1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
|
* Abilis TB10x GPIO controller
Required Properties:
- compatible: Should be "abilis,tb10x-gpio"
- reg: Address and length of the register set for the device
- gpio-controller: Marks the device node as a gpio controller.
- #gpio-cells: Should be <2>. The first cell is the pin number and the
second cell is used to specify optional parameters:
- bit 0 specifies polarity (0 for normal, 1 for inverted).
- abilis,ngpio: the number of GPIO pins this driver controls.
Optional Properties:
- interrupt-controller: Marks the device node as an interrupt controller.
- #interrupt-cells: Should be <1>. Interrupts are triggered on both edges.
- interrupts: Defines the interrupt line connecting this GPIO controller to
its parent interrupt controller.
- interrupt-parent: Defines the parent interrupt controller.
GPIO ranges are specified as described in
Documentation/devicetree/bindings/gpio/gpio.txt
Example:
gpioa: gpio@FF140000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
reg = <0xFF140000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <3>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioa_pins";
};
|
