1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404
|
/*
* Copyright (c) 2006 Paolo Abeni (Italy)
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote
* products derived from this software without specific prior written
* permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* USB sniffing API implementation for Linux platform
* By Paolo Abeni <paolo.abeni@email.it>
* Modifications: Kris Katterjohn <katterjohn@gmail.com>
*
*/
#ifdef HAVE_CONFIG_H
#include <config.h>
#endif
#include "pcap-int.h"
#include "pcap-usb-linux.h"
#include "pcap/usb.h"
#include "extract.h"
#ifdef NEED_STRERROR_H
#include "strerror.h"
#endif
#include <errno.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <limits.h>
#include <string.h>
#include <dirent.h>
#include <byteswap.h>
#include <netinet/in.h>
#include <sys/ioctl.h>
#include <sys/mman.h>
#include <sys/utsname.h>
#ifdef HAVE_LINUX_USBDEVICE_FS_H
/*
* We might need <linux/compiler.h> to define __user for
* <linux/usbdevice_fs.h>.
*/
#ifdef HAVE_LINUX_COMPILER_H
#include <linux/compiler.h>
#endif /* HAVE_LINUX_COMPILER_H */
#include <linux/usbdevice_fs.h>
#endif /* HAVE_LINUX_USBDEVICE_FS_H */
#define USB_IFACE "usbmon"
#define USB_TEXT_DIR_OLD "/sys/kernel/debug/usbmon"
#define USB_TEXT_DIR "/sys/kernel/debug/usb/usbmon"
#define SYS_USB_BUS_DIR "/sys/bus/usb/devices"
#define PROC_USB_BUS_DIR "/dev/bus/usb"
#define USB_LINE_LEN 4096
#if __BYTE_ORDER == __LITTLE_ENDIAN
#define htols(s) s
#define htoll(l) l
#define htol64(ll) ll
#else
#define htols(s) bswap_16(s)
#define htoll(l) bswap_32(l)
#define htol64(ll) bswap_64(ll)
#endif
struct mon_bin_stats {
uint32_t queued;
uint32_t dropped;
};
struct mon_bin_get {
pcap_usb_header *hdr;
void *data;
size_t data_len; /* Length of data (can be zero) */
};
struct mon_bin_mfetch {
int32_t *offvec; /* Vector of events fetched */
int32_t nfetch; /* Number of events to fetch (out: fetched) */
int32_t nflush; /* Number of events to flush */
};
#define MON_IOC_MAGIC 0x92
#define MON_IOCQ_URB_LEN _IO(MON_IOC_MAGIC, 1)
#define MON_IOCX_URB _IOWR(MON_IOC_MAGIC, 2, struct mon_bin_hdr)
#define MON_IOCG_STATS _IOR(MON_IOC_MAGIC, 3, struct mon_bin_stats)
#define MON_IOCT_RING_SIZE _IO(MON_IOC_MAGIC, 4)
#define MON_IOCQ_RING_SIZE _IO(MON_IOC_MAGIC, 5)
#define MON_IOCX_GET _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get)
#define MON_IOCX_MFETCH _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch)
#define MON_IOCH_MFLUSH _IO(MON_IOC_MAGIC, 8)
#define MON_BIN_SETUP 0x1 /* setup hdr is present*/
#define MON_BIN_SETUP_ZERO 0x2 /* setup buffer is not available */
#define MON_BIN_DATA_ZERO 0x4 /* data buffer is not available */
#define MON_BIN_ERROR 0x8
/*
* Private data for capturing on Linux USB.
*/
struct pcap_usb_linux {
u_char *mmapbuf; /* memory-mapped region pointer */
size_t mmapbuflen; /* size of region */
int bus_index;
u_int packets_read;
};
/* forward declaration */
static int usb_activate(pcap_t *);
static int usb_stats_linux(pcap_t *, struct pcap_stat *);
static int usb_stats_linux_bin(pcap_t *, struct pcap_stat *);
static int usb_read_linux(pcap_t *, int , pcap_handler , u_char *);
static int usb_read_linux_bin(pcap_t *, int , pcap_handler , u_char *);
static int usb_read_linux_mmap(pcap_t *, int , pcap_handler , u_char *);
static int usb_inject_linux(pcap_t *, const void *, int);
static int usb_setdirection_linux(pcap_t *, pcap_direction_t);
static void usb_cleanup_linux_mmap(pcap_t *);
static int
have_binary_usbmon(void)
{
struct utsname utsname;
char *version_component, *endp;
long major, minor, subminor;
if (uname(&utsname) == 0) {
/*
* 2.6.21 is the first release with the binary-mode
* USB monitoring.
*/
version_component = utsname.release;
major = strtol(version_component, &endp, 10);
if (endp != version_component && *endp == '.') {
/*
* OK, that was a valid major version.
* Is it 3 or greater? If so, we have binary
* mode support.
*/
if (major >= 3)
return 1;
/*
* Is it 1 or less? If so, we don't have binary
* mode support. (In fact, we don't have any
* USB monitoring....)
*/
if (major <= 1)
return 0;
}
/*
* OK, this is a 2.x kernel.
* What's the minor version?
*/
version_component = endp + 1;
minor = strtol(version_component, &endp, 10);
if (endp != version_component &&
(*endp == '.' || *endp == '\0')) {
/*
* OK, that was a valid minor version.
* Is is 2.6 or later? (There shouldn't be a
* "later", as 2.6.x went to 3.x, but we'll
* check anyway.)
*/
if (minor < 6) {
/*
* No, so no binary support (did 2.4 have
* any USB monitoring at all?)
*/
return 0;
}
/*
* OK, this is a 2.6.x kernel.
* What's the subminor version?
*/
version_component = endp + 1;
subminor = strtol(version_component, &endp, 10);
if (endp != version_component &&
(*endp == '.' || *endp == '\0')) {
/*
* OK, that was a valid subminor version.
* Is it 21 or greater?
*/
if (subminor >= 21) {
/*
* Yes - we have binary mode
* support.
*/
return 1;
}
}
}
}
/*
* Either uname() failed, in which case we just say "no binary
* mode support", or we don't have binary mode support.
*/
return 0;
}
/* facility to add an USB device to the device list*/
static int
usb_dev_add(pcap_if_list_t *devlistp, int n, char *err_str)
{
char dev_name[10];
char dev_descr[30];
snprintf(dev_name, 10, USB_IFACE"%d", n);
/*
* XXX - is there any notion of "up" and "running"?
*/
if (n == 0) {
/*
* As this refers to all buses, there's no notion of
* "connected" vs. "disconnected", as that's a property
* that would apply to a particular USB interface.
*/
if (add_dev(devlistp, dev_name,
PCAP_IF_CONNECTION_STATUS_NOT_APPLICABLE,
"Raw USB traffic, all USB buses", err_str) == NULL)
return -1;
} else {
/*
* XXX - is there a way to determine whether anything's
* plugged into this bus interface or not, and set
* PCAP_IF_CONNECTION_STATUS_CONNECTED or
* PCAP_IF_CONNECTION_STATUS_DISCONNECTED?
*/
snprintf(dev_descr, 30, "Raw USB traffic, bus number %d", n);
if (add_dev(devlistp, dev_name, 0, dev_descr, err_str) == NULL)
return -1;
}
return 0;
}
int
usb_findalldevs(pcap_if_list_t *devlistp, char *err_str)
{
char usb_mon_dir[PATH_MAX];
char *usb_mon_prefix;
size_t usb_mon_prefix_len;
struct dirent* data;
int ret = 0;
DIR* dir;
int n;
char* name;
size_t len;
if (have_binary_usbmon()) {
/*
* We have binary-mode support.
* What do the device names look like?
* Split LINUX_USB_MON_DEV into a directory that we'll
* scan and a file name prefix that we'll check for.
*/
pcap_strlcpy(usb_mon_dir, LINUX_USB_MON_DEV, sizeof usb_mon_dir);
usb_mon_prefix = strrchr(usb_mon_dir, '/');
if (usb_mon_prefix == NULL) {
/*
* This "shouldn't happen". Just give up if it
* does.
*/
return 0;
}
*usb_mon_prefix++ = '\0';
usb_mon_prefix_len = strlen(usb_mon_prefix);
/*
* Open the directory and scan it.
*/
dir = opendir(usb_mon_dir);
if (dir != NULL) {
while ((ret == 0) && ((data = readdir(dir)) != 0)) {
name = data->d_name;
/*
* Is this a usbmon device?
*/
if (strncmp(name, usb_mon_prefix, usb_mon_prefix_len) != 0)
continue; /* no */
/*
* What's the device number?
*/
if (sscanf(&name[usb_mon_prefix_len], "%d", &n) == 0)
continue; /* failed */
ret = usb_dev_add(devlistp, n, err_str);
}
closedir(dir);
}
return 0;
} else {
/*
* We have only text mode support.
* We don't look for the text devices because we can't
* look for them without root privileges, and we don't
* want to require root privileges to enumerate devices
* (we want to let the user to try a device and get
* an error, rather than seeing no devices and asking
* "why am I not seeing devices" and forcing a long
* process of poking to figure out whether it's "no
* privileges" or "your kernel is too old" or "the
* usbmon module isn't loaded" or...).
*
* Instead, we look to see what buses we have.
* If the kernel is so old that it doesn't have
* binary-mode support, it's also so old that
* it doesn't have a "scan all buses" device.
*
* First, try scanning sysfs USB bus directory.
*/
dir = opendir(SYS_USB_BUS_DIR);
if (dir != NULL) {
while ((ret == 0) && ((data = readdir(dir)) != 0)) {
name = data->d_name;
if (strncmp(name, "usb", 3) != 0)
continue;
if (sscanf(&name[3], "%d", &n) == 0)
continue;
ret = usb_dev_add(devlistp, n, err_str);
}
closedir(dir);
return 0;
}
/* That didn't work; try scanning procfs USB bus directory. */
dir = opendir(PROC_USB_BUS_DIR);
if (dir != NULL) {
while ((ret == 0) && ((data = readdir(dir)) != 0)) {
name = data->d_name;
len = strlen(name);
/* if this file name does not end with a number it's not of our interest */
if ((len < 1) || !PCAP_ISDIGIT(name[--len]))
continue;
while (PCAP_ISDIGIT(name[--len]));
if (sscanf(&name[len+1], "%d", &n) != 1)
continue;
ret = usb_dev_add(devlistp, n, err_str);
}
closedir(dir);
return ret;
}
/* neither of them worked */
return 0;
}
}
/*
* Matches what's in mon_bin.c in the Linux kernel.
*/
#define MIN_RING_SIZE (8*1024)
#define MAX_RING_SIZE (1200*1024)
static int
usb_set_ring_size(pcap_t* handle, int header_size)
{
/*
* A packet from binary usbmon has:
*
* 1) a fixed-length header, of size header_size;
* 2) descriptors, for isochronous transfers;
* 3) the payload.
*
* The kernel buffer has a size, defaulting to 300KB, with a
* minimum of 8KB and a maximum of 1200KB. The size is set with
* the MON_IOCT_RING_SIZE ioctl; the size passed in is rounded up
* to a page size.
*
* No more than {buffer size}/5 bytes worth of payload is saved.
* Therefore, if we subtract the fixed-length size from the
* snapshot length, we have the biggest payload we want (we
* don't worry about the descriptors - if we have descriptors,
* we'll just discard the last bit of the payload to get it
* to fit). We multiply that result by 5 and set the buffer
* size to that value.
*/
int ring_size;
if (handle->snapshot < header_size)
handle->snapshot = header_size;
/* The maximum snapshot size is small enough that this won't overflow */
ring_size = (handle->snapshot - header_size) * 5;
/*
* Will this get an error?
* (There's no wqy to query the minimum or maximum, so we just
* copy the value from the kernel source. We don't round it
* up to a multiple of the page size.)
*/
if (ring_size > MAX_RING_SIZE) {
/*
* Yes. Lower the ring size to the maximum, and set the
* snapshot length to the value that would give us a
* maximum-size ring.
*/
ring_size = MAX_RING_SIZE;
handle->snapshot = header_size + (MAX_RING_SIZE/5);
} else if (ring_size < MIN_RING_SIZE) {
/*
* Yes. Raise the ring size to the minimum, but leave
* the snapshot length unchanged, so we show the
* callback no more data than specified by the
* snapshot length.
*/
ring_size = MIN_RING_SIZE;
}
if (ioctl(handle->fd, MON_IOCT_RING_SIZE, ring_size) == -1) {
pcap_fmt_errmsg_for_errno(handle->errbuf, PCAP_ERRBUF_SIZE,
errno, "Can't set ring size from fd %d", handle->fd);
return -1;
}
return ring_size;
}
static
int usb_mmap(pcap_t* handle)
{
struct pcap_usb_linux *handlep = handle->priv;
int len;
/*
* Attempt to set the ring size as appropriate for the snapshot
* length, reducing the snapshot length if that'd make the ring
* bigger than the kernel supports.
*/
len = usb_set_ring_size(handle, (int)sizeof(pcap_usb_header_mmapped));
if (len == -1) {
/* Failed. Fall back on non-memory-mapped access. */
return 0;
}
handlep->mmapbuflen = len;
handlep->mmapbuf = mmap(0, handlep->mmapbuflen, PROT_READ,
MAP_SHARED, handle->fd, 0);
if (handlep->mmapbuf == MAP_FAILED) {
/*
* Failed. We don't treat that as a fatal error, we
* just try to fall back on non-memory-mapped access.
*/
return 0;
}
return 1;
}
#ifdef HAVE_LINUX_USBDEVICE_FS_H
#define CTRL_TIMEOUT (5*1000) /* milliseconds */
#define USB_DIR_IN 0x80
#define USB_TYPE_STANDARD 0x00
#define USB_RECIP_DEVICE 0x00
#define USB_REQ_GET_DESCRIPTOR 6
#define USB_DT_DEVICE 1
#define USB_DT_CONFIG 2
#define USB_DEVICE_DESCRIPTOR_SIZE 18
#define USB_CONFIG_DESCRIPTOR_SIZE 9
/* probe the descriptors of the devices attached to the bus */
/* the descriptors will end up in the captured packet stream */
/* and be decoded by external apps like wireshark */
/* without these identifying probes packet data can't be fully decoded */
static void
probe_devices(int bus)
{
struct usbdevfs_ctrltransfer ctrl;
struct dirent* data;
int ret = 0;
char busdevpath[sizeof("/dev/bus/usb/000/") + NAME_MAX];
DIR* dir;
uint8_t descriptor[USB_DEVICE_DESCRIPTOR_SIZE];
uint8_t configdesc[USB_CONFIG_DESCRIPTOR_SIZE];
/* scan usb bus directories for device nodes */
snprintf(busdevpath, sizeof(busdevpath), "/dev/bus/usb/%03d", bus);
dir = opendir(busdevpath);
if (!dir)
return;
while ((ret >= 0) && ((data = readdir(dir)) != 0)) {
int fd;
char* name = data->d_name;
if (name[0] == '.')
continue;
snprintf(busdevpath, sizeof(busdevpath), "/dev/bus/usb/%03d/%s", bus, data->d_name);
fd = open(busdevpath, O_RDWR);
if (fd == -1)
continue;
/*
* Sigh. Different kernels have different member names
* for this structure.
*/
#ifdef HAVE_STRUCT_USBDEVFS_CTRLTRANSFER_BREQUESTTYPE
ctrl.bRequestType = USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE;
ctrl.bRequest = USB_REQ_GET_DESCRIPTOR;
ctrl.wValue = USB_DT_DEVICE << 8;
ctrl.wIndex = 0;
ctrl.wLength = sizeof(descriptor);
#else
ctrl.requesttype = USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE;
ctrl.request = USB_REQ_GET_DESCRIPTOR;
ctrl.value = USB_DT_DEVICE << 8;
ctrl.index = 0;
ctrl.length = sizeof(descriptor);
#endif
ctrl.data = descriptor;
ctrl.timeout = CTRL_TIMEOUT;
ret = ioctl(fd, USBDEVFS_CONTROL, &ctrl);
/* Request CONFIGURATION descriptor alone to know wTotalLength */
#ifdef HAVE_STRUCT_USBDEVFS_CTRLTRANSFER_BREQUESTTYPE
ctrl.wValue = USB_DT_CONFIG << 8;
ctrl.wLength = sizeof(configdesc);
#else
ctrl.value = USB_DT_CONFIG << 8;
ctrl.length = sizeof(configdesc);
#endif
ctrl.data = configdesc;
ret = ioctl(fd, USBDEVFS_CONTROL, &ctrl);
if (ret >= 0) {
uint16_t wtotallength;
wtotallength = EXTRACT_LE_U_2(&configdesc[2]);
#ifdef HAVE_STRUCT_USBDEVFS_CTRLTRANSFER_BREQUESTTYPE
ctrl.wLength = wtotallength;
#else
ctrl.length = wtotallength;
#endif
ctrl.data = malloc(wtotallength);
if (ctrl.data) {
ret = ioctl(fd, USBDEVFS_CONTROL, &ctrl);
free(ctrl.data);
}
}
close(fd);
}
closedir(dir);
}
#endif /* HAVE_LINUX_USBDEVICE_FS_H */
pcap_t *
usb_create(const char *device, char *ebuf, int *is_ours)
{
const char *cp;
char *cpend;
long devnum;
pcap_t *p;
/* Does this look like a USB monitoring device? */
cp = strrchr(device, '/');
if (cp == NULL)
cp = device;
/* Does it begin with USB_IFACE? */
if (strncmp(cp, USB_IFACE, sizeof USB_IFACE - 1) != 0) {
/* Nope, doesn't begin with USB_IFACE */
*is_ours = 0;
return NULL;
}
/* Yes - is USB_IFACE followed by a number? */
cp += sizeof USB_IFACE - 1;
devnum = strtol(cp, &cpend, 10);
if (cpend == cp || *cpend != '\0') {
/* Not followed by a number. */
*is_ours = 0;
return NULL;
}
if (devnum < 0) {
/* Followed by a non-valid number. */
*is_ours = 0;
return NULL;
}
/* OK, it's probably ours. */
*is_ours = 1;
p = PCAP_CREATE_COMMON(ebuf, struct pcap_usb_linux);
if (p == NULL)
return (NULL);
p->activate_op = usb_activate;
return (p);
}
static int
usb_activate(pcap_t* handle)
{
struct pcap_usb_linux *handlep = handle->priv;
char full_path[USB_LINE_LEN];
int ret;
/*
* Turn a negative snapshot value (invalid), a snapshot value of
* 0 (unspecified), or a value bigger than the normal maximum
* value, into the maximum allowed value.
*
* If some application really *needs* a bigger snapshot
* length, we should just increase MAXIMUM_SNAPLEN.
*/
if (handle->snapshot <= 0 || handle->snapshot > MAXIMUM_SNAPLEN)
handle->snapshot = MAXIMUM_SNAPLEN;
/* Initialize some components of the pcap structure. */
handle->bufsize = handle->snapshot;
handle->offset = 0;
handle->linktype = DLT_USB_LINUX;
handle->inject_op = usb_inject_linux;
handle->setfilter_op = install_bpf_program; /* no kernel filtering */
handle->setdirection_op = usb_setdirection_linux;
handle->set_datalink_op = NULL; /* can't change data link type */
handle->getnonblock_op = pcap_getnonblock_fd;
handle->setnonblock_op = pcap_setnonblock_fd;
/*get usb bus index from device name */
if (sscanf(handle->opt.device, USB_IFACE"%d", &handlep->bus_index) != 1)
{
snprintf(handle->errbuf, PCAP_ERRBUF_SIZE,
"Can't get USB bus index from %s", handle->opt.device);
return PCAP_ERROR;
}
if (have_binary_usbmon())
{
/*
* We have binary-mode support.
* Try to open the binary interface.
*/
snprintf(full_path, USB_LINE_LEN, LINUX_USB_MON_DEV"%d", handlep->bus_index);
handle->fd = open(full_path, O_RDONLY, 0);
if (handle->fd < 0)
{
/*
* The attempt failed; why?
*/
switch (errno) {
case ENOENT:
/*
* The device doesn't exist.
* That could either mean that there's
* no support for monitoring USB buses
* (which probably means "the usbmon
* module isn't loaded") or that there
* is but that *particular* device
* doesn't exist (no "scan all buses"
* device if the bus index is 0, no
* such bus if the bus index isn't 0).
*/
return PCAP_ERROR_NO_SUCH_DEVICE;
case EACCES:
/*
* We didn't have permission to open it.
*/
return PCAP_ERROR_PERM_DENIED;
default:
/*
* Something went wrong.
*/
pcap_fmt_errmsg_for_errno(handle->errbuf,
PCAP_ERRBUF_SIZE, errno,
"Can't open USB bus file %s", full_path);
return PCAP_ERROR;
}
}
if (handle->opt.rfmon)
{
/*
* Monitor mode doesn't apply to USB devices.
*/
close(handle->fd);
return PCAP_ERROR_RFMON_NOTSUP;
}
/* try to use fast mmap access */
if (usb_mmap(handle))
{
/* We succeeded. */
handle->linktype = DLT_USB_LINUX_MMAPPED;
handle->stats_op = usb_stats_linux_bin;
handle->read_op = usb_read_linux_mmap;
handle->cleanup_op = usb_cleanup_linux_mmap;
#ifdef HAVE_LINUX_USBDEVICE_FS_H
probe_devices(handlep->bus_index);
#endif
/*
* "handle->fd" is a real file, so
* "select()" and "poll()" work on it.
*/
handle->selectable_fd = handle->fd;
return 0;
}
/*
* We failed; try plain binary interface access.
*
* Attempt to set the ring size as appropriate for
* the snapshot length, reducing the snapshot length
* if that'd make the ring bigger than the kernel
* supports.
*/
if (usb_set_ring_size(handle, (int)sizeof(pcap_usb_header)) == -1) {
/* Failed. */
close(handle->fd);
return PCAP_ERROR;
}
handle->stats_op = usb_stats_linux_bin;
handle->read_op = usb_read_linux_bin;
#ifdef HAVE_LINUX_USBDEVICE_FS_H
probe_devices(handlep->bus_index);
#endif
}
else {
/*
* We don't have binary mode support.
* Try opening the text-mode device.
*/
snprintf(full_path, USB_LINE_LEN, USB_TEXT_DIR"/%dt", handlep->bus_index);
handle->fd = open(full_path, O_RDONLY, 0);
if (handle->fd < 0)
{
if (errno == ENOENT)
{
/*
* Not found at the new location; try
* the old location.
*/
snprintf(full_path, USB_LINE_LEN, USB_TEXT_DIR_OLD"/%dt", handlep->bus_index);
handle->fd = open(full_path, O_RDONLY, 0);
}
if (handle->fd < 0) {
if (errno == ENOENT)
{
/*
* The problem is that the file
* doesn't exist. Report that as
* "no such device". (That could
* mean "no such USB bus" or
* "monitoring not supported".)
*/
ret = PCAP_ERROR_NO_SUCH_DEVICE;
}
else if (errno == EACCES)
{
/*
* The problem is that we don't
* have sufficient permission to
* open the file. Report that.
*/
ret = PCAP_ERROR_PERM_DENIED;
}
else
{
/*
* Some other error.
*/
ret = PCAP_ERROR;
}
pcap_fmt_errmsg_for_errno(handle->errbuf,
PCAP_ERRBUF_SIZE, errno,
"Can't open USB bus file %s",
full_path);
return ret;
}
}
if (handle->opt.rfmon)
{
/*
* Monitor mode doesn't apply to USB devices.
*/
close(handle->fd);
return PCAP_ERROR_RFMON_NOTSUP;
}
handle->stats_op = usb_stats_linux;
handle->read_op = usb_read_linux;
}
/*
* "handle->fd" is a real file, so "select()" and "poll()"
* work on it.
*/
handle->selectable_fd = handle->fd;
/* for plain binary access and text access we need to allocate the read
* buffer */
handle->buffer = malloc(handle->bufsize);
if (!handle->buffer) {
pcap_fmt_errmsg_for_errno(handle->errbuf, PCAP_ERRBUF_SIZE,
errno, "malloc");
close(handle->fd);
return PCAP_ERROR;
}
return 0;
}
static inline int
ascii_to_int(char c)
{
return c < 'A' ? c- '0': ((c<'a') ? c - 'A' + 10: c-'a'+10);
}
/*
* see <linux-kernel-source>/Documentation/usb/usbmon.txt and
* <linux-kernel-source>/drivers/usb/mon/mon_text.c for urb string
* format description
*/
static int
usb_read_linux(pcap_t *handle, int max_packets _U_, pcap_handler callback, u_char *user)
{
/* see:
* /usr/src/linux/Documentation/usb/usbmon.txt
* for message format
*/
struct pcap_usb_linux *handlep = handle->priv;
unsigned timestamp;
int tag, cnt, ep_num, dev_addr, dummy, ret, urb_len, data_len;
ssize_t read_ret;
char etype, pipeid1, pipeid2, status[16], urb_tag, line[USB_LINE_LEN];
char *string = line;
u_char * rawdata = handle->buffer;
struct pcap_pkthdr pkth;
pcap_usb_header* uhdr = (pcap_usb_header*)handle->buffer;
u_char urb_transfer=0;
int incoming=0;
/* ignore interrupt system call errors */
do {
read_ret = read(handle->fd, line, USB_LINE_LEN - 1);
if (handle->break_loop)
{
handle->break_loop = 0;
return -2;
}
} while ((read_ret == -1) && (errno == EINTR));
if (read_ret < 0)
{
if (errno == EAGAIN)
return 0; /* no data there */
pcap_fmt_errmsg_for_errno(handle->errbuf, PCAP_ERRBUF_SIZE,
errno, "Can't read from fd %d", handle->fd);
return -1;
}
/* read urb header; %n argument may increment return value, but it's
* not mandatory, so does not count on it*/
string[read_ret] = 0;
ret = sscanf(string, "%x %d %c %c%c:%d:%d %s%n", &tag, ×tamp, &etype,
&pipeid1, &pipeid2, &dev_addr, &ep_num, status,
&cnt);
if (ret < 8)
{
char string_truncated[181];
strncpy(string_truncated, string, sizeof(string_truncated));
string_truncated[sizeof(string_truncated) - 1] = 0;
snprintf(handle->errbuf, PCAP_ERRBUF_SIZE,
"Can't parse USB bus message '%s', too few tokens (expected 8 got %d)",
string_truncated, ret);
return -1;
}
uhdr->id = tag;
uhdr->device_address = dev_addr;
uhdr->bus_id = handlep->bus_index;
uhdr->status = 0;
string += cnt;
/* don't use usbmon provided timestamp, since it have low precision*/
if (gettimeofday(&pkth.ts, NULL) < 0)
{
pcap_fmt_errmsg_for_errno(handle->errbuf, PCAP_ERRBUF_SIZE,
errno, "Can't get timestamp for message '%s'", string);
return -1;
}
uhdr->ts_sec = pkth.ts.tv_sec;
uhdr->ts_usec = (int32_t)pkth.ts.tv_usec;
/* parse endpoint information */
if (pipeid1 == 'C')
urb_transfer = URB_CONTROL;
else if (pipeid1 == 'Z')
urb_transfer = URB_ISOCHRONOUS;
else if (pipeid1 == 'I')
urb_transfer = URB_INTERRUPT;
else if (pipeid1 == 'B')
urb_transfer = URB_BULK;
if (pipeid2 == 'i') {
ep_num |= URB_TRANSFER_IN;
incoming = 1;
}
if (etype == 'C')
incoming = !incoming;
/* direction check*/
if (incoming)
{
if (handle->direction == PCAP_D_OUT)
return 0;
}
else
if (handle->direction == PCAP_D_IN)
return 0;
uhdr->event_type = etype;
uhdr->transfer_type = urb_transfer;
uhdr->endpoint_number = ep_num;
pkth.caplen = sizeof(pcap_usb_header);
rawdata += sizeof(pcap_usb_header);
/* check if this is a setup packet */
ret = sscanf(status, "%d", &dummy);
if (ret != 1)
{
/* this a setup packet, setup data can be filled with underscore if
* usbmon has not been able to read them, so we must parse this fields as
* strings */
pcap_usb_setup* shdr;
char str1[3], str2[3], str3[5], str4[5], str5[5];
ret = sscanf(string, "%s %s %s %s %s%n", str1, str2, str3, str4,
str5, &cnt);
if (ret < 5)
{
snprintf(handle->errbuf, PCAP_ERRBUF_SIZE,
"Can't parse USB bus message '%s', too few tokens (expected 5 got %d)",
string, ret);
return -1;
}
string += cnt;
/* try to convert to corresponding integer */
shdr = &uhdr->setup;
shdr->bmRequestType = strtoul(str1, 0, 16);
shdr->bRequest = strtoul(str2, 0, 16);
shdr->wValue = htols(strtoul(str3, 0, 16));
shdr->wIndex = htols(strtoul(str4, 0, 16));
shdr->wLength = htols(strtoul(str5, 0, 16));
uhdr->setup_flag = 0;
}
else
uhdr->setup_flag = 1;
/* read urb data */
ret = sscanf(string, " %d%n", &urb_len, &cnt);
if (ret < 1)
{
snprintf(handle->errbuf, PCAP_ERRBUF_SIZE,
"Can't parse urb length from '%s'", string);
return -1;
}
string += cnt;
/* urb tag is not present if urb length is 0, so we can stop here
* text parsing */
pkth.len = urb_len+pkth.caplen;
uhdr->urb_len = urb_len;
uhdr->data_flag = 1;
data_len = 0;
if (uhdr->urb_len == 0)
goto got;
/* check for data presence; data is present if and only if urb tag is '=' */
if (sscanf(string, " %c", &urb_tag) != 1)
{
snprintf(handle->errbuf, PCAP_ERRBUF_SIZE,
"Can't parse urb tag from '%s'", string);
return -1;
}
if (urb_tag != '=')
goto got;
/* skip urb tag and following space */
string += 3;
/* if we reach this point we got some urb data*/
uhdr->data_flag = 0;
/* read all urb data; if urb length is greater then the usbmon internal
* buffer length used by the kernel to spool the URB, we get only
* a partial information.
* At least until linux 2.6.17 there is no way to set usbmon intenal buffer
* length and default value is 130. */
while ((string[0] != 0) && (string[1] != 0) && (pkth.caplen < (bpf_u_int32)handle->snapshot))
{
rawdata[0] = ascii_to_int(string[0]) * 16 + ascii_to_int(string[1]);
rawdata++;
string+=2;
if (string[0] == ' ')
string++;
pkth.caplen++;
data_len++;
}
got:
uhdr->data_len = data_len;
if (pkth.caplen > (bpf_u_int32)handle->snapshot)
pkth.caplen = (bpf_u_int32)handle->snapshot;
if (handle->fcode.bf_insns == NULL ||
pcap_filter(handle->fcode.bf_insns, handle->buffer,
pkth.len, pkth.caplen)) {
handlep->packets_read++;
callback(user, &pkth, handle->buffer);
return 1;
}
return 0; /* didn't pass filter */
}
static int
usb_inject_linux(pcap_t *handle, const void *buf _U_, int size _U_)
{
snprintf(handle->errbuf, PCAP_ERRBUF_SIZE,
"Packet injection is not supported on USB devices");
return (-1);
}
static int
usb_stats_linux(pcap_t *handle, struct pcap_stat *stats)
{
struct pcap_usb_linux *handlep = handle->priv;
int dummy, cnt;
ssize_t ret, consumed;
char string[USB_LINE_LEN];
char token[USB_LINE_LEN];
char * ptr = string;
int fd;
snprintf(string, USB_LINE_LEN, USB_TEXT_DIR"/%ds", handlep->bus_index);
fd = open(string, O_RDONLY, 0);
if (fd < 0)
{
if (errno == ENOENT)
{
/*
* Not found at the new location; try the old
* location.
*/
snprintf(string, USB_LINE_LEN, USB_TEXT_DIR_OLD"/%ds", handlep->bus_index);
fd = open(string, O_RDONLY, 0);
}
if (fd < 0) {
pcap_fmt_errmsg_for_errno(handle->errbuf,
PCAP_ERRBUF_SIZE, errno,
"Can't open USB stats file %s", string);
return -1;
}
}
/* read stats line */
do {
ret = read(fd, string, USB_LINE_LEN-1);
} while ((ret == -1) && (errno == EINTR));
close(fd);
if (ret < 0)
{
snprintf(handle->errbuf, PCAP_ERRBUF_SIZE,
"Can't read stats from fd %d ", fd);
return -1;
}
string[ret] = 0;
stats->ps_recv = handlep->packets_read;
stats->ps_drop = 0; /* unless we find text_lost */
stats->ps_ifdrop = 0;
/* extract info on dropped urbs */
for (consumed=0; consumed < ret; ) {
/* from the sscanf man page:
* The C standard says: "Execution of a %n directive does
* not increment the assignment count returned at the completion
* of execution" but the Corrigendum seems to contradict this.
* Do not make any assumptions on the effect of %n conversions
* on the return value and explicitly check for cnt assignmet*/
int ntok;
cnt = -1;
ntok = sscanf(ptr, "%s%n", token, &cnt);
if ((ntok < 1) || (cnt < 0))
break;
consumed += cnt;
ptr += cnt;
if (strcmp(token, "text_lost") == 0)
ntok = sscanf(ptr, "%d%n", &stats->ps_drop, &cnt);
else
ntok = sscanf(ptr, "%d%n", &dummy, &cnt);
if ((ntok != 1) || (cnt < 0))
break;
consumed += cnt;
ptr += cnt;
}
return 0;
}
static int
usb_setdirection_linux(pcap_t *p, pcap_direction_t d)
{
/*
* It's guaranteed, at this point, that d is a valid
* direction value.
*/
p->direction = d;
return 0;
}
static int
usb_stats_linux_bin(pcap_t *handle, struct pcap_stat *stats)
{
struct pcap_usb_linux *handlep = handle->priv;
int ret;
struct mon_bin_stats st;
ret = ioctl(handle->fd, MON_IOCG_STATS, &st);
if (ret < 0)
{
pcap_fmt_errmsg_for_errno(handle->errbuf, PCAP_ERRBUF_SIZE,
errno, "Can't read stats from fd %d", handle->fd);
return -1;
}
stats->ps_recv = handlep->packets_read + st.queued;
stats->ps_drop = st.dropped;
stats->ps_ifdrop = 0;
return 0;
}
/*
* see <linux-kernel-source>/Documentation/usb/usbmon.txt and
* <linux-kernel-source>/drivers/usb/mon/mon_bin.c binary ABI
*/
static int
usb_read_linux_bin(pcap_t *handle, int max_packets _U_, pcap_handler callback, u_char *user)
{
struct pcap_usb_linux *handlep = handle->priv;
struct mon_bin_get info;
int ret;
struct pcap_pkthdr pkth;
u_int clen = handle->snapshot - sizeof(pcap_usb_header);
/* the usb header is going to be part of 'packet' data*/
info.hdr = (pcap_usb_header*) handle->buffer;
info.data = (u_char *)handle->buffer + sizeof(pcap_usb_header);
info.data_len = clen;
/* ignore interrupt system call errors */
do {
ret = ioctl(handle->fd, MON_IOCX_GET, &info);
if (handle->break_loop)
{
handle->break_loop = 0;
return -2;
}
} while ((ret == -1) && (errno == EINTR));
if (ret < 0)
{
if (errno == EAGAIN)
return 0; /* no data there */
pcap_fmt_errmsg_for_errno(handle->errbuf, PCAP_ERRBUF_SIZE,
errno, "Can't read from fd %d", handle->fd);
return -1;
}
/*
* info.hdr->data_len is the number of bytes of isochronous
* descriptors (if any) plus the number of bytes of data
* provided. There are no isochronous descriptors here,
* because we're using the old 48-byte header.
*
* If info.hdr->data_flag is non-zero, there's no URB data;
* info.hdr->urb_len is the size of the buffer into which
* data is to be placed; it does not represent the amount
* of data transferred. If info.hdr->data_flag is zero,
* there is URB data, and info.hdr->urb_len is the number
* of bytes transmitted or received; it doesn't include
* isochronous descriptors.
*
* The kernel may give us more data than the snaplen; if it did,
* reduce the data length so that the total number of bytes we
* tell our client we have is not greater than the snaplen.
*/
if (info.hdr->data_len < clen)
clen = info.hdr->data_len;
info.hdr->data_len = clen;
pkth.caplen = sizeof(pcap_usb_header) + clen;
if (info.hdr->data_flag) {
/*
* No data; just base the on-the-wire length on
* info.hdr->data_len (so that it's >= the captured
* length).
*/
pkth.len = sizeof(pcap_usb_header) + info.hdr->data_len;
} else {
/*
* We got data; base the on-the-wire length on
* info.hdr->urb_len, so that it includes data
* discarded by the USB monitor device due to
* its buffer being too small.
*/
pkth.len = sizeof(pcap_usb_header) + info.hdr->urb_len;
}
pkth.ts.tv_sec = (time_t)info.hdr->ts_sec;
pkth.ts.tv_usec = info.hdr->ts_usec;
if (handle->fcode.bf_insns == NULL ||
pcap_filter(handle->fcode.bf_insns, handle->buffer,
pkth.len, pkth.caplen)) {
handlep->packets_read++;
callback(user, &pkth, handle->buffer);
return 1;
}
return 0; /* didn't pass filter */
}
/*
* see <linux-kernel-source>/Documentation/usb/usbmon.txt and
* <linux-kernel-source>/drivers/usb/mon/mon_bin.c binary ABI
*/
#define VEC_SIZE 32
static int
usb_read_linux_mmap(pcap_t *handle, int max_packets, pcap_handler callback, u_char *user)
{
struct pcap_usb_linux *handlep = handle->priv;
struct mon_bin_mfetch fetch;
int32_t vec[VEC_SIZE];
struct pcap_pkthdr pkth;
pcap_usb_header_mmapped* hdr;
int nflush = 0;
int packets = 0;
u_int clen, max_clen;
max_clen = handle->snapshot - sizeof(pcap_usb_header_mmapped);
for (;;) {
int i, ret;
int limit = max_packets - packets;
if (limit <= 0)
limit = VEC_SIZE;
if (limit > VEC_SIZE)
limit = VEC_SIZE;
/* try to fetch as many events as possible*/
fetch.offvec = vec;
fetch.nfetch = limit;
fetch.nflush = nflush;
/* ignore interrupt system call errors */
do {
ret = ioctl(handle->fd, MON_IOCX_MFETCH, &fetch);
if (handle->break_loop)
{
handle->break_loop = 0;
return -2;
}
} while ((ret == -1) && (errno == EINTR));
if (ret < 0)
{
if (errno == EAGAIN)
return 0; /* no data there */
pcap_fmt_errmsg_for_errno(handle->errbuf,
PCAP_ERRBUF_SIZE, errno, "Can't mfetch fd %d",
handle->fd);
return -1;
}
/* keep track of processed events, we will flush them later */
nflush = fetch.nfetch;
for (i=0; i<fetch.nfetch; ++i) {
/* discard filler */
hdr = (pcap_usb_header_mmapped*) &handlep->mmapbuf[vec[i]];
if (hdr->event_type == '@')
continue;
/*
* hdr->data_len is the number of bytes of
* isochronous descriptors (if any) plus the
* number of bytes of data provided.
*
* If hdr->data_flag is non-zero, there's no
* URB data; hdr->urb_len is the size of the
* buffer into which data is to be placed; it does
* not represent the amount of data transferred.
* If hdr->data_flag is zero, there is URB data,
* and hdr->urb_len is the number of bytes
* transmitted or received; it doesn't include
* isochronous descriptors.
*
* The kernel may give us more data than the
* snaplen; if it did, reduce the data length
* so that the total number of bytes we
* tell our client we have is not greater than
* the snaplen.
*/
clen = max_clen;
if (hdr->data_len < clen)
clen = hdr->data_len;
pkth.caplen = sizeof(pcap_usb_header_mmapped) + clen;
if (hdr->data_flag) {
/*
* No data; just base the on-the-wire length
* on hdr->data_len (so that it's >= the
* captured length).
*/
pkth.len = sizeof(pcap_usb_header_mmapped) +
hdr->data_len;
} else {
/*
* We got data; base the on-the-wire length
* on hdr->urb_len, so that it includes
* data discarded by the USB monitor device
* due to its buffer being too small.
*/
pkth.len = sizeof(pcap_usb_header_mmapped) +
(hdr->ndesc * sizeof (usb_isodesc)) + hdr->urb_len;
}
pkth.ts.tv_sec = (time_t)hdr->ts_sec;
pkth.ts.tv_usec = hdr->ts_usec;
if (handle->fcode.bf_insns == NULL ||
pcap_filter(handle->fcode.bf_insns, (u_char*) hdr,
pkth.len, pkth.caplen)) {
handlep->packets_read++;
callback(user, &pkth, (u_char*) hdr);
packets++;
}
}
/* with max_packets specifying "unlimited" we stop after the first chunk*/
if (PACKET_COUNT_IS_UNLIMITED(max_packets) || (packets == max_packets))
break;
}
/* flush pending events*/
if (ioctl(handle->fd, MON_IOCH_MFLUSH, nflush) == -1) {
pcap_fmt_errmsg_for_errno(handle->errbuf, PCAP_ERRBUF_SIZE,
errno, "Can't mflush fd %d", handle->fd);
return -1;
}
return packets;
}
static void
usb_cleanup_linux_mmap(pcap_t* handle)
{
struct pcap_usb_linux *handlep = handle->priv;
/* if we have a memory-mapped buffer, unmap it */
if (handlep->mmapbuf != NULL) {
munmap(handlep->mmapbuf, handlep->mmapbuflen);
handlep->mmapbuf = NULL;
}
pcap_cleanup_live_common(handle);
}
|