	gpiosim_set_pull sim0 2 pull-up
	gpiosim_set_pull sim0 3 pull-up
	gpiosim_set_pull sim0 5 pull-up
	gpiosim_set_pull sim0 7 pull-up

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	run_prog gpioget --numeric --chip "$sim0" 0 1 2 3 4 5 6 7

	output_is "0 0 1 1 0 1 0 1"
	status_is 0
}

test_gpioget_with_active_low() {
	gpiosim_chip sim0 num_lines=8

	gpiosim_set_pull sim0 2 pull-up
	gpiosim_set_pull sim0 3 pull-up
	gpiosim_set_pull sim0 5 pull-up
	gpiosim_set_pull sim0 7 pull-up

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	run_prog gpioget --active-low --unquoted --chip "$sim0" 0 1 2 3 4 5 6 7

	output_is \
"0=active 1=active 2=inactive 3=inactive 4=active 5=inactive 6=active 7=inactive"
	status_is 0
}

test_gpioget_with_consumer() {
	gpiosim_chip sim0 num_lines=4 line_name=1:foo line_name=2:bar
	gpiosim_chip sim1 num_lines=8 line_name=3:baz line_name=4:xyz

	dut_run gpionotify --banner -F "%l %E %C" foo baz

	run_prog gpioget --consumer gpio-tools-tests foo baz
	status_is 0

	dut_read
	output_regex_match "foo requested gpio-tools-tests"
	output_regex_match "baz requested gpio-tools-tests"
}

test_gpioget_with_pull_up() {
	gpiosim_chip sim0 num_lines=8

	gpiosim_set_pull sim0 2 pull-up
	gpiosim_set_pull sim0 3 pull-up
	gpiosim_set_pull sim0 5 pull-up
	gpiosim_set_pull sim0 7 pull-up

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	run_prog gpioget --bias=pull-up --unquoted --chip "$sim0" 0 1 2 3 4 5 6 7

	output_is \
"0=active 1=active 2=active 3=active 4=active 5=active 6=active 7=active"
	status_is 0
}

test_gpioget_with_pull_down() {
	gpiosim_chip sim0 num_lines=8

	gpiosim_set_pull sim0 2 pull-up
	gpiosim_set_pull sim0 3 pull-up
	gpiosim_set_pull sim0 5 pull-up
	gpiosim_set_pull sim0 7 pull-up

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	run_prog gpioget --bias=pull-down --unquoted --chip "$sim0" 0 1 2 3 4 5 6 7

	output_is \
"0=inactive 1=inactive 2=inactive 3=inactive 4=inactive 5=inactive 6=inactive 7=inactive"
	status_is 0
}

test_gpioget_with_direction_as_is() {
	gpiosim_chip sim0 num_lines=8 line_name=1:foo

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	# flip to output
	run_prog gpioset -t0 foo=1

	status_is 0

	run_prog gpioinfo foo
	output_regex_match "$sim0 1\\s+\"foo\"\\s+output"
	status_is 0

	run_prog gpioget --as-is foo
	# note gpio-sim reverts line to its pull when released
	output_is "\"foo\"=inactive"
	status_is 0

	run_prog gpioinfo foo
	output_regex_match "$sim0 1\\s+\"foo\"\\s+output"
	status_is 0

	# whereas the default behaviour forces to input
	run_prog gpioget foo
	# note gpio-sim reverts line to its pull when released
	# (defaults to pull-down)
	output_is "\"foo\"=inactive"
	status_is 0

	run_prog gpioinfo foo
	output_regex_match "$sim0 1\\s+\"foo\"\\s+input"
	status_is 0
}

test_gpioget_with_hold_period() {
	gpiosim_chip sim0 num_lines=8 line_name=1:foo

	# only test parsing - testing the hold-period itself is tricky
	run_prog gpioget --hold-period=100ms foo
	output_is "\"foo\"=inactive"
	status_is 0
}

test_gpioget_with_strict_named_line_check() {
	gpiosim_chip sim0 num_lines=4 line_name=1:foo line_name=2:bar \
				      line_name=3:foobar
	gpiosim_chip sim1 num_lines=8 line_name=0:baz line_name=2:foobar \
				      line_name=4:xyz line_name=7:foobar
	gpiosim_chip sim2 num_lines=16

	run_prog gpioget --strict foobar

	output_regex_match ".*line 'foobar' is not unique"
	status_is 1
}

test_gpioget_with_lines_by_offset() {
	# not suggesting this setup makes any sense
	# - just test that we can deal with it
	gpiosim_chip sim0 num_lines=8 line_name=1:6 line_name=6:1

	gpiosim_set_pull sim0 1 pull-up
	gpiosim_set_pull sim0 6 pull-down

	run_prog gpioget --chip "${GPIOSIM_CHIP_NAME[sim0]}" 1 6

	output_is "\"1\"=active \"6\"=inactive"
	status_is 0

	run_prog gpioget --unquoted --chip "${GPIOSIM_CHIP_NAME[sim0]}" 1 6

	output_is "1=active 6=inactive"
	status_is 0
}

test_gpioget_with_lines_strictly_by_name() {
	# not suggesting this setup makes any sense
	# - just test that we can deal with it
	gpiosim_chip sim0 num_lines=8 line_name=1:6 line_name=6:1

	gpiosim_set_pull sim0 1 pull-up
	gpiosim_set_pull sim0 6 pull-down

	run_prog gpioget --by-name --chip "${GPIOSIM_CHIP_NAME[sim0]}" 1 6

	output_is "\"1\"=inactive \"6\"=active"
	status_is 0

	run_prog gpioget --by-name --unquoted --chip "${GPIOSIM_CHIP_NAME[sim0]}" 1 6

	output_is "1=inactive 6=active"
	status_is 0
}

test_gpioget_with_no_arguments() {
	run_prog gpioget

	output_regex_match ".*at least one GPIO line must be specified"
	status_is 1
}

test_gpioget_with_chip_but_no_line_specified() {
	gpiosim_chip sim0 num_lines=8

	run_prog gpioget --chip "${GPIOSIM_CHIP_NAME[sim0]}"

	output_regex_match ".*at least one GPIO line must be specified"
	status_is 1
}

test_gpioget_with_offset_out_of_range() {
	gpiosim_chip sim0 num_lines=4
	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	run_prog gpioget --chip "$sim0" 0 1 2 3 4 5

	output_regex_match ".*offset 4 is out of range on chip '$sim0'"
	output_regex_match ".*offset 5 is out of range on chip '$sim0'"
	status_is 1
}

test_gpioget_with_nonexistent_line() {
	run_prog gpioget nonexistent-line

	output_regex_match ".*cannot find line 'nonexistent-line'"
	status_is 1
}

test_gpioget_with_same_line_twice() {
	gpiosim_chip sim0 num_lines=8 line_name=1:foo
	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	# by offset
	run_prog gpioget --chip "$sim0" 0 0

	output_regex_match ".*lines '0' and '0' are the same line"
	status_is 1

	# by name
	run_prog gpioget foo foo

	output_regex_match ".*lines 'foo' and 'foo' are the same line"
	status_is 1

	# by chip and name
	run_prog gpioget --chip "$sim0" foo foo

	output_regex_match ".*lines 'foo' and 'foo' are the same line"
	status_is 1

	# by name and offset
	run_prog gpioget --chip "$sim0" foo 1

	output_regex_match ".*lines 'foo' and '1' are the same line"
	status_is 1

	# by offset and name
	run_prog gpioget --chip "$sim0" 1 foo

	output_regex_match ".*lines '1' and 'foo' are the same line"
	status_is 1
}

test_gpioget_with_invalid_bias() {
	gpiosim_chip sim0 num_lines=8

	run_prog gpioget --bias=bad --chip "${GPIOSIM_CHIP_NAME[sim0]}" 0 1

	output_regex_match ".*invalid bias.*"
	status_is 1
}

test_gpioget_with_invalid_hold_period() {
	gpiosim_chip sim0 num_lines=8

	run_prog gpioget --hold-period=bad --chip "${GPIOSIM_CHIP_NAME[sim0]}" 0

	output_regex_match ".*invalid period.*"
	status_is 1
}

#
# gpioset test cases
#

test_gpioset_by_name() {
	gpiosim_chip sim0 num_lines=8 line_name=1:foo

	dut_run gpioset --banner foo=1

	gpiosim_check_value sim0 1 1
}

test_gpioset_by_offset() {
	gpiosim_chip sim0 num_lines=8

	dut_run gpioset --banner --chip "${GPIOSIM_CHIP_NAME[sim0]}" 1=1

	gpiosim_check_value sim0 1 1
}

test_gpioset_by_symlink() {
	gpiosim_chip sim0 num_lines=8
	gpiosim_chip_symlink sim0 .

	dut_run gpioset --banner --chip "$GPIOSIM_CHIP_LINK" 1=1

	gpiosim_check_value sim0 1 1
}

test_gpioset_by_chip_and_name() {
	gpiosim_chip sim0 num_lines=8 line_name=1:foo
	gpiosim_chip sim1 num_lines=8 line_name=3:foo

	dut_run gpioset --banner --chip "${GPIOSIM_CHIP_NAME[sim1]}" foo=1

	gpiosim_check_value sim1 3 1
}

test_gpioset_first_matching_named_line() {
	gpiosim_chip sim0 num_lines=4 line_name=1:foo line_name=2:bar \
				      line_name=3:foobar
	gpiosim_chip sim1 num_lines=8 line_name=0:baz line_name=2:foobar \
				      line_name=4:xyz line_name=7:foobar
	gpiosim_chip sim2 num_lines=16

	dut_run gpioset --banner foobar=1

	gpiosim_check_value sim0 3 1
}

test_gpioset_multiple_lines() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpioset --banner --chip "$sim0" 0=0 1=0 2=1 3=1 4=1 5=1 6=0 7=1

	gpiosim_check_value sim0 0 0
	gpiosim_check_value sim0 1 0
	gpiosim_check_value sim0 2 1
	gpiosim_check_value sim0 3 1
	gpiosim_check_value sim0 4 1
	gpiosim_check_value sim0 5 1
	gpiosim_check_value sim0 6 0
	gpiosim_check_value sim0 7 1
}

test_gpioset_multiple_lines_by_name_and_offset() {
	gpiosim_chip sim0 num_lines=4 line_name=1:foo line_name=2:bar

	dut_run gpioset --banner --chip "${GPIOSIM_CHIP_NAME[sim0]}" 0=1 foo=1 bar=1 3=1

	gpiosim_check_value sim0 0 1
	gpiosim_check_value sim0 1 1
	gpiosim_check_value sim0 2 1
	gpiosim_check_value sim0 3 1
}


test_gpioset_multiple_lines_across_multiple_chips() {
	gpiosim_chip sim0 num_lines=4 line_name=1:foo line_name=2:bar
	gpiosim_chip sim1 num_lines=8 line_name=0:baz line_name=4:xyz

	dut_run gpioset --banner foo=1 bar=1 baz=1 xyz=1

	gpiosim_check_value sim0 1 1
	gpiosim_check_value sim0 2 1
	gpiosim_check_value sim1 0 1
	gpiosim_check_value sim1 4 1
}

test_gpioset_with_active_low() {
	gpiosim_chip sim0 num_lines=8
	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpioset --banner --active-low -c "$sim0" \
		0=0 1=0 2=1 3=1 4=1 5=1 6=0 7=1

	gpiosim_check_value sim0 0 1
	gpiosim_check_value sim0 1 1
	gpiosim_check_value sim0 2 0
	gpiosim_check_value sim0 3 0
	gpiosim_check_value sim0 4 0
	gpiosim_check_value sim0 5 0
	gpiosim_check_value sim0 6 1
	gpiosim_check_value sim0 7 0
}

test_gpioset_with_consumer() {
	gpiosim_chip sim0 num_lines=4 line_name=1:foo line_name=2:bar
	gpiosim_chip sim1 num_lines=8 line_name=3:baz line_name=4:xyz

	dut_run gpioset --banner --consumer gpio-tools-tests foo=1 baz=0

	run_prog gpioinfo

	output_regex_match "\\s+line\\s+0:\\s+unnamed\\s+input"
	output_regex_match \
"\\s+line\\s+1:\\s+\"foo\"\\s+output consumer=\"gpio-tools-tests\""
	output_regex_match \
"\\s+line\\s+3:\\s+\"baz\"\\s+output consumer=\"gpio-tools-tests\""
	status_is 0
}

test_gpioset_with_push_pull() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpioset --banner --drive=push-pull --chip "$sim0" \
		0=0 1=0 2=1 3=1 4=1 5=1 6=0 7=1

	gpiosim_check_value sim0 0 0
	gpiosim_check_value sim0 1 0
	gpiosim_check_value sim0 2 1
	gpiosim_check_value sim0 3 1
	gpiosim_check_value sim0 4 1
	gpiosim_check_value sim0 5 1
	gpiosim_check_value sim0 6 0
	gpiosim_check_value sim0 7 1
}

test_gpioset_with_open_drain() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	gpiosim_set_pull sim0 2 pull-up
	gpiosim_set_pull sim0 3 pull-up
	gpiosim_set_pull sim0 5 pull-up
	gpiosim_set_pull sim0 7 pull-up

	dut_run gpioset --banner --drive=open-drain --chip "$sim0" \
		0=0 1=0 2=1 3=1 4=1 5=1 6=0 7=1

	gpiosim_check_value sim0 0 0
	gpiosim_check_value sim0 1 0
	gpiosim_check_value sim0 2 1
	gpiosim_check_value sim0 3 1
	gpiosim_check_value sim0 4 0
	gpiosim_check_value sim0 5 1
	gpiosim_check_value sim0 6 0
	gpiosim_check_value sim0 7 1
}

test_gpioset_with_open_source() {
	gpiosim_chip sim0 num_lines=8

	gpiosim_set_pull sim0 2 pull-up
	gpiosim_set_pull sim0 3 pull-up
	gpiosim_set_pull sim0 5 pull-up
	gpiosim_set_pull sim0 7 pull-up

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpioset --banner --drive=open-source --chip "$sim0" \
		0=0 1=0 2=1 3=0 4=1 5=1 6=0 7=1

	gpiosim_check_value sim0 0 0
	gpiosim_check_value sim0 1 0
	gpiosim_check_value sim0 2 1
	gpiosim_check_value sim0 3 1
	gpiosim_check_value sim0 4 1
	gpiosim_check_value sim0 5 1
	gpiosim_check_value sim0 6 0
	gpiosim_check_value sim0 7 1
}

test_gpioset_with_pull_up() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpioset --banner --bias=pull-up --drive=open-drain \
		--chip "$sim0" 0=0 1=0 2=1 3=0 4=1 5=1 6=0 7=1

	gpiosim_check_value sim0 0 0
	gpiosim_check_value sim0 1 0
	gpiosim_check_value sim0 2 1
	gpiosim_check_value sim0 3 0
	gpiosim_check_value sim0 4 1
	gpiosim_check_value sim0 5 1
	gpiosim_check_value sim0 6 0
	gpiosim_check_value sim0 7 1
}

test_gpioset_with_pull_down() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpioset --banner --bias=pull-down --drive=open-source \
		--chip "$sim0" 0=0 1=0 2=1 3=0 4=1 5=1 6=0 7=1

	gpiosim_check_value sim0 0 0
	gpiosim_check_value sim0 1 0
	gpiosim_check_value sim0 2 1
	gpiosim_check_value sim0 3 0
	gpiosim_check_value sim0 4 1
	gpiosim_check_value sim0 5 1
	gpiosim_check_value sim0 6 0
	gpiosim_check_value sim0 7 1
}

test_gpioset_with_value_variants() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	gpiosim_set_pull sim0 0 pull-up
	gpiosim_set_pull sim0 1 pull-down
	gpiosim_set_pull sim0 2 pull-down
	gpiosim_set_pull sim0 3 pull-up
	gpiosim_set_pull sim0 4 pull-down
	gpiosim_set_pull sim0 5 pull-up
	gpiosim_set_pull sim0 6 pull-up
	gpiosim_set_pull sim0 7 pull-down

	dut_run gpioset --banner --chip "$sim0" 0=0 1=1 2=active \
		3=inactive 4=on 5=off 6=false 7=true

	gpiosim_check_value sim0 0 0
	gpiosim_check_value sim0 1 1
	gpiosim_check_value sim0 2 1
	gpiosim_check_value sim0 3 0
	gpiosim_check_value sim0 4 1
	gpiosim_check_value sim0 5 0
	gpiosim_check_value sim0 6 0
	gpiosim_check_value sim0 7 1
}

test_gpioset_with_hold_period() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	gpiosim_set_pull sim0 5 pull-up

	dut_run gpioset --banner --hold-period=1200ms -t0 --chip "$sim0" 0=1 5=0 7=1

	gpiosim_check_value sim0 0 1
	gpiosim_check_value sim0 5 0
	gpiosim_check_value sim0 7 1

	dut_wait

	status_is 0
}

test_gpioset_interactive_exit() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpioset --interactive --chip "$sim0" 1=0 2=1 5=1 6=0 7=1

	gpiosim_check_value sim0 1 0
	gpiosim_check_value sim0 2 1
	gpiosim_check_value sim0 5 1
	gpiosim_check_value sim0 6 0
	gpiosim_check_value sim0 7 1

	dut_write "exit"
	dut_wait

	status_is 0
}

test_gpioset_interactive_help() {
	gpiosim_chip sim0 num_lines=8 line_name=1:foo line_name=4:bar \
				      line_name=7:baz

	dut_run gpioset --interactive foo=1 bar=0 baz=0

	gpiosim_check_value sim0 1 1
	gpiosim_check_value sim0 4 0
	gpiosim_check_value sim0 7 0

	dut_write "help"

	dut_read
	output_regex_match "COMMANDS:.*"
	output_regex_match ".*get \[line\]\.\.\..*"
	output_regex_match ".*set <line=value>\.\.\..*"
	output_regex_match ".*toggle \[line\]\.\.\..*"
	output_regex_match ".*sleep <period>.*"
}

test_gpioset_interactive_get() {
	gpiosim_chip sim0 num_lines=8 line_name=1:foo line_name=4:bar \
				      line_name=7:baz

	dut_run gpioset --interactive foo=1 bar=0 baz=0

	gpiosim_check_value sim0 1 1
	gpiosim_check_value sim0 4 0
	gpiosim_check_value sim0 7 0

	dut_write "get"

	dut_read
	output_regex_match "\"foo\"=active \"bar\"=inactive \"baz\"=inactive"

	dut_write "get bar"

	dut_read
	output_regex_match "\"bar\"=inactive"
}

test_gpioset_interactive_get_unquoted() {
	gpiosim_chip sim0 num_lines=8 line_name=1:foo line_name=4:bar \
				      line_name=7:baz

	dut_run gpioset --interactive --unquoted foo=1 bar=0 baz=0

	gpiosim_check_value sim0 1 1
	gpiosim_check_value sim0 4 0
	gpiosim_check_value sim0 7 0

	dut_write "get"

	dut_read
	output_regex_match "foo=active bar=inactive baz=inactive"

	dut_write "get bar"

	dut_read
	output_regex_match "bar=inactive"
}

test_gpioset_interactive_set() {
	gpiosim_chip sim0 num_lines=8 line_name=1:foo line_name=4:bar \
				      line_name=7:baz

	dut_run gpioset --interactive foo=1 bar=0 baz=0

	gpiosim_check_value sim0 1 1
	gpiosim_check_value sim0 4 0
	gpiosim_check_value sim0 7 0

	dut_write "set bar=active"

	gpiosim_check_value sim0 1 1
	gpiosim_check_value sim0 4 1
	gpiosim_check_value sim0 7 0
	dut_write "get"
	dut_read
	output_regex_match "\"foo\"=active \"bar\"=active \"baz\"=inactive"
}

test_gpioset_interactive_toggle() {
	gpiosim_chip sim0 num_lines=8 line_name=1:foo line_name=4:bar \
				      line_name=7:baz

	gpiosim_set_pull sim0 4 pull-up
	gpiosim_set_pull sim0 7 pull-up

	dut_run gpioset -i foo=1 bar=0 baz=0

	gpiosim_check_value sim0 1 1
	gpiosim_check_value sim0 4 0
	gpiosim_check_value sim0 7 0

	dut_write "toggle"

	gpiosim_check_value sim0 1 0
	gpiosim_check_value sim0 4 1
	gpiosim_check_value sim0 7 1
	dut_write "get"
	dut_read
	output_regex_match "\"foo\"=inactive\\s+\"bar\"=active\\s+\"baz\"=active\\s*"

	dut_write "toggle baz"

	gpiosim_check_value sim0 1 0
	gpiosim_check_value sim0 4 1
	gpiosim_check_value sim0 7 0
	dut_write "get"
	dut_read
	output_regex_match "\"foo\"=inactive\\s+\"bar\"=active\\s+\"baz\"=inactive\\s*"
}

test_gpioset_interactive_sleep() {
	gpiosim_chip sim0 num_lines=8 line_name=1:foo line_name=4:bar \
				      line_name=7:baz

	dut_run gpioset --interactive foo=1 bar=0 baz=0

	dut_write "sleep 500ms"
	dut_flush

	assert_fail dut_readable

	sleep 1

	# prompt, but not a full line...
	dut_readable
}

test_gpioset_toggle_continuous() {
	gpiosim_chip sim0 num_lines=8 line_name=1:foo line_name=4:bar \
				      line_name=7:baz

	gpiosim_set_pull sim0 4 pull-up
	gpiosim_set_pull sim0 7 pull-up

	dut_run gpioset --banner --toggle 100ms foo=1 bar=0 baz=0

	gpiosim_check_value sim0 1 1
	gpiosim_check_value sim0 4 0
	gpiosim_check_value sim0 7 0

	gpiosim_wait_value sim0 1 0
	gpiosim_check_value sim0 4 1
	gpiosim_check_value sim0 7 1


	gpiosim_wait_value sim0 1 1
	gpiosim_check_value sim0 4 0
	gpiosim_check_value sim0 7 0

	gpiosim_wait_value sim0 1 0
	gpiosim_check_value sim0 4 1
	gpiosim_check_value sim0 7 1
}

test_gpioset_toggle_terminated() {
	gpiosim_chip sim0 num_lines=8 line_name=1:foo line_name=4:bar \
				      line_name=7:baz

	gpiosim_set_pull sim0 4 pull-up

	# hold-period to allow test to sample before gpioset exits
	dut_run gpioset --banner --toggle 1s,0 -p 600ms foo=1 bar=0 baz=1

	gpiosim_check_value sim0 1 1
	gpiosim_check_value sim0 4 0
	gpiosim_check_value sim0 7 1

	sleep 1

	gpiosim_check_value sim0 1 0
	gpiosim_check_value sim0 4 1
	gpiosim_check_value sim0 7 0

	dut_wait

	status_is 0

	# using --toggle 0 to exit
	# hold-period to allow test to sample before gpioset exits
	dut_run gpioset --banner -t0 -p 600ms foo=1 bar=0 baz=1

	gpiosim_check_value sim0 1 1
	gpiosim_check_value sim0 4 0
	gpiosim_check_value sim0 7 1

	dut_wait

	status_is 0
}

test_gpioset_with_invalid_toggle_period() {
	gpiosim_chip sim0 num_lines=8 line_name=1:foo line_name=4:bar \
				      line_name=7:baz

	run_prog gpioset --toggle 1ns foo=1 bar=0 baz=0

	output_regex_match ".*invalid period.*"
	status_is 1
}

test_gpioset_with_strict_named_line_check() {
	gpiosim_chip sim0 num_lines=4 line_name=1:foo line_name=2:bar \
				      line_name=3:foobar
	gpiosim_chip sim1 num_lines=8 line_name=0:baz line_name=2:foobar \
				      line_name=4:xyz line_name=7:foobar
	gpiosim_chip sim2 num_lines=16

	run_prog gpioset --strict foobar=active

	output_regex_match ".*line 'foobar' is not unique"
	status_is 1
}

test_gpioset_with_lines_by_offset() {
	# not suggesting this setup makes any sense
	# - just test that we can deal with it
	gpiosim_chip sim0 num_lines=8 line_name=1:6 line_name=6:1

	gpiosim_set_pull sim0 1 pull-down
	gpiosim_set_pull sim0 6 pull-up

	dut_run gpioset --banner --chip "${GPIOSIM_CHIP_NAME[sim0]}" 6=1 1=0

	gpiosim_check_value sim0 1 0
	gpiosim_check_value sim0 6 1
}

test_gpioset_with_lines_strictly_by_name() {
	# not suggesting this setup makes any sense
	# - just test that we can deal with it
	gpiosim_chip sim0 num_lines=8 line_name=1:6 line_name=6:1

	gpiosim_set_pull sim0 1 pull-down
	gpiosim_set_pull sim0 6 pull-up

	dut_run gpioset --banner --by-name --chip "${GPIOSIM_CHIP_NAME[sim0]}" 6=1 1=0

	gpiosim_check_value sim0 1 1
	gpiosim_check_value sim0 6 0
}

test_gpioset_interactive_after_SIGINT() {
	gpiosim_chip sim0 num_lines=8 line_name=1:foo

	dut_run gpioset -i foo=1

	dut_kill -SIGINT
	dut_wait

	status_is 130
}

test_gpioset_interactive_after_SIGTERM() {
	gpiosim_chip sim0 num_lines=8 line_name=1:foo

	dut_run gpioset -i foo=1

	dut_kill -SIGTERM
	dut_wait

	status_is 143
}

test_gpioset_with_no_arguments() {
	run_prog gpioset

	status_is 1
	output_regex_match ".*at least one GPIO line value must be specified"
}

test_gpioset_with_chip_but_no_line_specified() {
	gpiosim_chip sim0 num_lines=8

	run_prog gpioset --chip "${GPIOSIM_CHIP_NAME[sim0]}"

	output_regex_match ".*at least one GPIO line value must be specified"
	status_is 1
}

test_gpioset_with_offset_out_of_range() {
	gpiosim_chip sim0 num_lines=4

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	run_prog gpioset --chip "$sim0" 0=1 1=1 2=1 3=1 4=1 5=1

	output_regex_match ".*offset 4 is out of range on chip '$sim0'"
	output_regex_match ".*offset 5 is out of range on chip '$sim0'"
	status_is 1
}

test_gpioset_with_invalid_hold_period() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	run_prog gpioset --hold-period=bad --chip "$sim0" 0=1

	output_regex_match ".*invalid period.*"
	status_is 1
}

test_gpioset_with_invalid_value() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	# by name
	run_prog gpioset --chip "$sim0" 0=c

	output_regex_match ".*invalid line value.*"
	status_is 1

	# by value
	run_prog gpioset --chip "$sim0" 0=3

	output_regex_match ".*invalid line value.*"
	status_is 1
}

test_gpioset_with_invalid_offset() {
	gpiosim_chip sim0 num_lines=8

	run_prog gpioset --chip "${GPIOSIM_CHIP_NAME[sim0]}" 4000000000=0

	output_regex_match ".*cannot find line '4000000000'"
	status_is 1
}

test_gpioset_with_invalid_bias() {
	gpiosim_chip sim0 num_lines=8

	run_prog gpioset --bias=bad --chip "${GPIOSIM_CHIP_NAME[sim0]}" 0=1 1=1

	output_regex_match ".*invalid bias.*"
	status_is 1
}

test_gpioset_with_invalid_drive() {
	gpiosim_chip sim0 num_lines=8

	run_prog gpioset --drive=bad --chip "${GPIOSIM_CHIP_NAME[sim0]}" 0=1 1=1

	output_regex_match ".*invalid drive.*"
	status_is 1
}

test_gpioset_with_interactive_and_toggle() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	run_prog gpioset --interactive --toggle 1s --chip "$sim0" 0=1

	output_regex_match ".*can't combine interactive with toggle"
	status_is 1
}

test_gpioset_with_nonexistent_line() {
	run_prog gpioset nonexistent-line=0

	output_regex_match ".*cannot find line 'nonexistent-line'"
	status_is 1
}

test_gpioset_with_same_line_twice() {
	gpiosim_chip sim0 num_lines=8 line_name=1:foo

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	# by offset
	run_prog gpioset --chip "$sim0" 0=1 0=1

	output_regex_match ".*lines '0' and '0' are the same line"
	status_is 1

	# by name
	run_prog gpioset --chip "$sim0" foo=1 foo=1

	output_regex_match ".*lines 'foo' and 'foo' are the same line"
	status_is 1

	# by name and offset
	run_prog gpioset --chip "$sim0" foo=1 1=1

	output_regex_match ".*lines 'foo' and '1' are the same line"
	status_is 1

	# by offset and name
	run_prog gpioset --chip "$sim0" 1=1 foo=1

	output_regex_match ".*lines '1' and 'foo' are the same line"
	status_is 1
}

#
# gpiomon test cases
#

test_gpiomon_by_name() {
	gpiosim_chip sim0 num_lines=8 line_name=4:foo

	gpiosim_set_pull sim0 4 pull-up

	dut_run gpiomon --banner --edges=rising foo
	dut_flush

	gpiosim_set_pull sim0 4 pull-down
	gpiosim_set_pull sim0 4 pull-up
	gpiosim_set_pull sim0 4 pull-down
	dut_regex_match "[0-9]+\.[0-9]+\\s+rising\\s+\"foo\""
	assert_fail dut_readable
}

test_gpiomon_by_offset() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	gpiosim_set_pull sim0 4 pull-up

	dut_run gpiomon --banner --edges=rising --chip "$sim0" 4
	dut_regex_match "Monitoring line .*"

	gpiosim_set_pull sim0 4 pull-down
	gpiosim_set_pull sim0 4 pull-up
	gpiosim_set_pull sim0 4 pull-down
	dut_regex_match "[0-9]+\.[0-9]+\\s+rising\\s+$sim0 4"
	assert_fail dut_readable
}

test_gpiomon_by_symlink() {
	gpiosim_chip sim0 num_lines=8
	gpiosim_chip_symlink sim0 .

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	gpiosim_set_pull sim0 4 pull-up

	dut_run gpiomon --banner --edges=rising --chip "$GPIOSIM_CHIP_LINK" 4
	dut_regex_match "Monitoring line .*"

	gpiosim_set_pull sim0 4 pull-down
	gpiosim_set_pull sim0 4 pull-up
	gpiosim_set_pull sim0 4 pull-down
	dut_regex_match "[0-9]+\.[0-9]+\\s+rising\\s+$sim0\\s+4"
	assert_fail dut_readable
}


test_gpiomon_by_chip_and_name() {
	gpiosim_chip sim0 num_lines=8 line_name=0:foo
	gpiosim_chip sim1 num_lines=8 line_name=2:foo

	local sim1=${GPIOSIM_CHIP_NAME[sim1]}

	gpiosim_set_pull sim1 0 pull-up

	dut_run gpiomon --banner --edges=rising --chip "$sim1" foo
	dut_regex_match "Monitoring line .*"

	gpiosim_set_pull sim1 2 pull-down
	gpiosim_set_pull sim1 2 pull-up
	gpiosim_set_pull sim1 2 pull-down
	dut_regex_match "[0-9]+\.[0-9]+\\s+rising\\s+$sim1 2 \"foo\""
	assert_fail dut_readable
}

test_gpiomon_first_matching_named_line() {
	gpiosim_chip sim0 num_lines=4 line_name=1:foo line_name=2:bar \
				      line_name=3:foobar
	gpiosim_chip sim1 num_lines=8 line_name=0:baz line_name=2:foobar \
				      line_name=4:xyz line_name=7:foobar
	gpiosim_chip sim2 num_lines=16

	dut_run gpiomon --banner foobar
	dut_regex_match "Monitoring line .*"

	gpiosim_set_pull sim0 3 pull-up
	dut_regex_match "[0-9]+\.[0-9]+\\s+rising\\s+\"foobar\""
	assert_fail dut_readable
}

test_gpiomon_rising_edge() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	gpiosim_set_pull sim0 4 pull-up

	dut_run gpiomon --banner --edges=rising --chip "$sim0" 4
	dut_flush

	gpiosim_set_pull sim0 4 pull-down
	gpiosim_set_pull sim0 4 pull-up
	gpiosim_set_pull sim0 4 pull-down
	dut_regex_match "[0-9]+\.[0-9]+\\s+rising\\s+$sim0 4"
	assert_fail dut_readable
}

test_gpiomon_falling_edge() {
	gpiosim_chip sim0 num_lines=8
	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	gpiosim_set_pull sim0 4 pull-down

	dut_run gpiomon --banner --edges=falling --chip "$sim0" 4
	dut_flush

	gpiosim_set_pull sim0 4 pull-up
	gpiosim_set_pull sim0 4 pull-down
	gpiosim_set_pull sim0 4 pull-up
	dut_regex_match "[0-9]+\.[0-9]+\\s+falling\\s+$sim0 4"
	assert_fail dut_readable
}

test_gpiomon_both_edges() {
	gpiosim_chip sim0 num_lines=8
	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpiomon --banner --edges=both --chip "$sim0" 4
	dut_regex_match "Monitoring line .*"

	gpiosim_set_pull sim0 4 pull-up
	dut_regex_match "[0-9]+\.[0-9]+\\s+rising\\s+$sim0 4"

	gpiosim_set_pull sim0 4 pull-down
	dut_regex_match "[0-9]+\.[0-9]+\\s+falling\\s+$sim0 4"
}

test_gpiomon_with_pull_up() {
	gpiosim_chip sim0 num_lines=8
	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	gpiosim_set_pull sim0 4 pull-down

	dut_run gpiomon --banner --bias=pull-up --chip "$sim0" 4
	dut_flush

	gpiosim_set_pull sim0 4 pull-down
	dut_regex_match "[0-9]+\.[0-9]+\\s+falling\\s+$sim0 4"

	assert_fail dut_readable
}

test_gpiomon_with_pull_down() {
	gpiosim_chip sim0 num_lines=8
	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	gpiosim_set_pull sim0 4 pull-up

	dut_run gpiomon --banner --bias=pull-down --chip "$sim0" 4
	dut_flush

	gpiosim_set_pull sim0 4 pull-up

	dut_regex_match "[0-9]+\.[0-9]+\\s+rising\\s+$sim0 4"

	assert_fail dut_readable
}

test_gpiomon_with_active_low() {
	gpiosim_chip sim0 num_lines=8
	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	gpiosim_set_pull sim0 4 pull-up

	dut_run gpiomon --banner --active-low --chip "$sim0" 4
	dut_flush

	gpiosim_set_pull sim0 4 pull-down
	dut_regex_match "[0-9]+\.[0-9]+\\s+rising\\s+$sim0 4"

	gpiosim_set_pull sim0 4 pull-up
	dut_regex_match "[0-9]+\.[0-9]+\\s+falling\\s+$sim0 4"

	assert_fail dut_readable
}

test_gpiomon_with_consumer() {
	gpiosim_chip sim0 num_lines=4 line_name=1:foo line_name=2:bar
	gpiosim_chip sim1 num_lines=8 line_name=3:baz line_name=4:xyz

	dut_run gpiomon --banner --consumer gpio-tools-tests foo baz

	run_prog gpioinfo

	output_regex_match "\\s+line\\s+0:\\s+unnamed\\s+input"
	output_regex_match \
"\\s+line\\s+1:\\s+\"foo\"\\s+input edges=both consumer=\"gpio-tools-tests\""
	output_regex_match \
"\\s+line\\s+3:\\s+\"baz\"\\s+input edges=both consumer=\"gpio-tools-tests\""
	status_is 0
}

test_gpiomon_with_quiet_mode() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpiomon --banner --edges=rising --quiet --chip "$sim0" 4
	dut_flush

	gpiosim_set_pull sim0 4 pull-up
	assert_fail dut_readable
}

test_gpiomon_with_unquoted() {
	gpiosim_chip sim0 num_lines=8 line_name=4:foo

	gpiosim_set_pull sim0 4 pull-up

	dut_run gpiomon --banner --unquoted --edges=rising foo
	dut_flush

	gpiosim_set_pull sim0 4 pull-down
	gpiosim_set_pull sim0 4 pull-up
	gpiosim_set_pull sim0 4 pull-down
	dut_regex_match "[0-9]+\.[0-9]+\\s+rising\\s+foo"
	assert_fail dut_readable
}

test_gpiomon_with_num_events() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	# redirect, as gpiomon exits after 4 events
	dut_run_redirect gpiomon --num-events=4 --chip "$sim0" 4

	gpiosim_set_pull sim0 4 pull-up
	sleep 0.01
	gpiosim_set_pull sim0 4 pull-down
	sleep 0.01
	gpiosim_set_pull sim0 4 pull-up
	sleep 0.01
	gpiosim_set_pull sim0 4 pull-down
	sleep 0.01

	dut_wait
	status_is 0
	dut_read_redirect

	regex_matches "[0-9]+\.[0-9]+\\s+rising\\s+$sim0 4" "${lines[0]}"
	regex_matches "[0-9]+\.[0-9]+\\s+falling\\s+$sim0 4" "${lines[1]}"
	regex_matches "[0-9]+\.[0-9]+\\s+rising\\s+$sim0 4" "${lines[2]}"
	regex_matches "[0-9]+\.[0-9]+\\s+falling\\s+$sim0 4" "${lines[3]}"
	num_lines_is 4
}

test_gpiomon_with_debounce_period() {
	gpiosim_chip sim0 num_lines=4 line_name=1:foo line_name=2:bar
	gpiosim_chip sim1 num_lines=8 line_name=3:baz line_name=4:xyz

	dut_run gpiomon --banner --debounce-period 123us foo baz

	run_prog gpioinfo

	output_regex_match "\\s+line\\s+0:\\s+unnamed\\s+input"
	output_regex_match \
"\\s+line\\s+1:\\s+\"foo\"\\s+input edges=both debounce-period=123us"
	output_regex_match \
"\\s+line\\s+3:\\s+\"baz\"\\s+input edges=both debounce-period=123us"
	status_is 0
}

test_gpiomon_with_idle_timeout() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	# redirect, as gpiomon exits
	dut_run_redirect gpiomon --idle-timeout 10ms --chip "$sim0" 4

	dut_wait
	status_is 0
	dut_read_redirect
	num_lines_is 0
}

test_gpiomon_multiple_lines() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpiomon --banner --format=%o --chip "$sim0" 1 3 2 5 4
	dut_regex_match "Monitoring lines .*"

	gpiosim_set_pull sim0 2 pull-up
	dut_regex_match "2"
	gpiosim_set_pull sim0 3 pull-up
	dut_regex_match "3"
	gpiosim_set_pull sim0 4 pull-up
	dut_regex_match "4"

	assert_fail dut_readable
}

test_gpiomon_multiple_lines_by_name_and_offset() {
	gpiosim_chip sim0 num_lines=4 line_name=1:foo line_name=2:bar

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpiomon --banner --format=%o --chip "$sim0" foo bar 3
	dut_regex_match "Monitoring lines .*"

	gpiosim_set_pull sim0 2 pull-up
	dut_regex_match "2"
	gpiosim_set_pull sim0 3 pull-up
	dut_regex_match "3"
	gpiosim_set_pull sim0 1 pull-up
	dut_regex_match "1"

	assert_fail dut_readable
}

test_gpiomon_multiple_lines_across_multiple_chips() {
	gpiosim_chip sim0 num_lines=4 line_name=1:foo line_name=2:bar
	gpiosim_chip sim1 num_lines=8 line_name=0:baz line_name=4:xyz

	dut_run gpiomon --banner --format=%l foo bar baz
	dut_regex_match "Monitoring lines .*"

	gpiosim_set_pull sim0 2 pull-up
	dut_regex_match "bar"
	gpiosim_set_pull sim1 0 pull-up
	dut_regex_match "baz"
	gpiosim_set_pull sim0 1 pull-up
	dut_regex_match "foo"

	assert_fail dut_readable
}

test_gpiomon_exit_after_SIGINT() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpiomon --banner --chip "$sim0" 4
	dut_regex_match "Monitoring line .*"

	dut_kill -SIGINT
	dut_wait

	status_is 130
}

test_gpiomon_exit_after_SIGTERM() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpiomon --banner --chip "$sim0" 4
	dut_regex_match "Monitoring line .*"

	dut_kill -SIGTERM
	dut_wait

	status_is 143
}

test_gpiomon_with_nonexistent_line() {
	run_prog gpiomon nonexistent-line

	status_is 1
	output_regex_match ".*cannot find line 'nonexistent-line'"
}

test_gpiomon_with_same_line_twice() {
	gpiosim_chip sim0 num_lines=8 line_name=1:foo

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	# by offset
	run_prog gpiomon --chip "$sim0" 0 0

	output_regex_match ".*lines '0' and '0' are the same line"
	status_is 1

	# by name
	run_prog gpiomon foo foo

	output_regex_match ".*lines 'foo' and 'foo' are the same line"
	status_is 1

	# by name and offset
	run_prog gpiomon --chip "$sim0" 1 foo

	output_regex_match ".*lines '1' and 'foo' are the same line"
	status_is 1
}

test_gpiomon_with_strict_named_line_check() {
	gpiosim_chip sim0 num_lines=4 line_name=1:foo line_name=2:bar \
				      line_name=3:foobar
	gpiosim_chip sim1 num_lines=8 line_name=0:baz line_name=2:foobar \
				      line_name=4:xyz line_name=7:foobar
	gpiosim_chip sim2 num_lines=16

	run_prog gpiomon --strict foobar

	output_regex_match ".*line 'foobar' is not unique"
	status_is 1
}
test_gpiomon_with_lines_by_offset() {
	# not suggesting this setup makes any sense
	# - just test that we can deal with it
	gpiosim_chip sim0 num_lines=8 line_name=1:6 line_name=6:1

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	gpiosim_set_pull sim0 1 pull-up

	dut_run gpiomon --banner --chip "$sim0" 6 1
	dut_flush

	gpiosim_set_pull sim0 1 pull-down
	dut_regex_match "[0-9]+\.[0-9]+\\s+falling\\s+$sim0 1"

	gpiosim_set_pull sim0 1 pull-up
	dut_regex_match "[0-9]+\.[0-9]+\\s+rising\\s+$sim0 1"

	gpiosim_set_pull sim0 6 pull-up
	dut_regex_match "[0-9]+\.[0-9]+\\s+rising\\s+$sim0 6"

	gpiosim_set_pull sim0 6 pull-down
	dut_regex_match "[0-9]+\.[0-9]+\\s+falling\\s+$sim0 6"

	assert_fail dut_readable
}

test_gpiomon_with_lines_strictly_by_name() {
	# not suggesting this setup makes sense
	# - just test that we can deal with it
	gpiosim_chip sim0 num_lines=8 line_name=1:42 line_name=6:13

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	gpiosim_set_pull sim0 1 pull-up

	dut_run gpiomon --banner --by-name --chip "$sim0" 42 13
	dut_flush

	gpiosim_set_pull sim0 1 pull-down
	dut_regex_match "[0-9]+\.[0-9]+\\s+falling\\s+$sim0 1"

	gpiosim_set_pull sim0 1 pull-up
	dut_regex_match "[0-9]+\.[0-9]+\\s+rising\\s+$sim0 1"

	gpiosim_set_pull sim0 6 pull-up
	dut_regex_match "[0-9]+\.[0-9]+\\s+rising\\s+$sim0 6"

	gpiosim_set_pull sim0 6 pull-down
	dut_regex_match "[0-9]+\.[0-9]+\\s+falling\\s+$sim0 6"

	assert_fail dut_readable
}

test_gpiomon_with_no_arguments() {
	run_prog gpiomon

	output_regex_match ".*at least one GPIO line must be specified"
	status_is 1
}

test_gpiomon_with_no_line_specified() {
	gpiosim_chip sim0 num_lines=8

	run_prog gpiomon --chip "${GPIOSIM_CHIP_NAME[sim0]}"

	output_regex_match ".*at least one GPIO line must be specified"
	status_is 1
}

test_gpiomon_with_offset_out_of_range() {
	gpiosim_chip sim0 num_lines=4

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	run_prog gpiomon --chip "$sim0" 5

	output_regex_match ".*offset 5 is out of range on chip '$sim0'"
	status_is 1
}

test_gpiomon_with_invalid_bias() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	run_prog gpiomon --bias=bad -c "$sim0" 0 1

	output_regex_match ".*invalid bias.*"
	status_is 1
}

test_gpiomon_with_invalid_debounce_period() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	run_prog gpiomon --debounce-period bad -c "$sim0" 0 1

	output_regex_match ".*invalid period: bad"
	status_is 1
}

test_gpiomon_with_invalid_idle_timeout() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	run_prog gpiomon --idle-timeout bad -c "$sim0" 0 1

	output_regex_match ".*invalid period: bad"
	status_is 1
}

test_gpiomon_with_custom_format_event_type_offset() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpiomon --banner "--format=%e %o" -c "$sim0" 4
	dut_flush

	gpiosim_set_pull sim0 4 pull-up
	dut_read
	output_is "1 4"
}

test_gpiomon_with_custom_format_event_type_offset_joined() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpiomon --banner "--format=%e%o" -c "$sim0" 4
	dut_flush

	gpiosim_set_pull sim0 4 pull-up
	dut_read
	output_is "14"
}

test_gpiomon_with_custom_format_edge_chip_and_line() {
	gpiosim_chip sim0 num_lines=8 line_name=4:baz

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpiomon --banner "--format=%e %o %E %c %l" -c "$sim0" baz
	dut_flush

	gpiosim_set_pull sim0 4 pull-up
	dut_regex_match "1 4 rising $sim0 baz"
}

test_gpiomon_with_custom_format_seconds_timestamp() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpiomon --banner "--format=%e %o %S" -c "$sim0" 4
	dut_flush

	gpiosim_set_pull sim0 4 pull-up
	dut_regex_match "1 4 [0-9]+\\.[0-9]+"
}

test_gpiomon_with_custom_format_UTC_timestamp() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpiomon --banner "--format=%U %e %o " --event-clock=realtime \
		-c "$sim0" 4
	dut_flush

	gpiosim_set_pull sim0 4 pull-up
	dut_regex_match \
"[0-9][0-9][0-9][0-9]-[0-1][0-9]-[0-3][0-9]T[0-2][0-9]:[0-5][0-9]:[0-5][0-9]\\.[0-9]+Z 1 4"
}

test_gpiomon_with_custom_format_localtime_timestamp() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpiomon --banner "--format=%L %e %o" --event-clock=realtime \
		-c "$sim0" 4
	dut_flush

	gpiosim_set_pull sim0 4 pull-up
	dut_regex_match \
"[0-9][0-9][0-9][0-9]-[0-1][0-9]-[0-3][0-9]T[0-2][0-9]:[0-5][0-9]:[0-5][0-9]\\.[0-9]+ 1 4"
}

test_gpiomon_with_custom_format_double_percent_sign() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpiomon --banner "--format=start%%end" -c "$sim0" 4
	dut_flush

	gpiosim_set_pull sim0 4 pull-up
	dut_read
	output_is "start%end"
}

test_gpiomon_with_custom_format_double_percent_sign_event_type_specifier() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpiomon --banner "--format=%%e" -c "$sim0" 4
	dut_flush

	gpiosim_set_pull sim0 4 pull-up
	dut_read
	output_is "%e"
}

test_gpiomon_with_custom_format_single_percent_sign() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpiomon --banner "--format=%" -c "$sim0" 4
	dut_flush

	gpiosim_set_pull sim0 4 pull-up
	dut_read
	output_is "%"
}

test_gpiomon_with_custom_format_single_percent_sign_between_other_characters() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpiomon --banner "--format=foo % bar" -c "$sim0" 4
	dut_flush

	gpiosim_set_pull sim0 4 pull-up
	dut_read
	output_is "foo % bar"
}

test_gpiomon_with_custom_format_unknown_specifier() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpiomon --banner "--format=%x" -c "$sim0" 4
	dut_flush

	gpiosim_set_pull sim0 4 pull-up
	dut_read
	output_is "%x"
}

#
# gpionotify test cases
#

test_gpionotify_by_name() {
	gpiosim_chip sim0 num_lines=8 line_name=4:foo

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpionotify --banner foo
	dut_regex_match "Watching line .*"

	request_release_line "$sim0" 4

	dut_regex_match "[0-9]+\.[0-9]+\\s+requested\\s+\"foo\""
	dut_regex_match "[0-9]+\.[0-9]+\\s+released\\s+\"foo\""
	# tools currently have no way to generate a reconfig event
}

test_gpionotify_by_offset() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpionotify --banner --chip "$sim0" 4
	dut_regex_match "Watching line .*"

	request_release_line "$sim0" 4
	dut_regex_match "[0-9]+\.[0-9]+\\s+requested\\s+$sim0 4"
	dut_regex_match "[0-9]+\.[0-9]+\\s+released\\s+$sim0 4"

	assert_fail dut_readable
}

test_gpionotify_by_symlink() {
	gpiosim_chip sim0 num_lines=8
	gpiosim_chip_symlink sim0 .

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpionotify --banner --chip "$GPIOSIM_CHIP_LINK" 4
	dut_regex_match "Watching line .*"

	request_release_line "$sim0" 4
	dut_regex_match "[0-9]+\.[0-9]+\\s+requested\\s+$sim0\\s+4"
	dut_regex_match "[0-9]+\.[0-9]+\\s+released\\s+$sim0\\s+4"

	assert_fail dut_readable
}

test_gpionotify_by_chip_and_name() {
	gpiosim_chip sim0 num_lines=8 line_name=4:foo
	gpiosim_chip sim1 num_lines=8 line_name=2:foo

	local sim1=${GPIOSIM_CHIP_NAME[sim1]}

	dut_run gpionotify --banner --chip "$sim1" foo
	dut_regex_match "Watching line .*"

	request_release_line "$sim1" 2
	dut_regex_match "[0-9]+\.[0-9]+\\s+requested\\s+$sim1 2 \"foo\""
	dut_regex_match "[0-9]+\.[0-9]+\\s+released\\s+$sim1 2 \"foo\""

	assert_fail dut_readable
}

test_gpionotify_first_matching_named_line() {
	gpiosim_chip sim0 num_lines=4 line_name=1:foo line_name=2:bar \
				      line_name=3:foobar
	gpiosim_chip sim1 num_lines=8 line_name=0:baz line_name=2:foobar \
				      line_name=4:xyz line_name=7:foobar
	gpiosim_chip sim2 num_lines=16

	dut_run gpionotify --banner foobar
	dut_regex_match "Watching line .*"

	request_release_line "${GPIOSIM_CHIP_NAME[sim0]}" 3
	dut_regex_match "[0-9]+\.[0-9]+\\s+requested\\s+\"foobar\""
	dut_regex_match "[0-9]+\.[0-9]+\\s+released\\s+\"foobar\""

	assert_fail dut_readable
}

test_gpionotify_with_requested() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	gpiosim_set_pull sim0 4 pull-up

	dut_run gpionotify --banner --event=requested --chip "$sim0" 4
	dut_flush

	request_release_line "${GPIOSIM_CHIP_NAME[sim0]}" 4
	dut_regex_match "[0-9]+\.[0-9]+\\s+requested\\s+$sim0 4"
	assert_fail dut_readable
}

test_gpionotify_with_released() {
	gpiosim_chip sim0 num_lines=8
	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	gpiosim_set_pull sim0 4 pull-down

	dut_run gpionotify --banner --event=released --chip "$sim0" 4
	dut_flush

	request_release_line "${GPIOSIM_CHIP_NAME[sim0]}" 4
	dut_regex_match "[0-9]+\.[0-9]+\\s+released\\s+$sim0 4"
	assert_fail dut_readable
}

test_gpionotify_with_quiet_mode() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpionotify --banner --quiet --chip "$sim0" 4
	dut_flush

	request_release_line "${GPIOSIM_CHIP_NAME[sim0]}" 4
	assert_fail dut_readable
}

test_gpionotify_with_unquoted() {
	gpiosim_chip sim0 num_lines=8 line_name=4:foo

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpionotify --banner --unquoted foo
	dut_regex_match "Watching line .*"

	request_release_line "$sim0" 4

	dut_regex_match "[0-9]+\.[0-9]+\\s+requested\\s+foo"
	dut_regex_match "[0-9]+\.[0-9]+\\s+released\\s+foo"
}

test_gpionotify_with_num_events() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	# redirect, as gpionotify exits after 4 events
	dut_run_redirect gpionotify --num-events=4 --chip "$sim0" 3 4


	request_release_line "${GPIOSIM_CHIP_NAME[sim0]}" 4
	request_release_line "${GPIOSIM_CHIP_NAME[sim0]}" 3

	dut_wait
	status_is 0
	dut_read_redirect

	regex_matches "[0-9]+\.[0-9]+\\s+requested\\s+$sim0 4" "${lines[0]}"
	regex_matches "[0-9]+\.[0-9]+\\s+released\\s+$sim0 4" "${lines[1]}"
	regex_matches "[0-9]+\.[0-9]+\\s+requested\\s+$sim0 3" "${lines[2]}"
	regex_matches "[0-9]+\.[0-9]+\\s+released\\s+$sim0 3" "${lines[3]}"
	num_lines_is 4
}

test_gpionotify_with_idle_timeout() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	# redirect, as gpionotify exits
	dut_run_redirect gpionotify --idle-timeout 10ms --chip "$sim0" 3 4

	dut_wait
	status_is 0
	dut_read_redirect

	num_lines_is 0
}

test_gpionotify_multiple_lines() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpionotify --banner --chip "$sim0" 1 2 3 4 5
	dut_regex_match "Watching lines .*"

	request_release_line "$sim0" 2
	dut_regex_match "[0-9]+\.[0-9]+\\s+requested\\s+$sim0 2"
	dut_regex_match "[0-9]+\.[0-9]+\\s+released\\s+$sim0 2"

	request_release_line "$sim0" 3
	dut_regex_match "[0-9]+\.[0-9]+\\s+requested\\s+$sim0 3"
	dut_regex_match "[0-9]+\.[0-9]+\\s+released\\s+$sim0 3"

	request_release_line "$sim0" 4
	dut_regex_match "[0-9]+\.[0-9]+\\s+requested\\s+$sim0 4"
	dut_regex_match "[0-9]+\.[0-9]+\\s+released\\s+$sim0 4"

	assert_fail dut_readable
}

test_gpionotify_multiple_lines_by_name_and_offset() {
	gpiosim_chip sim0 num_lines=4 line_name=1:foo line_name=2:bar

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpionotify --banner --chip "$sim0" bar foo 3
	dut_regex_match "Watching lines .*"

	request_release_line "$sim0" 2
	dut_regex_match "[0-9]+\.[0-9]+\\s+requested\\s+$sim0 2\\s+\"bar\""
	dut_regex_match "[0-9]+\.[0-9]+\\s+released\\s+$sim0 2\\s+\"bar\""

	request_release_line "$sim0" 1
	dut_regex_match "[0-9]+\.[0-9]+\\s+requested\\s+$sim0 1\\s+\"foo\""
	dut_regex_match "[0-9]+\.[0-9]+\\s+released\\s+$sim0 1\\s+\"foo\""

	request_release_line "$sim0" 3
	dut_regex_match "[0-9]+\.[0-9]+\\s+requested\\s+$sim0 3"
	dut_regex_match "[0-9]+\.[0-9]+\\s+released\\s+$sim0 3"

	assert_fail dut_readable
}

test_gpionotify_multiple_lines_across_multiple_chips() {
	gpiosim_chip sim0 num_lines=4 line_name=1:foo line_name=2:bar
	gpiosim_chip sim1 num_lines=8 line_name=0:baz line_name=4:xyz

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}
	local sim1=${GPIOSIM_CHIP_NAME[sim1]}

	dut_run gpionotify --banner baz bar foo xyz
	dut_regex_match "Watching lines .*"

	request_release_line "$sim0" 2
	dut_regex_match "[0-9]+\.[0-9]+\\s+requested\\s+\"bar\""
	dut_regex_match "[0-9]+\.[0-9]+\\s+released\\s+\"bar\""

	request_release_line "$sim0" 1
	dut_regex_match "[0-9]+\.[0-9]+\\s+requested\\s+\"foo\""
	dut_regex_match "[0-9]+\.[0-9]+\\s+released\\s+\"foo\""

	request_release_line "$sim1" 4
	dut_regex_match "[0-9]+\.[0-9]+\\s+requested\\s+\"xyz\""
	dut_regex_match "[0-9]+\.[0-9]+\\s+released\\s+\"xyz\""

	request_release_line "$sim1" 0
	dut_regex_match "[0-9]+\.[0-9]+\\s+requested\\s+\"baz\""
	dut_regex_match "[0-9]+\.[0-9]+\\s+released\\s+\"baz\""

	assert_fail dut_readable
}

test_gpionotify_exit_after_SIGINT() {
	gpiosim_chip sim0 num_lines=8

	dut_run gpionotify --banner --chip "${GPIOSIM_CHIP_NAME[sim0]}" 4
	dut_regex_match "Watching line .*"

	dut_kill -SIGINT
	dut_wait

	status_is 130
}

test_gpionotify_exit_after_SIGTERM() {
	gpiosim_chip sim0 num_lines=8

	dut_run gpionotify --banner --chip "${GPIOSIM_CHIP_NAME[sim0]}" 4
	dut_regex_match "Watching line .*"

	dut_kill -SIGTERM
	dut_wait

	status_is 143
}

test_gpionotify_with_nonexistent_line() {
	run_prog gpionotify nonexistent-line

	status_is 1
	output_regex_match ".*cannot find line 'nonexistent-line'"
}

test_gpionotify_with_same_line_twice() {
	gpiosim_chip sim0 num_lines=8 line_name=1:foo

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	# by offset
	run_prog gpionotify --chip "$sim0" 0 0

	output_regex_match ".*lines '0' and '0' are the same line"
	num_lines_is 1
	status_is 1

	# by name
	run_prog gpionotify foo foo

	output_regex_match ".*lines 'foo' and 'foo' are the same line"
	num_lines_is 1
	status_is 1

	# by name and offset
	run_prog gpionotify --chip "$sim0" 1 foo

	output_regex_match ".*lines '1' and 'foo' are the same line"
	num_lines_is 1
	status_is 1
}

test_gpionotify_with_strict_named_line_check() {
	gpiosim_chip sim0 num_lines=4 line_name=1:foo line_name=2:bar \
				      line_name=3:foobar
	gpiosim_chip sim1 num_lines=8 line_name=0:baz line_name=2:foobar \
				      line_name=4:xyz line_name=7:foobar
	gpiosim_chip sim2 num_lines=16

	run_prog gpionotify --strict foobar

	output_regex_match ".*line 'foobar' is not unique"
	status_is 1
}

test_gpionotify_with_lines_by_offset() {
	# not suggesting this setup makes any sense
	# - just test that we can deal with it
	gpiosim_chip sim0 num_lines=8 line_name=1:6 line_name=6:1

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpionotify --banner --chip "$sim0" 1
	dut_flush

	request_release_line "$sim0" 1
	dut_regex_match "[0-9]+\.[0-9]+\\s+requested\\s+$sim0 1"
	dut_regex_match "[0-9]+\.[0-9]+\\s+released\\s+$sim0 1"

	request_release_line "$sim0" 6

	assert_fail dut_readable
}

test_gpionotify_with_lines_strictly_by_name() {
	# not suggesting this setup makes any sense
	# - just test that we can deal with it
	gpiosim_chip sim0 num_lines=8 line_name=1:6 line_name=6:1

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpionotify --banner --by-name --chip "$sim0" 1
	dut_flush

	request_release_line "$sim0" 6
	dut_regex_match "[0-9]+\.[0-9]+\\s+requested\\s+$sim0 6 \"1\""
	dut_regex_match "[0-9]+\.[0-9]+\\s+released\\s+$sim0 6 \"1\""

	request_release_line "$sim0" 1
	assert_fail dut_readable
}

test_gpionotify_with_no_arguments() {
	run_prog gpionotify

	output_regex_match ".*at least one GPIO line must be specified"
	status_is 1
}

test_gpionotify_with_no_line_specified() {
	gpiosim_chip sim0 num_lines=8

	run_prog gpionotify --chip "${GPIOSIM_CHIP_NAME[sim0]}"

	output_regex_match ".*at least one GPIO line must be specified"
	status_is 1
}

test_gpionotify_with_offset_out_of_range() {
	gpiosim_chip sim0 num_lines=4

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	run_prog gpionotify --chip "$sim0" 5

	output_regex_match ".*offset 5 is out of range on chip '$sim0'"
	status_is 1
}

test_gpionotify_with_invalid_idle_timeout() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	run_prog gpionotify --idle-timeout bad -c "$sim0" 0 1

	output_regex_match ".*invalid period: bad"
	status_is 1
}

test_gpionotify_with_custom_format_event_type_offset() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpionotify --banner --event=requested "--format=%e %o" -c "$sim0" 4
	dut_flush

	request_release_line "$sim0" 4
	dut_read
	output_is "1 4"
}

test_gpionotify_with_custom_format_event_type_offset_joined() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpionotify --banner --event=requested "--format=%e%o" -c "$sim0" 4
	dut_flush

	request_release_line "$sim0" 4
	dut_read
	output_is "14"
}

test_gpionotify_with_custom_format_event_chip_and_line() {
	gpiosim_chip sim0 num_lines=8 line_name=4:baz

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpionotify --banner --event=released \
		"--format=%e %o %E %c %l" -c "$sim0" baz
	dut_flush

	request_release_line "$sim0" 4
	dut_regex_match "2 4 released $sim0 baz"
}

test_gpionotify_with_custom_format_seconds_timestamp() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpionotify --banner --event=requested "--format=%e %o %S" \
		-c "$sim0" 4
	dut_flush

	request_release_line "$sim0" 4
	dut_regex_match "1 4 [0-9]+\\.[0-9]+"
}

test_gpionotify_with_custom_format_UTC_timestamp() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpionotify --banner --event=released \
		"--format=%U %e %o" -c "$sim0" 4
	dut_flush

	request_release_line "$sim0" 4
	dut_regex_match \
"[0-9][0-9][0-9][0-9]-[0-1][0-9]-[0-3][0-9]T[0-2][0-9]:[0-5][0-9]:[0-5][0-9]\\.[0-9]+Z 2 4"
}

test_gpionotify_with_custom_format_localtime_timestamp() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpionotify --banner --event=released \
		"--format=%L %e %o" -c "$sim0" 4
	dut_flush

	request_release_line "$sim0" 4
	dut_regex_match \
"[0-9][0-9][0-9][0-9]-[0-1][0-9]-[0-3][0-9]T[0-2][0-9]:[0-5][0-9]:[0-5][0-9]\\.[0-9]+ 2 4"
}

test_gpionotify_with_custom_format_double_percent_sign() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpionotify --banner --event=requested "--format=start%%end" \
		-c "$sim0" 4
	dut_flush

	request_release_line "$sim0" 4
	dut_read
	output_is "start%end"
}

test_gpionotify_with_custom_format_double_percent_sign_event_type_specifier() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpionotify --banner --event=requested "--format=%%e" -c "$sim0" 4
	dut_flush

	request_release_line "$sim0" 4
	dut_read
	output_is "%e"
}

test_gpionotify_with_custom_format_single_percent_sign() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpionotify --banner --event=requested "--format=%" -c "$sim0" 4
	dut_flush

	request_release_line "$sim0" 4
	dut_read
	output_is "%"
}

test_gpionotify_with_custom_format_single_percent_sign_between_other_characters() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpionotify --banner --event=requested "--format=foo % bar" -c "$sim0" 4
	dut_flush

	request_release_line "$sim0" 4
	dut_read
	output_is "foo % bar"
}

test_gpionotify_with_custom_format_unknown_specifier() {
	gpiosim_chip sim0 num_lines=8

	local sim0=${GPIOSIM_CHIP_NAME[sim0]}

	dut_run gpionotify --banner --event=requested "--format=%x" -c "$sim0" 4
	dut_flush

	request_release_line "$sim0" 4
	dut_read
	output_is "%x"
}

# shellcheck source=tests/scripts/gpiod-bash-test-helper.inc
source gpiod-bash-test-helper.inc

# shellcheck source=/dev/null
source shunit2