#testing init_and_watch

BEGIN { 
    if($ENV{INTERNAL_DEBUG}) {
        require Log::Log4perl::InternalDebug;
        Log::Log4perl::InternalDebug->enable();
    }
}

use warnings;
use strict;

use FindBin qw($Bin);
use lib "$Bin/lib";
use Log4perlInternalTest qw( is_like_windows );
use Test::More;

use Log::Log4perl;
use File::Spec;

sub trunc {
    open FILE, ">$_[0]" or die "Cannot open $_[0]";
    close FILE;
}

BEGIN {
    if ($] < 5.006) {
        plan skip_all => "Only with perl >= 5.006";
    } else {
        plan tests => 34;
    }
}

my $WORK_DIR = "tmp";
if(-d "t") {
    $WORK_DIR = File::Spec->catfile(qw(t tmp));
}

unless (-e "$WORK_DIR"){
    mkdir("$WORK_DIR", 0755) || die "can't create $WORK_DIR ($!)";
}

my $testfile = File::Spec->catfile($WORK_DIR, "test17.log");
my $testfile2 = File::Spec->catfile($WORK_DIR, "test17b.log");
my $testconf = File::Spec->catfile($WORK_DIR, "test17.conf");

END { 
    unlink $testfile if (-e $testfile);
    unlink $testfile2 if (-e $testfile2);
    unlink $testconf if (-e $testconf);
    rmdir $WORK_DIR;
}

trunc($testfile);
trunc($testconf);

my $conf1 = <<EOL;
log4j.category.animal.dog   = INFO, myAppender

log4j.appender.myAppender          = Log::Log4perl::Appender::File
log4j.appender.myAppender.layout   = Log::Log4perl::Layout::SimpleLayout
log4j.appender.myAppender.filename = $testfile
log4j.appender.myAppender.mode     = append

EOL
open (CONF, ">$testconf") || die "can't open $testconf $!";
print CONF $conf1;
close CONF;

Log::Log4perl->init_and_watch($testconf, 1);

my $logger = Log::Log4perl::get_logger('animal.dog');

$logger->debug('debug message');
$logger->info('info message');

ok(! $logger->is_debug(), "is_debug - true");
ok(  $logger->is_info(),  "is_info - true");
ok(  $logger->is_warn(),  "is_warn - true");
ok(  $logger->is_error(), "is_error - true");
ok(  $logger->is_fatal(), "is_fatal - true");

# *********************************************************************
# Check if we really dont re-read the conf file if nothing has changed
# *********************************************************************

my $how_many_reads = $Log::Log4perl::Config::CONFIG_FILE_READS;
print "sleeping for 2 secs\n";
sleep 2;
$logger->is_debug();
is($how_many_reads, $Log::Log4perl::Config::CONFIG_FILE_READS,
   "no re-read until config has changed");

    # Need to sleep for at least a sec, otherwise the watcher
    # wont check
print "sleeping for 2 secs\n";
sleep 2;

# *********************************************************************
# Now, lets check what happens if the config changes
# *********************************************************************

my $conf2 = <<EOL;
log4j.category.animal.dog   = DEBUG, myAppender

log4j.appender.myAppender          = Log::Log4perl::Appender::File
log4j.appender.myAppender.layout = org.apache.log4j.PatternLayout
log4j.appender.myAppender.layout.ConversionPattern=%-5p %c - %m%n

log4j.appender.myAppender.filename = $testfile
log4j.appender.myAppender.mode     = append
EOL

open (CONF, ">$testconf") || die "can't open $testconf $!";
print CONF $conf2;
close CONF;

$logger = Log::Log4perl::get_logger('animal.dog');

$logger->debug('2nd debug message');
is($Log::Log4perl::Config::CONFIG_FILE_READS, 
   $how_many_reads + 1,
   "re-read if config has changed, even if no logger has fired");

$logger->info('2nd info message');
print "sleeping for 2 secs\n";
sleep 2;
$logger->info('2nd info message again');

is($Log::Log4perl::Config::CONFIG_FILE_READS, 
   $how_many_reads + 1,
   "no re-read unless config has changed");

open (LOG, $testfile) or die "can't open $testfile $!";
my @log = <LOG>;
close LOG;
my $log = join('',@log);

is($log, "INFO - info message\nDEBUG animal.dog - 2nd debug message\nINFO  animal.dog - 2nd info message\nINFO  animal.dog - 2nd info message again\n", "1st init");
ok(  $logger->is_debug(), "is_debug - false");
ok(  $logger->is_info(),  "is_info - true");
ok(  $logger->is_warn(),  "is_warn - true");
ok(  $logger->is_error(), "is_error - true");
ok(  $logger->is_fatal(), "is_fatal - true");

# ***************************************************************
# do it 3rd time

print "sleeping for 2 secs\n";
sleep 2;

$conf2 = <<EOL;
log4j.category.animal.dog   = INFO, myAppender

log4j.appender.myAppender          = Log::Log4perl::Appender::File
log4j.appender.myAppender.layout   = Log::Log4perl::Layout::SimpleLayout
log4j.appender.myAppender.filename = $testfile
log4j.appender.myAppender.mode     = append
EOL
open (CONF, ">$testconf") || die "can't open $testconf $!";
print CONF $conf2;
close CONF;

$logger = Log::Log4perl::get_logger('animal.dog');

$logger->debug('2nd debug message');
$logger->info('3rd info message');

ok(! $logger->is_debug(), "is_debug - false");
ok(  $logger->is_info(),  "is_info - true");
ok(  $logger->is_warn(),  "is_warn - true");
ok(  $logger->is_error(), "is_error - true");
ok(  $logger->is_fatal(), "is_fatal - true");

open (LOG, $testfile) or die "can't open $testfile $!";
@log = <LOG>;
close LOG;
$log = join('',@log);

is($log, "INFO - info message\nDEBUG animal.dog - 2nd debug message\nINFO  animal.dog - 2nd info message\nINFO  animal.dog - 2nd info message again\nINFO - 3rd info message\n", "after reload");

SKIP: {
  skip "Signal handling not supported on Win32", 2 if is_like_windows();
   # ***************************************************************
   # Check the 'recreate' feature
   
   trunc($testfile);
   my $conf4 = <<EOL;
   log4j.category.animal.dog   = INFO, myAppender
   
   log4j.appender.myAppender          = Log::Log4perl::Appender::File
   log4j.appender.myAppender.layout   = Log::Log4perl::Layout::SimpleLayout
   log4j.appender.myAppender.filename = $testfile
   log4j.appender.myAppender.recreate = 1
   log4j.appender.myAppender.recreate_check_interval = 0
   log4j.appender.myAppender.mode     = append
EOL
   
   Log::Log4perl->init(\$conf4);
   
   $logger = Log::Log4perl::get_logger('animal.dog');
   $logger->info("test1");
   open (LOG, $testfile) or die "can't open $testfile $!";
   is(scalar <LOG>, "INFO - test1\n", "Before recreate");
   close LOG;
   
   unlink $testfile or die "Cannot unlink $testfile: $!";
   $logger->info("test2");
   open (LOG, $testfile) or die "can't open $testfile $!";
   is(scalar <LOG>, "INFO - test2\n", "After recreate");
   close LOG;
   
   trunc($testfile);
   trunc($testconf);
};


# ***************************************************************
# Check the 'recreate' feature with signal handling

SKIP: {
  skip "File recreation not supported on Win32", 9 if is_like_windows();

  # Use two appenders to confirm that both files are recreated when the
  # signal is received, rather than just whichever watcher was created
  # last.

  my $conf5 = <<EOL;
    log4j.category.animal.dog   = INFO, myAppender1
    log4j.category.animal.cat   = INFO, myAppender2

    log4j.appender.myAppender1          = Log::Log4perl::Appender::File
    log4j.appender.myAppender1.layout   = Log::Log4perl::Layout::SimpleLayout
    log4j.appender.myAppender1.filename = $testfile
    log4j.appender.myAppender1.recreate = 1
    log4j.appender.myAppender1.recreate_check_signal = USR1

    log4j.appender.myAppender2          = Log::Log4perl::Appender::File
    log4j.appender.myAppender2.layout   = Log::Log4perl::Layout::SimpleLayout
    log4j.appender.myAppender2.filename = $testfile2
    log4j.appender.myAppender2.recreate = 1
    log4j.appender.myAppender2.recreate_check_signal = USR1
EOL

  Log::Log4perl->init(\$conf5);
  
  my $logger = Log::Log4perl::get_logger('animal.dog');
  $logger->info("test1");
  ok(-f $testfile, "recreate_signal - testfile created");

  my $logger2 = Log::Log4perl::get_logger('animal.cat');
  $logger2->info("test1");
  ok(-f $testfile2, "recreate_signal - testfile created");

  
  unlink $testfile, $testfile2;
  ok(!-f $testfile, "recreate_signal - testfile deleted");
  ok(!-f $testfile2, "recreate_signal - testfile2 deleted");
  
  $logger->info("test1");
  $logger2->info("test1");
  ok(!-f $testfile, "recreate_signal - testfile still missing");
  ok(!-f $testfile2, "recreate_signal - testfile2 still missing");
  
  ok(kill('USR1', $$), "sending signal");
  $logger->info("test1");
  $logger2->info("test1");
  ok(-f $testfile, "recreate_signal - testfile reinstated");
  ok(-f $testfile2, "recreate_signal - testfile2 reinstated");
};


SKIP: {
  skip "Removing busy files not supported on Win32", 1 if is_like_windows();

    # ***************************************************************
    # Check the 'recreate' feature with check_interval
    
    trunc($testfile);
    my $conf3 = <<EOL;
    log4j.category.animal.dog   = INFO, myAppender
    
    log4j.appender.myAppender          = Log::Log4perl::Appender::File
    log4j.appender.myAppender.layout   = Log::Log4perl::Layout::SimpleLayout
    log4j.appender.myAppender.filename = $testfile
    log4j.appender.myAppender.recreate = 1
    log4j.appender.myAppender.recreate_check_interval = 1
    log4j.appender.myAppender.mode     = append
EOL
    
      # Create logfile
    Log::Log4perl->init(\$conf3);
      # ... and immediately remove it
    unlink $testfile or die "cannot remove file $testfile ($!)";
    
    print "sleeping for 2 secs\n";
    sleep(2);
    
    $logger = Log::Log4perl::get_logger('animal.dog');
    $logger->info("test1");
    open (LOG, $testfile) or die "can't open $testfile $!";
    is(scalar <LOG>, "INFO - test1\n", "recreate before first write");
    close LOG;
}

# ***************************************************************
# Check the 'recreate' feature with check_interval (2nd write)

SKIP: {
  skip "Signal handling not supported on Win32", 1 if is_like_windows();
    trunc($testfile);
    my $conf3 = <<EOL;
    log4j.category.animal.dog   = INFO, myAppender

    log4j.appender.myAppender          = Log::Log4perl::Appender::File
    log4j.appender.myAppender.layout   = Log::Log4perl::Layout::SimpleLayout
    log4j.appender.myAppender.filename = $testfile
    log4j.appender.myAppender.recreate = 1
    log4j.appender.myAppender.recreate_check_interval = 1
    log4j.appender.myAppender.mode     = append
EOL

      # Create logfile
    Log::Log4perl->init(\$conf3);

      # Write to it
    $logger = Log::Log4perl::get_logger('animal.dog');
    $logger->info("test1");

      # ... remove it (stupid windoze cannot remove an open file)
    rename $testfile, "$testfile.old";
    unlink $testfile;

    print "sleeping for 2 secs\n";
    sleep(2);

      # ... write again
    $logger->info("test2");

    open (LOG, $testfile) or die "can't open $testfile $!";
    is(scalar <LOG>, "INFO - test2\n", "recreate before 2nd write");
    close LOG;
    unlink "$testfile.old";
};

# ***************************************************************
# Check the 'recreate' feature with moved/recreated file

SKIP: {
  skip "Moving busy files not supported on Win32", 1 if is_like_windows();

    trunc($testfile);
    my $conf3 = <<EOL;
    log4j.category.animal.dog   = INFO, myAppender

    log4j.appender.myAppender          = Log::Log4perl::Appender::File
    log4j.appender.myAppender.layout   = Log::Log4perl::Layout::SimpleLayout
    log4j.appender.myAppender.filename = $testfile
    log4j.appender.myAppender.recreate = 1
    log4j.appender.myAppender.recreate_check_interval = 1
    log4j.appender.myAppender.mode     = append
EOL

      # Create logfile
    Log::Log4perl->init(\$conf3);

      # Get a logger, but dont write to it
    $logger = Log::Log4perl::get_logger('animal.dog');

    rename "$testfile", "$testfile.old" or die "Cannot rename ($!)";
      # recreate it
    trunc($testfile);

    print "sleeping for 2 secs\n";
    sleep(2);

      # ... write to (hopefully) truncated file
    $logger->info("test3");

    open (LOG, $testfile) or die "can't open $testfile $!";
    is(scalar <LOG>, "INFO - test3\n", "log to externally recreated file");
    close LOG;

    unlink "$testfile.old";
};