| 12
 3
 4
 5
 6
 7
 8
 9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
 100
 101
 102
 103
 104
 105
 106
 107
 108
 109
 110
 111
 112
 113
 114
 115
 116
 117
 118
 119
 120
 121
 122
 123
 124
 125
 126
 127
 128
 129
 130
 131
 132
 133
 134
 135
 136
 137
 138
 139
 140
 141
 142
 143
 144
 145
 146
 147
 148
 149
 150
 151
 152
 153
 154
 155
 156
 157
 158
 159
 160
 161
 162
 163
 164
 165
 166
 167
 168
 169
 170
 171
 172
 173
 174
 175
 176
 177
 178
 179
 180
 181
 182
 183
 184
 185
 186
 187
 188
 189
 190
 191
 192
 193
 194
 195
 196
 197
 198
 199
 200
 201
 202
 203
 204
 205
 206
 207
 208
 209
 210
 211
 212
 213
 214
 215
 216
 217
 218
 219
 220
 221
 222
 223
 224
 225
 226
 227
 228
 229
 230
 231
 232
 233
 234
 235
 236
 237
 238
 239
 240
 241
 242
 243
 244
 245
 246
 247
 248
 249
 250
 251
 252
 253
 254
 255
 256
 257
 258
 259
 260
 261
 262
 263
 264
 265
 266
 267
 268
 269
 270
 271
 272
 273
 274
 275
 276
 277
 278
 279
 280
 281
 282
 283
 284
 285
 286
 287
 288
 289
 290
 291
 292
 293
 294
 295
 296
 297
 298
 299
 300
 301
 302
 303
 304
 305
 306
 307
 308
 309
 310
 311
 312
 313
 314
 315
 316
 317
 318
 319
 320
 
 | /* orinoco_nortel.c
 *
 * Driver for Prism II devices which would usually be driven by orinoco_cs,
 * but are connected to the PCI bus by a PCI-to-PCMCIA adapter used in
 * Nortel emobility, Symbol LA-4113 and Symbol LA-4123.
 *
 * Copyright (C) 2002 Tobias Hoffmann
 *           (C) 2003 Christoph Jungegger <disdos@traum404.de>
 *
 * Some of this code is borrowed from orinoco_plx.c
 *	Copyright (C) 2001 Daniel Barlow
 * Some of this code is borrowed from orinoco_pci.c
 *  Copyright (C) 2001 Jean Tourrilhes
 * Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing
 * has been copied from it. linux-wlan-ng-0.1.10 is originally :
 *	Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
 *
 * The contents of this file are subject to the Mozilla Public License
 * Version 1.1 (the "License"); you may not use this file except in
 * compliance with the License. You may obtain a copy of the License
 * at http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS"
 * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
 * the License for the specific language governing rights and
 * limitations under the License.
 *
 * Alternatively, the contents of this file may be used under the
 * terms of the GNU General Public License version 2 (the "GPL"), in
 * which case the provisions of the GPL are applicable instead of the
 * above.  If you wish to allow the use of your version of this file
 * only under the terms of the GPL and not to allow others to use your
 * version of this file under the MPL, indicate your decision by
 * deleting the provisions above and replace them with the notice and
 * other provisions required by the GPL.  If you do not delete the
 * provisions above, a recipient may use your version of this file
 * under either the MPL or the GPL.
 */
#define DRIVER_NAME "orinoco_nortel"
#define PFX DRIVER_NAME ": "
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <pcmcia/cisreg.h>
#include "orinoco.h"
#include "orinoco_pci.h"
#define COR_OFFSET    (0xe0)	/* COR attribute offset of Prism2 PC card */
#define COR_VALUE     (COR_LEVEL_REQ | COR_FUNC_ENA)	/* Enable PC card with interrupt in level trigger */
/*
 * Do a soft reset of the card using the Configuration Option Register
 * We need this to get going...
 * This is the part of the code that is strongly inspired from wlan-ng
 *
 * Note bis : Don't try to access HERMES_CMD during the reset phase.
 * It just won't work !
 */
static int orinoco_nortel_cor_reset(struct orinoco_private *priv)
{
	struct orinoco_pci_card *card = priv->card;
	/* Assert the reset until the card notices */
	iowrite16(8, card->bridge_io + 2);
	ioread16(card->attr_io + COR_OFFSET);
	iowrite16(0x80, card->attr_io + COR_OFFSET);
	mdelay(1);
	/* Give time for the card to recover from this hard effort */
	iowrite16(0, card->attr_io + COR_OFFSET);
	iowrite16(0, card->attr_io + COR_OFFSET);
	mdelay(1);
	/* Set COR as usual */
	iowrite16(COR_VALUE, card->attr_io + COR_OFFSET);
	iowrite16(COR_VALUE, card->attr_io + COR_OFFSET);
	mdelay(1);
	iowrite16(0x228, card->bridge_io + 2);
	return 0;
}
static int orinoco_nortel_hw_init(struct orinoco_pci_card *card)
{
	int i;
	u32 reg;
	/* Setup bridge */
	if (ioread16(card->bridge_io) & 1) {
		printk(KERN_ERR PFX "brg1 answer1 wrong\n");
		return -EBUSY;
	}
	iowrite16(0x118, card->bridge_io + 2);
	iowrite16(0x108, card->bridge_io + 2);
	mdelay(30);
	iowrite16(0x8, card->bridge_io + 2);
	for (i = 0; i < 30; i++) {
		mdelay(30);
		if (ioread16(card->bridge_io) & 0x10)
			break;
	}
	if (i == 30) {
		printk(KERN_ERR PFX "brg1 timed out\n");
		return -EBUSY;
	}
	if (ioread16(card->attr_io + COR_OFFSET) & 1) {
		printk(KERN_ERR PFX "brg2 answer1 wrong\n");
		return -EBUSY;
	}
	if (ioread16(card->attr_io + COR_OFFSET + 2) & 1) {
		printk(KERN_ERR PFX "brg2 answer2 wrong\n");
		return -EBUSY;
	}
	if (ioread16(card->attr_io + COR_OFFSET + 4) & 1) {
		printk(KERN_ERR PFX "brg2 answer3 wrong\n");
		return -EBUSY;
	}
	/* Set the PCMCIA COR register */
	iowrite16(COR_VALUE, card->attr_io + COR_OFFSET);
	mdelay(1);
	reg = ioread16(card->attr_io + COR_OFFSET);
	if (reg != COR_VALUE) {
		printk(KERN_ERR PFX "Error setting COR value (reg=%x)\n",
		       reg);
		return -EBUSY;
	}
	/* Set LEDs */
	iowrite16(1, card->bridge_io + 10);
	return 0;
}
static int orinoco_nortel_init_one(struct pci_dev *pdev,
				   const struct pci_device_id *ent)
{
	int err;
	struct orinoco_private *priv;
	struct orinoco_pci_card *card;
	void __iomem *hermes_io, *bridge_io, *attr_io;
	err = pci_enable_device(pdev);
	if (err) {
		printk(KERN_ERR PFX "Cannot enable PCI device\n");
		return err;
	}
	err = pci_request_regions(pdev, DRIVER_NAME);
	if (err) {
		printk(KERN_ERR PFX "Cannot obtain PCI resources\n");
		goto fail_resources;
	}
	bridge_io = pci_iomap(pdev, 0, 0);
	if (!bridge_io) {
		printk(KERN_ERR PFX "Cannot map bridge registers\n");
		err = -EIO;
		goto fail_map_bridge;
	}
	attr_io = pci_iomap(pdev, 1, 0);
	if (!attr_io) {
		printk(KERN_ERR PFX "Cannot map PCMCIA attributes\n");
		err = -EIO;
		goto fail_map_attr;
	}
	hermes_io = pci_iomap(pdev, 2, 0);
	if (!hermes_io) {
		printk(KERN_ERR PFX "Cannot map chipset registers\n");
		err = -EIO;
		goto fail_map_hermes;
	}
	/* Allocate network device */
	priv = alloc_orinocodev(sizeof(*card), &pdev->dev,
				orinoco_nortel_cor_reset, NULL);
	if (!priv) {
		printk(KERN_ERR PFX "Cannot allocate network device\n");
		err = -ENOMEM;
		goto fail_alloc;
	}
	card = priv->card;
	card->bridge_io = bridge_io;
	card->attr_io = attr_io;
	hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING);
	err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
			  DRIVER_NAME, priv);
	if (err) {
		printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
		err = -EBUSY;
		goto fail_irq;
	}
	err = orinoco_nortel_hw_init(card);
	if (err) {
		printk(KERN_ERR PFX "Hardware initialization failed\n");
		goto fail;
	}
	err = orinoco_nortel_cor_reset(priv);
	if (err) {
		printk(KERN_ERR PFX "Initial reset failed\n");
		goto fail;
	}
	err = orinoco_init(priv);
	if (err) {
		printk(KERN_ERR PFX "orinoco_init() failed\n");
		goto fail;
	}
	err = orinoco_if_add(priv, 0, 0, NULL);
	if (err) {
		printk(KERN_ERR PFX "orinoco_if_add() failed\n");
		goto fail;
	}
	pci_set_drvdata(pdev, priv);
	return 0;
 fail:
	free_irq(pdev->irq, priv);
 fail_irq:
	free_orinocodev(priv);
 fail_alloc:
	pci_iounmap(pdev, hermes_io);
 fail_map_hermes:
	pci_iounmap(pdev, attr_io);
 fail_map_attr:
	pci_iounmap(pdev, bridge_io);
 fail_map_bridge:
	pci_release_regions(pdev);
 fail_resources:
	pci_disable_device(pdev);
	return err;
}
static void orinoco_nortel_remove_one(struct pci_dev *pdev)
{
	struct orinoco_private *priv = pci_get_drvdata(pdev);
	struct orinoco_pci_card *card = priv->card;
	/* Clear LEDs */
	iowrite16(0, card->bridge_io + 10);
	orinoco_if_del(priv);
	free_irq(pdev->irq, priv);
	free_orinocodev(priv);
	pci_iounmap(pdev, priv->hw.iobase);
	pci_iounmap(pdev, card->attr_io);
	pci_iounmap(pdev, card->bridge_io);
	pci_release_regions(pdev);
	pci_disable_device(pdev);
}
static DEFINE_PCI_DEVICE_TABLE(orinoco_nortel_id_table) = {
	/* Nortel emobility PCI */
	{0x126c, 0x8030, PCI_ANY_ID, PCI_ANY_ID,},
	/* Symbol LA-4123 PCI */
	{0x1562, 0x0001, PCI_ANY_ID, PCI_ANY_ID,},
	{0,},
};
MODULE_DEVICE_TABLE(pci, orinoco_nortel_id_table);
static struct pci_driver orinoco_nortel_driver = {
	.name		= DRIVER_NAME,
	.id_table	= orinoco_nortel_id_table,
	.probe		= orinoco_nortel_init_one,
	.remove		= orinoco_nortel_remove_one,
	.suspend	= orinoco_pci_suspend,
	.resume		= orinoco_pci_resume,
};
static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
	" (Tobias Hoffmann & Christoph Jungegger <disdos@traum404.de>)";
MODULE_AUTHOR("Christoph Jungegger <disdos@traum404.de>");
MODULE_DESCRIPTION("Driver for wireless LAN cards using the Nortel PCI bridge");
MODULE_LICENSE("Dual MPL/GPL");
static int __init orinoco_nortel_init(void)
{
	printk(KERN_DEBUG "%s\n", version);
	return pci_register_driver(&orinoco_nortel_driver);
}
static void __exit orinoco_nortel_exit(void)
{
	pci_unregister_driver(&orinoco_nortel_driver);
}
module_init(orinoco_nortel_init);
module_exit(orinoco_nortel_exit);
/*
 * Local variables:
 *  c-indent-level: 8
 *  c-basic-offset: 8
 *  tab-width: 8
 * End:
 */
 |