/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
 * Copyright by The HDF Group.                                               *
 * Copyright by the Board of Trustees of the University of Illinois.         *
 * All rights reserved.                                                      *
 *                                                                           *
 * This file is part of HDF.  The full HDF copyright notice, including       *
 * terms governing use, modification, and redistribution, is contained in    *
 * the COPYING file, which can be found at the root of the source code       *
 * distribution tree, or in https://support.hdfgroup.org/ftp/HDF/releases/.  *
 * If you do not have access to either file, you may request a copy from     *
 * help@hdfgroup.org.                                                        *
 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */

/*
 * hdfgifwr.c  - handles writing of GIF files.
 *
 * Contains:
 *   hdfWriteGIF(fp, pic, ptype, w, h, rmap, gmap, bmap, numcols, colorstyle,
 *            comment)
 *
 * Note: slightly brain-damaged, in that it'll only write non-interlaced
 *       GIF files (in the interests of speed, or something)
 *
 */

/*****************************************************************
 * Portions of this code Copyright (C) 1989 by Michael Mauldin.
 * Permission is granted to use this file in whole or in
 * part for any purpose, educational, recreational or commercial,
 * provided that this copyright notice is retained unchanged.
 * This software is available to all free of charge by anonymous
 * FTP and in the UUNET archives.
 *
 *
 * Authors:  Michael Mauldin (mlm@cs.cmu.edu)
 *           David Rowley (mgardi@watdcsu.waterloo.edu)
 *
 * Based on: compress.c - File compression ala IEEE Computer, June 1984.
 *
 *	Spencer W. Thomas       (decvax!harpo!utah-cs!utah-gr!thomas)
 *	Jim McKie               (decvax!mcvax!jim)
 *	Steve Davies            (decvax!vax135!petsd!peora!srd)
 *	Ken Turkowski           (decvax!decwrl!turtlevax!ken)
 *	James A. Woods          (decvax!ihnp4!ames!jaw)
 *	Joe Orost               (decvax!vax135!petsd!joe)
 *****************************************************************/

#include <stdio.h>
#include <stdlib.h>
#include <string.h>

#include "gif.h"

typedef BYTE     byte;
typedef long int count_int;

/* indices into conv24MB */
#define CONV24_8BIT  0
#define CONV24_24BIT 1
#define CONV24_SEP1  2
#define CONV24_LOCK  3
#define CONV24_SEP2  4
#define CONV24_FAST  5
#define CONV24_SLOW  6
#define CONV24_BEST  7
#define CONV24_MAX   8

/* values 'picType' can take */
#define PIC8  CONV24_8BIT
#define PIC24 CONV24_24BIT

/* MONO returns total intensity of r,g,b components */
#define MONO(rd, gn, bl) (((rd) * 11 + (gn) * 16 + (bl) * 5) >> 5) /*.33R+ .5G+ .17B*/

static int  curx, cury;
static long CountDown;
static int  Interlace;

static void compress(int, FILE *, byte *, int);
static void output(int);
static void cl_block(void);
static void cl_hash(count_int);
static void char_init(void);
static void char_out(int);
static void flush_char(void);

static byte pc2nc[256], r1[256], g1[256], b1[256];

/*************************************************************/
int
hdfWriteGIF(FILE *fp, byte *pic, int ptype, int w, int h, byte *rmap, byte *gmap, byte *bmap, byte *pc2ncmap,
            int numcols, int colorstyle, int BitsPerPixel)
{
    int   InitCodeSize;
    int   i;
    byte *pic8;
    pic8 = pic;

    (void)ptype;
    (void)numcols;
    (void)colorstyle;

    Interlace = 0;

    for (i = 0; i < 256; i++) {
        pc2nc[i] = pc2ncmap[i];
        r1[i]    = rmap[i];
        g1[i]    = gmap[i];
        b1[i]    = bmap[i];
    }

    CountDown = w * h; /* # of pixels we'll be doing */

    if (BitsPerPixel <= 1)
        InitCodeSize = 2;
    else
        InitCodeSize = BitsPerPixel;

    curx = cury = 0;

    if (!fp) {
        fprintf(stderr, "WriteGIF: file not open for writing\n");
        return (1);
    }

    compress(InitCodeSize + 1, fp, pic8, w * h);

    if (ferror(fp))
        return -1;
    return (0);
}

/***********************************************************************/
static unsigned long cur_accum = 0;
static int           cur_bits  = 0;

#define MAXCODE(n_bits) ((1 << (n_bits)) - 1)
#define XV_BITS         12   /* BITS was already defined on some systems */
#define HSIZE           5003 /* 80% occupancy */

typedef unsigned char char_type;
static int            n_bits;                    /* number of bits/code */
static int            maxbits = XV_BITS;         /* user settable max # bits/code */
static int            maxcode;                   /* maximum code, given n_bits */
static int            maxmaxcode = 1 << XV_BITS; /* NEVER generate this */

static count_int      htab[HSIZE];
static unsigned short codetab[HSIZE];
#define HashTabOf(i) htab[i]
#define CodeTabOf(i) codetab[i]

static int hsize_g = HSIZE; /* for dynamic table sizing */

/*
 * To save much memory, we overlay the table used by compress() with those
 * used by decompress().  The tab_prefix table is the same size and type
 * as the codetab.  The tab_suffix table needs 2**BITS characters.  We
 * get this from the beginning of htab.  The output stack uses the rest
 * of htab, and contains characters.  There is plenty of room for any
 * possible stack (stack used to be 8000 characters).
 */

#define tab_prefixof(i) CodeTabOf(i)
#define tab_suffixof(i) ((char_type *)(htab))[i]
#define de_stack        ((char_type *)&tab_suffixof(1 << XV_BITS))

static int free_ent = 0; /* first unused entry */

/*
 * block compression parameters -- after all codes are used up,
 * and compression rate changes, start over.
 */
static int clear_flg = 0;

static long int in_count  = 1; /* length of input */
static long int out_count = 0; /* # of codes output (for debugging) */

/*
 * compress stdin to stdout
 *
 * Algorithm:  use open addressing double hashing (no chaining) on the
 * prefix code / next character combination.  We do a variant of Knuth's
 * algorithm D (vol. 3, sec. 6.4) along with G. Knott's relatively-prime
 * secondary probe.  Here, the modular division first probe is gives way
 * to a faster exclusive-or manipulation.  Also do block compression with
 * an adaptive reset, whereby the code table is cleared when the compression
 * ratio decreases, but after the table fills.  The variable-length output
 * codes are re-sized at this point, and a special CLEAR code is generated
 * for the decompressor.  Late addition:  construct the table according to
 * file size for noticeable speed improvement on small files.  Please direct
 * questions about this implementation to ames!jaw.
 */

static int   g_init_bits;
static FILE *g_outfile;

static int ClearCode;
static int EOFCode;

/********************************************************/
static void
compress(int init_bits, FILE *outfile, byte *data, int len)
{
    long fcode;
    int  i = 0;
    int  c;
    int  ent;
    int  disp;
    int  hsize_reg;
    int  hshift;

    /*
     * Set up the globals:  g_init_bits - initial number of bits
     *                      g_outfile   - pointer to output file
     */
    g_init_bits = init_bits;
    g_outfile   = outfile;

    /* initialize 'compress' globals */
    maxbits    = XV_BITS;
    maxmaxcode = 1 << XV_BITS;
    memset(htab, 0, sizeof(htab));
    memset(codetab, 0, sizeof(codetab));
    hsize_g   = HSIZE;
    free_ent  = 0;
    clear_flg = 0;
    in_count  = 1;
    out_count = 0;
    cur_accum = 0;
    cur_bits  = 0;

    /*
     * Set up the necessary values
     */
    out_count = 0;
    clear_flg = 0;
    in_count  = 1;
    maxcode   = MAXCODE(n_bits = g_init_bits);

    ClearCode = (1 << (init_bits - 1));
    EOFCode   = ClearCode + 1;
    free_ent  = ClearCode + 2;

    char_init();
    ent = pc2nc[*data++];
    len--;

    hshift = 0;
    for (fcode = (long)hsize_g; fcode < 65536L; fcode *= 2L)
        hshift++;
    hshift = 8 - hshift; /* set hash code range bound */

    hsize_reg = hsize_g;
    cl_hash((count_int)hsize_reg); /* clear hash table */

    output(ClearCode);

    while (len) {
        c = pc2nc[*data++];
        len--;
        in_count++;

        fcode = (long)(((long)c << maxbits) + ent);
        i     = (((int)c << hshift) ^ ent); /* xor hashing */

        if (HashTabOf(i) == fcode) {
            ent = CodeTabOf(i);
            continue;
        }

        else if ((long)HashTabOf(i) < 0) /* empty slot */
            goto nomatch;

        disp = hsize_reg - i; /* secondary hash (after G. Knott) */
        if (i == 0)
            disp = 1;

probe:
        if ((i -= disp) < 0)
            i += hsize_reg;

        if (HashTabOf(i) == fcode) {
            ent = CodeTabOf(i);
            continue;
        }

        if ((long)HashTabOf(i) >= 0)
            goto probe;

nomatch:
        output(ent);
        out_count++;
        ent = c;

        if (free_ent < maxmaxcode) {
            CodeTabOf(i) = free_ent++; /* code -> hashtable */
            HashTabOf(i) = fcode;
        }
        else
            cl_block();
    }

    /* Put out the final code */
    output(ent);
    out_count++;
    output(EOFCode);
}

/*****************************************************************
 * TAG( output )
 *
 * Output the given code.
 * Inputs:
 *      code:   A n_bits-bit integer.  If == -1, then EOF.  This assumes
 *              that n_bits =< (long)wordsize - 1.
 * Outputs:
 *      Outputs code to the file.
 * Assumptions:
 *      Chars are 8 bits long.
 * Algorithm:
 *      Maintain a BITS character long buffer (so that 8 codes will
 * fit in it exactly).  Use the VAX insv instruction to insert each
 * code in turn.  When the buffer fills up empty it and start over.
 */

static unsigned long masks[] = {0x0000, 0x0001, 0x0003, 0x0007, 0x000F, 0x001F, 0x003F, 0x007F, 0x00FF,
                                0x01FF, 0x03FF, 0x07FF, 0x0FFF, 0x1FFF, 0x3FFF, 0x7FFF, 0xFFFF};

static void
output(int code)
{
    cur_accum &= masks[cur_bits];

    if (cur_bits > 0)
        cur_accum |= ((long)code << cur_bits);
    else
        cur_accum = code;

    cur_bits += n_bits;

    while (cur_bits >= 8) {
        char_out((unsigned int)(cur_accum & 0xff));
        cur_accum >>= 8;
        cur_bits -= 8;
    }

    /*
     * If the next entry is going to be too big for the code size,
     * then increase it, if possible.
     */

    if (free_ent > maxcode || clear_flg) {

        if (clear_flg) {
            maxcode   = MAXCODE(n_bits = g_init_bits);
            clear_flg = 0;
        }
        else {
            n_bits++;
            if (n_bits == maxbits)
                maxcode = maxmaxcode;
            else
                maxcode = MAXCODE(n_bits);
        }
    }

    if (code == EOFCode) {
        /* At EOF, write the rest of the buffer */
        while (cur_bits > 0) {
            char_out((unsigned int)(cur_accum & 0xff));
            cur_accum >>= 8;
            cur_bits -= 8;
        }

        flush_char();

        fflush(g_outfile);
    }
}

/********************************/
static void
cl_block(void) /* table clear for block compress */
{
    /* Clear out the hash table */

    cl_hash((count_int)hsize_g);
    free_ent  = ClearCode + 2;
    clear_flg = 1;

    output(ClearCode);
}

/********************************/
/* reset code table */
static void
cl_hash(count_int hsize)
{
    count_int *htab_p = htab + hsize;
    long       i;
    long       m1 = -1;

    i = hsize - 16;
    do {
        *(htab_p - 16) = m1;
        *(htab_p - 15) = m1;
        *(htab_p - 14) = m1;
        *(htab_p - 13) = m1;
        *(htab_p - 12) = m1;
        *(htab_p - 11) = m1;
        *(htab_p - 10) = m1;
        *(htab_p - 9)  = m1;
        *(htab_p - 8)  = m1;
        *(htab_p - 7)  = m1;
        *(htab_p - 6)  = m1;
        *(htab_p - 5)  = m1;
        *(htab_p - 4)  = m1;
        *(htab_p - 3)  = m1;
        *(htab_p - 2)  = m1;
        *(htab_p - 1)  = m1;
        htab_p -= 16;
    } while ((i -= 16) >= 0);

    for (i += 16; i > 0; i--)
        *--htab_p = m1;
}

/******************************************************************************
 *
 * GIF Specific routines
 *
 ******************************************************************************/

/*
 * Number of characters so far in this 'packet'
 */
static int a_count;

/*
 * Set up the 'byte output' routine
 */
static void
char_init(void)
{
    a_count = 0;
}

/*
 * Define the storage for the packet accumulator
 */
static char accum[256];

/*
 * Add a character to the end of the current packet, and if it is 254
 * characters, flush the packet to disk.
 */
static void
char_out(int c)
{
    accum[a_count++] = c;
    if (a_count >= 254)
        flush_char();
}

/*
 * Flush the packet to disk, and reset the accumulator
 */
static void
flush_char(void)
{
    if (a_count > 0) {
        fputc(a_count, g_outfile);
        fwrite(accum, 1, a_count, g_outfile);
        a_count = 0;
    }
}