/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*************************************************************************
 *
 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 *
 * Copyright 2000, 2010 Oracle and/or its affiliates.
 *
 * OpenOffice.org - a multi-platform office productivity suite
 *
 * This file is part of OpenOffice.org.
 *
 * OpenOffice.org is free software: you can redistribute it and/or modify
 * it under the terms of the GNU Lesser General Public License version 3
 * only, as published by the Free Software Foundation.
 *
 * OpenOffice.org is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU Lesser General Public License version 3 for more details
 * (a copy is included in the LICENSE file that accompanied this code).
 *
 * You should have received a copy of the GNU Lesser General Public License
 * version 3 along with OpenOffice.org.  If not, see
 * <http://www.openoffice.org/license.html>
 * for a copy of the LGPLv3 License.
 *
 ************************************************************************/

#include <cstdio>
#include <osl/diagnose.h>
#include <basegfx/polygon/b2dlinegeometry.hxx>
#include <basegfx/point/b2dpoint.hxx>
#include <basegfx/vector/b2dvector.hxx>
#include <basegfx/polygon/b2dpolygontools.hxx>
#include <basegfx/polygon/b2dpolypolygontools.hxx>
#include <basegfx/range/b2drange.hxx>
#include <basegfx/matrix/b2dhommatrix.hxx>
#include <basegfx/curve/b2dcubicbezier.hxx>
#include <basegfx/matrix/b2dhommatrixtools.hxx>

//////////////////////////////////////////////////////////////////////////////

namespace basegfx
{
    namespace tools
    {
        B2DPolyPolygon createAreaGeometryForLineStartEnd(
            const B2DPolygon& rCandidate,
            const B2DPolyPolygon& rArrow,
            bool bStart,
            double fWidth,
            double fCandidateLength,
            double fDockingPosition, // 0->top, 1->bottom
            double* pConsumedLength)
        {
            B2DPolyPolygon aRetval;
            OSL_ENSURE(rCandidate.count() > 1L, "createAreaGeometryForLineStartEnd: Line polygon has too less points (!)");
            OSL_ENSURE(rArrow.count() > 0L, "createAreaGeometryForLineStartEnd: Empty arrow PolyPolygon (!)");
            OSL_ENSURE(fWidth > 0.0, "createAreaGeometryForLineStartEnd: Width too small (!)");
            OSL_ENSURE(fDockingPosition >= 0.0 && fDockingPosition <= 1.0,
                "createAreaGeometryForLineStartEnd: fDockingPosition out of range [0.0 .. 1.0] (!)");

            if(fWidth < 0.0)
            {
                fWidth = -fWidth;
            }

            if(rCandidate.count() > 1 && rArrow.count() && !fTools::equalZero(fWidth))
            {
                if(fDockingPosition < 0.0)
                {
                    fDockingPosition = 0.0;
                }
                else if(fDockingPosition > 1.0)
                {
                    fDockingPosition = 1.0;
                }

                // init return value from arrow
                aRetval.append(rArrow);

                // get size of the arrow
                const B2DRange aArrowSize(getRange(rArrow));

                // build ArrowTransform; center in X, align with axis in Y
                B2DHomMatrix aArrowTransform(basegfx::tools::createTranslateB2DHomMatrix(
                    -aArrowSize.getCenter().getX(), -aArrowSize.getMinimum().getY()));

                // scale to target size
                const double fArrowScale(fWidth / (aArrowSize.getRange().getX()));
                aArrowTransform.scale(fArrowScale, fArrowScale);

                // get arrow size in Y
                B2DPoint aUpperCenter(aArrowSize.getCenter().getX(), aArrowSize.getMaximum().getY());
                aUpperCenter *= aArrowTransform;
                const double fArrowYLength(B2DVector(aUpperCenter).getLength());

                // move arrow to have docking position centered
                aArrowTransform.translate(0.0, -fArrowYLength * fDockingPosition);

                // prepare polygon length
                if(fTools::equalZero(fCandidateLength))
                {
                    fCandidateLength = getLength(rCandidate);
                }

                // get the polygon vector we want to plant this arrow on
                const double fConsumedLength(fArrowYLength * (1.0 - fDockingPosition));
                const B2DVector aHead(rCandidate.getB2DPoint((bStart) ? 0L : rCandidate.count() - 1L));
                const B2DVector aTail(getPositionAbsolute(rCandidate,
                    (bStart) ? fConsumedLength : fCandidateLength - fConsumedLength, fCandidateLength));

                // from that vector, take the needed rotation and add rotate for arrow to transformation
                const B2DVector aTargetDirection(aHead - aTail);
                const double fRotation(atan2(aTargetDirection.getY(), aTargetDirection.getX()) + (90.0 * F_PI180));

                // rotate around docking position
                aArrowTransform.rotate(fRotation);

                // move arrow docking position to polygon head
                aArrowTransform.translate(aHead.getX(), aHead.getY());

                // transform retval and close
                aRetval.transform(aArrowTransform);
                aRetval.setClosed(true);

                // if pConsumedLength is asked for, fill it
                if(pConsumedLength)
                {
                    *pConsumedLength = fConsumedLength;
                }
            }

            return aRetval;
        }
    } // end of namespace tools
} // end of namespace basegfx

//////////////////////////////////////////////////////////////////////////////

namespace basegfx
{
    // anonymus namespace for local helpers
    namespace
    {
        bool impIsSimpleEdge(const B2DCubicBezier& rCandidate, double fMaxCosQuad, double fMaxPartOfEdgeQuad)
        {
            // isBezier() is true, already tested by caller
            const B2DVector aEdge(rCandidate.getEndPoint() - rCandidate.getStartPoint());

            if(aEdge.equalZero())
            {
                // start and end point the same, but control vectors used -> baloon curve loop
                // is not a simple edge
                return false;
            }

            // get tangentA and scalar with edge
            const B2DVector aTangentA(rCandidate.getTangent(0.0));
            const double fScalarAE(aEdge.scalar(aTangentA));

            if(fTools::lessOrEqual(fScalarAE, 0.0))
            {
                // angle between TangentA and Edge is bigger or equal 90 degrees
                return false;
            }

            // get self-scalars for E and A
            const double fScalarE(aEdge.scalar(aEdge));
            const double fScalarA(aTangentA.scalar(aTangentA));
            const double fLengthCompareE(fScalarE * fMaxPartOfEdgeQuad);

            if(fTools::moreOrEqual(fScalarA, fLengthCompareE))
            {
                // length of TangentA is more than fMaxPartOfEdge of length of edge
                return false;
            }

            if(fTools::lessOrEqual(fScalarAE * fScalarAE, fScalarA * fScalarE * fMaxCosQuad))
            {
                // angle between TangentA and Edge is bigger or equal angle defined by fMaxCos
                return false;
            }

            // get tangentB and scalar with edge
            const B2DVector aTangentB(rCandidate.getTangent(1.0));
            const double fScalarBE(aEdge.scalar(aTangentB));

            if(fTools::lessOrEqual(fScalarBE, 0.0))
            {
                // angle between TangentB and Edge is bigger or equal 90 degrees
                return false;
            }

            // get self-scalar for B
            const double fScalarB(aTangentB.scalar(aTangentB));

            if(fTools::moreOrEqual(fScalarB, fLengthCompareE))
            {
                // length of TangentB is more than fMaxPartOfEdge of length of edge
                return false;
            }

            if(fTools::lessOrEqual(fScalarBE * fScalarBE, fScalarB * fScalarE * fMaxCosQuad))
            {
                // angle between TangentB and Edge is bigger or equal defined by fMaxCos
                return false;
            }

            return true;
        }

        void impSubdivideToSimple(const B2DCubicBezier& rCandidate, B2DPolygon& rTarget, double fMaxCosQuad, double fMaxPartOfEdgeQuad, sal_uInt32 nMaxRecursionDepth)
        {
            if(!nMaxRecursionDepth || impIsSimpleEdge(rCandidate, fMaxCosQuad, fMaxPartOfEdgeQuad))
            {
                rTarget.appendBezierSegment(rCandidate.getControlPointA(), rCandidate.getControlPointB(), rCandidate.getEndPoint());
            }
            else
            {
                B2DCubicBezier aLeft, aRight;
                rCandidate.split(0.5, &aLeft, &aRight);

                impSubdivideToSimple(aLeft, rTarget, fMaxCosQuad, fMaxPartOfEdgeQuad, nMaxRecursionDepth - 1);
                impSubdivideToSimple(aRight, rTarget, fMaxCosQuad, fMaxPartOfEdgeQuad, nMaxRecursionDepth - 1);
            }
        }

        B2DPolygon subdivideToSimple(const B2DPolygon& rCandidate, double fMaxCosQuad, double fMaxPartOfEdgeQuad)
        {
            const sal_uInt32 nPointCount(rCandidate.count());

            if(rCandidate.areControlPointsUsed() && nPointCount)
            {
                const sal_uInt32 nEdgeCount(rCandidate.isClosed() ? nPointCount : nPointCount - 1);
                B2DPolygon aRetval;
                B2DCubicBezier aEdge;

                // prepare edge for loop
                aEdge.setStartPoint(rCandidate.getB2DPoint(0));
                aRetval.append(aEdge.getStartPoint());

                for(sal_uInt32 a(0); a < nEdgeCount; a++)
                {
                    // fill B2DCubicBezier
                    const sal_uInt32 nNextIndex((a + 1) % nPointCount);
                    aEdge.setControlPointA(rCandidate.getNextControlPoint(a));
                    aEdge.setControlPointB(rCandidate.getPrevControlPoint(nNextIndex));
                    aEdge.setEndPoint(rCandidate.getB2DPoint(nNextIndex));

                    // get rid of unnecessary bezier segments
                    aEdge.testAndSolveTrivialBezier();

                    if(aEdge.isBezier())
                    {
                        // before splitting recursively with internal simple criteria, use
                        // ExtremumPosFinder to remove those
                        ::std::vector< double > aExtremumPositions;

                        aExtremumPositions.reserve(4);
                        aEdge.getAllExtremumPositions(aExtremumPositions);

                        const sal_uInt32 nCount(aExtremumPositions.size());

                        if(nCount)
                        {
                            if(nCount > 1)
                            {
                                // create order from left to right
                                ::std::sort(aExtremumPositions.begin(), aExtremumPositions.end());
                            }

                            for(sal_uInt32 b(0); b < nCount;)
                            {
                                // split aEdge at next split pos
                                B2DCubicBezier aLeft;
                                const double fSplitPos(aExtremumPositions[b++]);

                                aEdge.split(fSplitPos, &aLeft, &aEdge);
                                aLeft.testAndSolveTrivialBezier();

                                // consume left part
                                if(aLeft.isBezier())
                                {
                                    impSubdivideToSimple(aLeft, aRetval, fMaxCosQuad, fMaxPartOfEdgeQuad, 6);
                                }
                                else
                                {
                                    aRetval.append(aLeft.getEndPoint());
                                }

                                if(b < nCount)
                                {
                                    // correct the remaining split positions to fit to shortened aEdge
                                    const double fScaleFactor(1.0 / (1.0 - fSplitPos));

                                    for(sal_uInt32 c(b); c < nCount; c++)
                                    {
                                        aExtremumPositions[c] = (aExtremumPositions[c] - fSplitPos) * fScaleFactor;
                                    }
                                }
                            }

                            // test the shortened rest of aEdge
                            aEdge.testAndSolveTrivialBezier();

                            // consume right part
                            if(aEdge.isBezier())
                            {
                                impSubdivideToSimple(aEdge, aRetval, fMaxCosQuad, fMaxPartOfEdgeQuad, 6);
                            }
                            else
                            {
                                aRetval.append(aEdge.getEndPoint());
                            }
                        }
                        else
                        {
                            impSubdivideToSimple(aEdge, aRetval, fMaxCosQuad, fMaxPartOfEdgeQuad, 6);
                        }
                    }
                    else
                    {
                        // straight edge, add point
                        aRetval.append(aEdge.getEndPoint());
                    }

                    // prepare edge for next step
                    aEdge.setStartPoint(aEdge.getEndPoint());
                }

                // copy closed flag and check for double points
                aRetval.setClosed(rCandidate.isClosed());
                aRetval.removeDoublePoints();

                return aRetval;
            }
            else
            {
                return rCandidate;
            }
        }

        B2DPolygon createAreaGeometryForEdge(const B2DCubicBezier& rEdge, double fHalfLineWidth)
        {
            // create polygon for edge
            // Unfortunately, while it would be geometrically correct to not add
            // the in-between points EdgeEnd and EdgeStart, it leads to rounding
            // errors when converting to integer polygon coordinates for painting
            if(rEdge.isBezier())
            {
                // prepare target and data common for upper and lower
                B2DPolygon aBezierPolygon;
                const B2DVector aPureEdgeVector(rEdge.getEndPoint() - rEdge.getStartPoint());
                const double fEdgeLength(aPureEdgeVector.getLength());
                const bool bIsEdgeLengthZero(fTools::equalZero(fEdgeLength));
                const B2DVector aTangentA(rEdge.getTangent(0.0));
                const B2DVector aTangentB(rEdge.getTangent(1.0));

                // create upper edge.
                {
                    // create displacement vectors and check if they cut
                    const B2DVector aPerpendStart(getNormalizedPerpendicular(aTangentA) * -fHalfLineWidth);
                    const B2DVector aPerpendEnd(getNormalizedPerpendicular(aTangentB) * -fHalfLineWidth);
                    double fCut(0.0);
                    const tools::CutFlagValue aCut(tools::findCut(
                        rEdge.getStartPoint(), aPerpendStart,
                        rEdge.getEndPoint(), aPerpendEnd,
                        CUTFLAG_ALL, &fCut));

                    if(CUTFLAG_NONE != aCut)
                    {
                        // calculate cut point and add
                        const B2DPoint aCutPoint(rEdge.getStartPoint() + (aPerpendStart * fCut));
                        aBezierPolygon.append(aCutPoint);
                    }
                    else
                    {
                        // create scaled bezier segment
                        const B2DPoint aStart(rEdge.getStartPoint() + aPerpendStart);
                        const B2DPoint aEnd(rEdge.getEndPoint() + aPerpendEnd);
                        const B2DVector aEdge(aEnd - aStart);
                        const double fLength(aEdge.getLength());
                        const double fScale(bIsEdgeLengthZero ? 1.0 : fLength / fEdgeLength);
                        const B2DVector fRelNext(rEdge.getControlPointA() - rEdge.getStartPoint());
                        const B2DVector fRelPrev(rEdge.getControlPointB() - rEdge.getEndPoint());

                        aBezierPolygon.append(aStart);
                        aBezierPolygon.appendBezierSegment(aStart + (fRelNext * fScale), aEnd + (fRelPrev * fScale), aEnd);
                    }
                }

                // append original in-between point
                aBezierPolygon.append(rEdge.getEndPoint());

                // create lower edge.
                {
                    // create displacement vectors and check if they cut
                    const B2DVector aPerpendStart(getNormalizedPerpendicular(aTangentA) * fHalfLineWidth);
                    const B2DVector aPerpendEnd(getNormalizedPerpendicular(aTangentB) * fHalfLineWidth);
                    double fCut(0.0);
                    const tools::CutFlagValue aCut(tools::findCut(
                        rEdge.getEndPoint(), aPerpendEnd,
                        rEdge.getStartPoint(), aPerpendStart,
                        CUTFLAG_ALL, &fCut));

                    if(CUTFLAG_NONE != aCut)
                    {
                        // calculate cut point and add
                        const B2DPoint aCutPoint(rEdge.getEndPoint() + (aPerpendEnd * fCut));
                        aBezierPolygon.append(aCutPoint);
                    }
                    else
                    {
                        // create scaled bezier segment
                        const B2DPoint aStart(rEdge.getEndPoint() + aPerpendEnd);
                        const B2DPoint aEnd(rEdge.getStartPoint() + aPerpendStart);
                        const B2DVector aEdge(aEnd - aStart);
                        const double fLength(aEdge.getLength());
                        const double fScale(bIsEdgeLengthZero ? 1.0 : fLength / fEdgeLength);
                        const B2DVector fRelNext(rEdge.getControlPointB() - rEdge.getEndPoint());
                        const B2DVector fRelPrev(rEdge.getControlPointA() - rEdge.getStartPoint());

                        aBezierPolygon.append(aStart);
                        aBezierPolygon.appendBezierSegment(aStart + (fRelNext * fScale), aEnd + (fRelPrev * fScale), aEnd);
                    }
                }

                // append original in-between point
                aBezierPolygon.append(rEdge.getStartPoint());

                // close and return
                aBezierPolygon.setClosed(true);
                return aBezierPolygon;
            }
            else
            {
                // #i101491# emulate rEdge.getTangent call which applies a factor of 0.3 to the
                // full-length edge vector to have numerically exactly the same results as in the
                // createAreaGeometryForJoin implementation
                const B2DVector aEdgeTangent((rEdge.getEndPoint() - rEdge.getStartPoint()) * 0.3);
                const B2DVector aPerpendEdgeVector(getNormalizedPerpendicular(aEdgeTangent) * fHalfLineWidth);
                B2DPolygon aEdgePolygon;

                // create upper edge
                aEdgePolygon.append(rEdge.getStartPoint() - aPerpendEdgeVector);
                aEdgePolygon.append(rEdge.getEndPoint() - aPerpendEdgeVector);

                // append original in-between point
                aEdgePolygon.append(rEdge.getEndPoint());

                // create lower edge
                aEdgePolygon.append(rEdge.getEndPoint() + aPerpendEdgeVector);
                aEdgePolygon.append(rEdge.getStartPoint() + aPerpendEdgeVector);

                // append original in-between point
                aEdgePolygon.append(rEdge.getStartPoint());

                // close and return
                aEdgePolygon.setClosed(true);
                return aEdgePolygon;
            }
        }

        B2DPolygon createAreaGeometryForJoin(
            const B2DVector& rTangentPrev,
            const B2DVector& rTangentEdge,
            const B2DVector& rPerpendPrev,
            const B2DVector& rPerpendEdge,
            const B2DPoint& rPoint,
            double fHalfLineWidth,
            B2DLineJoin eJoin,
            double fMiterMinimumAngle)
        {
            OSL_ENSURE(fHalfLineWidth > 0.0, "createAreaGeometryForJoin: LineWidth too small (!)");
            OSL_ENSURE(B2DLINEJOIN_NONE != eJoin, "createAreaGeometryForJoin: B2DLINEJOIN_NONE not allowed (!)");

            // LineJoin from tangent rPerpendPrev to tangent rPerpendEdge in rPoint
            B2DPolygon aEdgePolygon;
            const B2DPoint aStartPoint(rPoint + rPerpendPrev);
            const B2DPoint aEndPoint(rPoint + rPerpendEdge);

            // test if for Miter, the angle is too small and the fallback
            // to bevel needs to be used
            if(B2DLINEJOIN_MITER == eJoin)
            {
                const double fAngle(fabs(rPerpendPrev.angle(rPerpendEdge)));

                if((F_PI - fAngle) < fMiterMinimumAngle)
                {
                    // fallback to bevel
                    eJoin = B2DLINEJOIN_BEVEL;
                }
            }

            switch(eJoin)
            {
                case B2DLINEJOIN_MITER :
                {
                    aEdgePolygon.append(aEndPoint);
                    aEdgePolygon.append(rPoint);
                    aEdgePolygon.append(aStartPoint);

                    // Look for the cut point between start point along rTangentPrev and
                    // end point along rTangentEdge. -rTangentEdge should be used, but since
                    // the cut value is used for interpolating along the first edge, the negation
                    // is not needed since the same fCut will be found on the first edge.
                    // If it exists, insert it to complete the mitered fill polygon.
                    double fCutPos(0.0);
                    tools::findCut(aStartPoint, rTangentPrev, aEndPoint, rTangentEdge, CUTFLAG_ALL, &fCutPos);

                    if(0.0 != fCutPos)
                    {
                        const B2DPoint aCutPoint(interpolate(aStartPoint, aStartPoint + rTangentPrev, fCutPos));
                        aEdgePolygon.append(aCutPoint);
                    }

                    break;
                }
                case B2DLINEJOIN_ROUND :
                {
                    // use tooling to add needed EllipseSegment
                    double fAngleStart(atan2(rPerpendPrev.getY(), rPerpendPrev.getX()));
                    double fAngleEnd(atan2(rPerpendEdge.getY(), rPerpendEdge.getX()));

                    // atan2 results are [-PI .. PI], consolidate to [0.0 .. 2PI]
                    if(fAngleStart < 0.0)
                    {
                        fAngleStart += F_2PI;
                    }

                    if(fAngleEnd < 0.0)
                    {
                        fAngleEnd += F_2PI;
                    }

                    const B2DPolygon aBow(tools::createPolygonFromEllipseSegment(rPoint, fHalfLineWidth, fHalfLineWidth, fAngleStart, fAngleEnd));

                    if(aBow.count() > 1)
                    {
                        // #i101491#
                        // use the original start/end positions; the ones from bow creation may be numerically
                        // different due to their different creation. To guarantee good merging quality with edges
                        // and edge roundings (and to reduce point count)
                        aEdgePolygon = aBow;
                        aEdgePolygon.setB2DPoint(0, aStartPoint);
                        aEdgePolygon.setB2DPoint(aEdgePolygon.count() - 1, aEndPoint);
                        aEdgePolygon.append(rPoint);

                        break;
                    }
                    else
                    {
                        // wanted fall-through to default
                    }
                }
                default: // B2DLINEJOIN_BEVEL
                {
                    aEdgePolygon.append(aEndPoint);
                    aEdgePolygon.append(rPoint);
                    aEdgePolygon.append(aStartPoint);

                    break;
                }
            }

            // create last polygon part for edge
            aEdgePolygon.setClosed(true);

            return aEdgePolygon;
        }
    } // end of anonymus namespace

    namespace tools
    {
        B2DPolyPolygon createAreaGeometry(
            const B2DPolygon& rCandidate,
            double fHalfLineWidth,
            B2DLineJoin eJoin,
            double fMaxAllowedAngle,
            double fMaxPartOfEdge,
            double fMiterMinimumAngle)
        {
            if(fMaxAllowedAngle > F_PI2)
            {
                fMaxAllowedAngle = F_PI2;
            }
            else if(fMaxAllowedAngle < 0.01 * F_PI2)
            {
                fMaxAllowedAngle = 0.01 * F_PI2;
            }

            if(fMaxPartOfEdge > 1.0)
            {
                fMaxPartOfEdge = 1.0;
            }
            else if(fMaxPartOfEdge < 0.01)
            {
                fMaxPartOfEdge = 0.01;
            }

            if(fMiterMinimumAngle > F_PI)
            {
                fMiterMinimumAngle = F_PI;
            }
            else if(fMiterMinimumAngle < 0.01 * F_PI)
            {
                fMiterMinimumAngle = 0.01 * F_PI;
            }

            B2DPolygon aCandidate(rCandidate);
            const double fMaxCos(cos(fMaxAllowedAngle));

            aCandidate.removeDoublePoints();
            aCandidate = subdivideToSimple(aCandidate, fMaxCos * fMaxCos, fMaxPartOfEdge * fMaxPartOfEdge);

            const sal_uInt32 nPointCount(aCandidate.count());

            if(nPointCount)
            {
                B2DPolyPolygon aRetval;
                const bool bEventuallyCreateLineJoin(B2DLINEJOIN_NONE != eJoin);
                const bool bIsClosed(aCandidate.isClosed());
                const sal_uInt32 nEdgeCount(bIsClosed ? nPointCount : nPointCount - 1);

                if(nEdgeCount)
                {
                    B2DCubicBezier aEdge;
                    B2DCubicBezier aPrev;

                    // prepare edge
                    aEdge.setStartPoint(aCandidate.getB2DPoint(0));

                    if(bIsClosed && bEventuallyCreateLineJoin)
                    {
                        // prepare previous edge
                        const sal_uInt32 nPrevIndex(nPointCount - 1);
                        aPrev.setStartPoint(aCandidate.getB2DPoint(nPrevIndex));
                        aPrev.setControlPointA(aCandidate.getNextControlPoint(nPrevIndex));
                        aPrev.setControlPointB(aCandidate.getPrevControlPoint(0));
                        aPrev.setEndPoint(aEdge.getStartPoint());
                    }

                    for(sal_uInt32 a(0); a < nEdgeCount; a++)
                    {
                        // fill current Edge
                        const sal_uInt32 nNextIndex((a + 1) % nPointCount);
                        aEdge.setControlPointA(aCandidate.getNextControlPoint(a));
                        aEdge.setControlPointB(aCandidate.getPrevControlPoint(nNextIndex));
                        aEdge.setEndPoint(aCandidate.getB2DPoint(nNextIndex));

                        // check and create linejoin
                        if(bEventuallyCreateLineJoin && (bIsClosed || 0 != a))
                        {
                            const B2DVector aTangentPrev(aPrev.getTangent(1.0));
                            const B2DVector aTangentEdge(aEdge.getTangent(0.0));
                            B2VectorOrientation aOrientation(getOrientation(aTangentPrev, aTangentEdge));

                            if(ORIENTATION_NEUTRAL == aOrientation)
                            {
                                // they are parallell or empty; if they are both not zero and point
                                // in opposite direction, a half-circle is needed
                                if(!aTangentPrev.equalZero() && !aTangentEdge.equalZero())
                                {
                                    const double fAngle(fabs(aTangentPrev.angle(aTangentEdge)));

                                    if(fTools::equal(fAngle, F_PI))
                                    {
                                        // for half-circle production, fallback to positive
                                        // orientation
                                        aOrientation = ORIENTATION_POSITIVE;
                                    }
                                }
                            }

                            if(ORIENTATION_POSITIVE == aOrientation)
                            {
                                const B2DVector aPerpendPrev(getNormalizedPerpendicular(aTangentPrev) * -fHalfLineWidth);
                                const B2DVector aPerpendEdge(getNormalizedPerpendicular(aTangentEdge) * -fHalfLineWidth);

                                aRetval.append(createAreaGeometryForJoin(
                                    aTangentPrev, aTangentEdge,
                                    aPerpendPrev, aPerpendEdge,
                                    aEdge.getStartPoint(), fHalfLineWidth,
                                    eJoin, fMiterMinimumAngle));
                            }
                            else if(ORIENTATION_NEGATIVE == aOrientation)
                            {
                                const B2DVector aPerpendPrev(getNormalizedPerpendicular(aTangentPrev) * fHalfLineWidth);
                                const B2DVector aPerpendEdge(getNormalizedPerpendicular(aTangentEdge) * fHalfLineWidth);

                                aRetval.append(createAreaGeometryForJoin(
                                    aTangentEdge, aTangentPrev,
                                    aPerpendEdge, aPerpendPrev,
                                    aEdge.getStartPoint(), fHalfLineWidth,
                                    eJoin, fMiterMinimumAngle));
                            }
                        }

                        // create geometry for edge
                        aRetval.append(createAreaGeometryForEdge(aEdge, fHalfLineWidth));

                        // prepare next step
                        if(bEventuallyCreateLineJoin)
                        {
                            aPrev = aEdge;
                        }

                        aEdge.setStartPoint(aEdge.getEndPoint());
                    }
                }

                return aRetval;
            }
            else
            {
                return B2DPolyPolygon(rCandidate);
            }
        }
    } // end of namespace tools
} // end of namespace basegfx

//////////////////////////////////////////////////////////////////////////////
// eof

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */