/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */

#include <iterator>
#include <numeric>
#include <hintids.hxx>
#include <svl/urihelper.hxx>
#include <svx/svdpage.hxx>
#include <svx/svdograf.hxx>
#include <svx/svdoole2.hxx>
#include <filter/msfilter/msdffimp.hxx>
#include <grfatr.hxx>
#include <fmtanchr.hxx>
#include <fmtcntnt.hxx>
#include <frmfmt.hxx>
#include <pam.hxx>
#include <doc.hxx>
#include <IDocumentLayoutAccess.hxx>
#include <mdiexp.hxx>
#include "writerwordglue.hxx"
#include "ww8struc.hxx"
#include "ww8scan.hxx"
#include "ww8par.hxx"
#include "ww8par2.hxx"
#include "ww8graf.hxx"
#include <vcl/gdimtf.hxx>
#include <vcl/graphicfilter.hxx>
#include <vcl/wmf.hxx>

using namespace ::com::sun::star;
using namespace sw::types;

wwZOrderer::wwZOrderer(const sw::util::SetLayer &rSetLayer, SdrPage* pDrawPg,
    const SvxMSDffShapeOrders *pShapeOrders)
    : maSetLayer(rSetLayer), mnInlines(0), mpDrawPg(pDrawPg),
    mpShapeOrders(pShapeOrders)
{
    mnNoInitialObjects = mpDrawPg->GetObjCount();
    OSL_ENSURE(mpDrawPg,"Missing draw page impossible!");
}

void wwZOrderer::InsideEscher(sal_uLong nSpId)
{
    maIndexes.push(GetEscherObjectIdx(nSpId));
}

void wwZOrderer::OutsideEscher()
{
    maIndexes.pop();
}

// consider new parameter <_bInHeaderFooter>
void wwZOrderer::InsertEscherObject( SdrObject* pObject,
                                     sal_uLong nSpId,
                                     const bool bInHellLayer,
                                     const bool _bInHeaderFooter )
{
    sal_uLong nInsertPos = GetEscherObjectPos( nSpId, bInHellLayer, _bInHeaderFooter );
    InsertObject(pObject, nInsertPos + mnNoInitialObjects + mnInlines);
}

wwZOrderer::myeiter wwZOrderer::MapEscherIdxToIter(sal_uLong nIdx)
{
    return std::find_if(maEscherLayer.begin(), maEscherLayer.end(),
        [nIdx](const EscherShape& rShape) { return rShape.mnEscherShapeOrder == nIdx; });
}

sal_uInt16 wwZOrderer::GetEscherObjectIdx(sal_uLong nSpId)
{
    sal_uInt16 nFound=0;
    sal_uInt16 nShapeCount = mpShapeOrders ? mpShapeOrders->size() : 0;
    // First, find out what position this shape is in the Escher order.
    for (sal_uInt16 nShapePos=0; nShapePos < nShapeCount; nShapePos++)
    {
        const SvxMSDffShapeOrder& rOrder = *(*mpShapeOrders)[nShapePos];
        if (rOrder.nShapeId == nSpId)
        {
            nFound = nShapePos;
            break;
        }
    }
    return nFound;
}

// consider new parameter <_bInHeaderFooter>
sal_uLong wwZOrderer::GetEscherObjectPos( sal_uLong nSpId,
                                          const bool bInHellLayer,
                                      const bool _bInHeaderFooter )
{
    /*
    EscherObjects have their own ordering which needs to be matched to
    the actual ordering that should be used when inserting them into the
    document.
    */
    sal_uInt16 nFound = GetEscherObjectIdx(nSpId);
    // Match the ordering position from the ShapeOrders to the ordering of all
    // objects in the document, there is a complexity when escherobjects
    // contain inlines objects, we need to consider those as part of the
    // escher count
    sal_uLong nRet=0;
    myeiter aIter = maEscherLayer.begin();
    myeiter aEnd = maEscherLayer.end();
    // skip objects in page header|footer,
    // if current object isn't in page header|footer
    if ( !_bInHeaderFooter )
    {
        while ( aIter != aEnd )
        {
            if ( !aIter->mbInHeaderFooter )
            {
                break;
            }
            nRet += aIter->mnNoInlines + 1;
            ++aIter;
        }
    }
    if (!bInHellLayer)
    {
        while (aIter != aEnd)
        {
            if (!aIter->mbInHellLayer || (_bInHeaderFooter && !aIter->mbInHeaderFooter))
                break;
            nRet += aIter->mnNoInlines + 1;
            ++aIter;
        }
    }
    while (aIter != aEnd)
    {
        // insert object in page header|footer
        // before objects in page body
        if ( _bInHeaderFooter && !aIter->mbInHeaderFooter )
        {
            break;
        }
        if ( bInHellLayer && !aIter->mbInHellLayer )
            break;

        if ( aIter->mnEscherShapeOrder > nFound )
            break;
        nRet += aIter->mnNoInlines+1;
        ++aIter;
    }
    maEscherLayer.insert(aIter, EscherShape( nFound, bInHellLayer, _bInHeaderFooter ) );
    return nRet;
}

// InsertObj() adds the object into the Sw-Page and memorize the Z-position
// in a VarArr
void wwZOrderer::InsertDrawingObject(SdrObject* pObj, short nWwHeight)
{
    sal_uLong nPos = GetDrawingObjectPos(nWwHeight);
    if (nWwHeight & 0x2000)                 // Heaven ?
        maSetLayer.SendObjectToHeaven(*pObj);
    else
        maSetLayer.SendObjectToHell(*pObj);

    InsertObject(pObj, nPos + mnNoInitialObjects + mnInlines);
}

void wwZOrderer::InsertTextLayerObject(SdrObject* pObject)
{
    maSetLayer.SendObjectToHeaven(*pObject);
    if (maIndexes.empty())
    {
        InsertObject(pObject, mnNoInitialObjects + mnInlines);
        ++mnInlines;
    }
    else
    {
        //If we are inside an escher objects, place us just after that
        //escher obj, and increment its inline count
        sal_uInt16 nIdx = maIndexes.top();
        myeiter aEnd = MapEscherIdxToIter(nIdx);

        sal_uLong nInsertPos = std::accumulate(maEscherLayer.begin(), aEnd, sal_uLong(0),
            [](const sal_uLong nPos, const EscherShape& rShape) { return nPos + rShape.mnNoInlines + 1; });

        OSL_ENSURE(aEnd != maEscherLayer.end(), "Something very wrong here");
        if (aEnd != maEscherLayer.end())
        {
            aEnd->mnNoInlines++;
            nInsertPos += aEnd->mnNoInlines;
        }

        InsertObject(pObject, mnNoInitialObjects + mnInlines + nInsertPos);
    }
}

/* Parallel to the Obj-array in the document I also build an array which
 * contains the Ww-height (-> what covers what).
 * Based on this VARARR the position where the insertion happens is
 * determined.
 * When inserting the offset in an existing document with a graphic layer the
 * caller has to increment the index by mnNoInitialObjects, so that the new
 * objects are added at the end (inserting is faster then)
 */
sal_uLong wwZOrderer::GetDrawingObjectPos(short nWwHeight)
{
    auto aIter = std::find_if(
        maDrawHeight.begin(), maDrawHeight.end(),
        [nWwHeight](short aHeight){ return (aHeight & 0x1fff) > (nWwHeight & 0x1fff); });

    aIter = maDrawHeight.insert(aIter, nWwHeight);
    return std::distance(maDrawHeight.begin(), aIter);
}

void wwZOrderer::InsertObject(SdrObject* pObject, sal_uLong nPos)
{
    if (!pObject->IsInserted())
    {
        mpDrawPg->InsertObject(pObject, nPos);
    }
}

static void WW8PicShadowToReal(  WW8_PIC_SHADOW const *  pPicS,  WW8_PIC*  pPic );

bool SwWW8ImplReader::GetPictGrafFromStream(Graphic& rGraphic, SvStream& rSrc)
{
    return ERRCODE_NONE == GraphicFilter::GetGraphicFilter().ImportGraphic(rGraphic, u"", rSrc);
}

bool SwWW8ImplReader::ReadGrafFile(OUString& rFileName, std::optional<Graphic>& roGraphic,
    const WW8_PIC& rPic, SvStream* pSt, sal_uLong nFilePos, bool* pbInDoc)
{                                                  // Write the graphic to the file
    *pbInDoc = true;                               // default

    sal_uLong nPosFc = nFilePos + rPic.cbHeader;

    switch (rPic.MFP.mm)
    {
        case 94: // BMP-file ( not embedded ) or GIF
        case 99: // TIFF-file ( not embedded )
            pSt->Seek(nPosFc);
            // read name as P-string
            rFileName = read_uInt8_PascalString(*pSt, m_eStructCharSet);
            if (!rFileName.isEmpty())
                rFileName = URIHelper::SmartRel2Abs(
                    INetURLObject(m_sBaseURL), rFileName,
                    URIHelper::GetMaybeFileHdl());
            *pbInDoc = false;       // Don't delete the file afterwards
            return !rFileName.isEmpty();        // read was successful
    }

    //skip duplicate graphics when fuzzing
    if (m_bFuzzing)
    {
        if (!m_aGrafPosSet.insert(nPosFc).second)
            return false;
    }

    GDIMetaFile aWMF;
    bool bOk = checkSeek(*pSt, nPosFc) && ReadWindowMetafile( *pSt, aWMF );

    if (!bOk || pSt->GetError() || !aWMF.GetActionSize())
        return false;

    if (m_xWwFib->m_envr != 1) // !MAC as creator
    {
        roGraphic.emplace(aWMF);
        return true;
    }

    // MAC - word as creator
    // The WMF only says "Please use Word 6.0c" and Mac-Pict follows but without
    // the first 512 Bytes which are not relevant in a MAC-PICT (they are not
    // interpreted)
    bOk = false;
    tools::Long nData = rPic.lcb - ( pSt->Tell() - nPosFc );
    if (nData > 0)
    {
        roGraphic.emplace();
        bOk = SwWW8ImplReader::GetPictGrafFromStream(*roGraphic, *pSt);
        if (!bOk)
            roGraphic.reset();
    }
    return bOk; // Contains graphic
}

struct WW8PicDesc
{
    sal_Int16 nCL, nCR, nCT, nCB;
    tools::Long nWidth, nHeight;

    explicit WW8PicDesc( const WW8_PIC& rPic );
};

WW8PicDesc::WW8PicDesc( const WW8_PIC& rPic )
  : nCL(rPic.dxaCropLeft),
    nCR(rPic.dxaCropRight),
    nCT(rPic.dyaCropTop),
    nCB(rPic.dyaCropBottom)
{
    //See #i21190# before fiddling with this method
    tools::Long nOriWidth = rPic.dxaGoal;        //Size in 1/100 mm before crop
    tools::Long nOriHeight = rPic.dyaGoal;


    tools::Long nCurrentWidth  = nOriWidth - (nCL + nCR);  // Size after crop
    tools::Long nCurrentHeight = nOriHeight - (nCT + nCB);
    if (!nCurrentWidth)
        nCurrentWidth  = 1;
    if (!nCurrentHeight)
        nCurrentHeight = 1;
    nWidth = nCurrentWidth * rPic.mx / 1000;        // Writer Size
    nHeight = nCurrentHeight * rPic.my / 1000;
}

void SwWW8ImplReader::ReplaceObj(const SdrObject &rReplaceObj,
    SdrObject &rSubObj)
{
    // Insert SdrGrafObj instead of SdrTextObj into this group
    if (SdrObject* pGroupObject = rReplaceObj.getParentSdrObjectFromSdrObject())
    {
        SdrObjList* pObjectList = pGroupObject->GetSubList();

        rSubObj.SetLogicRect(rReplaceObj.GetCurrentBoundRect());
        rSubObj.SetLayer(rReplaceObj.GetLayer());

        // remove old object from group-list and add new one
        // (this also exchanges it in the drawing page)
        pObjectList->ReplaceObject(&rSubObj, rReplaceObj.GetOrdNum());
    }
    else
    {
        OSL_ENSURE( false, "Impossible!");
    }
}

// MakeGrafNotInContent inserts a non character bound graphic
// ( bGrafApo == true)
SwFlyFrameFormat* SwWW8ImplReader::MakeGrafNotInContent(const WW8PicDesc& rPD,
    const Graphic* pGraph, const OUString& rFileName, const SfxItemSet& rGrfSet)
{

    sal_uInt32 nWidth = rPD.nWidth;
    sal_uInt32 nHeight = rPD.nHeight;

    // Vertical shift through line spacing
    sal_Int32 nNetHeight = nHeight + rPD.nCT + rPD.nCB;
    if (m_xSFlyPara->nLineSpace && m_xSFlyPara->nLineSpace > nNetHeight)
        m_xSFlyPara->nYPos =
            o3tl::narrowing<sal_uInt16>( m_xSFlyPara->nYPos + m_xSFlyPara->nLineSpace - nNetHeight );

    WW8FlySet aFlySet(*this, m_xWFlyPara.get(), m_xSFlyPara.get(), true);

    SwFormatAnchor aAnchor(WW8SwFlyPara::eAnchor);
    aAnchor.SetAnchor(m_pPaM->GetPoint());
    aFlySet.Put(aAnchor);

    aFlySet.Put( SwFormatFrameSize( SwFrameSize::Fixed, nWidth, nHeight ) );

    SwFlyFrameFormat *const pFlyFormat =
        m_rDoc.getIDocumentContentOperations().InsertGraphic(
            *m_pPaM, rFileName, OUString(), pGraph,
            &aFlySet, &rGrfSet, nullptr);

    // So the frames are generated when inserted in an existing doc:
    if (m_rDoc.getIDocumentLayoutAccess().GetCurrentViewShell() &&
        (RndStdIds::FLY_AT_PARA == pFlyFormat->GetAnchor().GetAnchorId()))
    {
        pFlyFormat->MakeFrames();
    }
    return pFlyFormat;
}

// MakeGrafInContent inserts a character bound graphic
SwFrameFormat* SwWW8ImplReader::MakeGrafInContent(const WW8_PIC& rPic,
    const WW8PicDesc& rPD, const Graphic* pGraph, const OUString& rFileName,
    const SfxItemSet& rGrfSet)
{
    WW8FlySet aFlySet(*this, m_pPaM, rPic, rPD.nWidth, rPD.nHeight);

    SwFrameFormat* pFlyFormat = nullptr;

    if (rFileName.isEmpty() && m_nObjLocFc)      // then it should be an OLE-Object
        pFlyFormat = ImportOle(pGraph, &aFlySet, &rGrfSet);

    if( !pFlyFormat )                          // then just as graphic
    {

        pFlyFormat = m_rDoc.getIDocumentContentOperations().InsertGraphic(
            *m_pPaM, rFileName, OUString(), pGraph, &aFlySet,
            &rGrfSet, nullptr);
    }

    // Resize the frame to the size of the picture if graphic is inside a frame
    // (only if auto-width)
    if (m_xSFlyPara)
        m_xSFlyPara->BoxUpWidth( rPD.nWidth );
    return pFlyFormat;
}

SwFrameFormat* SwWW8ImplReader::ImportGraf1(WW8_PIC const & rPic, SvStream* pSt,
    sal_uLong nFilePos )
{
    SwFrameFormat* pRet = nullptr;
    if( pSt->eof() || rPic.fError || rPic.MFP.mm == 99 )
        return nullptr;

    OUString aFileName;
    bool bInDoc;
    std::optional<Graphic> oGraph;
    bool bOk = ReadGrafFile(aFileName, oGraph, rPic, pSt, nFilePos, &bInDoc);

    if (!bOk)
    {
        return nullptr;                       // Graphic could not be read correctly
    }

    WW8PicDesc aPD( rPic );

    SwAttrSet aGrfSet( m_rDoc.GetAttrPool(), RES_GRFATR_BEGIN, RES_GRFATR_END-1);
    if( aPD.nCL || aPD.nCR || aPD.nCT || aPD.nCB )
    {
        SwCropGrf aCrop( aPD.nCL, aPD.nCR, aPD.nCT, aPD.nCB) ;
        aGrfSet.Put( aCrop );
    }

    if (m_xWFlyPara && m_xWFlyPara->bGrafApo)
        pRet = MakeGrafNotInContent(aPD, oGraph ? &*oGraph : nullptr, aFileName, aGrfSet);
    else
        pRet = MakeGrafInContent(rPic, aPD, oGraph ? &*oGraph : nullptr, aFileName, aGrfSet);
    return pRet;
}

bool SwWW8ImplReader::PicRead(SvStream *pDataStream, WW8_PIC *pPic,
    bool bVer67)
{
    //Only the first 0x2e bytes are the same between version 6/7 and 8+
    WW8_PIC_SHADOW aPicS{};
    pDataStream->ReadBytes( &aPicS, sizeof( aPicS ) );
    WW8PicShadowToReal( &aPicS, pPic );
    for (WW8_BRC & i : pPic->rgbrc)
        pDataStream->ReadBytes(&i, bVer67 ? 2 : 4);
    pDataStream->ReadInt16( pPic->dxaOrigin );
    pDataStream->ReadInt16( pPic->dyaOrigin );
    bool bOk = pDataStream->good();
    if (!bVer67)
        pDataStream->SeekRel(2);  //cProps
    return bOk;
}

namespace
{
    SwNodeType GetNodeType(SwFrameFormat const &rSource)
    {
        const SwNodeIndex* pNodeIndex = rSource.GetContent().GetContentIdx();
        if (!pNodeIndex)
            return SwNodeType::NONE;
        const SwNode& rCSttNd = pNodeIndex->GetNode();
        SwNodeRange aRg(rCSttNd, SwNodeOffset(1), *rCSttNd.EndOfSectionNode());
        return aRg.aStart.GetNode().GetNodeType();
    }
}

SwFrameFormat* SwWW8ImplReader::ImportGraf(SdrTextObj const * pTextObj,
    SwFrameFormat const * pOldFlyFormat)
{
    SwFrameFormat* pRet = nullptr;
    if (
        ((m_pStrm == m_pDataStream ) && !m_nPicLocFc) ||
        (m_nIniFlags & WW8FL_NO_GRAF)
       )
    {
        return nullptr;
    }

    ::SetProgressState(m_nProgress, m_pDocShell);         // Update

    GraphicCtor();

    /*
     * Little joke from Microsoft: sometimes a stream named DATA exists. This
     * stream then contains the PICF and the corresponding graphic!
     * We otherwise map the variable pDataStream to pStream.
     */
    auto nOldPos = m_pDataStream->Tell();
    WW8_PIC aPic;
    bool bValid = checkSeek(*m_pDataStream, m_nPicLocFc) &&
                  PicRead(m_pDataStream, &aPic, m_bVer67);

    // Sanity check is needed because for example check boxes in field results
    // contain a WMF-like struct
    if (bValid && aPic.lcb >= 58)
    {
        if( m_pFlyFormatOfJustInsertedGraphic )
        {
            // We just added a graphic-link into the doc. Now we need to set
            // its position and scale it.
            WW8PicDesc aPD( aPic );

            WW8FlySet aFlySet( *this, m_pPaM, aPic, aPD.nWidth, aPD.nHeight );

            // the correct anchor is set in Read_F_IncludePicture and the
            // current PaM point is after the position if it is anchored in
            // content; because this anchor add a character into the textnode.
            // #i2806#
            if (RndStdIds::FLY_AS_CHAR ==
                m_pFlyFormatOfJustInsertedGraphic->GetAnchor().GetAnchorId() )
            {
                aFlySet.ClearItem( RES_ANCHOR );
            }

            m_pFlyFormatOfJustInsertedGraphic->SetFormatAttr( aFlySet );

            m_pFlyFormatOfJustInsertedGraphic = nullptr;
        }
        else if((0x64 == aPic.MFP.mm) || (0x66 == aPic.MFP.mm))
        {
            // linked graphic in ESCHER-Object
            rtl::Reference<SdrObject> pObject;

            WW8PicDesc aPD( aPic );
            if (!m_xMSDffManager)
                m_xMSDffManager.reset(new SwMSDffManager(*this, m_bSkipImages));
            /* ##835##
             * Disable use of main stream as fallback stream for inline direct
             * blips as it is known that they are directly after the record
             * header, testing for existence in main stream may lead to an
             * incorrect fallback graphic being found if other escher graphics
             * have been inserted in the document
             */
            m_xMSDffManager->DisableFallbackStream();
            if (!m_xMSDffManager->GetModel())
                m_xMSDffManager->SetModel(m_pDrawModel, 1440);

            if (0x66 == aPic.MFP.mm)
            {
                //These ones have names prepended
                sal_uInt8 nNameLen=0;
                m_pDataStream->ReadUChar( nNameLen );
                m_pDataStream->SeekRel( nNameLen );
            }

            tools::Rectangle aClientRect( 0,0, aPD.nWidth,  aPD.nHeight);
            SvxMSDffImportData aData( aClientRect );
            pObject = m_xMSDffManager->ImportObj(*m_pDataStream, aData, aClientRect, tools::Rectangle(), /*nCalledByGroup*/0, /*pShapeId*/nullptr );
            if (pObject)
            {
                // for the frame
                SfxItemSetFixed<RES_FRMATR_BEGIN, RES_FRMATR_END-1> aAttrSet( m_rDoc.GetAttrPool() );

                SvxMSDffImportRec const*const pRecord = (1 == aData.size())
                    ? aData.begin()->get() : nullptr;

                if( pRecord )
                {

                    // Horizontal rule may have its width given as % of page
                    // width (-1 is used if not given, 0 means the object has
                    // fixed width).
                    // Additionally, if it's a horizontal rule without width
                    // given, assume 100.0% width.
                    int relativeWidth = pRecord->relativeHorizontalWidth;
                    if( relativeWidth == -1 )
                        relativeWidth = pRecord->isHorizontalRule ? 1000 : 0;
                    if( relativeWidth != 0 )
                    {
                        const sal_Int16 nScale = aPic.dxaGoal ? aPic.dxaGoal : 1000;
                        aPic.mx = msword_cast<sal_uInt16>(
                            m_aSectionManager.GetPageWidth() -
                            m_aSectionManager.GetPageRight() -
                            m_aSectionManager.GetPageLeft()) * relativeWidth / nScale;
                        aPD = WW8PicDesc( aPic );
                        // This SetSnapRect() call adjusts the size of the
                        // object itself, no idea why it's this call (or even
                        // what the call actually does), but that's what
                        // ImportGraf() (called by ImportObj()) uses.
                        pObject->SetSnapRect( tools::Rectangle( 0, 0, aPD.nWidth, aPD.nHeight ));
                    }

                    // A graphic of this type in this location is always
                    // inline, and uses the pic in the same module as ww6
                    // graphics.
                    if (m_xWFlyPara && m_xWFlyPara->bGrafApo)
                    {
                        WW8FlySet aFlySet(*this, m_xWFlyPara.get(), m_xSFlyPara.get(), true);

                        SwFormatAnchor aAnchor(WW8SwFlyPara::eAnchor);
                        aAnchor.SetAnchor(m_pPaM->GetPoint());
                        aFlySet.Put(aAnchor);

                        aAttrSet.Put(aFlySet);
                    }
                    else
                    {
                        WW8FlySet aFlySet( *this, m_pPaM, aPic, aPD.nWidth,
                            aPD.nHeight );

                        aAttrSet.Put(aFlySet);
                    }
                    // Modified for i120716,for graf importing from MS Word 2003
                    // binary format, there is no border distance.
                    tools::Rectangle aInnerDist(0,0,0,0);
                    MatchSdrItemsIntoFlySet( pObject.get(), aAttrSet,
                        pRecord->eLineStyle, pRecord->eLineDashing,
                        pRecord->eShapeType, aInnerDist );

                    // Set the size from the WinWord PIC-structure as graphic
                    // size
                    aAttrSet.Put( SwFormatFrameSize( SwFrameSize::Fixed, aPD.nWidth,
                        aPD.nHeight ) );
                }

                // for the graphic
                SfxItemSetFixed<RES_GRFATR_BEGIN, RES_GRFATR_END-1> aGrSet( m_rDoc.GetAttrPool() );

                if( aPD.nCL || aPD.nCR || aPD.nCT || aPD.nCB )
                {
                    SwCropGrf aCrop( aPD.nCL, aPD.nCR, aPD.nCT, aPD.nCB );
                    aGrSet.Put( aCrop );
                }

                if (pRecord)
                    MatchEscherMirrorIntoFlySet(*pRecord, aGrSet);

                // if necessary adopt old AttrSet and correct horizontal
                // positioning relation
                if( pOldFlyFormat )
                {
                    aAttrSet.Put( pOldFlyFormat->GetAttrSet() );
                    const SwFormatHoriOrient &rHori = pOldFlyFormat->GetHoriOrient();
                    if( text::RelOrientation::FRAME == rHori.GetRelationOrient() )
                    {
                        aAttrSet.Put( SwFormatHoriOrient( rHori.GetPos(),
                            text::HoriOrientation::NONE, text::RelOrientation::PAGE_PRINT_AREA ) );
                    }
                }

                bool bTextObjWasGrouped = false;
                if (pOldFlyFormat && pTextObj && pTextObj->getParentSdrObjectFromSdrObject())
                    bTextObjWasGrouped = true;

                if (bTextObjWasGrouped)
                    ReplaceObj(*pTextObj, *pObject);
                else
                {
                    if (SdrObjKind::OLE2 == pObject->GetObjIdentifier())
                    {
                        // the size from BLIP, if there is any, should be already set
                        pRet = InsertOle(*static_cast<SdrOle2Obj*>(pObject.get()), aAttrSet, &aGrSet);
                    }
                    else
                    {
                        if (SdrGrafObj* pGraphObject = dynamic_cast<SdrGrafObj*>( pObject.get()) )
                        {
                            // Now add the link or rather the graphic to the doc
                            const Graphic& rGraph = pGraphObject->GetGraphic();

                            if (m_nObjLocFc)  // is it an OLE-Object?
                                pRet = ImportOle(&rGraph, &aAttrSet, &aGrSet, pObject->GetBLIPSizeRectangle());

                            if (!pRet)
                            {
                                pRet = m_rDoc.getIDocumentContentOperations().InsertGraphic(
                                    *m_pPaM, OUString(), OUString(),
                                    &rGraph, &aAttrSet, &aGrSet, nullptr );
                            }
                        }
                        else
                            pRet = m_rDoc.getIDocumentContentOperations().InsertDrawObj(*m_pPaM, *pObject, aAttrSet );
                    }
                }

                // only if we made an *Insert*
                if (pRet)
                {
                    if (pRecord)
                        SetAttributesAtGrfNode(*pRecord, *pRet, nullptr);

                    OUString aObjectName(pObject->GetName());
                    if (aObjectName.isEmpty() || !m_rDoc.FindFlyByName(UIName(aObjectName), GetNodeType(*pRet)))
                        pRet->SetFormatName(UIName(aObjectName));
                    else
                        m_aGrfNameGenerator.SetUniqueGraphName(pRet, aObjectName);

                    // determine the pointer to the new object and update
                    // Z-order-list accordingly (or delete entry)
                    if (SdrObject* pOurNewObject = CreateContactObject(pRet))
                    {
                        if (pOurNewObject != pObject.get())
                        {
                            m_xMSDffManager->ExchangeInShapeOrder( pObject.get(), 0,
                                pOurNewObject );

                            // delete and destroy old SdrGrafObj from page
                            if (pObject->getSdrPageFromSdrObject())
                                m_pDrawPg->RemoveObject(pObject->GetOrdNum());
                            pObject.clear();
                        }
                    }
                    else
                        m_xMSDffManager->RemoveFromShapeOrder( pObject.get() );
                }
                else
                    m_xMSDffManager->RemoveFromShapeOrder( pObject.get() );

                // also delete this from the page if not grouped
                if (pTextObj && !bTextObjWasGrouped && pTextObj->getSdrPageFromSdrObject())
                    m_pDrawPg->RemoveObject( pTextObj->GetOrdNum() );
            }
            m_xMSDffManager->EnableFallbackStream();
        }
        else if (aPic.lcb >= 58)
            pRet = ImportGraf1(aPic, m_pDataStream, m_nPicLocFc);
    }
    m_pDataStream->Seek( nOldPos );

    if (pRet)
    {
        SdrObject* pOurNewObject = CreateContactObject(pRet);
        m_xWWZOrder->InsertTextLayerObject(pOurNewObject);
    }

    return AddAutoAnchor(pRet);
}

void WW8PicShadowToReal( WW8_PIC_SHADOW const * pPicS, WW8_PIC * pPic )
{
    pPic->lcb = SVBT32ToUInt32( pPicS->lcb );
    pPic->cbHeader = SVBT16ToUInt16( pPicS->cbHeader );
    pPic->MFP.mm = SVBT16ToUInt16( pPicS->MFP.mm );
    pPic->MFP.xExt = SVBT16ToUInt16( pPicS->MFP.xExt );
    pPic->MFP.yExt = SVBT16ToUInt16( pPicS->MFP.yExt );
    pPic->MFP.hMF = SVBT16ToUInt16( pPicS->MFP.hMF );
    for( sal_uInt16 i = 0; i < 14 ; i++ )
        pPic->rcWinMF[i] = pPicS->rcWinMF[i];
    pPic->dxaGoal = SVBT16ToUInt16( pPicS->dxaGoal );
    pPic->dyaGoal = SVBT16ToUInt16( pPicS->dyaGoal );
    pPic->mx = SVBT16ToUInt16( pPicS->mx );
    pPic->my = SVBT16ToUInt16( pPicS->my );
    pPic->dxaCropLeft = SVBT16ToUInt16( pPicS->dxaCropLeft );
    pPic->dyaCropTop = SVBT16ToUInt16( pPicS->dyaCropTop );
    pPic->dxaCropRight = SVBT16ToUInt16( pPicS->dxaCropRight );
    pPic->dyaCropBottom = SVBT16ToUInt16( pPicS->dyaCropBottom );
    pPic->brcl = pPicS->aBits1 & 0x0f;
    pPic->fFrameEmpty = (pPicS->aBits1 & 0x10) >> 4;
    pPic->fBitmap = (pPicS->aBits1 & 0x20) >> 5;
    pPic->fDrawHatch = (pPicS->aBits1 & 0x40) >> 6;
    pPic->fError = (pPicS->aBits1 & 0x80) >> 7;
    pPic->bpp = pPicS->aBits2;
}

void WW8FSPAShadowToReal(const WW8_FSPA_SHADOW& rFSPAS, WW8_FSPA& rFSPA)
{
    rFSPA.nSpId = SVBT32ToUInt32(rFSPAS.nSpId);
    rFSPA.nXaLeft = SVBT32ToUInt32(rFSPAS.nXaLeft);
    rFSPA.nYaTop = SVBT32ToUInt32(rFSPAS.nYaTop);
    rFSPA.nXaRight = SVBT32ToUInt32(rFSPAS.nXaRight);
    rFSPA.nYaBottom = SVBT32ToUInt32(rFSPAS.nYaBottom);

    sal_uInt16 nBits = SVBT16ToUInt16(rFSPAS.aBits1);

    rFSPA.bHdr = sal_uInt16(0 != (nBits & 0x0001));
    rFSPA.nbx = (nBits & 0x0006) >> 1;
    rFSPA.nby = (nBits & 0x0018) >> 3;
    rFSPA.nwr = (nBits & 0x01E0) >> 5;
    rFSPA.nwrk = (nBits & 0x1E00) >> 9;
    rFSPA.bRcaSimple = sal_uInt16(0 != (nBits & 0x2000));
    rFSPA.bBelowText = sal_uInt16(0 != (nBits & 0x4000));
    rFSPA.bAnchorLock = sal_uInt16(0 != (nBits & 0x8000));
    rFSPA.nTxbx = SVBT32ToUInt32(rFSPAS.nTxbx);
}

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */