/*
 * Load_xm.cpp
 * -----------
 * Purpose: XM (FastTracker II) module loader / saver
 * Notes  : (currently none)
 * Authors: Olivier Lapicque
 *          OpenMPT Devs
 * The OpenMPT source code is released under the BSD license. Read LICENSE for more details.
 */


#include "stdafx.h"
#include "Loaders.h"
#include "../common/version.h"
#include "XMTools.h"
#include "mod_specifications.h"
#ifndef MODPLUG_NO_FILESAVE
#include "mpt/io/base.hpp"
#include "mpt/io/io.hpp"
#include "mpt/io/io_stdstream.hpp"
#include "../common/mptFileIO.h"
#endif
#include "OggStream.h"
#include <algorithm>
#ifdef MODPLUG_TRACKER
#include "../mptrack/TrackerSettings.h"	// For super smooth ramping option
#endif // MODPLUG_TRACKER
#include "mpt/audio/span.hpp"

#if defined(MPT_WITH_VORBIS) && defined(MPT_WITH_VORBISFILE)
#include <sstream>
#endif

#if defined(MPT_WITH_VORBIS)
#if MPT_COMPILER_CLANG
#pragma clang diagnostic push
#pragma clang diagnostic ignored "-Wreserved-id-macro"
#endif // MPT_COMPILER_CLANG
#include <vorbis/codec.h>
#if MPT_COMPILER_CLANG
#pragma clang diagnostic pop
#endif // MPT_COMPILER_CLANG
#endif

#if defined(MPT_WITH_VORBISFILE)
#if MPT_COMPILER_CLANG
#pragma clang diagnostic push
#pragma clang diagnostic ignored "-Wreserved-id-macro"
#endif // MPT_COMPILER_CLANG
#include <vorbis/vorbisfile.h>
#if MPT_COMPILER_CLANG
#pragma clang diagnostic pop
#endif // MPT_COMPILER_CLANG
#include "openmpt/soundbase/Copy.hpp"
#endif

#ifdef MPT_WITH_STBVORBIS
#include <stb_vorbis/stb_vorbis.c>
#include "openmpt/soundbase/Copy.hpp"
#endif // MPT_WITH_STBVORBIS


OPENMPT_NAMESPACE_BEGIN



#if defined(MPT_WITH_VORBIS) && defined(MPT_WITH_VORBISFILE)

static size_t VorbisfileFilereaderRead(void *ptr, size_t size, size_t nmemb, void *datasource)
{
	FileReader &file = *mpt::void_ptr<FileReader>(datasource);
	return file.ReadRaw(mpt::span(mpt::void_cast<std::byte*>(ptr), size * nmemb)).size() / size;
}

static int VorbisfileFilereaderSeek(void *datasource, ogg_int64_t offset, int whence)
{
	FileReader &file = *mpt::void_ptr<FileReader>(datasource);
	switch(whence)
	{
	case SEEK_SET:
		{
			if(!mpt::in_range<FileReader::pos_type>(offset))
			{
				return -1;
			}
			return file.Seek(mpt::saturate_cast<FileReader::pos_type>(offset)) ? 0 : -1;
		}
		break;
	case SEEK_CUR:
		{
			if(offset < 0)
			{
				if(offset == std::numeric_limits<ogg_int64_t>::min())
				{
					return -1;
				}
				if(!mpt::in_range<FileReader::pos_type>(0-offset))
				{
					return -1;
				}
				return file.SkipBack(mpt::saturate_cast<FileReader::pos_type>(0 - offset)) ? 0 : -1;
			} else
			{
				if(!mpt::in_range<FileReader::pos_type>(offset))
				{
					return -1;
				}
				return file.Skip(mpt::saturate_cast<FileReader::pos_type>(offset)) ? 0 : -1;
			}
		}
		break;
	case SEEK_END:
		{
			if(!mpt::in_range<FileReader::pos_type>(offset))
			{
				return -1;
			}
			if(!mpt::in_range<FileReader::pos_type>(file.GetLength() + offset))
			{
				return -1;
			}
			return file.Seek(mpt::saturate_cast<FileReader::pos_type>(file.GetLength() + offset)) ? 0 : -1;
		}
		break;
	default:
		return -1;
	}
}

static long VorbisfileFilereaderTell(void *datasource)
{
	FileReader &file = *mpt::void_ptr<FileReader>(datasource);
	FileReader::pos_type result = file.GetPosition();
	if(!mpt::in_range<long>(result))
	{
		return -1;
	}
	return static_cast<long>(result);
}

#endif // MPT_WITH_VORBIS && MPT_WITH_VORBISFILE


// Allocate samples for an instrument
static std::vector<SAMPLEINDEX> AllocateXMSamples(CSoundFile &sndFile, SAMPLEINDEX numSamples)
{
	LimitMax(numSamples, SAMPLEINDEX(32));

	std::vector<SAMPLEINDEX> foundSlots;
	foundSlots.reserve(numSamples);

	for(SAMPLEINDEX i = 0; i < numSamples; i++)
	{
		SAMPLEINDEX candidateSlot = sndFile.GetNumSamples() + 1;

		if(candidateSlot >= MAX_SAMPLES)
		{
			// If too many sample slots are needed, try to fill some empty slots first.
			for(SAMPLEINDEX j = 1; j <= sndFile.GetNumSamples(); j++)
			{
				if(sndFile.GetSample(j).HasSampleData())
				{
					continue;
				}

				if(!mpt::contains(foundSlots, j))
				{
					// Empty sample slot that is not occupied by the current instrument. Yay!
					candidateSlot = j;

					// Remove unused sample from instrument sample assignments
					for(INSTRUMENTINDEX ins = 1; ins <= sndFile.GetNumInstruments(); ins++)
					{
						if(sndFile.Instruments[ins] == nullptr)
						{
							continue;
						}
						for(auto &sample : sndFile.Instruments[ins]->Keyboard)
						{
							if(sample == candidateSlot)
							{
								sample = 0;
							}
						}
					}
					break;
				}
			}
		}

		if(candidateSlot >= MAX_SAMPLES)
		{
			// Still couldn't find any empty sample slots, so look out for existing but unused samples.
			std::vector<bool> usedSamples;
			SAMPLEINDEX unusedSampleCount = sndFile.DetectUnusedSamples(usedSamples);

			if(unusedSampleCount > 0)
			{
				sndFile.RemoveSelectedSamples(usedSamples);
				// Remove unused samples from instrument sample assignments
				for(INSTRUMENTINDEX ins = 1; ins <= sndFile.GetNumInstruments(); ins++)
				{
					if(sndFile.Instruments[ins] == nullptr)
					{
						continue;
					}
					for(auto &sample : sndFile.Instruments[ins]->Keyboard)
					{
						if(sample < usedSamples.size() && !usedSamples[sample])
						{
							sample = 0;
						}
					}
				}

				// New candidate slot is first unused sample slot.
				candidateSlot = static_cast<SAMPLEINDEX>(std::find(usedSamples.begin() + 1, usedSamples.end(), false) - usedSamples.begin());
			} else
			{
				// No unused sample slots: Give up :(
				break;
			}
		}

		if(candidateSlot < MAX_SAMPLES)
		{
			foundSlots.push_back(candidateSlot);
			if(candidateSlot > sndFile.GetNumSamples())
			{
				sndFile.m_nSamples = candidateSlot;
			}
		}
	}

	return foundSlots;
}


// Read .XM patterns
static void ReadXMPatterns(FileReader &file, const XMFileHeader &fileHeader, CSoundFile &sndFile)
{
	// Reading patterns
	sndFile.Patterns.ResizeArray(fileHeader.patterns);
	for(PATTERNINDEX pat = 0; pat < fileHeader.patterns; pat++)
	{
		FileReader::pos_type curPos = file.GetPosition();
		const uint32 headerSize = file.ReadUint32LE();
		if(headerSize < 8 || !file.CanRead(headerSize - 4))
			break;
		file.Skip(1);  // Pack method (= 0)

		ROWINDEX numRows;
		if(fileHeader.version == 0x0102)
			numRows = file.ReadUint8() + 1;
		else
			numRows = file.ReadUint16LE();

		// A packed size of 0 indicates a completely empty pattern.
		const uint16 packedSize = file.ReadUint16LE();

		if(numRows == 0)
			numRows = 64;
		else if(numRows > MAX_PATTERN_ROWS)
			numRows = MAX_PATTERN_ROWS;

		file.Seek(curPos + headerSize);
		FileReader patternChunk = file.ReadChunk(packedSize);

		if(pat >= MAX_PATTERNS || !sndFile.Patterns.Insert(pat, numRows) || packedSize == 0)
			continue;

		enum PatternFlags
		{
			isPackByte		= 0x80,
			allFlags		= 0xFF,

			notePresent		= 0x01,
			instrPresent	= 0x02,
			volPresent		= 0x04,
			commandPresent	= 0x08,
			paramPresent	= 0x10,
		};

		for(auto &m : sndFile.Patterns[pat])
		{
			if(!file.CanRead(1))
				break;

			uint8 info = patternChunk.ReadUint8();

			uint8 vol = 0, command = 0;
			if(info & isPackByte)
			{
				// Interpret byte as flag set.
				if(info & notePresent) m.note = patternChunk.ReadUint8();
			} else
			{
				// Interpret byte as note, read all other pattern fields as well.
				m.note = info;
				info = allFlags;
			}

			if(info & instrPresent) m.instr = patternChunk.ReadUint8();
			if(info & volPresent) vol = patternChunk.ReadUint8();
			if(info & commandPresent) command = patternChunk.ReadUint8();
			if(info & paramPresent) m.param = patternChunk.ReadUint8();

			if(m.note == 97)
			{
				m.note = NOTE_KEYOFF;
			} else if(m.note > 0 && m.note < 97)
			{
				m.note += 12;
			} else
			{
				m.note = NOTE_NONE;
			}

			if(command | m.param)
			{
				CSoundFile::ConvertModCommand(m, command, m.param);
			} else
			{
				m.command = CMD_NONE;
			}

			if(m.instr == 0xFF)
			{
				m.instr = 0;
			}

			if(vol >= 0x10 && vol <= 0x50)
			{
				m.volcmd = VOLCMD_VOLUME;
				m.vol = vol - 0x10;
			} else if (vol >= 0x60)
			{
				// Volume commands 6-F translation.
				static constexpr ModCommand::VOLCMD volEffTrans[] =
				{
					VOLCMD_VOLSLIDEDOWN, VOLCMD_VOLSLIDEUP, VOLCMD_FINEVOLDOWN, VOLCMD_FINEVOLUP,
					VOLCMD_VIBRATOSPEED, VOLCMD_VIBRATODEPTH, VOLCMD_PANNING, VOLCMD_PANSLIDELEFT,
					VOLCMD_PANSLIDERIGHT, VOLCMD_TONEPORTAMENTO,
				};

				m.volcmd = volEffTrans[(vol - 0x60) >> 4];
				m.vol = vol & 0x0F;

				if(m.volcmd == VOLCMD_PANNING)
				{
					m.vol *= 4;	// FT2 does indeed not scale panning symmetrically.
				}
			}
		}
	}
}


enum TrackerVersions
{
	verUnknown         =  0x00,  // Probably not made with MPT
	verOldModPlug      =  0x01,  // Made with MPT Alpha / Beta
	verNewModPlug      =  0x02,  // Made with MPT (not Alpha / Beta)
	verModPlugBidiFlag =  0x04,  // MPT up to v1.11 sets both normal loop and pingpong loop flags
	verOpenMPT         =  0x08,  // Made with OpenMPT
	verConfirmed       =  0x10,  // We are very sure that we found the correct tracker version.

	verFT2Generic      =  0x20,  // "FastTracker v2.00", but FastTracker has NOT been ruled out
	verOther           =  0x40,  // Something we don't know, testing for DigiTrakker.
	verFT2Clone        =  0x80,  // NOT FT2: itype changed between instruments, or \0 found in song title
	verPlayerPRO       = 0x100,  // Could be PlayerPRO
	verDigiTrakker     = 0x200,  // Probably DigiTrakker
	verUNMO3           = 0x400,  // TODO: UNMO3-ed XMs are detected as MPT 1.16
	verEmptyOrders     = 0x800,  // Allow empty order list like in OpenMPT (FT2 just plays pattern 0 if the order list is empty according to the header)
};
DECLARE_FLAGSET(TrackerVersions)


static bool ValidateHeader(const XMFileHeader &fileHeader)
{
	if(fileHeader.channels == 0
		|| fileHeader.channels > MAX_BASECHANNELS
		|| std::memcmp(fileHeader.signature, "Extended Module: ", 17)
		)
	{
		return false;
	}
	return true;
}


static uint64 GetHeaderMinimumAdditionalSize(const XMFileHeader &fileHeader)
{
	return fileHeader.orders + 4 * (fileHeader.patterns + fileHeader.instruments);
}


CSoundFile::ProbeResult CSoundFile::ProbeFileHeaderXM(MemoryFileReader file, const uint64 *pfilesize)
{
	XMFileHeader fileHeader;
	if(!file.ReadStruct(fileHeader))
	{
		return ProbeWantMoreData;
	}
	if(!ValidateHeader(fileHeader))
	{
		return ProbeFailure;
	}
	return ProbeAdditionalSize(file, pfilesize, GetHeaderMinimumAdditionalSize(fileHeader));
}


static bool ReadSampleData(ModSample &sample, SampleIO sampleFlags, FileReader &sampleChunk, bool &isOXM)
{
	bool unsupportedSample = false;

	bool isOGG = false;
	if(sampleChunk.CanRead(8))
	{
		isOGG = true;
		sampleChunk.Skip(4);
		// In order to avoid false-detecting PCM as OggVorbis as much as possible,
		// we parse and verify the complete sample data and only assume OggVorbis,
		// if all Ogg checksums are correct a no single byte of non-Ogg data exists.
		// The fast-path for regular PCM will only check "OggS" magic and do no other work after failing that check.
		while(!sampleChunk.EndOfFile())
		{
			if(!Ogg::ReadPage(sampleChunk))
			{
				isOGG = false;
				break;
			}
		}
	}
	isOXM = isOXM || isOGG;
	sampleChunk.Rewind();
	if(isOGG)
	{
		uint32 originalSize = sampleChunk.ReadInt32LE();
		FileReader sampleData = sampleChunk.ReadChunk(sampleChunk.BytesLeft());

		sample.uFlags.set(CHN_16BIT, sampleFlags.GetBitDepth() >= 16);
		sample.uFlags.set(CHN_STEREO, sampleFlags.GetChannelFormat() != SampleIO::mono);
		sample.nLength = originalSize / (sample.uFlags[CHN_16BIT] ? 2 : 1) / (sample.uFlags[CHN_STEREO] ? 2 : 1);

#if defined(MPT_WITH_VORBIS) && defined(MPT_WITH_VORBISFILE)

		ov_callbacks callbacks = {
			&VorbisfileFilereaderRead,
			&VorbisfileFilereaderSeek,
			NULL,
			&VorbisfileFilereaderTell
		};
		OggVorbis_File vf;
		MemsetZero(vf);
		if(ov_open_callbacks(mpt::void_ptr<FileReader>(&sampleData), &vf, nullptr, 0, callbacks) == 0)
		{
			if(ov_streams(&vf) == 1)
			{ // we do not support chained vorbis samples
				vorbis_info *vi = ov_info(&vf, -1);
				if(vi && vi->rate > 0 && vi->channels > 0)
				{
					sample.AllocateSample();
					SmpLength offset = 0;
					int channels = vi->channels;
					int current_section = 0;
					long decodedSamples = 0;
					bool eof = false;
					while(!eof && offset < sample.nLength && sample.HasSampleData())
					{
						float **output = nullptr;
						long ret = ov_read_float(&vf, &output, 1024, &current_section);
						if(ret == 0)
						{
							eof = true;
						} else if(ret < 0)
						{
							// stream error, just try to continue
						} else
						{
							decodedSamples = ret;
							LimitMax(decodedSamples, mpt::saturate_cast<long>(sample.nLength - offset));
							if(offset == 0 && channels == 1 && sample.GetNumChannels() == 2)
							{
								// oggmod doesn't know what stereo samples are, so it treats them as mono samples, but doesn't clear the unknown stereo flag.
								// We just take the left channel in this case, as it is difficult (if possible at all) to properly reconstruct the waveform of the right channel.
								// Due to XM's delta-encoding and Vorbis being a lossless codec, samples could distort easily even when the delta encoding was off by a very small amount.
								sample.uFlags.reset(CHN_STEREO);
							}
							if(decodedSamples > 0 && channels == sample.GetNumChannels())
							{
								if(sample.uFlags[CHN_16BIT])
								{
									CopyAudio(mpt::audio_span_interleaved(sample.sample16() + (offset * sample.GetNumChannels()), sample.GetNumChannels(), decodedSamples), mpt::audio_span_planar(output, channels, decodedSamples));
								} else
								{
									CopyAudio(mpt::audio_span_interleaved(sample.sample8() + (offset * sample.GetNumChannels()), sample.GetNumChannels(), decodedSamples), mpt::audio_span_planar(output, channels, decodedSamples));
								}
							}
							offset += static_cast<SmpLength>(decodedSamples);
						}
					}
				} else
				{
					unsupportedSample = true;
				}
			} else
			{
				unsupportedSample = true;
			}
			ov_clear(&vf);
		} else
		{
			unsupportedSample = true;
		}

#elif defined(MPT_WITH_STBVORBIS)

		// NOTE/TODO: stb_vorbis does not handle inferred negative PCM sample
		// position at stream start. (See
		// <https://www.xiph.org/vorbis/doc/Vorbis_I_spec.html#x1-132000A.2>).
		// This means that, for remuxed and re-aligned/cutted (at stream start)
		// Vorbis files, stb_vorbis will include superfluous samples at the
		// beginning. OXM files with this property are yet to be spotted in the
		// wild, thus, this behaviour is currently not problematic.

		int consumed = 0, error = 0;
		stb_vorbis *vorb = nullptr;
		FileReader::PinnedView sampleDataView = sampleData.GetPinnedView();
		const std::byte* data = sampleDataView.data();
		std::size_t dataLeft = sampleDataView.size();
		vorb = stb_vorbis_open_pushdata(mpt::byte_cast<const unsigned char*>(data), mpt::saturate_cast<int>(dataLeft), &consumed, &error, nullptr);
		sampleData.Skip(consumed);
		data += consumed;
		dataLeft -= consumed;
		if(vorb)
		{
			// Header has been read, proceed to reading the sample data
			sample.AllocateSample();
			SmpLength offset = 0;
			while((error == VORBIS__no_error || (error == VORBIS_need_more_data && dataLeft > 0))
				&& offset < sample.nLength && sample.HasSampleData())
			{
				int channels = 0, decodedSamples = 0;
				float **output;
				consumed = stb_vorbis_decode_frame_pushdata(vorb, mpt::byte_cast<const unsigned char*>(data), mpt::saturate_cast<int>(dataLeft), &channels, &output, &decodedSamples);
				sampleData.Skip(consumed);
				data += consumed;
				dataLeft -= consumed;
				LimitMax(decodedSamples, mpt::saturate_cast<int>(sample.nLength - offset));
				if(decodedSamples > 0 && channels == sample.GetNumChannels())
				{
					if(sample.uFlags[CHN_16BIT])
					{
						CopyAudio(mpt::audio_span_interleaved(sample.sample16() + (offset * sample.GetNumChannels()), sample.GetNumChannels(), decodedSamples), mpt::audio_span_planar(output, channels, decodedSamples));
					} else
					{
						CopyAudio(mpt::audio_span_interleaved(sample.sample8() + (offset * sample.GetNumChannels()), sample.GetNumChannels(), decodedSamples), mpt::audio_span_planar(output, channels, decodedSamples));
					}
				}
				offset += decodedSamples;
				error = stb_vorbis_get_error(vorb);
			}
			stb_vorbis_close(vorb);
		} else
		{
			unsupportedSample = true;
		}

#else // !VORBIS

		unsupportedSample = true;

#endif // VORBIS

	} else
	{
		sampleFlags.ReadSample(sample, sampleChunk);
	}

	return !unsupportedSample;
}


bool CSoundFile::ReadXM(FileReader &file, ModLoadingFlags loadFlags)
{
	file.Rewind();

	XMFileHeader fileHeader;
	if(!file.ReadStruct(fileHeader))
	{
		return false;
	}
	if(!ValidateHeader(fileHeader))
	{
		return false;
	}
	if(!file.CanRead(mpt::saturate_cast<FileReader::pos_type>(GetHeaderMinimumAdditionalSize(fileHeader))))
	{
		return false;
	} else if(loadFlags == onlyVerifyHeader)
	{
		return true;
	}

	InitializeGlobals(MOD_TYPE_XM, fileHeader.channels);
	m_nMixLevels = MixLevels::Compatible;

	FlagSet<TrackerVersions> madeWith(verUnknown);
	mpt::ustring madeWithTracker;
	bool isMadTracker = false;

	if(!memcmp(fileHeader.trackerName, "FastTracker v2.00   ", 20) && fileHeader.size == 276)
	{
		const std::string_view songName{fileHeader.songName, sizeof(fileHeader.songName)};
		if(fileHeader.version < 0x0104)
		{
			madeWith = verFT2Generic | verConfirmed;
		} else if(const auto firstNull = songName.find('\0'); firstNull != std::string_view::npos)
		{
			// FT2 pads the song title with spaces, some other trackers use null chars
			// PlayerPRO filles the remaining buffer after the null terminator with space characters.
			// PlayerPRO does not support song restart position.
			if(fileHeader.restartPos)
				madeWith = verFT2Clone | verNewModPlug | verEmptyOrders;
			else if(firstNull == songName.size() - 1)
				madeWith = verFT2Clone | verNewModPlug | verPlayerPRO | verEmptyOrders;
			else if(songName.find_first_not_of(' ', firstNull + 1) == std::string_view::npos)
				madeWith = verPlayerPRO | verConfirmed;
			else
				madeWith = verFT2Clone | verNewModPlug | verEmptyOrders;
		} else
		{
			if(fileHeader.restartPos)
				madeWith = verFT2Generic | verNewModPlug;
			else
				madeWith = verFT2Generic | verNewModPlug | verPlayerPRO;
		}
	} else if(!memcmp(fileHeader.trackerName, "FastTracker v 2.00  ", 20))
	{
		// MPT 1.0 (exact version to be determined later)
		madeWith = verOldModPlug;
	} else
	{
		// Something else!
		madeWith = verUnknown | verConfirmed;

		madeWithTracker = mpt::ToUnicode(mpt::Charset::CP437, mpt::String::ReadBuf(mpt::String::spacePadded, fileHeader.trackerName));

		if(!memcmp(fileHeader.trackerName, "OpenMPT ", 8))
		{
			madeWith = verOpenMPT | verConfirmed | verEmptyOrders;
		} else if(!memcmp(fileHeader.trackerName, "MilkyTracker ", 12))
		{
			// MilkyTracker prior to version 0.90.87 doesn't set a version string.
			// Luckily, starting with v0.90.87, MilkyTracker also implements the FT2 panning scheme.
			if(memcmp(fileHeader.trackerName + 12, "        ", 8))
			{
				m_nMixLevels = MixLevels::CompatibleFT2;
			}
		} else if(!memcmp(fileHeader.trackerName, "Fasttracker II clone", 20))
		{
			// 8bitbubsy's FT2 clone should be treated exactly like FT2
			madeWith = verFT2Generic | verConfirmed;
		} else if(!memcmp(fileHeader.trackerName, "MadTracker 2.0\0", 15))
		{
			// Fix channel 2 in m3_cha.xm
			m_playBehaviour.reset(kFT2PortaNoNote);
			// Fix arpeggios in kragle_-_happy_day.xm
			m_playBehaviour.reset(kFT2Arpeggio);
			isMadTracker = true;
			if(memcmp(fileHeader.trackerName + 15, "\0\0\0\0", 4))
				madeWithTracker = UL_("MadTracker 2 (registered)");
			else
				madeWithTracker = UL_("MadTracker 2");
		} else if(!memcmp(fileHeader.trackerName, "Skale Tracker\0", 14) || !memcmp(fileHeader.trackerName, "Sk@le Tracker\0", 14))
		{
			m_playBehaviour.reset(kFT2ST3OffsetOutOfRange);
			// Fix arpeggios in KAPTENFL.XM
			m_playBehaviour.reset(kFT2Arpeggio);
		} else if(!memcmp(fileHeader.trackerName, "*Converted ", 11) && !memcmp(fileHeader.trackerName + 14, "-File*", 6))
		{
			madeWith = verDigiTrakker | verConfirmed;
			madeWithTracker = UL_("Digitrakker");
		}
	}

	m_songName = mpt::String::ReadBuf(mpt::String::spacePadded, fileHeader.songName);

	m_nMinPeriod = 1;
	m_nMaxPeriod = 31999;

	Order().SetRestartPos(fileHeader.restartPos);
	m_nInstruments = std::min(static_cast<uint16>(fileHeader.instruments), static_cast<uint16>(MAX_INSTRUMENTS - 1));
	if(fileHeader.speed)
		Order().SetDefaultSpeed(fileHeader.speed);
	if(fileHeader.tempo)
		Order().SetDefaultTempo(Clamp(TEMPO(fileHeader.tempo, 0), ModSpecs::xmEx.GetTempoMin(), ModSpecs::xmEx.GetTempoMax()));

	m_SongFlags.reset();
	m_SongFlags.set(SONG_LINEARSLIDES, (fileHeader.flags & XMFileHeader::linearSlides) != 0);
	m_SongFlags.set(SONG_EXFILTERRANGE, (fileHeader.flags & XMFileHeader::extendedFilterRange) != 0);
	if(m_SongFlags[SONG_EXFILTERRANGE] && madeWith[verNewModPlug])
		madeWith = verFT2Clone | verNewModPlug | verConfirmed | verEmptyOrders;

	ReadOrderFromFile<uint8>(Order(), file, fileHeader.orders);
	if(fileHeader.orders == 0 && !madeWith[verEmptyOrders])
	{
		// Fix lamb_-_dark_lighthouse.xm, which only contains one pattern and an empty order list
		Order().assign(1, 0);
	}
	file.Seek(fileHeader.size + 60);

	if(fileHeader.version >= 0x0104)
	{
		ReadXMPatterns(file, fileHeader, *this);
	}

	bool isOXM = false;

	// In case of XM versions < 1.04, we need to memorize the sample flags for all samples, as they are not stored immediately after the sample headers.
	std::vector<SampleIO> sampleFlags;
	uint8 sampleReserved = 0;
	int16 lastInstrType = -1, lastSampleReserved = -1;
	int64 lastSampleHeaderSize = -1;
	bool unsupportedSamples = false;
	bool anyADPCM = false;
	bool instrumentWithSamplesEncountered = false;

	// Reading instruments
	for(INSTRUMENTINDEX instr = 1; instr <= m_nInstruments; instr++)
	{
		if(!AllocateInstrument(instr))
			return false;
		if(!file.CanRead(4))
			continue;

		// First, try to read instrument header length...
		uint32 headerSize = file.ReadUint32LE();
		if(headerSize == 0)
		{
			headerSize = sizeof(XMInstrumentHeader);
		}

		// Now, read the complete struct.
		file.SkipBack(4);
		XMInstrumentHeader instrHeader;
		file.ReadStructPartial(instrHeader, headerSize);

		// Time for some version detection stuff.
		if(madeWith == verOldModPlug)
		{
			madeWith.set(verConfirmed);
			if(instrHeader.size == 245)
			{
				// ModPlug Tracker Alpha
				m_dwLastSavedWithVersion = MPT_V("1.00.00.A5");
				madeWithTracker = UL_("ModPlug Tracker 1.0 alpha");
			} else if(instrHeader.size == 263)
			{
				// ModPlug Tracker Beta (Beta 1 still behaves like Alpha, but Beta 3.3 does it this way)
				m_dwLastSavedWithVersion = MPT_V("1.00.00.B3");
				madeWithTracker = UL_("ModPlug Tracker 1.0 beta");
			} else
			{
				// WTF?
				madeWith = (verUnknown | verConfirmed);
			}
		} else if(instrHeader.numSamples == 0)
		{
			// Empty instruments make tracker identification pretty easy!
			if(instrHeader.size == 263 && instrHeader.sampleHeaderSize == 0 && madeWith[verNewModPlug])
				madeWith.set(verConfirmed);
			else if(instrHeader.size != 29 && madeWith[verDigiTrakker])
				madeWith.reset(verDigiTrakker);
			else if(madeWith[verFT2Clone | verFT2Generic] && instrHeader.size != 33)
			{
				// Sure isn't FT2.
				// 4-mat's eternity.xm has an empty instruments with a header size of 29.
				// Another module using that size is funky_dumbass.xm. Mysterious!
				// Note: This may happen when the XM Commenter by Aka (XMC.EXE) adds empty instruments at the end of the list,
				// which would explain the latter case, but in eternity.xm the empty slots are not at the end of the list.
				madeWith = verUnknown;
			}
			if(instrHeader.size != 33)
			{
				madeWith.reset(verPlayerPRO);
			} else if(instrHeader.sampleHeaderSize > sizeof(XMSample) && madeWith[verPlayerPRO])
			{
				// Older PlayerPRO versions appear to write garbage in the sampleHeaderSize field, and it's different for each sample.
				// Note: FT2 NORMALLY writes sampleHeaderSize=40 for all samples, but for any instruments before the first
				// instrument that has numSamples != 0, sampleHeaderSize will be uninitialized. It will always be the same
				// value, though.
				if(instrumentWithSamplesEncountered || (lastSampleHeaderSize != -1 && instrHeader.sampleHeaderSize != lastSampleHeaderSize))
					madeWith = verPlayerPRO | verConfirmed;
				lastSampleHeaderSize = instrHeader.sampleHeaderSize;
			}
		}

		instrHeader.ConvertToMPT(*Instruments[instr]);

		if(lastInstrType == -1)
		{
			lastInstrType = instrHeader.type;
		} else if(lastInstrType != instrHeader.type && madeWith[verFT2Generic])
		{
			// FT2 writes some random junk for the instrument type field,
			// but it's always the SAME junk for every instrument saved.
			// Note: This may happen when running an FT2-made XM through PutInst and adding new instrument slots.
			madeWith.reset(verFT2Generic);
			madeWith.set(verFT2Clone);
		}

		if(instrHeader.numSamples > 0)
		{
			instrumentWithSamplesEncountered = true;

			// Yep, there are some samples associated with this instrument.

			// If MIDI settings are present, this is definitely not an old MPT or PlayerPRO.
			if((instrHeader.instrument.midiEnabled | instrHeader.instrument.midiChannel | instrHeader.instrument.midiProgram | instrHeader.instrument.muteComputer) != 0)
				madeWith.reset(verOldModPlug | verNewModPlug | verPlayerPRO);
			if(instrHeader.size != 263 || instrHeader.type != 0)
				madeWith.reset(verPlayerPRO);
			if(!madeWith[verConfirmed] && madeWith[verPlayerPRO])
			{
				// Note: Earlier (?) PlayerPRO versions do not seem to set the loop points to 0xFF (george_megas_-_q.xm)
				if((!(instrHeader.instrument.volFlags & XMInstrument::envLoop) && instrHeader.instrument.volLoopStart == 0xFF && instrHeader.instrument.volLoopEnd == 0xFF)
					|| (!(instrHeader.instrument.panFlags & XMInstrument::envLoop) && instrHeader.instrument.panLoopStart == 0xFF && instrHeader.instrument.panLoopEnd == 0xFF))
				{
					madeWith.set(verConfirmed);
					madeWith.reset(verNewModPlug);
				}
			}

			// Read sample headers
			std::vector<SAMPLEINDEX> sampleSlots = AllocateXMSamples(*this, instrHeader.numSamples);

			// Update sample assignment map
			for(size_t k = 0 + 12; k < 96 + 12; k++)
			{
				if(Instruments[instr]->Keyboard[k] < sampleSlots.size())
				{
					Instruments[instr]->Keyboard[k] = sampleSlots[Instruments[instr]->Keyboard[k]];
				}
			}

			if(fileHeader.version >= 0x0104)
			{
				sampleFlags.clear();
			}
			// Need to memorize those if we're going to skip any samples...
			std::vector<uint32> sampleSize(instrHeader.numSamples);

			// Early versions of Sk@le Tracker set instrHeader.sampleHeaderSize = 0 (IFULOVE.XM)
			// cybernostra weekend has instrHeader.sampleHeaderSize = 0x12, which would leave out the sample name, but FT2 still reads the name.
			MPT_ASSERT(instrHeader.sampleHeaderSize == 0 || instrHeader.sampleHeaderSize == sizeof(XMSample));

			for(SAMPLEINDEX sample = 0; sample < instrHeader.numSamples; sample++)
			{
				XMSample sampleHeader;
				file.ReadStruct(sampleHeader);

				sampleFlags.push_back(sampleHeader.GetSampleFormat());
				sampleSize[sample] = sampleHeader.length;
				sampleReserved |= sampleHeader.reserved;

				if(sampleHeader.reserved != 0 && sampleHeader.reserved != 0xAD)
					madeWith.reset(verOldModPlug | verNewModPlug | verOpenMPT);

				if(lastSampleReserved == -1)
					lastSampleReserved = sampleHeader.reserved;
				else if(lastSampleReserved != sampleHeader.reserved)
					madeWith.reset(verPlayerPRO);
				if(sampleHeader.pan != 128)
					madeWith.reset(verPlayerPRO);
				if((sampleHeader.finetune & 0x0F) && sampleHeader.finetune != 127)
					madeWith.reset(verPlayerPRO);

				if(sample < sampleSlots.size())
				{
					SAMPLEINDEX mptSample = sampleSlots[sample];

					sampleHeader.ConvertToMPT(Samples[mptSample]);
					instrHeader.instrument.ApplyAutoVibratoToMPT(Samples[mptSample]);

					m_szNames[mptSample] = mpt::String::ReadBuf(mpt::String::spacePadded, sampleHeader.name);
					if(madeWith[verFT2Generic | verFT2Clone] && madeWith[verNewModPlug | verPlayerPRO] && !madeWith[verConfirmed]
						&& (sampleHeader.reserved > 22 || std::find_if(std::begin(sampleHeader.name) + sampleHeader.reserved, std::end(sampleHeader.name), [](char c) { return c != ' '; }) != std::end(sampleHeader.name)))
					{
						// FT2 stores the sample name length here (it just copies the entire Pascal string, but that string might have ended with spaces even before space-padding it in the file, so we cannot do an exact length comparison)
						madeWith.reset(verFT2Generic);
						madeWith.set(verFT2Clone | verConfirmed);
					}

					if((sampleHeader.flags & 3) == 3 && madeWith[verNewModPlug])
						madeWith.set(verModPlugBidiFlag);
				}
				if(sampleFlags.back().GetEncoding() == SampleIO::ADPCM)
					anyADPCM = true;
			}

			// Read samples
			if(fileHeader.version >= 0x0104)
			{
				for(SAMPLEINDEX sample = 0; sample < instrHeader.numSamples; sample++)
				{
					// Sample 15 in dirtysex.xm by J/M/T/M is a 16-bit sample with an odd size of 0x18B according to the header, while the real sample size would be 0x18A.
					// Always read as many bytes as specified in the header, even if the sample reader would probably read less bytes.
					FileReader sampleChunk = file.ReadChunk(sampleFlags[sample].GetEncoding() != SampleIO::ADPCM ? sampleSize[sample] : (16 + (sampleSize[sample] + 1) / 2));
					if(sample < sampleSlots.size() && (loadFlags & loadSampleData))
					{
						if(!ReadSampleData(Samples[sampleSlots[sample]], sampleFlags[sample], sampleChunk, isOXM))
						{
							unsupportedSamples = true;
						}
					}
				}
			}
		}
	}

	if(sampleReserved == 0 && madeWith[verNewModPlug] && memchr(fileHeader.songName, '\0', sizeof(fileHeader.songName)) != nullptr)
	{
		// Null-terminated song name: Quite possibly MPT. (could really be an MPT-made file resaved in FT2, though)
		madeWith.set(verConfirmed);
	}

	if(fileHeader.version < 0x0104)
	{
		// Load Patterns and Samples (Version 1.02 and 1.03)
		if(loadFlags & (loadPatternData | loadSampleData))
		{
			ReadXMPatterns(file, fileHeader, *this);
		}

		if(loadFlags & loadSampleData)
		{
			for(SAMPLEINDEX sample = 1; sample <= GetNumSamples(); sample++)
			{
				sampleFlags[sample - 1].ReadSample(Samples[sample], file);
			}
		}
	}

	if(unsupportedSamples)
	{
		AddToLog(LogWarning, U_("Some compressed samples could not be loaded because they use an unsupported codec."));
	}

	// Read song comments: "text"
	if(file.ReadMagic("text"))
	{
		m_songMessage.Read(file, file.ReadUint32LE(), SongMessage::leCR);
		madeWith.set(verConfirmed);
		madeWith.reset(verPlayerPRO);
	}
	
	// Read midi config: "MIDI"
	bool hasMidiConfig = false;
	if(file.ReadMagic("MIDI"))
	{
		file.ReadStructPartial<MIDIMacroConfigData>(m_MidiCfg, file.ReadUint32LE());
		m_MidiCfg.Sanitize();
		hasMidiConfig = true;
		madeWith.set(verConfirmed);
		madeWith.reset(verPlayerPRO);
	}

	// Read pattern names: "PNAM"
	if(file.ReadMagic("PNAM"))
	{
		const PATTERNINDEX namedPats = std::min(static_cast<PATTERNINDEX>(file.ReadUint32LE() / MAX_PATTERNNAME), Patterns.Size());
		
		for(PATTERNINDEX pat = 0; pat < namedPats; pat++)
		{
			char patName[MAX_PATTERNNAME];
			file.ReadString<mpt::String::maybeNullTerminated>(patName, MAX_PATTERNNAME);
			Patterns[pat].SetName(patName);
		}
		madeWith.set(verConfirmed);
		madeWith.reset(verPlayerPRO);
	}

	// Read channel names: "CNAM"
	if(file.ReadMagic("CNAM"))
	{
		const CHANNELINDEX namedChans = std::min(static_cast<CHANNELINDEX>(file.ReadUint32LE() / MAX_CHANNELNAME), GetNumChannels());
		for(CHANNELINDEX chn = 0; chn < namedChans; chn++)
		{
			file.ReadString<mpt::String::maybeNullTerminated>(ChnSettings[chn].szName, MAX_CHANNELNAME);
		}
		madeWith.set(verConfirmed);
		madeWith.reset(verPlayerPRO);
	}

	// Read mix plugins information
	if(file.CanRead(8))
	{
		FileReader::pos_type oldPos = file.GetPosition();
		LoadMixPlugins(file);
		if(file.GetPosition() != oldPos)
		{
			madeWith.set(verConfirmed);
			madeWith.reset(verPlayerPRO);
		}
	}

	if(madeWith[verConfirmed])
	{
		if(madeWith[verModPlugBidiFlag])
		{
			m_dwLastSavedWithVersion = MPT_V("1.11");
			madeWithTracker = UL_("ModPlug Tracker 1.0 - 1.11");
		} else if(madeWith[verNewModPlug] && !madeWith[verPlayerPRO])
		{
			m_dwLastSavedWithVersion = MPT_V("1.16");
			madeWithTracker = UL_("ModPlug Tracker 1.0 - 1.16");
		} else if(madeWith[verNewModPlug] && madeWith[verPlayerPRO])
		{
			m_dwLastSavedWithVersion = MPT_V("1.16");
			madeWithTracker = UL_("ModPlug Tracker 1.0 - 1.16 / PlayerPRO");
		} else if(!madeWith[verNewModPlug] && madeWith[verPlayerPRO])
		{
			madeWithTracker = UL_("PlayerPRO");
		}
	}

	if(!memcmp(fileHeader.trackerName, "OpenMPT ", 8))
	{
		// Hey, I know this tracker!
		std::string mptVersion(fileHeader.trackerName + 8, 12);
		m_dwLastSavedWithVersion = Version::Parse(mpt::ToUnicode(mpt::Charset::ASCII, mptVersion));
		madeWith = verOpenMPT | verConfirmed;

		if(m_dwLastSavedWithVersion < MPT_V("1.22.07.19"))
			m_nMixLevels = MixLevels::Compatible;
		else
			m_nMixLevels = MixLevels::CompatibleFT2;
	}

	if(m_dwLastSavedWithVersion && !madeWith[verOpenMPT])
	{
		m_nMixLevels = MixLevels::Original;
		m_playBehaviour.reset();
	}

	if(madeWith[verFT2Generic])
	{
		m_nMixLevels = MixLevels::CompatibleFT2;

		if(!hasMidiConfig)
		{
			// FT2 allows typing in arbitrary unsupported effect letters such as Zxx.
			// Prevent these commands from being interpreted as filter commands by erasing the default MIDI Config.
			m_MidiCfg.ClearZxxMacros();
		}

		if(fileHeader.version >= 0x0104	// Old versions of FT2 didn't have (smooth) ramping. Disable it for those versions where we can be sure that there should be no ramping.
#ifdef MODPLUG_TRACKER
			&& TrackerSettings::Instance().autoApplySmoothFT2Ramping
#endif // MODPLUG_TRACKER
			)
		{
			// apply FT2-style super-soft volume ramping
			m_playBehaviour.set(kFT2VolumeRamping);
		}
	}

	if(madeWithTracker.empty())
	{
		if(madeWith[verDigiTrakker] && sampleReserved == 0 && (lastInstrType ? lastInstrType : -1) == -1)
		{
			madeWithTracker = UL_("DigiTrakker");
		} else if(madeWith[verFT2Generic])
		{
			madeWithTracker = UL_("FastTracker 2 or compatible");
		} else
		{
			madeWithTracker = UL_("Unknown");
		}
	}

	bool isOpenMPTMade = false; // specific for OpenMPT 1.17+
	if(GetNumInstruments())
	{
		isOpenMPTMade = LoadExtendedInstrumentProperties(file);
	}

	LoadExtendedSongProperties(file, true, &isOpenMPTMade);

	if(isOpenMPTMade && m_dwLastSavedWithVersion < MPT_V("1.17"))
	{
		// Up to OpenMPT 1.17.02.45 (r165), it was possible that the "last saved with" field was 0
		// when saving a file in OpenMPT for the first time.
		m_dwLastSavedWithVersion = MPT_V("1.17");
	}

	if(m_dwLastSavedWithVersion >= MPT_V("1.17"))
	{
		madeWithTracker = UL_("OpenMPT ") + m_dwLastSavedWithVersion.ToUString();
	}

	// We no longer allow any --- or +++ items in the order list now.
	if(m_dwLastSavedWithVersion && m_dwLastSavedWithVersion < MPT_V("1.22.02.02"))
	{
		if(!Patterns.IsValidPat(0xFE))
			Order().RemovePattern(0xFE);
		if(!Patterns.IsValidPat(0xFF))
			Order().Replace(0xFF, PATTERNINDEX_INVALID);
	}

	m_modFormat.formatName = MPT_UFORMAT("FastTracker 2 v{}.{}")(fileHeader.version >> 8, mpt::ufmt::hex0<2>(fileHeader.version & 0xFF));
	m_modFormat.madeWithTracker = std::move(madeWithTracker);
	m_modFormat.charset = (m_dwLastSavedWithVersion || isMadTracker) ? mpt::Charset::Windows1252 : mpt::Charset::CP437;
	if(isOXM)
	{
		m_modFormat.originalFormatName = std::move(m_modFormat.formatName);
		m_modFormat.formatName = UL_("OggMod FastTracker 2");
		m_modFormat.type = UL_("oxm");
		m_modFormat.originalType = UL_("xm");
	} else
	{
		m_modFormat.type = UL_("xm");
	}

	if(anyADPCM)
		m_modFormat.madeWithTracker += UL_(" (ADPCM packed)");

	return true;
}


#ifndef MODPLUG_NO_FILESAVE


#if MPT_GCC_AT_LEAST(13, 0, 0) && MPT_GCC_BEFORE(15, 1, 0)
// work-around massively confused GCC 13/14 optimizer:
// /usr/include/c++/13/bits/stl_algobase.h:437:30: warning: 'void* __builtin_memcpy(void*, const void*, long unsigned int)' writing between 3 and 9223372036854775806 bytes into a region of size 0 overflows the destination [-Wstringop-overflow=]
template <typename Tcont2, typename Tcont1>
static MPT_NOINLINE Tcont1 & gcc_append(Tcont1 & cont1, const Tcont2 & cont2) {
	cont1.insert(cont1.end(), cont2.begin(), cont2.end());
	return cont1;
}
#endif


bool CSoundFile::SaveXM(std::ostream &f, bool compatibilityExport)
{

	bool addChannel = false; // avoid odd channel count for FT2 compatibility

	XMFileHeader fileHeader;
	MemsetZero(fileHeader);

	memcpy(fileHeader.signature, "Extended Module: ", 17);
	mpt::String::WriteBuf(mpt::String::spacePadded, fileHeader.songName) = m_songName;
	fileHeader.eof = 0x1A;
	const std::string openMptTrackerName = mpt::ToCharset(GetCharsetFile(), Version::Current().GetOpenMPTVersionString());
	mpt::String::WriteBuf(mpt::String::spacePadded, fileHeader.trackerName) = openMptTrackerName;

	// Writing song header
	fileHeader.version = 0x0104;					// XM Format v1.04
	fileHeader.size = sizeof(XMFileHeader) - 60;	// minus everything before this field
	fileHeader.restartPos = Order().GetRestartPos();

	fileHeader.channels = GetNumChannels();
	if((GetNumChannels() % 2u) && GetNumChannels() < 32)
	{
		// Avoid odd channel count for FT2 compatibility
		fileHeader.channels++;
		addChannel = true;
	} else if(compatibilityExport && fileHeader.channels > 32)
	{
		fileHeader.channels = 32;
	}

	// Find out number of orders and patterns used.
	// +++ and --- patterns are not taken into consideration as FastTracker does not support them.
	
	const ORDERINDEX trimmedLength = Order().GetLengthTailTrimmed();
	std::vector<uint8> orderList(trimmedLength);
	const ORDERINDEX orderLimit = compatibilityExport ? 256 : uint16_max;
	ORDERINDEX numOrders = 0;
	PATTERNINDEX numPatterns = Patterns.GetNumPatterns();
	bool changeOrderList = false;
	for(ORDERINDEX ord = 0; ord < trimmedLength; ord++)
	{
		PATTERNINDEX pat = Order()[ord];
		if(pat == PATTERNINDEX_SKIP || pat == PATTERNINDEX_INVALID || pat > uint8_max)
		{
			changeOrderList = true;
		} else if(numOrders < orderLimit)
		{
			orderList[numOrders++] = static_cast<uint8>(pat);
			if(pat >= numPatterns)
				numPatterns = pat + 1;
		}
	}
	if(changeOrderList)
	{
		AddToLog(LogWarning, U_("Skip and stop order list items (+++ and ---) are not saved in XM files."));
	}
	orderList.resize(compatibilityExport ? 256 : numOrders);

	fileHeader.orders = numOrders;
	fileHeader.patterns = numPatterns;
	fileHeader.size += static_cast<uint32>(orderList.size());

	uint16 writeInstruments;
	if(m_nInstruments > 0)
		fileHeader.instruments = writeInstruments = m_nInstruments;
	else
		fileHeader.instruments = writeInstruments = m_nSamples;

	if(m_SongFlags[SONG_LINEARSLIDES]) fileHeader.flags |= XMFileHeader::linearSlides;
	if(m_SongFlags[SONG_EXFILTERRANGE] && !compatibilityExport) fileHeader.flags |= XMFileHeader::extendedFilterRange;
	fileHeader.flags = fileHeader.flags;

	// Fasttracker 2 will happily accept any tempo faster than 255 BPM. XMPlay does also support this, great!
	fileHeader.tempo = mpt::saturate_cast<uint16>(Order().GetDefaultTempo().GetInt());
	fileHeader.speed = static_cast<uint16>(Clamp(Order().GetDefaultSpeed(), 1u, 31u));

	mpt::IO::Write(f, fileHeader);

	// Write processed order list
	mpt::IO::Write(f, orderList);

	// Writing patterns

#define ASSERT_CAN_WRITE(x) \
	if(len > s.size() - x) /*Buffer running out? Make it larger.*/ \
		s.resize(s.size() + 10 * 1024, 0);
	std::vector<uint8> s(64 * 64 * 5, 0);

	for(PATTERNINDEX pat = 0; pat < numPatterns; pat++)
	{
		uint8 patHead[9] = { 0 };
		patHead[0] = 9;

		if(!Patterns.IsValidPat(pat))
		{
			// There's nothing to write... chicken out.
			patHead[5] = 64;
			mpt::IO::Write(f, patHead);
			continue;
		}

		const uint16 numRows = mpt::saturate_cast<uint16>(Patterns[pat].GetNumRows());
		patHead[5] = static_cast<uint8>(numRows & 0xFF);
		patHead[6] = static_cast<uint8>(numRows >> 8);

		auto p = Patterns[pat].cbegin();
		size_t len = 0;
		// Empty patterns are always loaded as 64-row patterns in FT2, regardless of their real size...
		bool emptyPattern = true;

		for(size_t j = GetNumChannels() * numRows; j > 0; j--, p++)
		{
			// Don't write more than 32 channels
			if(compatibilityExport && GetNumChannels() - ((j - 1) % GetNumChannels()) > 32) continue;

			uint8 note = p->note, command = 0, param = 0;
			ModSaveCommand(*p, command, param, true, compatibilityExport);

			if(note >= NOTE_MIN_SPECIAL)
				note = 97;
			else if(note < NOTE_MIN + 12 || note >= NOTE_MIN + 12 + 96)
				note = 0;
			else
				note -= 12;
			uint8 vol = 0;
			if (p->volcmd != VOLCMD_NONE)
			{
				switch(p->volcmd)
				{
				case VOLCMD_VOLUME:			vol = 0x10 + p->vol; break;
				case VOLCMD_VOLSLIDEDOWN:	vol = 0x60 + (p->vol & 0x0F); break;
				case VOLCMD_VOLSLIDEUP:		vol = 0x70 + (p->vol & 0x0F); break;
				case VOLCMD_FINEVOLDOWN:	vol = 0x80 + (p->vol & 0x0F); break;
				case VOLCMD_FINEVOLUP:		vol = 0x90 + (p->vol & 0x0F); break;
				case VOLCMD_VIBRATOSPEED:	vol = 0xA0 + (p->vol & 0x0F); break;
				case VOLCMD_VIBRATODEPTH:	vol = 0xB0 + (p->vol & 0x0F); break;
				case VOLCMD_PANNING:		vol = 0xC0 + (p->vol / 4); if (vol > 0xCF) vol = 0xCF; break;
				case VOLCMD_PANSLIDELEFT:	vol = 0xD0 + (p->vol & 0x0F); break;
				case VOLCMD_PANSLIDERIGHT:	vol = 0xE0 + (p->vol & 0x0F); break;
				case VOLCMD_TONEPORTAMENTO:	vol = 0xF0 + (p->vol & 0x0F); break;
				default: break;
				}
				// Those values are ignored in FT2. Don't save them, also to avoid possible problems with other trackers (or MPT itself)
				if(compatibilityExport && p->vol == 0)
				{
					switch(p->volcmd)
					{
					case VOLCMD_VOLUME:
					case VOLCMD_PANNING:
					case VOLCMD_VIBRATODEPTH:
					case VOLCMD_TONEPORTAMENTO:
					case VOLCMD_PANSLIDELEFT:	// Doesn't have memory, but does weird things with zero param.
						break;
					default:
						// no memory here.
						vol = 0;
					}
				}
			}

			// no need to fix non-empty patterns
			if(!p->IsEmpty())
				emptyPattern = false;

			// Completely empty patterns are loaded as empty 64-row patterns in FT2, regardless of their original size.
			// We have to avoid this, so we add a "break to row 0" command in the last row.
			if(j == 1 && emptyPattern && numRows != 64)
			{
				command = 0x0D;
				param = 0;
			}

			if ((note) && (p->instr) && (vol > 0x0F) && (command) && (param))
			{
				s[len++] = note;
				s[len++] = p->instr;
				s[len++] = vol;
				s[len++] = command;
				s[len++] = param;
			} else
			{
				uint8 b = 0x80;
				if (note) b |= 0x01;
				if (p->instr) b |= 0x02;
				if (vol >= 0x10) b |= 0x04;
				if (command) b |= 0x08;
				if (param) b |= 0x10;
				s[len++] = b;
				if (b & 1) s[len++] = note;
				if (b & 2) s[len++] = p->instr;
				if (b & 4) s[len++] = vol;
				if (b & 8) s[len++] = command;
				if (b & 16) s[len++] = param;
			}

			if(addChannel && (j % GetNumChannels() == 1 || GetNumChannels() == 1))
			{
				ASSERT_CAN_WRITE(1);
				s[len++] = 0x80;
			}

			ASSERT_CAN_WRITE(5);
		}

		if(emptyPattern && numRows == 64)
		{
			// Be smart when saving empty patterns!
			len = 0;
		}

		// Reaching the limits of file format?
		if(len > uint16_max)
		{
			AddToLog(LogWarning, MPT_UFORMAT("Warning: File format limit was reached. Some pattern data may not get written to file. (pattern {})")(pat));
			len = uint16_max;
		}

		patHead[7] = static_cast<uint8>(len & 0xFF);
		patHead[8] = static_cast<uint8>(len >> 8);
		mpt::IO::Write(f, patHead);
		if(len) mpt::IO::WriteRaw(f, s.data(), len);
	}

#undef ASSERT_CAN_WRITE

	// Check which samples are referenced by which instruments (for assigning unreferenced samples to instruments)
	std::vector<bool> sampleAssigned(GetNumSamples() + 1, false);
	for(INSTRUMENTINDEX ins = 1; ins <= GetNumInstruments(); ins++)
	{
		if(Instruments[ins] != nullptr)
		{
			Instruments[ins]->GetSamples(sampleAssigned);
		}
	}

	// Writing instruments
	for(INSTRUMENTINDEX ins = 1; ins <= writeInstruments; ins++)
	{
		XMInstrumentHeader insHeader;
		std::vector<SAMPLEINDEX> samples;

		if(GetNumInstruments())
		{
			if(Instruments[ins] != nullptr)
			{
				// Convert instrument
				auto sampleList = insHeader.ConvertToXM(*Instruments[ins], compatibilityExport);
				samples = std::move(sampleList.samples);
				if(sampleList.tooManySamples)
					AddToLog(LogInformation, MPT_UFORMAT("Instrument {} references too many samples, only the first {} will be exported.")(ins, samples.size()));

				if(samples.size() > 0 && samples[0] <= GetNumSamples())
				{
					// Copy over auto-vibrato settings of first sample
					insHeader.instrument.ApplyAutoVibratoToXM(Samples[samples[0]], GetType());
				}

				std::vector<SAMPLEINDEX> additionalSamples;

				// Try to save "instrument-less" samples as well by adding those after the "normal" samples of our sample.
				// We look for unassigned samples directly after the samples assigned to our current instrument, so if
				// e.g. sample 1 is assigned to instrument 1 and samples 2 to 10 aren't assigned to any instrument,
				// we will assign those to sample 1. Any samples before the first referenced sample are going to be lost,
				// but hey, I wrote this mostly for preserving instrument texts in existing modules, where we shouldn't encounter this situation...
				for(auto smp : samples)
				{
					while(++smp <= GetNumSamples()
						&& !sampleAssigned[smp]
						&& insHeader.numSamples < (compatibilityExport ? 16 : 32))
					{
						sampleAssigned[smp] = true;			// Don't want to add this sample again.
						additionalSamples.push_back(smp);
						insHeader.numSamples++;
					}
				}

#if MPT_GCC_AT_LEAST(13, 0, 0) && MPT_GCC_BEFORE(15, 1, 0)
				gcc_append(samples, additionalSamples);
#else
				mpt::append(samples, additionalSamples);
#endif
			} else
			{
				MemsetZero(insHeader);
			}
		} else
		{
			// Convert samples to instruments
			MemsetZero(insHeader);
			insHeader.numSamples = 1;
			insHeader.instrument.ApplyAutoVibratoToXM(Samples[ins], GetType());
			samples.push_back(ins);
		}

		insHeader.Finalise();
		size_t insHeaderSize = insHeader.size;
		mpt::IO::WritePartial(f, insHeader, insHeaderSize);

		std::vector<SampleIO> sampleFlags(samples.size());

		// Write Sample Headers
		for(SAMPLEINDEX smp = 0; smp < samples.size(); smp++)
		{
			XMSample xmSample;
			if(samples[smp] <= GetNumSamples())
			{
				xmSample.ConvertToXM(Samples[samples[smp]], GetType(), compatibilityExport);
			} else
			{
				MemsetZero(xmSample);
			}
			sampleFlags[smp] = xmSample.GetSampleFormat();

			mpt::String::WriteBuf(mpt::String::spacePadded, xmSample.name) = m_szNames[samples[smp]];

			mpt::IO::Write(f, xmSample);
		}

		// Write Sample Data
		for(SAMPLEINDEX smp = 0; smp < samples.size(); smp++)
		{
			if(samples[smp] <= GetNumSamples())
			{
				sampleFlags[smp].WriteSample(f, Samples[samples[smp]]);
			}
		}
	}

	if(!compatibilityExport)
	{
		// Writing song comments
		if(!m_songMessage.empty())
		{
			uint32 size = mpt::saturate_cast<uint32>(m_songMessage.length());
			mpt::IO::WriteRaw(f, "text", 4);
			mpt::IO::WriteIntLE<uint32>(f, size);
			mpt::IO::WriteRaw(f, m_songMessage.c_str(), size);
		}
		// Writing midi cfg
		if(!m_MidiCfg.IsMacroDefaultSetupUsed())
		{
			mpt::IO::WriteRaw(f, "MIDI", 4);
			mpt::IO::WriteIntLE<uint32>(f, sizeof(MIDIMacroConfigData));
			mpt::IO::Write(f, static_cast<MIDIMacroConfigData &>(m_MidiCfg));
		}
		// Writing Pattern Names
		const PATTERNINDEX numNamedPats = Patterns.GetNumNamedPatterns();
		if(numNamedPats > 0)
		{
			mpt::IO::WriteRaw(f, "PNAM", 4);
			mpt::IO::WriteIntLE<uint32>(f, numNamedPats * MAX_PATTERNNAME);
			for(PATTERNINDEX pat = 0; pat < numNamedPats; pat++)
			{
				char name[MAX_PATTERNNAME];
				mpt::String::WriteBuf(mpt::String::maybeNullTerminated, name) = Patterns[pat].GetName();
				mpt::IO::Write(f, name);
			}
		}
		// Writing Channel Names
		{
			CHANNELINDEX numNamedChannels = 0;
			for(CHANNELINDEX chn = 0; chn < GetNumChannels(); chn++)
			{
				if (ChnSettings[chn].szName[0]) numNamedChannels = chn + 1;
			}
			// Do it!
			if(numNamedChannels)
			{
				mpt::IO::WriteRaw(f, "CNAM", 4);
				mpt::IO::WriteIntLE<uint32>(f, numNamedChannels * MAX_CHANNELNAME);
				for(CHANNELINDEX chn = 0; chn < numNamedChannels; chn++)
				{
					char name[MAX_CHANNELNAME];
					mpt::String::WriteBuf(mpt::String::maybeNullTerminated, name) = ChnSettings[chn].szName;
					mpt::IO::Write(f, name);
				}
			}
		}

		//Save hacked-on extra info
		SaveMixPlugins(&f);
		if(GetNumInstruments())
		{
			SaveExtendedInstrumentProperties(0, MOD_TYPE_XM, f);
		}
		SaveExtendedSongProperties(f);
	}

	return true;
}

#endif // MODPLUG_NO_FILESAVE


OPENMPT_NAMESPACE_END