/****************************************************************************

 Copyright (C) 2002-2014 Gilles Debunne. All rights reserved.

 This file is part of the QGLViewer library version 2.6.3.

 http://www.libqglviewer.com - contact@libqglviewer.com

 This file may be used under the terms of the GNU General Public License 
 versions 2.0 or 3.0 as published by the Free Software Foundation and
 appearing in the LICENSE file included in the packaging of this file.
 In addition, as a special exception, Gilles Debunne gives you certain 
 additional rights, described in the file GPL_EXCEPTION in this package.

 libQGLViewer uses dual licensing. Commercial/proprietary software must
 purchase a libQGLViewer Commercial License.

 This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
 WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

*****************************************************************************/

#include "domUtils.h"
#include "camera.h"
#include "qglviewer.h"
#include "manipulatedCameraFrame.h"

using namespace std;
using namespace qglviewer;

/*! Default constructor.

 sceneCenter() is set to (0,0,0) and sceneRadius() is set to 1.0. type() is Camera::PERSPECTIVE,
 with a \c M_PI/4 fieldOfView().

 See IODistance(), physicalDistanceToScreen(), physicalScreenWidth() and focusDistance()
 documentations for default stereo parameter values. */
Camera::Camera()
	: frame_(NULL), fieldOfView_(M_PI/4.0), modelViewMatrixIsUpToDate_(false), projectionMatrixIsUpToDate_(false)
{
	// #CONNECTION# Camera copy constructor
	interpolationKfi_ = new KeyFrameInterpolator;
	// Requires the interpolationKfi_
	setFrame(new ManipulatedCameraFrame());

	// #CONNECTION# All these default values identical in initFromDOMElement.

	// Requires fieldOfView() to define focusDistance()
	setSceneRadius(1.0);

	// Initial value (only scaled after this)
	orthoCoef_ = tan(fieldOfView()/2.0);

	// Also defines the pivotPoint(), which changes orthoCoef_. Requires a frame().
	setSceneCenter(Vec(0.0, 0.0, 0.0));

	// Requires fieldOfView() when called with ORTHOGRAPHIC. Attention to projectionMatrix_ below.
	setType(PERSPECTIVE);

	// #CONNECTION# initFromDOMElement default values
	setZNearCoefficient(0.005);
	setZClippingCoefficient(sqrt(3.0));

	// Dummy values
	setScreenWidthAndHeight(600, 400);

	// Stereo parameters
	setIODistance(0.062);
	setPhysicalScreenWidth(0.5);
	// focusDistance is set from setFieldOfView()

	// #CONNECTION# Camera copy constructor
	for (unsigned short j=0; j<16; ++j)
	{
		modelViewMatrix_[j] = ((j%5 == 0) ? 1.0 : 0.0);
		// #CONNECTION# computeProjectionMatrix() is lazy and assumes 0.0 almost everywhere.
		projectionMatrix_[j] = 0.0;
	}
	computeProjectionMatrix();
}

/*! Virtual destructor.

 The frame() is deleted, but the different keyFrameInterpolator() are \e not deleted (in case they
 are shared). */
Camera::~Camera()
{
	delete frame_;
	delete interpolationKfi_;
}


/*! Copy constructor. Performs a deep copy using operator=(). */
Camera::Camera(const Camera& camera)
	: QObject(), frame_(NULL)
{
	// #CONNECTION# Camera constructor
	interpolationKfi_ = new KeyFrameInterpolator;
	// Requires the interpolationKfi_
	setFrame(new ManipulatedCameraFrame(*camera.frame()));

	for (unsigned short j=0; j<16; ++j)
	{
		modelViewMatrix_[j] = ((j%5 == 0) ? 1.0 : 0.0);
		// #CONNECTION# computeProjectionMatrix() is lazy and assumes 0.0 almost everywhere.
		projectionMatrix_[j] = 0.0;
	}

	(*this)=camera;
}

/*! Equal operator.

 All the parameters of \p camera are copied. The frame() pointer is not modified, but its
 Frame::position() and Frame::orientation() are set to those of \p camera.

 \attention The Camera screenWidth() and screenHeight() are set to those of \p camera. If your
 Camera is associated with a QGLViewer, you should update these value after the call to this method:
 \code
 *(camera()) = otherCamera;
 camera()->setScreenWidthAndHeight(width(), height());
 \endcode
 The same applies to sceneCenter() and sceneRadius(), if needed. */
Camera& Camera::operator=(const Camera& camera)
{
	setScreenWidthAndHeight(camera.screenWidth(), camera.screenHeight());
	setFieldOfView(camera.fieldOfView());
	setSceneRadius(camera.sceneRadius());
	setSceneCenter(camera.sceneCenter());
	setZNearCoefficient(camera.zNearCoefficient());
	setZClippingCoefficient(camera.zClippingCoefficient());
	setType(camera.type());

	// Stereo parameters
	setIODistance(camera.IODistance());
	setFocusDistance(camera.focusDistance());
	setPhysicalScreenWidth(camera.physicalScreenWidth());

	orthoCoef_ = camera.orthoCoef_;
	projectionMatrixIsUpToDate_ = false;

	// frame_ and interpolationKfi_ pointers are not shared.
	frame_->setReferenceFrame(NULL);
	frame_->setPosition(camera.position());
	frame_->setOrientation(camera.orientation());

	interpolationKfi_->resetInterpolation();

	kfi_ = camera.kfi_;

	computeProjectionMatrix();
	computeModelViewMatrix();

	return *this;
}

/*! Sets Camera screenWidth() and screenHeight() (expressed in pixels).

You should not call this method when the Camera is associated with a QGLViewer, since the
latter automatically updates these values when it is resized (hence overwritting your values).

Non-positive dimension are silently replaced by a 1 pixel value to ensure frustrum coherence.

If your Camera is used without a QGLViewer (offscreen rendering, shadow maps), use setAspectRatio()
instead to define the projection matrix. */
void Camera::setScreenWidthAndHeight(int width, int height)
{
	// Prevent negative and zero dimensions that would cause divisions by zero.
	screenWidth_  = width > 0 ? width : 1;
	screenHeight_ = height > 0 ? height : 1;
	projectionMatrixIsUpToDate_ = false;
}

/*! Returns the near clipping plane distance used by the Camera projection matrix.

 The clipping planes' positions depend on the sceneRadius() and sceneCenter() rather than being fixed
 small-enough and large-enough values. A good scene dimension approximation will hence result in an
 optimal precision of the z-buffer.

 The near clipping plane is positioned at a distance equal to zClippingCoefficient() * sceneRadius()
 in front of the sceneCenter():
 \code
 zNear = distanceToSceneCenter() - zClippingCoefficient()*sceneRadius();
 \endcode

 In order to prevent negative or too small zNear() values (which would degrade the z precision),
 zNearCoefficient() is used when the Camera is inside the sceneRadius() sphere:
 \code
 const qreal zMin = zNearCoefficient() * zClippingCoefficient() * sceneRadius();
 if (zNear < zMin)
   zNear = zMin;
 // With an ORTHOGRAPHIC type, the value is simply clamped to 0.0
 \endcode

 See also the zFar(), zClippingCoefficient() and zNearCoefficient() documentations.

 If you need a completely different zNear computation, overload the zNear() and zFar() methods in a
 new class that publicly inherits from Camera and use QGLViewer::setCamera():
 \code
 class myCamera :: public qglviewer::Camera
 {
   virtual qreal Camera::zNear() const { return 0.001; };
   virtual qreal Camera::zFar() const { return 100.0; };
 }
 \endcode

 See the <a href="../examples/standardCamera.html">standardCamera example</a> for an application.

 \attention The value is always positive although the clipping plane is positioned at a negative z
 value in the Camera coordinate system. This follows the \c gluPerspective standard. */
qreal Camera::zNear() const
{
	const qreal zNearScene = zClippingCoefficient() * sceneRadius();
	qreal z = distanceToSceneCenter() - zNearScene;

	// Prevents negative or null zNear values.
	const qreal zMin = zNearCoefficient() * zNearScene;
	if (z < zMin)
		switch (type())
		{
			case Camera::PERSPECTIVE  : z = zMin; break;
			case Camera::ORTHOGRAPHIC : z = 0.0;  break;
		}
	return z;
}

/*! Returns the far clipping plane distance used by the Camera projection matrix.

The far clipping plane is positioned at a distance equal to zClippingCoefficient() * sceneRadius()
behind the sceneCenter():
\code
zFar = distanceToSceneCenter() + zClippingCoefficient()*sceneRadius();
\endcode

See the zNear() documentation for details. */
qreal Camera::zFar() const
{
	return distanceToSceneCenter() + zClippingCoefficient() * sceneRadius();
}


/*! Sets the vertical fieldOfView() of the Camera (in radians).

Note that focusDistance() is set to sceneRadius() / tan(fieldOfView()/2) by this method. */
void Camera::setFieldOfView(qreal fov) {
	fieldOfView_ = fov;
	setFocusDistance(sceneRadius() / tan(fov/2.0));
	projectionMatrixIsUpToDate_ = false;
}

/*! Defines the Camera type().

Changing the camera Type alters the viewport and the objects' sizes can be changed.
This method garantees that the two frustum match in a plane normal to viewDirection(), passing through the pivotPoint().

Prefix the type with \c Camera if needed, as in:
\code
camera()->setType(Camera::ORTHOGRAPHIC);
// or even qglviewer::Camera::ORTHOGRAPHIC if you do not use namespace
\endcode */
void Camera::setType(Type type)
{
	// make ORTHOGRAPHIC frustum fit PERSPECTIVE (at least in plane normal to viewDirection(), passing
	// through RAP). Done only when CHANGING type since orthoCoef_ may have been changed with a
	// setPivotPoint() in the meantime.
	if ( (type == Camera::ORTHOGRAPHIC) && (type_ == Camera::PERSPECTIVE) )
		orthoCoef_ = tan(fieldOfView()/2.0);
	type_ = type;
	projectionMatrixIsUpToDate_ = false;
}

/*! Sets the Camera frame().

If you want to move the Camera, use setPosition() and setOrientation() or one of the Camera
positioning methods (lookAt(), fitSphere(), showEntireScene()...) instead.

If you want to save the Camera position(), there's no need to call this method either. Use
addKeyFrameToPath() and playPath() instead.

This method is actually mainly useful if you derive the ManipulatedCameraFrame class and want to
use an instance of your new class to move the Camera.

A \c NULL \p mcf pointer will silently be ignored. The calling method is responsible for
deleting the previous frame() pointer if needed in order to prevent memory leaks. */
void Camera::setFrame(ManipulatedCameraFrame* const mcf)
{
	if (!mcf)
		return;

	if (frame_) {
		disconnect(frame_, SIGNAL(modified()), this, SLOT(onFrameModified()));
	}

	frame_ = mcf;
	interpolationKfi_->setFrame(frame());

	connect(frame_, SIGNAL(modified()), this, SLOT(onFrameModified()));
	onFrameModified();
}

/*! Returns the distance from the Camera center to sceneCenter(), projected along the Camera Z axis.
  Used by zNear() and zFar() to optimize the Z range. */
qreal Camera::distanceToSceneCenter() const
{
	return fabs((frame()->coordinatesOf(sceneCenter())).z);
}


/*! Returns the \p halfWidth and \p halfHeight of the Camera orthographic frustum.

 These values are only valid and used when the Camera is of type() Camera::ORTHOGRAPHIC. They are
 expressed in OpenGL units and are used by loadProjectionMatrix() to define the projection matrix
 using:
 \code
 glOrtho( -halfWidth, halfWidth, -halfHeight, halfHeight, zNear(), zFar() )
 \endcode

 These values are proportional to the Camera (z projected) distance to the pivotPoint().
 When zooming on the object, the Camera is translated forward \e and its frustum is narrowed, making
 the object appear bigger on screen, as intuitively expected.

 Overload this method to change this behavior if desired, as is done in the
 <a href="../examples/standardCamera.html">standardCamera example</a>. */
void Camera::getOrthoWidthHeight(GLdouble& halfWidth, GLdouble& halfHeight) const
{
	const qreal dist = orthoCoef_ * fabs(cameraCoordinatesOf(pivotPoint()).z);
	//#CONNECTION# fitScreenRegion
	halfWidth  = dist * ((aspectRatio() < 1.0) ? 1.0 : aspectRatio());
	halfHeight = dist * ((aspectRatio() < 1.0) ? 1.0/aspectRatio() : 1.0);
}


/*! Computes the projection matrix associated with the Camera.

 If type() is Camera::PERSPECTIVE, defines a \c GL_PROJECTION matrix similar to what would \c
 gluPerspective() do using the fieldOfView(), window aspectRatio(), zNear() and zFar() parameters.

 If type() is Camera::ORTHOGRAPHIC, the projection matrix is as what \c glOrtho() would do.
 Frustum's width and height are set using getOrthoWidthHeight().

 Both types use zNear() and zFar() to place clipping planes. These values are determined from
 sceneRadius() and sceneCenter() so that they best fit the scene size.

 Use getProjectionMatrix() to retrieve this matrix. Overload loadProjectionMatrix() if you want your
 Camera to use an exotic projection matrix.

 \note You must call this method if your Camera is not associated with a QGLViewer and is used for
 offscreen computations (using (un)projectedCoordinatesOf() for instance). loadProjectionMatrix()
 does it otherwise. */
void Camera::computeProjectionMatrix() const
{
	if (projectionMatrixIsUpToDate_) return;

	const qreal ZNear = zNear();
	const qreal ZFar  = zFar();

	switch (type())
	{
		case Camera::PERSPECTIVE:
		{
			// #CONNECTION# all non null coefficients were set to 0.0 in constructor.
			const qreal f = 1.0/tan(fieldOfView()/2.0);
			projectionMatrix_[0]  = f/aspectRatio();
			projectionMatrix_[5]  = f;
			projectionMatrix_[10] = (ZNear + ZFar) / (ZNear - ZFar);
			projectionMatrix_[11] = -1.0;
			projectionMatrix_[14] = 2.0 * ZNear * ZFar / (ZNear - ZFar);
			projectionMatrix_[15] = 0.0;
			// same as gluPerspective( 180.0*fieldOfView()/M_PI, aspectRatio(), zNear(), zFar() );
			break;
		}
		case Camera::ORTHOGRAPHIC:
		{
			GLdouble w, h;
			getOrthoWidthHeight(w,h);
			projectionMatrix_[0]  = 1.0/w;
			projectionMatrix_[5]  = 1.0/h;
			projectionMatrix_[10] = -2.0/(ZFar - ZNear);
			projectionMatrix_[11] = 0.0;
			projectionMatrix_[14] = -(ZFar + ZNear)/(ZFar - ZNear);
			projectionMatrix_[15] = 1.0;
			// same as glOrtho( -w, w, -h, h, zNear(), zFar() );
			break;
		}
	}

	projectionMatrixIsUpToDate_ = true;
}

/*! Computes the modelView matrix associated with the Camera's position() and orientation().

 This matrix converts from the world coordinates system to the Camera coordinates system, so that
 coordinates can then be projected on screen using the projection matrix (see computeProjectionMatrix()).

 Use getModelViewMatrix() to retrieve this matrix.

 \note You must call this method if your Camera is not associated with a QGLViewer and is used for
 offscreen computations (using (un)projectedCoordinatesOf() for instance). loadModelViewMatrix()
 does it otherwise. */
void Camera::computeModelViewMatrix() const
{
	if (modelViewMatrixIsUpToDate_) return;

	const Quaternion q = frame()->orientation();

	const qreal q00 = 2.0 * q[0] * q[0];
	const qreal q11 = 2.0 * q[1] * q[1];
	const qreal q22 = 2.0 * q[2] * q[2];

	const qreal q01 = 2.0 * q[0] * q[1];
	const qreal q02 = 2.0 * q[0] * q[2];
	const qreal q03 = 2.0 * q[0] * q[3];

	const qreal q12 = 2.0 * q[1] * q[2];
	const qreal q13 = 2.0 * q[1] * q[3];

	const qreal q23 = 2.0 * q[2] * q[3];

	modelViewMatrix_[0] = 1.0 - q11 - q22;
	modelViewMatrix_[1] =       q01 - q23;
	modelViewMatrix_[2] =       q02 + q13;
	modelViewMatrix_[3] = 0.0;

	modelViewMatrix_[4] =       q01 + q23;
	modelViewMatrix_[5] = 1.0 - q22 - q00;
	modelViewMatrix_[6] =       q12 - q03;
	modelViewMatrix_[7] = 0.0;

	modelViewMatrix_[8] =        q02 - q13;
	modelViewMatrix_[9] =        q12 + q03;
	modelViewMatrix_[10] = 1.0 - q11 - q00;
	modelViewMatrix_[11] = 0.0;

	const Vec t = q.inverseRotate(frame()->position());

	modelViewMatrix_[12] = -t.x;
	modelViewMatrix_[13] = -t.y;
	modelViewMatrix_[14] = -t.z;
	modelViewMatrix_[15] = 1.0;

	modelViewMatrixIsUpToDate_ = true;
}


/*! Loads the OpenGL \c GL_PROJECTION matrix with the Camera projection matrix.

 The Camera projection matrix is computed using computeProjectionMatrix().

 When \p reset is \c true (default), the method clears the previous projection matrix by calling \c
 glLoadIdentity before setting the matrix. Setting \p reset to \c false is useful for \c GL_SELECT
 mode, to combine the pushed matrix with a picking matrix. See QGLViewer::beginSelection() for details.

 This method is used by QGLViewer::preDraw() (called before user's QGLViewer::draw() method) to
 set the \c GL_PROJECTION matrix according to the viewer's QGLViewer::camera() settings.

 Use getProjectionMatrix() to retrieve this matrix. Overload this method if you want your Camera to
 use an exotic projection matrix. See also loadModelViewMatrix().

 \attention \c glMatrixMode is set to \c GL_PROJECTION.

 \attention If you use several OpenGL contexts and bypass the Qt main refresh loop, you should call
 QGLWidget::makeCurrent() before this method in order to activate the right OpenGL context. */
void Camera::loadProjectionMatrix(bool reset) const
{
	// WARNING: makeCurrent must be called by every calling method
	glMatrixMode(GL_PROJECTION);

	if (reset)
		glLoadIdentity();

	computeProjectionMatrix();

	glMultMatrixd(projectionMatrix_);
}

/*! Loads the OpenGL \c GL_MODELVIEW matrix with the modelView matrix corresponding to the Camera.

 Calls computeModelViewMatrix() to compute the Camera's modelView matrix.

 This method is used by QGLViewer::preDraw() (called before user's QGLViewer::draw() method) to
 set the \c GL_MODELVIEW matrix according to the viewer's QGLViewer::camera() position() and
 orientation().

 As a result, the vertices used in QGLViewer::draw() can be defined in the so called world
 coordinate system. They are multiplied by this matrix to get converted to the Camera coordinate
 system, before getting projected using the \c GL_PROJECTION matrix (see loadProjectionMatrix()).

 When \p reset is \c true (default), the method loads (overwrites) the \c GL_MODELVIEW matrix. Setting
 \p reset to \c false simply calls \c glMultMatrixd (might be useful for some applications).

 Overload this method or simply call glLoadMatrixd() at the beginning of QGLViewer::draw() if you
 want your Camera to use an exotic modelView matrix. See also loadProjectionMatrix().

 getModelViewMatrix() returns the 4x4 modelView matrix.

 \attention glMatrixMode is set to \c GL_MODELVIEW

 \attention If you use several OpenGL contexts and bypass the Qt main refresh loop, you should call
 QGLWidget::makeCurrent() before this method in order to activate the right OpenGL context. */
void Camera::loadModelViewMatrix(bool reset) const
{
	// WARNING: makeCurrent must be called by every calling method
	glMatrixMode(GL_MODELVIEW);
	computeModelViewMatrix();
	if (reset)
		glLoadMatrixd(modelViewMatrix_);
	else
		glMultMatrixd(modelViewMatrix_);
}

/*! Same as loadProjectionMatrix() but for a stereo setup.

 Only the Camera::PERSPECTIVE type() is supported for stereo mode. See
 QGLViewer::setStereoDisplay().

 Uses focusDistance(), IODistance(), and physicalScreenWidth() to compute cameras
 offset and asymmetric frustums.

 When \p leftBuffer is \c true, computes the projection matrix associated to the left eye (right eye
 otherwise). See also loadModelViewMatrixStereo().

 See the <a href="../examples/stereoViewer.html">stereoViewer</a> and the <a
 href="../examples/contribs.html#anaglyph">anaglyph</a> examples for an illustration.

 To retrieve this matrix, use a code like:
 \code
 glMatrixMode(GL_PROJECTION);
 glPushMatrix();
 loadProjectionMatrixStereo(left_or_right);
 glGetDoublev(GL_PROJECTION_MATRIX, m);
 glPopMatrix();
 \endcode
 Note that getProjectionMatrix() always returns the mono-vision matrix.

 \attention glMatrixMode is set to \c GL_PROJECTION. */
void Camera::loadProjectionMatrixStereo(bool leftBuffer) const
{
	qreal left, right, bottom, top;
	qreal screenHalfWidth, halfWidth, side, shift, delta;

	glMatrixMode(GL_PROJECTION);
	glLoadIdentity();

	switch (type())
	{
		case Camera::PERSPECTIVE:
			// compute half width of screen,
			// corresponding to zero parallax plane to deduce decay of cameras
			screenHalfWidth = focusDistance() * tan(horizontalFieldOfView() / 2.0);
			shift = screenHalfWidth * IODistance() / physicalScreenWidth();
			// should be * current y  / y total
			// to take into account that the window doesn't cover the entire screen

			// compute half width of "view" at znear and the delta corresponding to
			// the shifted camera to deduce what to set for asymmetric frustums
			halfWidth = zNear() * tan(horizontalFieldOfView() / 2.0);
			delta  = shift * zNear() / focusDistance();
			side   = leftBuffer ? -1.0 : 1.0;

			left   = -halfWidth + side * delta;
			right  =  halfWidth + side * delta;
			top    = halfWidth / aspectRatio();
			bottom = -top;
			glFrustum(left, right, bottom, top, zNear(), zFar() );
			break;

		case Camera::ORTHOGRAPHIC:
			qWarning("Camera::setProjectionMatrixStereo: Stereo not available with Ortho mode");
			break;
	}
}

/*! Same as loadModelViewMatrix() but for a stereo setup.

 Only the Camera::PERSPECTIVE type() is supported for stereo mode. See
 QGLViewer::setStereoDisplay().

 The modelView matrix is almost identical to the mono-vision one. It is simply translated along its
 horizontal axis by a value that depends on stereo parameters (see focusDistance(),
 IODistance(), and physicalScreenWidth()).

 When \p leftBuffer is \c true, computes the modelView matrix associated to the left eye (right eye
 otherwise).

 loadProjectionMatrixStereo() explains how to retrieve to resulting matrix.

 See the <a href="../examples/stereoViewer.html">stereoViewer</a> and the <a
 href="../examples/contribs.html#anaglyph">anaglyph</a> examples for an illustration.

 \attention glMatrixMode is set to \c GL_MODELVIEW. */
void Camera::loadModelViewMatrixStereo(bool leftBuffer) const
{
	// WARNING: makeCurrent must be called by every calling method
	glMatrixMode(GL_MODELVIEW);

	qreal halfWidth = focusDistance() * tan(horizontalFieldOfView() / 2.0);
	qreal shift     = halfWidth * IODistance() / physicalScreenWidth(); // * current window width / full screen width

	computeModelViewMatrix();
	if (leftBuffer)
		modelViewMatrix_[12] -= shift;
	else
		modelViewMatrix_[12] += shift;
	glLoadMatrixd(modelViewMatrix_);
}

/*! Fills \p m with the Camera projection matrix values.

 Based on computeProjectionMatrix() to make sure the Camera projection matrix is up to date.

 This matrix only reflects the Camera's internal parameters and it may differ from the \c
 GL_PROJECTION matrix retrieved using \c glGetDoublev(GL_PROJECTION_MATRIX, m). It actually
 represents the state of the \c GL_PROJECTION after QGLViewer::preDraw(), at the beginning of
 QGLViewer::draw(). If you modified the \c GL_PROJECTION matrix (for instance using
 QGLViewer::startScreenCoordinatesSystem()), the two results differ.

 The result is an OpenGL 4x4 matrix, which is given in \e column-major order (see \c glMultMatrix
 man page for details).

 See also getModelViewMatrix() and setFromProjectionMatrix(). */
void Camera::getProjectionMatrix(GLdouble m[16]) const
{
	computeProjectionMatrix();
	for (unsigned short i=0; i<16; ++i)
		m[i] = projectionMatrix_[i];
}

/*! Overloaded getProjectionMatrix(GLdouble m[16]) method using a \c GLfloat array instead. */
void Camera::getProjectionMatrix(GLfloat m[16]) const
{
	static GLdouble mat[16];
	getProjectionMatrix(mat);
	for (unsigned short i=0; i<16; ++i)
		m[i] = float(mat[i]);
}

/*! Fills \p m with the Camera modelView matrix values.

 First calls computeModelViewMatrix() to define the Camera modelView matrix.

 Note that this matrix may \e not be the one you would get from a \c
 glGetDoublev(GL_MODELVIEW_MATRIX, m). It actually represents the state of the \c
 GL_MODELVIEW after QGLViewer::preDraw(), at the \e beginning of QGLViewer::draw(). It converts from
 the world to the Camera coordinate system. As soon as you modify the \c GL_MODELVIEW in your
 QGLViewer::draw() method (using glTranslate, glRotate... or similar methods), the two matrices differ.

 The result is an OpenGL 4x4 matrix, which is given in \e column-major order (see \c glMultMatrix
 man page for details).

 See also getProjectionMatrix() and setFromModelViewMatrix(). */
void Camera::getModelViewMatrix(GLdouble m[16]) const
{
	// May not be needed, but easier like this.
	// Prevents from retrieving matrix in stereo mode -> overwrites shifted value.
	computeModelViewMatrix();
	for (unsigned short i=0; i<16; ++i)
		m[i] = modelViewMatrix_[i];
}


/*! Overloaded getModelViewMatrix(GLdouble m[16]) method using a \c GLfloat array instead. */
void Camera::getModelViewMatrix(GLfloat m[16]) const
{
	static GLdouble mat[16];
	getModelViewMatrix(mat);
	for (unsigned short i=0; i<16; ++i)
		m[i] = float(mat[i]);
}

/*! Fills \p m with the product of the ModelView and Projection matrices.

  Calls getModelViewMatrix() and getProjectionMatrix() and then fills \p m with the product of these two matrices. */
void Camera::getModelViewProjectionMatrix(GLdouble m[16]) const
{
	GLdouble mv[16];
	GLdouble proj[16];
	getModelViewMatrix(mv);
	getProjectionMatrix(proj);

	for (unsigned short i=0; i<4; ++i)
	{
		for (unsigned short j=0; j<4; ++j)
		{
			qreal sum = 0.0;
			for (unsigned short k=0; k<4; ++k)
				sum += proj[i+4*k]*mv[k+4*j];
			m[i+4*j] = sum;
		}
	}
}

/*! Overloaded getModelViewProjectionMatrix(GLdouble m[16]) method using a \c GLfloat array instead. */
void Camera::getModelViewProjectionMatrix(GLfloat m[16]) const
{
	static GLdouble mat[16];
	getModelViewProjectionMatrix(mat);
	for (unsigned short i=0; i<16; ++i)
		m[i] = float(mat[i]);
}

/*! Sets the sceneRadius() value. Negative values are ignored.

\attention This methods also sets focusDistance() to sceneRadius() / tan(fieldOfView()/2) and
flySpeed() to 1% of sceneRadius(). */
void Camera::setSceneRadius(qreal radius)
{
	if (radius <= 0.0)
	{
		qWarning("Scene radius must be positive - Ignoring value");
		return;
	}

	sceneRadius_ = radius;
	projectionMatrixIsUpToDate_ = false;

	setFocusDistance(sceneRadius() / tan(fieldOfView()/2.0));

	frame()->setFlySpeed(0.01*sceneRadius());
}

/*! Similar to setSceneRadius() and setSceneCenter(), but the scene limits are defined by a (world
  axis aligned) bounding box. */
void Camera::setSceneBoundingBox(const Vec& min, const Vec& max)
{
	setSceneCenter((min+max)/2.0);
	setSceneRadius(0.5*(max-min).norm());
}


/*! Sets the sceneCenter().

 \attention This method also sets the pivotPoint() to sceneCenter(). */
void Camera::setSceneCenter(const Vec& center)
{
	sceneCenter_ = center;
	setPivotPoint(sceneCenter());
	projectionMatrixIsUpToDate_ = false;
}

/*! setSceneCenter() to the result of pointUnderPixel(\p pixel).

  Returns \c true if a pointUnderPixel() was found and sceneCenter() was actually changed.

  See also setPivotPointFromPixel(). See the pointUnderPixel() documentation. */
bool Camera::setSceneCenterFromPixel(const QPoint& pixel)
{
	bool found;
	Vec point = pointUnderPixel(pixel, found);
	if (found)
		setSceneCenter(point);
	return found;
}

#ifndef DOXYGEN
void Camera::setRevolveAroundPoint(const Vec& point) {
	qWarning("setRevolveAroundPoint() is deprecated, use setPivotPoint() instead");
	setPivotPoint(point);
}
bool Camera::setRevolveAroundPointFromPixel(const QPoint& pixel) {
	qWarning("setRevolveAroundPointFromPixel() is deprecated, use setPivotPointFromPixel() instead");
	return setPivotPointFromPixel(pixel);
}
Vec Camera::revolveAroundPoint() const {
	qWarning("revolveAroundPoint() is deprecated, use pivotPoint() instead");
	return pivotPoint();
}
#endif

/*! Changes the pivotPoint() to \p point (defined in the world coordinate system). */
void Camera::setPivotPoint(const Vec& point)
{
	const qreal prevDist = fabs(cameraCoordinatesOf(pivotPoint()).z);

	// If frame's RAP is set directly, projectionMatrixIsUpToDate_ should also be
	// set to false to ensure proper recomputation of the ORTHO projection matrix.
	frame()->setPivotPoint(point);

	// orthoCoef_ is used to compensate for changes of the pivotPoint, so that the image does
	// not change when the pivotPoint is changed in ORTHOGRAPHIC mode.
	const qreal newDist = fabs(cameraCoordinatesOf(pivotPoint()).z);
	// Prevents division by zero when rap is set to camera position
	if ((prevDist > 1E-9) && (newDist > 1E-9))
		orthoCoef_ *= prevDist / newDist;
	projectionMatrixIsUpToDate_ = false;
}

/*! The pivotPoint() is set to the point located under \p pixel on screen.

Returns \c true if a pointUnderPixel() was found. If no point was found under \p pixel, the
pivotPoint() is left unchanged.

\p pixel is expressed in Qt format (origin in the upper left corner of the window). See
pointUnderPixel().

See also setSceneCenterFromPixel(). */
bool Camera::setPivotPointFromPixel(const QPoint& pixel)
{
	bool found;
	Vec point = pointUnderPixel(pixel, found);
	if (found)
		setPivotPoint(point);
	return found;
}

/*! Returns the ratio between pixel and OpenGL units at \p position.

 A line of \c n * pixelGLRatio() OpenGL units, located at \p position in the world coordinates
 system, will be projected with a length of \c n pixels on screen.

 Use this method to scale objects so that they have a constant pixel size on screen. The following
 code will draw a 20 pixel line, starting at sceneCenter() and always directed along the screen
 vertical direction:
 \code
 glBegin(GL_LINES);
 glVertex3fv(sceneCenter());
 glVertex3fv(sceneCenter() + 20 * pixelGLRatio(sceneCenter()) * camera()->upVector());
 glEnd();
 \endcode */
qreal Camera::pixelGLRatio(const Vec& position) const
{
	switch (type())
	{
		case Camera::PERSPECTIVE :
			return 2.0 * fabs((frame()->coordinatesOf(position)).z) * tan(fieldOfView()/2.0) / screenHeight();
		case Camera::ORTHOGRAPHIC :
		{
			GLdouble w, h;
			getOrthoWidthHeight(w,h);
			return 2.0 * h / screenHeight();
		}
	}
	// Bad compilers complain
	return 1.0;
}

/*! Changes the Camera fieldOfView() so that the entire scene (defined by QGLViewer::sceneCenter()
 and QGLViewer::sceneRadius()) is visible from the Camera position().

 The position() and orientation() of the Camera are not modified and you first have to orientate the
 Camera in order to actually see the scene (see lookAt(), showEntireScene() or fitSphere()).

 This method is especially useful for \e shadow \e maps computation. Use the Camera positioning
 tools (setPosition(), lookAt()) to position a Camera at the light position. Then use this method to
 define the fieldOfView() so that the shadow map resolution is optimally used:
 \code
 // The light camera needs size hints in order to optimize its fieldOfView
 lightCamera->setSceneRadius(sceneRadius());
 lightCamera->setSceneCenter(sceneCenter());

 // Place the light camera.
 lightCamera->setPosition(lightFrame->position());
 lightCamera->lookAt(sceneCenter());
 lightCamera->setFOVToFitScene();
 \endcode

 See the (soon available) shadowMap contribution example for a practical implementation.

 \attention The fieldOfView() is clamped to M_PI/2.0. This happens when the Camera is at a distance
 lower than sqrt(2.0) * sceneRadius() from the sceneCenter(). It optimizes the shadow map
 resolution, although it may miss some parts of the scene. */
void Camera::setFOVToFitScene()
{
	if (distanceToSceneCenter() > sqrt(2.0)*sceneRadius())
		setFieldOfView(2.0 * asin(sceneRadius() / distanceToSceneCenter()));
	else
		setFieldOfView(M_PI / 2.0);
}

/*! Makes the Camera smoothly zoom on the pointUnderPixel() \p pixel.

 Nothing happens if no pointUnderPixel() is found. Otherwise a KeyFrameInterpolator is created that
 animates the Camera on a one second path that brings the Camera closer to the point under \p pixel.

 See also interpolateToFitScene(). */
void Camera::interpolateToZoomOnPixel(const QPoint& pixel)
{
	const qreal coef = 0.1;

	bool found;
	Vec target = pointUnderPixel(pixel, found);

	if (!found)
		return;

	if (interpolationKfi_->interpolationIsStarted())
		interpolationKfi_->stopInterpolation();

	interpolationKfi_->deletePath();
	interpolationKfi_->addKeyFrame(*(frame()));

	interpolationKfi_->addKeyFrame(Frame(0.3*frame()->position() + 0.7*target, frame()->orientation()), 0.4);

	// Small hack: attach a temporary frame to take advantage of lookAt without modifying frame
	static ManipulatedCameraFrame* tempFrame = new ManipulatedCameraFrame();
	ManipulatedCameraFrame* const originalFrame = frame();
	tempFrame->setPosition(coef*frame()->position() + (1.0-coef)*target);
	tempFrame->setOrientation(frame()->orientation());
	setFrame(tempFrame);
	lookAt(target);
	setFrame(originalFrame);

	interpolationKfi_->addKeyFrame(*(tempFrame), 1.0);

	interpolationKfi_->startInterpolation();
}

/*! Interpolates the Camera on a one second KeyFrameInterpolator path so that the entire scene fits
 the screen at the end.

 The scene is defined by its sceneCenter() and its sceneRadius(). See showEntireScene().

 The orientation() of the Camera is not modified. See also interpolateToZoomOnPixel(). */
void Camera::interpolateToFitScene()
{
	if (interpolationKfi_->interpolationIsStarted())
		interpolationKfi_->stopInterpolation();

	interpolationKfi_->deletePath();
	interpolationKfi_->addKeyFrame(*(frame()));

	// Small hack:  attach a temporary frame to take advantage of lookAt without modifying frame
	static ManipulatedCameraFrame* tempFrame = new ManipulatedCameraFrame();
	ManipulatedCameraFrame* const originalFrame = frame();
	tempFrame->setPosition(frame()->position());
	tempFrame->setOrientation(frame()->orientation());
	setFrame(tempFrame);
	showEntireScene();
	setFrame(originalFrame);

	interpolationKfi_->addKeyFrame(*(tempFrame));

	interpolationKfi_->startInterpolation();
}


/*! Smoothly interpolates the Camera on a KeyFrameInterpolator path so that it goes to \p fr.

  \p fr is expressed in world coordinates. \p duration tunes the interpolation speed (default is
  1 second).

  See also interpolateToFitScene() and interpolateToZoomOnPixel(). */
void Camera::interpolateTo(const Frame& fr, qreal duration)
{
	if (interpolationKfi_->interpolationIsStarted())
		interpolationKfi_->stopInterpolation();

	interpolationKfi_->deletePath();
	interpolationKfi_->addKeyFrame(*(frame()));
	interpolationKfi_->addKeyFrame(fr, duration);

	interpolationKfi_->startInterpolation();
}


/*! Returns the coordinates of the 3D point located at pixel (x,y) on screen.

 Calls a \c glReadPixel to get the pixel depth and applies an unprojectedCoordinatesOf() to the
 result. \p found indicates whether a point was found or not (i.e. background pixel, result's depth
 is zFar() in that case).

 \p x and \p y are expressed in pixel units with an origin in the upper left corner. Use
 screenHeight() - y to convert to OpenGL standard.

 \attention This method assumes that a GL context is available, and that its content was drawn using
 the Camera (i.e. using its projection and modelview matrices). This method hence cannot be used for
 offscreen Camera computations. Use cameraCoordinatesOf() and worldCoordinatesOf() to perform
 similar operations in that case.

 \note The precision of the z-Buffer highly depends on how the zNear() and zFar() values are fitted
 to your scene. Loose boundaries will result in imprecision along the viewing direction. */
Vec Camera::pointUnderPixel(const QPoint& pixel, bool& found) const
{
	float depth;
	// Qt uses upper corner for its origin while GL uses the lower corner.
	glReadPixels(pixel.x(), screenHeight()-1-pixel.y(), 1, 1, GL_DEPTH_COMPONENT, GL_FLOAT, &depth);
	found = depth < 1.0;
	Vec point(pixel.x(), pixel.y(), depth);
	point = unprojectedCoordinatesOf(point);
	return point;
}

/*! Moves the Camera so that the entire scene is visible.

 Simply calls fitSphere() on a sphere defined by sceneCenter() and sceneRadius().

 You will typically use this method in QGLViewer::init() after you defined a new sceneRadius(). */
void Camera::showEntireScene()
{
	fitSphere(sceneCenter(), sceneRadius());
}

/*! Moves the Camera so that its sceneCenter() is projected on the center of the window. The
 orientation() and fieldOfView() are unchanged.

 Simply projects the current position on a line passing through sceneCenter(). See also
 showEntireScene().*/
void Camera::centerScene()
{
	frame()->projectOnLine(sceneCenter(), viewDirection());
}

/*! Sets the Camera orientation(), so that it looks at point \p target (defined in the world
 coordinate system).

 The Camera position() is not modified. Simply setViewDirection().

 See also setUpVector(), setOrientation(), showEntireScene(), fitSphere() and fitBoundingBox(). */
void Camera::lookAt(const Vec& target)
{
	setViewDirection(target - position());
}

/*! Moves the Camera so that the sphere defined by (\p center, \p radius) is visible and fits in the frustum.

 The Camera is simply translated to center the sphere in the screen and make it fit the frustum. Its
 orientation() and its fieldOfView() are unchanged.

 You should therefore orientate the Camera before you call this method. See lookAt(),
 setOrientation() and setUpVector(). */
void Camera::fitSphere(const Vec& center, qreal radius)
{
	qreal distance = 0.0;
	switch (type())
	{
		case Camera::PERSPECTIVE :
		{
			const qreal yview = radius / sin(fieldOfView() / 2.0);
			const qreal xview = radius / sin(horizontalFieldOfView() / 2.0);
			distance = qMax(xview, yview);
			break;
		}
		case Camera::ORTHOGRAPHIC :
		{
			distance = ((center-pivotPoint()) * viewDirection()) + (radius / orthoCoef_);
			break;
		}
	}
	Vec newPos(center - distance * viewDirection());
	frame()->setPositionWithConstraint(newPos);
}

/*! Moves the Camera so that the (world axis aligned) bounding box (\p min, \p max) is entirely
  visible, using fitSphere(). */
void Camera::fitBoundingBox(const Vec& min, const Vec& max)
{
	qreal diameter = qMax(fabs(max[1]-min[1]), fabs(max[0]-min[0]));
	diameter = qMax(fabs(max[2]-min[2]), diameter);
	fitSphere(0.5*(min+max), 0.5*diameter);
}

/*! Moves the Camera so that the rectangular screen region defined by \p rectangle (pixel units,
  with origin in the upper left corner) fits the screen.

  The Camera is translated (its orientation() is unchanged) so that \p rectangle is entirely
  visible. Since the pixel coordinates only define a \e frustum in 3D, it's the intersection of this
  frustum with a plane (orthogonal to the viewDirection() and passing through the sceneCenter())
  that is used to define the 3D rectangle that is eventually fitted. */
void Camera::fitScreenRegion(const QRect& rectangle)
{
	const Vec vd = viewDirection();
	const qreal distToPlane = distanceToSceneCenter();
	const QPoint center = rectangle.center();

	Vec orig, dir;
	convertClickToLine( center, orig, dir );
	Vec newCenter = orig + distToPlane / (dir*vd) * dir;

	convertClickToLine( QPoint(rectangle.x(), center.y()), orig, dir );
	const Vec pointX = orig + distToPlane / (dir*vd) * dir;

	convertClickToLine( QPoint(center.x(), rectangle.y()), orig, dir );
	const Vec pointY = orig + distToPlane / (dir*vd) * dir;

	qreal distance = 0.0;
	switch (type())
	{
		case Camera::PERSPECTIVE :
		{
			const qreal distX = (pointX-newCenter).norm() / sin(horizontalFieldOfView()/2.0);
			const qreal distY = (pointY-newCenter).norm() / sin(fieldOfView()/2.0);
			distance = qMax(distX, distY);
			break;
		}
		case Camera::ORTHOGRAPHIC :
		{
			const qreal dist = ((newCenter-pivotPoint()) * vd);
			//#CONNECTION# getOrthoWidthHeight
			const qreal distX = (pointX-newCenter).norm() / orthoCoef_ / ((aspectRatio() < 1.0) ? 1.0 : aspectRatio());
			const qreal distY = (pointY-newCenter).norm() / orthoCoef_ / ((aspectRatio() < 1.0) ? 1.0/aspectRatio() : 1.0);
			distance = dist + qMax(distX, distY);
			break;
		}
	}

	Vec newPos(newCenter - distance * vd);
	frame()->setPositionWithConstraint(newPos);
}

/*! Rotates the Camera so that its upVector() becomes \p up (defined in the world coordinate
 system).

 The Camera is rotated around an axis orthogonal to \p up and to the current upVector() direction.
 Use this method in order to define the Camera horizontal plane.

 When \p noMove is set to \c false, the orientation modification is compensated by a translation, so
 that the pivotPoint() stays projected at the same position on screen. This is especially
 useful when the Camera is used as an observer of the scene (default mouse binding).

 When \p noMove is \c true (default), the Camera position() is left unchanged, which is an intuitive
 behavior when the Camera is in a walkthrough fly mode (see the QGLViewer::MOVE_FORWARD and
 QGLViewer::MOVE_BACKWARD QGLViewer::MouseAction).

 The frame()'s ManipulatedCameraFrame::sceneUpVector() is set accordingly.

 See also setViewDirection(), lookAt() and setOrientation(). */
void Camera::setUpVector(const Vec& up, bool noMove)
{
	Quaternion q(Vec(0.0, 1.0, 0.0), frame()->transformOf(up));

	if (!noMove)
		frame()->setPosition(pivotPoint() - (frame()->orientation()*q).rotate(frame()->coordinatesOf(pivotPoint())));

	frame()->rotate(q);

	// Useful in fly mode to keep the horizontal direction.
	frame()->updateSceneUpVector();
}

/*! Sets the orientation() of the Camera using polar coordinates.

 \p theta rotates the Camera around its Y axis, and \e then \p phi rotates it around its X axis.
 The polar coordinates are defined in the world coordinates system: \p theta = \p phi = 0 means
 that the Camera is directed towards the world Z axis. Both angles are expressed in radians.

 See also setUpVector(). The position() of the Camera is unchanged, you may want to call showEntireScene()
 after this method to move the Camera.

 This method can be useful to create Quicktime VR panoramic sequences, see the
 QGLViewer::saveSnapshot() documentation for details. */
void Camera::setOrientation(qreal theta, qreal phi)
{
	Vec axis(0.0, 1.0, 0.0);
	const Quaternion rot1(axis, theta);
	axis = Vec(-cos(theta), 0.0, sin(theta));
	const Quaternion rot2(axis, phi);
	setOrientation(rot1 * rot2);
}

/*! Sets the Camera orientation(), defined in the world coordinate system. */
void Camera::setOrientation(const Quaternion& q)
{
	frame()->setOrientation(q);
	frame()->updateSceneUpVector();
}

/*! Rotates the Camera so that its viewDirection() is \p direction (defined in the world coordinate
 system).

 The Camera position() is not modified. The Camera is rotated so that the horizon (defined by its
 upVector()) is preserved. See also lookAt() and setUpVector(). */
void Camera::setViewDirection(const Vec& direction)
{
	if (direction.squaredNorm() < 1E-10)
		return;

	Vec xAxis = direction ^ upVector();
	if (xAxis.squaredNorm() < 1E-10)
	{
		// target is aligned with upVector, this means a rotation around X axis
		// X axis is then unchanged, let's keep it !
		xAxis = frame()->inverseTransformOf(Vec(1.0, 0.0, 0.0));
	}

	Quaternion q;
	q.setFromRotatedBasis(xAxis, xAxis^direction, -direction);
	frame()->setOrientationWithConstraint(q);
}

// Compute a 3 by 3 determinant.
static qreal det(qreal m00,qreal m01,qreal m02,
				 qreal m10,qreal m11,qreal m12,
				 qreal m20,qreal m21,qreal m22)
{
	return m00*m11*m22 + m01*m12*m20 + m02*m10*m21 - m20*m11*m02 - m10*m01*m22 - m00*m21*m12;
}

// Computes the index of element [i][j] in a \c qreal matrix[3][4].
static inline unsigned int ind(unsigned int i, unsigned int j)
{
	return (i*4+j);
}

/*! Returns the Camera position (the eye), defined in the world coordinate system.

Use setPosition() to set the Camera position. Other convenient methods are showEntireScene() or
fitSphere(). Actually returns \c frame()->position().

This position corresponds to the projection center of a Camera::PERSPECTIVE Camera. It is not
located in the image plane, which is at a zNear() distance ahead. */
Vec Camera::position() const { return frame()->position(); }

/*! Returns the normalized up vector of the Camera, defined in the world coordinate system.

Set using setUpVector() or setOrientation(). It is orthogonal to viewDirection() and to
rightVector().

It corresponds to the Y axis of the associated frame() (actually returns
frame()->inverseTransformOf(Vec(0.0, 1.0, 0.0)) ). */
Vec Camera::upVector() const
{
	return frame()->inverseTransformOf(Vec(0.0, 1.0, 0.0));
}
/*! Returns the normalized view direction of the Camera, defined in the world coordinate system.

Change this value using setViewDirection(), lookAt() or setOrientation(). It is orthogonal to
upVector() and to rightVector().

This corresponds to the negative Z axis of the frame() ( frame()->inverseTransformOf(Vec(0.0,
0.0, -1.0)) ). */
Vec Camera::viewDirection() const { return frame()->inverseTransformOf(Vec(0.0, 0.0, -1.0)); }

/*! Returns the normalized right vector of the Camera, defined in the world coordinate system.

This vector lies in the Camera horizontal plane, directed along the X axis (orthogonal to
upVector() and to viewDirection()). Set using setUpVector(), lookAt() or setOrientation().

Simply returns frame()->inverseTransformOf(Vec(1.0, 0.0, 0.0)). */
Vec Camera::rightVector() const
{
	return frame()->inverseTransformOf(Vec(1.0, 0.0, 0.0));
}

/*! Returns the Camera orientation, defined in the world coordinate system.

Actually returns \c frame()->orientation(). Use setOrientation(), setUpVector() or lookAt() to
set the Camera orientation. */
Quaternion Camera::orientation() const { return frame()->orientation(); }

/*! Sets the Camera position() (the eye), defined in the world coordinate system. */
void Camera::setPosition(const Vec& pos) { frame()->setPosition(pos); }

/*! Returns the Camera frame coordinates of a point \p src defined in world coordinates.

worldCoordinatesOf() performs the inverse transformation.

Note that the point coordinates are simply converted in a different coordinate system. They are
not projected on screen. Use projectedCoordinatesOf() for that. */
Vec Camera::cameraCoordinatesOf(const Vec& src) const { return frame()->coordinatesOf(src); }

/*! Returns the world coordinates of the point whose position \p src is defined in the Camera
coordinate system.

cameraCoordinatesOf() performs the inverse transformation. */
Vec Camera::worldCoordinatesOf(const Vec& src) const { return frame()->inverseCoordinatesOf(src); }

/*! Returns the fly speed of the Camera.

Simply returns frame()->flySpeed(). See the ManipulatedCameraFrame::flySpeed() documentation.
This value is only meaningful when the MouseAction bindings is QGLViewer::MOVE_FORWARD or
QGLViewer::MOVE_BACKWARD.

Set to 1% of the sceneRadius() by setSceneRadius(). See also setFlySpeed(). */
qreal Camera::flySpeed() const { return frame()->flySpeed(); }

/*! Sets the Camera flySpeed().

\attention This value is modified by setSceneRadius(). */
void Camera::setFlySpeed(qreal speed) { frame()->setFlySpeed(speed); }

/*! The point the Camera pivots around with the QGLViewer::ROTATE mouse binding. Defined in world coordinate system.

Default value is the sceneCenter().

\attention setSceneCenter() changes this value. */
Vec Camera::pivotPoint() const { return frame()->pivotPoint(); }

/*! Sets the Camera's position() and orientation() from an OpenGL ModelView matrix.

This enables a Camera initialisation from an other OpenGL application. \p modelView is a 16 GLdouble
vector representing a valid OpenGL ModelView matrix, such as one can get using:
\code
GLdouble mvm[16];
glGetDoublev(GL_MODELVIEW_MATRIX, mvm);
myCamera->setFromModelViewMatrix(mvm);
\endcode

After this method has been called, getModelViewMatrix() returns a matrix equivalent to \p
modelView.

Only the orientation() and position() of the Camera are modified.

\note If you defined your matrix as \c GLdouble \c mvm[4][4], pass \c &(mvm[0][0]) as a
parameter. */
void Camera::setFromModelViewMatrix(const GLdouble* const modelViewMatrix)
{
	// Get upper left (rotation) matrix
	qreal upperLeft[3][3];
	for (int i=0; i<3; ++i)
		for (int j=0; j<3; ++j)
			upperLeft[i][j] = modelViewMatrix[i*4+j];

	// Transform upperLeft into the associated Quaternion
	Quaternion q;
	q.setFromRotationMatrix(upperLeft);

	setOrientation(q);
	setPosition(-q.rotate(Vec(modelViewMatrix[12], modelViewMatrix[13], modelViewMatrix[14])));
}

/*! Defines the Camera position(), orientation() and fieldOfView() from a projection matrix.

 \p matrix has to be given in the format used by vision algorithm. It has 3 lines and 4 columns. It
 transforms a point from the world homogeneous coordinate system (4 coordinates: \c sx, \c sy, \c sz
 and \c s) into a point in the screen homogeneous coordinate system (3 coordinates: \c sx, \c sy,
 and \c s, where \c x and \c y are the pixel coordinates on the screen).

 Its three lines correspond to the homogeneous coordinates of the normals to the planes x=0, y=0 and
 z=0, defined in the Camera coordinate system.

 The elements of the matrix are ordered in line major order: you can call \c
 setFromProjectionMatrix(&(matrix[0][0])) if you defined your matrix as a \c qreal \c matrix[3][4].

 \attention Passing the result of getProjectionMatrix() or getModelViewMatrix() to this method is
 not possible (purposefully incompatible matrix dimensions). \p matrix is more likely to be the
 product of these two matrices, without the last line.

 Use setFromModelViewMatrix() to set position() and orientation() from a \c GL_MODELVIEW matrix.
 fieldOfView() can also be retrieved from a \e perspective \c GL_PROJECTION matrix using 2.0 *
 atan(1.0/projectionMatrix[5]).

 This code was written by Sylvain Paris. */
void Camera::setFromProjectionMatrix(const qreal matrix[12])
{
	// The 3 lines of the matrix are the normals to the planes x=0, y=0, z=0
	// in the camera CS. As we normalize them, we do not need the 4th coordinate.
	Vec line_0(matrix[ind(0,0)],matrix[ind(0,1)],matrix[ind(0,2)]);
	Vec line_1(matrix[ind(1,0)],matrix[ind(1,1)],matrix[ind(1,2)]);
	Vec line_2(matrix[ind(2,0)],matrix[ind(2,1)],matrix[ind(2,2)]);

	line_0.normalize();
	line_1.normalize();
	line_2.normalize();

	// The camera position is at (0,0,0) in the camera CS so it is the
	// intersection of the 3 planes. It can be seen as the kernel
	// of the 3x4 projection matrix. We calculate it through 4 dimensional
	// vectorial product. We go directly into 3D that is to say we directly
	// divide the first 3 coordinates by the 4th one.

	// We derive the 4 dimensional vectorial product formula from the
	// computation of a 4x4 determinant that is developped according to
	// its 4th column. This implies some 3x3 determinants.
	const Vec cam_pos = Vec(det(matrix[ind(0,1)],matrix[ind(0,2)],matrix[ind(0,3)],
			matrix[ind(1,1)],matrix[ind(1,2)],matrix[ind(1,3)],
			matrix[ind(2,1)],matrix[ind(2,2)],matrix[ind(2,3)]),

			-det(matrix[ind(0,0)],matrix[ind(0,2)],matrix[ind(0,3)],
			matrix[ind(1,0)],matrix[ind(1,2)],matrix[ind(1,3)],
			matrix[ind(2,0)],matrix[ind(2,2)],matrix[ind(2,3)]),

			det(matrix[ind(0,0)],matrix[ind(0,1)],matrix[ind(0,3)],
			matrix[ind(1,0)],matrix[ind(1,1)],matrix[ind(1,3)],
			matrix[ind(2,0)],matrix[ind(2,1)],matrix[ind(2,3)])) /

			(-det(matrix[ind(0,0)],matrix[ind(0,1)],matrix[ind(0,2)],
			matrix[ind(1,0)],matrix[ind(1,1)],matrix[ind(1,2)],
			matrix[ind(2,0)],matrix[ind(2,1)],matrix[ind(2,2)]));

	// We compute the rotation matrix column by column.

	// GL Z axis is front facing.
	Vec column_2 = -line_2;

	// X-axis is almost like line_0 but should be orthogonal to the Z axis.
	Vec column_0 = ((column_2^line_0)^column_2);
	column_0.normalize();

	// Y-axis is almost like line_1 but should be orthogonal to the Z axis.
	// Moreover line_1 is downward oriented as the screen CS.
	Vec column_1 = -((column_2^line_1)^column_2);
	column_1.normalize();

	qreal rot[3][3];
	rot[0][0] = column_0[0];
	rot[1][0] = column_0[1];
	rot[2][0] = column_0[2];

	rot[0][1] = column_1[0];
	rot[1][1] = column_1[1];
	rot[2][1] = column_1[2];

	rot[0][2] = column_2[0];
	rot[1][2] = column_2[1];
	rot[2][2] = column_2[2];

	// We compute the field of view

	// line_1^column_0 -> vector of intersection line between
	// y_screen=0 and x_camera=0 plane.
	// column_2*(...)  -> cos of the angle between Z vector et y_screen=0 plane
	// * 2 -> field of view = 2 * half angle

	// We need some intermediate values.
	Vec dummy = line_1^column_0;
	dummy.normalize();
	qreal fov = acos(column_2*dummy) * 2.0;

	// We set the camera.
	Quaternion q;
	q.setFromRotationMatrix(rot);
	setOrientation(q);
	setPosition(cam_pos);
	setFieldOfView(fov);
}


/*
	// persp : projectionMatrix_[0]  = f/aspectRatio();
void Camera::setFromProjectionMatrix(const GLdouble* projectionMatrix)
{
  QString message;
  if ((fabs(projectionMatrix[1]) > 1E-3) ||
	  (fabs(projectionMatrix[2]) > 1E-3) ||
	  (fabs(projectionMatrix[3]) > 1E-3) ||
	  (fabs(projectionMatrix[4]) > 1E-3) ||
	  (fabs(projectionMatrix[6]) > 1E-3) ||
	  (fabs(projectionMatrix[7]) > 1E-3) ||
	  (fabs(projectionMatrix[8]) > 1E-3) ||
	  (fabs(projectionMatrix[9]) > 1E-3))
	message = "Non null coefficient in projection matrix - Aborting";
  else
	if ((fabs(projectionMatrix[11]+1.0) < 1E-5) && (fabs(projectionMatrix[15]) < 1E-5))
	  {
	if (projectionMatrix[5] < 1E-4)
	  message="Negative field of view in Camera::setFromProjectionMatrix";
	else
	  setType(Camera::PERSPECTIVE);
	  }
	else
	  if ((fabs(projectionMatrix[11]) < 1E-5) && (fabs(projectionMatrix[15]-1.0) < 1E-5))
	setType(Camera::ORTHOGRAPHIC);
	  else
	message = "Unable to determine camera type in setFromProjectionMatrix - Aborting";

  if (!message.isEmpty())
	{
	  qWarning(message);
	  return;
	}

  switch (type())
	{
	case Camera::PERSPECTIVE:
	  {
	setFieldOfView(2.0 * atan(1.0/projectionMatrix[5]));
	const qreal far = projectionMatrix[14] / (2.0 * (1.0 + projectionMatrix[10]));
	const qreal near = (projectionMatrix[10]+1.0) / (projectionMatrix[10]-1.0) * far;
	setSceneRadius((far-near)/2.0);
	setSceneCenter(position() + (near + sceneRadius())*viewDirection());
	break;
	  }
	case Camera::ORTHOGRAPHIC:
	  {
	GLdouble w, h;
	getOrthoWidthHeight(w,h);
	projectionMatrix_[0]  = 1.0/w;
	projectionMatrix_[5]  = 1.0/h;
	projectionMatrix_[10] = -2.0/(ZFar - ZNear);
	projectionMatrix_[11] = 0.0;
	projectionMatrix_[14] = -(ZFar + ZNear)/(ZFar - ZNear);
	projectionMatrix_[15] = 1.0;
	// same as glOrtho( -w, w, -h, h, zNear(), zFar() );
	break;
	  }
	}
}
*/

///////////////////////// Camera to world transform ///////////////////////

/*! Same as cameraCoordinatesOf(), but with \c qreal[3] parameters (\p src and \p res may be identical pointers). */
void Camera::getCameraCoordinatesOf(const qreal src[3], qreal res[3]) const
{
	Vec r = cameraCoordinatesOf(Vec(src));
	for (int i=0; i<3; ++i)
		res[i] = r[i];
}

/*! Same as worldCoordinatesOf(), but with \c qreal[3] parameters (\p src and \p res may be identical pointers). */
void Camera::getWorldCoordinatesOf(const qreal src[3], qreal res[3]) const
{
	Vec r = worldCoordinatesOf(Vec(src));
	for (int i=0; i<3; ++i)
		res[i] = r[i];
}

/*! Fills \p viewport with the Camera OpenGL viewport.

This method is mainly used in conjunction with \c gluProject, which requires such a viewport.
Returned values are (0, screenHeight(), screenWidth(), - screenHeight()), so that the origin is
located in the \e upper left corner of the window (Qt style coordinate system). */
void Camera::getViewport(GLint viewport[4]) const
{
	viewport[0] = 0;
	viewport[1] = screenHeight();
	viewport[2] = screenWidth();
	viewport[3] = -screenHeight();
}

/*! Returns the screen projected coordinates of a point \p src defined in the \p frame coordinate
 system.

 When \p frame in \c NULL (default), \p src is expressed in the world coordinate system.

 The x and y coordinates of the returned Vec are expressed in pixel, (0,0) being the \e upper left
 corner of the window. The z coordinate ranges between 0.0 (near plane) and 1.0 (excluded, far
 plane). See the \c gluProject man page for details.

 unprojectedCoordinatesOf() performs the inverse transformation.

 See the <a href="../examples/screenCoordSystem.html">screenCoordSystem example</a>.

 This method only uses the intrinsic Camera parameters (see getModelViewMatrix(),
 getProjectionMatrix() and getViewport()) and is completely independent of the OpenGL \c
 GL_MODELVIEW, \c GL_PROJECTION and viewport matrices. You can hence define a virtual Camera and use
 this method to compute projections out of a classical rendering context.

 \attention However, if your Camera is not attached to a QGLViewer (used for offscreen computations
 for instance), make sure the Camera matrices are updated before calling this method. Call
 computeModelViewMatrix() and computeProjectionMatrix() to do so.

 If you call this method several times with no change in the matrices, consider precomputing the
 projection times modelview matrix to save computation time if required (\c P x \c M in the \c
 gluProject man page).

 Here is the code corresponding to what this method does (kindly submitted by Robert W. Kuhn) :
 \code
 Vec project(Vec point)
 {
	GLint    Viewport[4];
	GLdouble Projection[16], Modelview[16];
	GLdouble matrix[16];

	// Precomputation begin
	glGetIntegerv(GL_VIEWPORT         , Viewport);
	glGetDoublev (GL_MODELVIEW_MATRIX , Modelview);
	glGetDoublev (GL_PROJECTION_MATRIX, Projection);

	for (unsigned short m=0; m<4; ++m)
	{
		for (unsigned short l=0; l<4; ++l)
		{
			qreal sum = 0.0;
			for (unsigned short k=0; k<4; ++k)
				sum += Projection[l+4*k]*Modelview[k+4*m];
			matrix[l+4*m] = sum;
		}
	}
	// Precomputation end

	GLdouble v[4], vs[4];
	v[0]=point[0]; v[1]=point[1]; v[2]=point[2]; v[3]=1.0;

	vs[0]=matrix[0 ]*v[0] + matrix[4 ]*v[1] + matrix[8 ]*v[2] + matrix[12 ]*v[3];
	vs[1]=matrix[1 ]*v[0] + matrix[5 ]*v[1] + matrix[9 ]*v[2] + matrix[13 ]*v[3];
	vs[2]=matrix[2 ]*v[0] + matrix[6 ]*v[1] + matrix[10]*v[2] + matrix[14 ]*v[3];
	vs[3]=matrix[3 ]*v[0] + matrix[7 ]*v[1] + matrix[11]*v[2] + matrix[15 ]*v[3];

	vs[0] /= vs[3];
	vs[1] /= vs[3];
	vs[2] /= vs[3];

	vs[0] = vs[0] * 0.5 + 0.5;
	vs[1] = vs[1] * 0.5 + 0.5;
	vs[2] = vs[2] * 0.5 + 0.5;

	vs[0] = vs[0] * Viewport[2] + Viewport[0];
	vs[1] = vs[1] * Viewport[3] + Viewport[1];

	return Vec(vs[0], Viewport[3]-vs[1], vs[2]);
  }
 \endcode
 */
Vec Camera::projectedCoordinatesOf(const Vec& src, const Frame* frame) const
{
	GLdouble x,y,z;
	static GLint viewport[4];
	getViewport(viewport);

	if (frame)
	{
		const Vec tmp = frame->inverseCoordinatesOf(src);
		gluProject(tmp.x,tmp.y,tmp.z, modelViewMatrix_, projectionMatrix_, viewport,  &x,&y,&z);
	}
	else
		gluProject(src.x,src.y,src.z, modelViewMatrix_, projectionMatrix_, viewport,  &x,&y,&z);

	return Vec(x,y,z);
}

/*! Returns the world unprojected coordinates of a point \p src defined in the screen coordinate
 system.

 The \p src.x and \p src.y input values are expressed in pixels, (0,0) being the \e upper left corner
 of the window. \p src.z is a depth value ranging in [0..1[ (respectively corresponding to the near
 and far planes). Note that src.z is \e not a linear interpolation between zNear and zFar.
 /code
 src.z = zFar() / (zFar() - zNear()) * (1.0 - zNear() / z);
 /endcode
 Where z is the distance from the point you project to the camera, along the viewDirection().
 See the \c gluUnProject man page for details.

 The result is expressed in the \p frame coordinate system. When \p frame is \c NULL (default), the
 result is expressed in the world coordinates system. The possible \p frame Frame::referenceFrame()
 are taken into account.

 projectedCoordinatesOf() performs the inverse transformation.

 This method only uses the intrinsic Camera parameters (see getModelViewMatrix(),
 getProjectionMatrix() and getViewport()) and is completely independent of the OpenGL \c
 GL_MODELVIEW, \c GL_PROJECTION and viewport matrices. You can hence define a virtual Camera and use
 this method to compute un-projections out of a classical rendering context.

 \attention However, if your Camera is not attached to a QGLViewer (used for offscreen computations
 for instance), make sure the Camera matrices are updated before calling this method (use
 computeModelViewMatrix(), computeProjectionMatrix()). See also setScreenWidthAndHeight().

 This method is not computationally optimized. If you call it several times with no change in the
 matrices, you should buffer the entire inverse projection matrix (modelview, projection and then
 viewport) to speed-up the queries. See the \c gluUnProject man page for details. */
Vec Camera::unprojectedCoordinatesOf(const Vec& src, const Frame* frame) const
{
	GLdouble x,y,z;
	static GLint viewport[4];
	getViewport(viewport);
	gluUnProject(src.x,src.y,src.z, modelViewMatrix_,  projectionMatrix_,  viewport,  &x,&y,&z);
	if (frame)
		return frame->coordinatesOf(Vec(x,y,z));
	else
		return Vec(x,y,z);
}

/*! Same as projectedCoordinatesOf(), but with \c qreal parameters (\p src and \p res can be identical pointers). */
void Camera::getProjectedCoordinatesOf(const qreal src[3], qreal res[3], const Frame* frame) const
{
	Vec r = projectedCoordinatesOf(Vec(src), frame);
	for (int i=0; i<3; ++i)
		res[i] = r[i];
}

/*! Same as unprojectedCoordinatesOf(), but with \c qreal parameters (\p src and \p res can be identical pointers). */
void Camera::getUnprojectedCoordinatesOf(const qreal src[3], qreal res[3], const Frame* frame) const
{
	Vec r = unprojectedCoordinatesOf(Vec(src), frame);
	for (int i=0; i<3; ++i)
		res[i] = r[i];
}

/////////////////////////////////////  KFI /////////////////////////////////////////

/*! Returns the KeyFrameInterpolator that defines the Camera path number \p i.

If path \p i is not defined for this index, the method returns a \c NULL pointer. */
KeyFrameInterpolator* Camera::keyFrameInterpolator(unsigned int i) const
{
	if (kfi_.contains(i))
		return kfi_[i];
	else
		return NULL;
}

/*! Sets the KeyFrameInterpolator that defines the Camera path of index \p i.

 The previous keyFrameInterpolator() is lost and should be deleted by the calling method if
 needed.

 The KeyFrameInterpolator::interpolated() signal of \p kfi probably needs to be connected to the
 Camera's associated QGLViewer::update() slot, so that when the Camera position is interpolated
 using \p kfi, every interpolation step updates the display:
 \code
 myViewer.camera()->deletePath(3);
 myViewer.camera()->setKeyFrameInterpolator(3, myKeyFrameInterpolator);
 connect(myKeyFrameInterpolator, SIGNAL(interpolated()), myViewer, SLOT(update());
 \endcode

 \note These connections are done automatically when a Camera is attached to a QGLViewer, or when a
 new KeyFrameInterpolator is defined using the QGLViewer::addKeyFrameKeyboardModifiers() and
 QGLViewer::pathKey() (default is Alt+F[1-12]). See the <a href="../keyboard.html">keyboard page</a>
 for details. */
void Camera::setKeyFrameInterpolator(unsigned int i, KeyFrameInterpolator* const kfi)
{
	if (kfi)
		kfi_[i] = kfi;
	else
		kfi_.remove(i);
}

/*! Adds the current Camera position() and orientation() as a keyFrame to the path number \p i.

This method can also be used if you simply want to save a Camera point of view (a path made of a
single keyFrame). Use playPath() to make the Camera play the keyFrame path (resp. restore
the point of view). Use deletePath() to clear the path.

The default keyboard shortcut for this method is Alt+F[1-12]. Set QGLViewer::pathKey() and
QGLViewer::addKeyFrameKeyboardModifiers().

If you use directly this method and the keyFrameInterpolator(i) does not exist, a new one is
created. Its KeyFrameInterpolator::interpolated() signal should then be connected to the
QGLViewer::update() slot (see setKeyFrameInterpolator()). */
void Camera::addKeyFrameToPath(unsigned int i)
{
	if (!kfi_.contains(i))
		setKeyFrameInterpolator(i, new KeyFrameInterpolator(frame()));

	kfi_[i]->addKeyFrame(*(frame()));
}

/*! Makes the Camera follow the path of keyFrameInterpolator() number \p i.

 If the interpolation is started, it stops it instead.

 This method silently ignores undefined (empty) paths (see keyFrameInterpolator()).

 The default keyboard shortcut for this method is F[1-12]. Set QGLViewer::pathKey() and
 QGLViewer::playPathKeyboardModifiers(). */
void Camera::playPath(unsigned int i)
{
	if (kfi_.contains(i)) {
		if (kfi_[i]->interpolationIsStarted())
			kfi_[i]->stopInterpolation();
		else
			kfi_[i]->startInterpolation();
	}
}

/*! Resets the path of the keyFrameInterpolator() number \p i.

If this path is \e not being played (see playPath() and
KeyFrameInterpolator::interpolationIsStarted()), resets it to its starting position (see
KeyFrameInterpolator::resetInterpolation()). If the path is played, simply stops interpolation. */
void Camera::resetPath(unsigned int i)
{
	if (kfi_.contains(i)) {
		if ((kfi_[i]->interpolationIsStarted()))
			kfi_[i]->stopInterpolation();
		else
		{
			kfi_[i]->resetInterpolation();
			kfi_[i]->interpolateAtTime(kfi_[i]->interpolationTime());
		}
	}
}

/*! Deletes the keyFrameInterpolator() of index \p i.

Disconnect the keyFrameInterpolator() KeyFrameInterpolator::interpolated() signal before deleting the
keyFrameInterpolator() if needed:
\code
disconnect(camera()->keyFrameInterpolator(i), SIGNAL(interpolated()), this, SLOT(update()));
camera()->deletePath(i);
\endcode */
void Camera::deletePath(unsigned int i)
{
	if (kfi_.contains(i))
	{
		kfi_[i]->stopInterpolation();
		delete kfi_[i];
		kfi_.remove(i);
	}
}

/*! Draws all the Camera paths defined by the keyFrameInterpolator().

 Simply calls KeyFrameInterpolator::drawPath() for all the defined paths. The path color is the
 current \c glColor().

 \attention The OpenGL state is modified by this method: see KeyFrameInterpolator::drawPath(). */
void Camera::drawAllPaths()
{
	for (QMap<unsigned int, KeyFrameInterpolator*>::ConstIterator it = kfi_.begin(), end=kfi_.end(); it != end; ++it)
		(it.value())->drawPath(3, 5, sceneRadius());
}

////////////////////////////////////////////////////////////////////////////////

/*! Returns an XML \c QDomElement that represents the Camera.

 \p name is the name of the QDomElement tag. \p doc is the \c QDomDocument factory used to create
 QDomElement.

 Concatenates the Camera parameters, the ManipulatedCameraFrame::domElement() and the paths'
 KeyFrameInterpolator::domElement().

 Use initFromDOMElement() to restore the Camera state from the resulting \c QDomElement.

 If you want to save the Camera state in a file, use:
 \code
  QDomDocument document("myCamera");
  doc.appendChild( myCamera->domElement("Camera", document) );

  QFile f("myCamera.xml");
  if (f.open(IO_WriteOnly))
	{
	  QTextStream out(&f);
	  document.save(out, 2);
	}
 \endcode

 Note that the QGLViewer::camera() is automatically saved by QGLViewer::saveStateToFile() when a
 QGLViewer is closed. Use QGLViewer::restoreStateFromFile() to restore it back. */
QDomElement Camera::domElement(const QString& name, QDomDocument& document) const
{
	QDomElement de = document.createElement(name);
	QDomElement paramNode = document.createElement("Parameters");
	paramNode.setAttribute("fieldOfView", QString::number(fieldOfView()));
	paramNode.setAttribute("zNearCoefficient", QString::number(zNearCoefficient()));
	paramNode.setAttribute("zClippingCoefficient", QString::number(zClippingCoefficient()));
	paramNode.setAttribute("orthoCoef", QString::number(orthoCoef_));
	paramNode.setAttribute("sceneRadius", QString::number(sceneRadius()));
	paramNode.appendChild(sceneCenter().domElement("SceneCenter", document));

	switch (type())
	{
		case Camera::PERSPECTIVE  :	paramNode.setAttribute("Type", "PERSPECTIVE"); break;
		case Camera::ORTHOGRAPHIC :	paramNode.setAttribute("Type", "ORTHOGRAPHIC"); break;
	}
	de.appendChild(paramNode);

	QDomElement stereoNode = document.createElement("Stereo");
	stereoNode.setAttribute("IODist", QString::number(IODistance()));
	stereoNode.setAttribute("focusDistance", QString::number(focusDistance()));
	stereoNode.setAttribute("physScreenWidth", QString::number(physicalScreenWidth()));
	de.appendChild(stereoNode);

	de.appendChild(frame()->domElement("ManipulatedCameraFrame", document));

	// KeyFrame paths
	for (QMap<unsigned int, KeyFrameInterpolator*>::ConstIterator it = kfi_.begin(), end=kfi_.end(); it != end; ++it)
	{
		QDomElement kfNode = (it.value())->domElement("KeyFrameInterpolator", document);
		kfNode.setAttribute("index", QString::number(it.key()));
		de.appendChild(kfNode);
	}

	return de;
}

/*! Restores the Camera state from a \c QDomElement created by domElement().

 Use the following code to retrieve a Camera state from a file created using domElement():
 \code
 // Load DOM from file
 QDomDocument document;
 QFile f("myCamera.xml");
 if (f.open(IO_ReadOnly))
 {
   document.setContent(&f);
   f.close();
 }

 // Parse the DOM tree
 QDomElement main = document.documentElement();
 myCamera->initFromDOMElement(main);
 \endcode

 The frame() pointer is not modified by this method. The frame() state is however modified.

 \attention The original keyFrameInterpolator() are deleted and should be copied first if they are shared. */
void Camera::initFromDOMElement(const QDomElement& element)
{
	QDomElement child=element.firstChild().toElement();

	QMutableMapIterator<unsigned int, KeyFrameInterpolator*> it(kfi_);
	while (it.hasNext()) {
		it.next();
		deletePath(it.key());
	}

	while (!child.isNull())
	{
		if (child.tagName() == "Parameters")
		{
			// #CONNECTION# Default values set in constructor
			setFieldOfView(DomUtils::qrealFromDom(child, "fieldOfView", M_PI/4.0));
			setZNearCoefficient(DomUtils::qrealFromDom(child, "zNearCoefficient", 0.005));
			setZClippingCoefficient(DomUtils::qrealFromDom(child, "zClippingCoefficient", sqrt(3.0)));
			orthoCoef_ = DomUtils::qrealFromDom(child, "orthoCoef", tan(fieldOfView()/2.0));
			setSceneRadius(DomUtils::qrealFromDom(child, "sceneRadius", sceneRadius()));

			setType(PERSPECTIVE);
			QString type = child.attribute("Type", "PERSPECTIVE");
			if (type == "PERSPECTIVE")  setType(Camera::PERSPECTIVE);
			if (type == "ORTHOGRAPHIC") setType(Camera::ORTHOGRAPHIC);

			QDomElement child2=child.firstChild().toElement();
			while (!child2.isNull())
			{
				/* Although the scene does not change when a camera is loaded, restore the saved center and radius values.
		   Mainly useful when a the viewer is restored on startup, with possible additional cameras. */
				if (child2.tagName() == "SceneCenter")
					setSceneCenter(Vec(child2));

				child2 = child2.nextSibling().toElement();
			}
		}

		if (child.tagName() == "ManipulatedCameraFrame")
			frame()->initFromDOMElement(child);

		if (child.tagName() == "Stereo")
		{
			setIODistance(DomUtils::qrealFromDom(child, "IODist", 0.062));
			setFocusDistance(DomUtils::qrealFromDom(child, "focusDistance", focusDistance()));
			setPhysicalScreenWidth(DomUtils::qrealFromDom(child, "physScreenWidth", 0.5));
		}

		if (child.tagName() == "KeyFrameInterpolator")
		{
			unsigned int index = DomUtils::uintFromDom(child, "index", 0);
			setKeyFrameInterpolator(index, new KeyFrameInterpolator(frame()));
			if (keyFrameInterpolator(index))
				keyFrameInterpolator(index)->initFromDOMElement(child);
		}

		child = child.nextSibling().toElement();
	}
}

/*! Gives the coefficients of a 3D half-line passing through the Camera eye and pixel (x,y).

 The origin of the half line (eye position) is stored in \p orig, while \p dir contains the properly
 oriented and normalized direction of the half line.

 \p x and \p y are expressed in Qt format (origin in the upper left corner). Use screenHeight() - y
 to convert to OpenGL units.

 This method is useful for analytical intersection in a selection method.

 See the <a href="../examples/select.html">select example</a> for an illustration. */
void Camera::convertClickToLine(const QPoint& pixel, Vec& orig, Vec& dir) const
{
	switch (type())
	{
		case Camera::PERSPECTIVE:
			orig = position();
			dir = Vec( ((2.0 * pixel.x() / screenWidth()) - 1.0) * tan(fieldOfView()/2.0) * aspectRatio(),
					   ((2.0 * (screenHeight()-pixel.y()) / screenHeight()) - 1.0) * tan(fieldOfView()/2.0),
					   -1.0 );
			dir = worldCoordinatesOf(dir) - orig;
			dir.normalize();
			break;

		case Camera::ORTHOGRAPHIC:
		{
			GLdouble w,h;
			getOrthoWidthHeight(w,h);
			orig = Vec((2.0 * pixel.x() / screenWidth() - 1.0)*w, -(2.0 * pixel.y() / screenHeight() - 1.0)*h, 0.0);
			orig = worldCoordinatesOf(orig);
			dir = viewDirection();
			break;
		}
	}
}

#ifndef DOXYGEN
/*! This method has been deprecated in libQGLViewer version 2.2.0 */
void Camera::drawCamera(qreal, qreal, qreal)
{
	qWarning("drawCamera is deprecated. Use Camera::draw() instead.");
}
#endif

/*! Draws a representation of the Camera in the 3D world.

The near and far planes are drawn as quads, the frustum is drawn using lines and the camera up
vector is represented by an arrow to disambiguate the drawing. See the
<a href="../examples/standardCamera.html">standardCamera example</a> for an illustration.

Note that the current \c glColor and \c glPolygonMode are used to draw the near and far planes. See
the <a href="../examples/frustumCulling.html">frustumCulling example</a> for an example of
semi-transparent plane drawing. Similarly, the current \c glLineWidth and \c glColor is used to draw
the frustum outline.

When \p drawFarPlane is \c false, only the near plane is drawn. \p scale can be used to scale the
drawing: a value of 1.0 (default) will draw the Camera's frustum at its actual size.

This method assumes that the \c glMatrixMode is \c GL_MODELVIEW and that the current ModelView
matrix corresponds to the world coordinate system (as it is at the beginning of QGLViewer::draw()).
The Camera is then correctly positioned and orientated.

\note The drawing of a QGLViewer's own QGLViewer::camera() should not be visible, but may create
artefacts due to numerical imprecisions. */
void Camera::draw(bool drawFarPlane, qreal scale) const
{
	glPushMatrix();
	glMultMatrixd(frame()->worldMatrix());

	// 0 is the upper left coordinates of the near corner, 1 for the far one
	Vec points[2];

	points[0].z = scale * zNear();
	points[1].z = scale * zFar();

	switch (type())
	{
		case Camera::PERSPECTIVE:
		{
			points[0].y = points[0].z * tan(fieldOfView()/2.0);
			points[0].x = points[0].y * aspectRatio();

			const qreal ratio = points[1].z / points[0].z;

			points[1].y = ratio * points[0].y;
			points[1].x = ratio * points[0].x;
			break;
		}
		case Camera::ORTHOGRAPHIC:
		{
			GLdouble hw, hh;
			getOrthoWidthHeight(hw, hh);
			points[0].x = points[1].x = scale * qreal(hw);
			points[0].y = points[1].y = scale * qreal(hh);
			break;
		}
	}

	const int farIndex = drawFarPlane?1:0;

	// Near and (optionally) far plane(s)
	glBegin(GL_QUADS);
	for (int i=farIndex; i>=0; --i)
	{
		glNormal3d(0.0f, 0.0f, (i==0)?1.0f:-1.0f);
		glVertex3d( points[i].x,  points[i].y, -points[i].z);
		glVertex3d(-points[i].x,  points[i].y, -points[i].z);
		glVertex3d(-points[i].x, -points[i].y, -points[i].z);
		glVertex3d( points[i].x, -points[i].y, -points[i].z);
	}
	glEnd();

	// Up arrow
	const qreal arrowHeight    = 1.5 * points[0].y;
	const qreal baseHeight     = 1.2 * points[0].y;
	const qreal arrowHalfWidth = 0.5 * points[0].x;
	const qreal baseHalfWidth  = 0.3 * points[0].x;

	glPolygonMode(GL_FRONT_AND_BACK, GL_FILL);
	// Base
	glBegin(GL_QUADS);
	glVertex3d(-baseHalfWidth, points[0].y, -points[0].z);
	glVertex3d( baseHalfWidth, points[0].y, -points[0].z);
	glVertex3d( baseHalfWidth, baseHeight,  -points[0].z);
	glVertex3d(-baseHalfWidth, baseHeight,  -points[0].z);
	glEnd();

	// Arrow
	glBegin(GL_TRIANGLES);
	glVertex3d( 0.0,           arrowHeight, -points[0].z);
	glVertex3d(-arrowHalfWidth, baseHeight,  -points[0].z);
	glVertex3d( arrowHalfWidth, baseHeight,  -points[0].z);
	glEnd();

	// Frustum lines
	switch (type())
	{
		case Camera::PERSPECTIVE :
			glBegin(GL_LINES);
			glVertex3d(0.0, 0.0, 0.0);
			glVertex3d( points[farIndex].x,  points[farIndex].y, -points[farIndex].z);
			glVertex3d(0.0, 0.0, 0.0);
			glVertex3d(-points[farIndex].x,  points[farIndex].y, -points[farIndex].z);
			glVertex3d(0.0, 0.0, 0.0);
			glVertex3d(-points[farIndex].x, -points[farIndex].y, -points[farIndex].z);
			glVertex3d(0.0, 0.0, 0.0);
			glVertex3d( points[farIndex].x, -points[farIndex].y, -points[farIndex].z);
			glEnd();
			break;
		case Camera::ORTHOGRAPHIC :
			if (drawFarPlane)
			{
				glBegin(GL_LINES);
				glVertex3d( points[0].x,  points[0].y, -points[0].z);
				glVertex3d( points[1].x,  points[1].y, -points[1].z);
				glVertex3d(-points[0].x,  points[0].y, -points[0].z);
				glVertex3d(-points[1].x,  points[1].y, -points[1].z);
				glVertex3d(-points[0].x, -points[0].y, -points[0].z);
				glVertex3d(-points[1].x, -points[1].y, -points[1].z);
				glVertex3d( points[0].x, -points[0].y, -points[0].z);
				glVertex3d( points[1].x, -points[1].y, -points[1].z);
				glEnd();
			}
	}

	glPopMatrix();
}


/*! Returns the 6 plane equations of the Camera frustum.

The six 4-component vectors of \p coef respectively correspond to the left, right, near, far, top
and bottom Camera frustum planes. Each vector holds a plane equation of the form:
\code
a*x + b*y + c*z + d = 0
\endcode
where \c a, \c b, \c c and \c d are the 4 components of each vector, in that order.

See the <a href="../examples/frustumCulling.html">frustumCulling example</a> for an application.

This format is compatible with the \c glClipPlane() function. One camera frustum plane can hence be
applied in an other viewer to visualize the culling results:
\code
 // Retrieve plane equations
 GLdouble coef[6][4];
 mainViewer->camera()->getFrustumPlanesCoefficients(coef);

 // These two additional clipping planes (which must have been enabled)
 // will reproduce the mainViewer's near and far clipping.
 glClipPlane(GL_CLIP_PLANE0, coef[2]);
 glClipPlane(GL_CLIP_PLANE1, coef[3]);
\endcode */
void Camera::getFrustumPlanesCoefficients(GLdouble coef[6][4]) const
{
	// Computed once and for all
	const Vec pos          = position();
	const Vec viewDir      = viewDirection();
	const Vec up           = upVector();
	const Vec right        = rightVector();
	const qreal posViewDir = pos * viewDir;

	static Vec normal[6];
	static GLdouble dist[6];

	switch (type())
	{
		case Camera::PERSPECTIVE :
		{
			const qreal hhfov = horizontalFieldOfView() / 2.0;
			const qreal chhfov = cos(hhfov);
			const qreal shhfov = sin(hhfov);
			normal[0] = - shhfov * viewDir;
			normal[1] = normal[0] + chhfov * right;
			normal[0] = normal[0] - chhfov * right;

			normal[2] = -viewDir;
			normal[3] =  viewDir;

			const qreal hfov = fieldOfView() / 2.0;
			const qreal chfov = cos(hfov);
			const qreal shfov = sin(hfov);
			normal[4] = - shfov * viewDir;
			normal[5] = normal[4] - chfov * up;
			normal[4] = normal[4] + chfov * up;

			for (int i=0; i<2; ++i)
				dist[i] = pos * normal[i];
			for (int j=4; j<6; ++j)
				dist[j] = pos * normal[j];

			// Natural equations are:
			// dist[0,1,4,5] = pos * normal[0,1,4,5];
			// dist[2] = (pos + zNear() * viewDir) * normal[2];
			// dist[3] = (pos + zFar()  * viewDir) * normal[3];

			// 2 times less computations using expanded/merged equations. Dir vectors are normalized.
			const qreal posRightCosHH = chhfov * pos * right;
			dist[0] = -shhfov * posViewDir;
			dist[1] = dist[0] + posRightCosHH;
			dist[0] = dist[0] - posRightCosHH;
			const qreal posUpCosH = chfov * pos * up;
			dist[4] = - shfov * posViewDir;
			dist[5] = dist[4] - posUpCosH;
			dist[4] = dist[4] + posUpCosH;

			break;
		}
		case Camera::ORTHOGRAPHIC :
			normal[0] = -right;
			normal[1] =  right;
			normal[4] =  up;
			normal[5] = -up;

			GLdouble hw, hh;
			getOrthoWidthHeight(hw, hh);
			dist[0] = (pos - hw * right) * normal[0];
			dist[1] = (pos + hw * right) * normal[1];
			dist[4] = (pos + hh * up) * normal[4];
			dist[5] = (pos - hh * up) * normal[5];
			break;
	}

	// Front and far planes are identical for both camera types.
	normal[2] = -viewDir;
	normal[3] =  viewDir;
	dist[2] = -posViewDir - zNear();
	dist[3] =  posViewDir + zFar();

	for (int i=0; i<6; ++i)
	{
		coef[i][0] = GLdouble(normal[i].x);
		coef[i][1] = GLdouble(normal[i].y);
		coef[i][2] = GLdouble(normal[i].z);
		coef[i][3] = dist[i];
	}
}

void Camera::onFrameModified() {
	projectionMatrixIsUpToDate_ = false;
	modelViewMatrixIsUpToDate_ = false;
}