1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
|
.TH LIBPFM 3 "September, 2009" "" "Linux Programmer's Manual"
.SH NAME
libpfm_intel_nhm - support for Intel Nehalem core PMU
.SH SYNOPSIS
.nf
.B #include <perfmon/pfmlib.h>
.sp
.B PMU name: nhm
.B PMU desc: Intel Nehalem
.B PMU name: nhm_ex
.B PMU desc: Intel Nehalem EX
.sp
.SH DESCRIPTION
The library supports the Intel Nehalem core PMU. It should be noted that
this PMU model only covers the each core's PMU and not the socket level
PMU. It is provided separately. Support is provided for the Intel Core i7
and Core i5 processors.
.SH MODIFIERS
The following modifiers are supported on Intel Nehalem processors:
.TP
.B u
Measure at user level which includes privilege levels 1, 2, 3. This corresponds to \fBPFM_PLM3\fR.
This is a boolean modifier.
.TP
.B k
Measure at kernel level which includes privilege level 0. This corresponds to \fBPFM_PLM0\fR.
This is a boolean modifier.
.TP
.B i
Invert the meaning of the event. The counter will now count cycles in which the event is \fBnot\fR
occurring. This is a boolean modifier
.TP
.B e
Enable edge detection, i.e., count only when there is a state transition from no occurrence of the event
to at least one occurrence. This modifier must be combined with a counter mask modifier (m) with a value greater or equal to one.
This is a boolean modifier.
.TP
.B c
Set the counter mask value. The mask acts as a threshold. The counter will count the number of cycles
in which the number of occurrences of the event is greater or equal to the threshold. This is an integer
modifier with values in the range [0:255].
.TP
.B t
Measure on both threads at the same time assuming hyper-threading is enabled. This is a boolean modifier.
.TP
.B ldlat
Pass a latency threshold to the MEM_INST_RETIRED:LATENCY_ABOVE_THRESHOLD event.
This is an integer attribute that must be in the range [1:65535]. It is required
for this event. Note that the event must be used with precise sampling (PEBS).
.SH OFFCORE_RESPONSE event
The library is able to encode the OFFCORE_RESPONSE_0 event. This is a special event because it
needs a second MSR (0x1a6) to be programmed for the event to count properly. Thus two values
are necessary. The first value can be programmed on any of the generic counters. The second value
goes into the dedicated MSR (0x1a6).
The OFFCORE_RESPONSE event is exposed as a normal event with several umasks which are divided in two
groups: request and response. The user must provide \fBat least\fR one umask from each group.
For instance, OFFCORE_RESPONSE_0:ANY_DATA:LOCAL_DRAM.
When using \fBpfm_get_event_encoding()\fR, two 64-bit values are returned. The first value
corresponds to what needs to be programmed into any of the generic counters. The second value
must be programmed into the dedicated MSR (0x1a6).
When using an OS-specific encoding routine, the way the event is encoded is OS specific. Refer to
the corresponding man page for more information.
.SH AUTHORS
.nf
Stephane Eranian <eranian@gmail.com>
.if
.PP
|
