1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
|
/*
* General Purpose functions for the global management of the
* 8260 Communication Processor Module.
* Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
* Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com)
* 2.3.99 Updates
*
* In addition to the individual control of the communication
* channels, there are a few functions that globally affect the
* communication processor.
*
* Buffer descriptors must be allocated from the dual ported memory
* space. The allocator for that is here. When the communication
* process is reset, we reclaim the memory available. There is
* currently no deallocator for this memory.
*/
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mpc8260.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/cpm2.h>
#include <asm/rheap.h>
static void cpm2_dpinit(void);
cpm_cpm2_t *cpmp; /* Pointer to comm processor space */
/* We allocate this here because it is used almost exclusively for
* the communication processor devices.
*/
cpm2_map_t *cpm2_immr;
#define CPM_MAP_SIZE (0x40000) /* 256k - the PQ3 reserve this amount
of space for CPM as it is larger
than on PQ2 */
void
cpm2_reset(void)
{
cpm2_immr = (cpm2_map_t *)ioremap(CPM_MAP_ADDR, CPM_MAP_SIZE);
/* Reclaim the DP memory for our use.
*/
cpm2_dpinit();
/* Tell everyone where the comm processor resides.
*/
cpmp = &cpm2_immr->im_cpm;
}
/* Set a baud rate generator. This needs lots of work. There are
* eight BRGs, which can be connected to the CPM channels or output
* as clocks. The BRGs are in two different block of internal
* memory mapped space.
* The baud rate clock is the system clock divided by something.
* It was set up long ago during the initial boot phase and is
* is given to us.
* Baud rate clocks are zero-based in the driver code (as that maps
* to port numbers). Documentation uses 1-based numbering.
*/
#define BRG_INT_CLK (((bd_t *)__res)->bi_brgfreq)
#define BRG_UART_CLK (BRG_INT_CLK/16)
/* This function is used by UARTS, or anything else that uses a 16x
* oversampled clock.
*/
void
cpm_setbrg(uint brg, uint rate)
{
volatile uint *bp;
/* This is good enough to get SMCs running.....
*/
if (brg < 4) {
bp = (uint *)&cpm2_immr->im_brgc1;
}
else {
bp = (uint *)&cpm2_immr->im_brgc5;
brg -= 4;
}
bp += brg;
*bp = ((BRG_UART_CLK / rate) << 1) | CPM_BRG_EN;
}
/* This function is used to set high speed synchronous baud rate
* clocks.
*/
void
cpm2_fastbrg(uint brg, uint rate, int div16)
{
volatile uint *bp;
if (brg < 4) {
bp = (uint *)&cpm2_immr->im_brgc1;
}
else {
bp = (uint *)&cpm2_immr->im_brgc5;
brg -= 4;
}
bp += brg;
*bp = ((BRG_INT_CLK / rate) << 1) | CPM_BRG_EN;
if (div16)
*bp |= CPM_BRG_DIV16;
}
/*
* dpalloc / dpfree bits.
*/
static spinlock_t cpm_dpmem_lock;
/* 16 blocks should be enough to satisfy all requests
* until the memory subsystem goes up... */
static rh_block_t cpm_boot_dpmem_rh_block[16];
static rh_info_t cpm_dpmem_info;
static void cpm2_dpinit(void)
{
spin_lock_init(&cpm_dpmem_lock);
/* initialize the info header */
rh_init(&cpm_dpmem_info, 1,
sizeof(cpm_boot_dpmem_rh_block) /
sizeof(cpm_boot_dpmem_rh_block[0]),
cpm_boot_dpmem_rh_block);
/* Attach the usable dpmem area */
/* XXX: This is actually crap. CPM_DATAONLY_BASE and
* CPM_DATAONLY_SIZE is only a subset of the available dpram. It
* varies with the processor and the microcode patches activated.
* But the following should be at least safe.
*/
rh_attach_region(&cpm_dpmem_info, (void *)CPM_DATAONLY_BASE,
CPM_DATAONLY_SIZE);
}
/* This function returns an index into the DPRAM area.
*/
uint cpm_dpalloc(uint size, uint align)
{
void *start;
unsigned long flags;
spin_lock_irqsave(&cpm_dpmem_lock, flags);
cpm_dpmem_info.alignment = align;
start = rh_alloc(&cpm_dpmem_info, size, "commproc");
spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
return (uint)start;
}
EXPORT_SYMBOL(cpm_dpalloc);
int cpm_dpfree(uint offset)
{
int ret;
unsigned long flags;
spin_lock_irqsave(&cpm_dpmem_lock, flags);
ret = rh_free(&cpm_dpmem_info, (void *)offset);
spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
return ret;
}
EXPORT_SYMBOL(cpm_dpfree);
/* not sure if this is ever needed */
uint cpm_dpalloc_fixed(uint offset, uint size, uint align)
{
void *start;
unsigned long flags;
spin_lock_irqsave(&cpm_dpmem_lock, flags);
cpm_dpmem_info.alignment = align;
start = rh_alloc_fixed(&cpm_dpmem_info, (void *)offset, size, "commproc");
spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
return (uint)start;
}
EXPORT_SYMBOL(cpm_dpalloc_fixed);
void cpm_dpdump(void)
{
rh_dump(&cpm_dpmem_info);
}
EXPORT_SYMBOL(cpm_dpdump);
void *cpm_dpram_addr(uint offset)
{
return (void *)&cpm2_immr->im_dprambase[offset];
}
EXPORT_SYMBOL(cpm_dpram_addr);
|
