1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
|
/*
* Copyright (C) 2010 <LW@KARO-electronics.de>
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
#include <linux/delay.h>
#include <linux/fec.h>
#include <linux/gpio.h>
#include <mach/iomux-mx28.h>
#include "../devices-mx28.h"
#include "module-tx28.h"
#define TX28_FEC_PHY_POWER MXS_GPIO_NR(3, 29)
#define TX28_FEC_PHY_RESET MXS_GPIO_NR(4, 13)
static const iomux_cfg_t tx28_fec_gpio_pads[] __initconst = {
/* PHY POWER */
MX28_PAD_PWM4__GPIO_3_29 |
MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3,
/* PHY RESET */
MX28_PAD_ENET0_RX_CLK__GPIO_4_13 |
MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3,
/* Mode strap pins 0-2 */
MX28_PAD_ENET0_RXD0__GPIO_4_3 |
MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3,
MX28_PAD_ENET0_RXD1__GPIO_4_4 |
MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3,
MX28_PAD_ENET0_RX_EN__GPIO_4_2 |
MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3,
/* nINT */
MX28_PAD_ENET0_TX_CLK__GPIO_4_5 |
MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3,
MX28_PAD_ENET0_MDC__GPIO_4_0,
MX28_PAD_ENET0_MDIO__GPIO_4_1,
MX28_PAD_ENET0_TX_EN__GPIO_4_6,
MX28_PAD_ENET0_TXD0__GPIO_4_7,
MX28_PAD_ENET0_TXD1__GPIO_4_8,
MX28_PAD_ENET_CLK__GPIO_4_16,
};
#define FEC_MODE (MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3)
static const iomux_cfg_t tx28_fec0_pads[] __initconst = {
MX28_PAD_ENET0_MDC__ENET0_MDC | FEC_MODE,
MX28_PAD_ENET0_MDIO__ENET0_MDIO | FEC_MODE,
MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | FEC_MODE,
MX28_PAD_ENET0_RXD0__ENET0_RXD0 | FEC_MODE,
MX28_PAD_ENET0_RXD1__ENET0_RXD1 | FEC_MODE,
MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | FEC_MODE,
MX28_PAD_ENET0_TXD0__ENET0_TXD0 | FEC_MODE,
MX28_PAD_ENET0_TXD1__ENET0_TXD1 | FEC_MODE,
MX28_PAD_ENET_CLK__CLKCTRL_ENET | FEC_MODE,
};
static const iomux_cfg_t tx28_fec1_pads[] __initconst = {
MX28_PAD_ENET0_RXD2__ENET1_RXD0,
MX28_PAD_ENET0_RXD3__ENET1_RXD1,
MX28_PAD_ENET0_TXD2__ENET1_TXD0,
MX28_PAD_ENET0_TXD3__ENET1_TXD1,
MX28_PAD_ENET0_COL__ENET1_TX_EN,
MX28_PAD_ENET0_CRS__ENET1_RX_EN,
};
static const struct fec_platform_data tx28_fec0_data __initconst = {
.phy = PHY_INTERFACE_MODE_RMII,
};
static const struct fec_platform_data tx28_fec1_data __initconst = {
.phy = PHY_INTERFACE_MODE_RMII,
};
int __init tx28_add_fec0(void)
{
int i, ret;
pr_debug("%s: Switching FEC PHY power off\n", __func__);
ret = mxs_iomux_setup_multiple_pads(tx28_fec_gpio_pads,
ARRAY_SIZE(tx28_fec_gpio_pads));
for (i = 0; i < ARRAY_SIZE(tx28_fec_gpio_pads); i++) {
unsigned int gpio = MXS_GPIO_NR(PAD_BANK(tx28_fec_gpio_pads[i]),
PAD_PIN(tx28_fec_gpio_pads[i]));
ret = gpio_request(gpio, "FEC");
if (ret) {
pr_err("Failed to request GPIO_%d_%d: %d\n",
PAD_BANK(tx28_fec_gpio_pads[i]),
PAD_PIN(tx28_fec_gpio_pads[i]), ret);
goto free_gpios;
}
ret = gpio_direction_output(gpio, 0);
if (ret) {
pr_err("Failed to set direction of GPIO_%d_%d to output: %d\n",
gpio / 32 + 1, gpio % 32, ret);
goto free_gpios;
}
}
/* Power up fec phy */
pr_debug("%s: Switching FEC PHY power on\n", __func__);
ret = gpio_direction_output(TX28_FEC_PHY_POWER, 1);
if (ret) {
pr_err("Failed to power on PHY: %d\n", ret);
goto free_gpios;
}
mdelay(26); /* 25ms according to data sheet */
/* nINT */
gpio_direction_input(MXS_GPIO_NR(4, 5));
/* Mode strap pins */
gpio_direction_output(MXS_GPIO_NR(4, 2), 1);
gpio_direction_output(MXS_GPIO_NR(4, 3), 1);
gpio_direction_output(MXS_GPIO_NR(4, 4), 1);
udelay(100); /* minimum assertion time for nRST */
pr_debug("%s: Deasserting FEC PHY RESET\n", __func__);
gpio_set_value(TX28_FEC_PHY_RESET, 1);
ret = mxs_iomux_setup_multiple_pads(tx28_fec0_pads,
ARRAY_SIZE(tx28_fec0_pads));
if (ret) {
pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n",
__func__, ret);
goto free_gpios;
}
pr_debug("%s: Registering FEC0 device\n", __func__);
mx28_add_fec(0, &tx28_fec0_data);
return 0;
free_gpios:
while (--i >= 0) {
unsigned int gpio = MXS_GPIO_NR(PAD_BANK(tx28_fec_gpio_pads[i]),
PAD_PIN(tx28_fec_gpio_pads[i]));
gpio_free(gpio);
}
return ret;
}
int __init tx28_add_fec1(void)
{
int ret;
ret = mxs_iomux_setup_multiple_pads(tx28_fec1_pads,
ARRAY_SIZE(tx28_fec1_pads));
if (ret) {
pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n",
__func__, ret);
return ret;
}
pr_debug("%s: Registering FEC1 device\n", __func__);
mx28_add_fec(1, &tx28_fec1_data);
return 0;
}
|
