1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
|
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2013 Red Hat
* Author: Rob Clark <robdclark@gmail.com>
*/
#include <linux/delay.h>
#include "hdmi.h"
static void hdmi_phy_8x60_powerup(struct hdmi_phy *phy,
unsigned long int pixclock)
{
/* De-serializer delay D/C for non-lbk mode: */
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG0,
HDMI_8x60_PHY_REG0_DESER_DEL_CTRL(3));
if (pixclock == 27000000) {
/* video_format == HDMI_VFRMT_720x480p60_16_9 */
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG1,
HDMI_8x60_PHY_REG1_DTEST_MUX_SEL(5) |
HDMI_8x60_PHY_REG1_OUTVOL_SWING_CTRL(3));
} else {
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG1,
HDMI_8x60_PHY_REG1_DTEST_MUX_SEL(5) |
HDMI_8x60_PHY_REG1_OUTVOL_SWING_CTRL(4));
}
/* No matter what, start from the power down mode: */
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2,
HDMI_8x60_PHY_REG2_PD_PWRGEN |
HDMI_8x60_PHY_REG2_PD_PLL |
HDMI_8x60_PHY_REG2_PD_DRIVE_4 |
HDMI_8x60_PHY_REG2_PD_DRIVE_3 |
HDMI_8x60_PHY_REG2_PD_DRIVE_2 |
HDMI_8x60_PHY_REG2_PD_DRIVE_1 |
HDMI_8x60_PHY_REG2_PD_DESER);
/* Turn PowerGen on: */
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2,
HDMI_8x60_PHY_REG2_PD_PLL |
HDMI_8x60_PHY_REG2_PD_DRIVE_4 |
HDMI_8x60_PHY_REG2_PD_DRIVE_3 |
HDMI_8x60_PHY_REG2_PD_DRIVE_2 |
HDMI_8x60_PHY_REG2_PD_DRIVE_1 |
HDMI_8x60_PHY_REG2_PD_DESER);
/* Turn PLL power on: */
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2,
HDMI_8x60_PHY_REG2_PD_DRIVE_4 |
HDMI_8x60_PHY_REG2_PD_DRIVE_3 |
HDMI_8x60_PHY_REG2_PD_DRIVE_2 |
HDMI_8x60_PHY_REG2_PD_DRIVE_1 |
HDMI_8x60_PHY_REG2_PD_DESER);
/* Write to HIGH after PLL power down de-assert: */
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG3,
HDMI_8x60_PHY_REG3_PLL_ENABLE);
/* ASIC power on; PHY REG9 = 0 */
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG9, 0);
/* Enable PLL lock detect, PLL lock det will go high after lock
* Enable the re-time logic
*/
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG12,
HDMI_8x60_PHY_REG12_RETIMING_EN |
HDMI_8x60_PHY_REG12_PLL_LOCK_DETECT_EN);
/* Drivers are on: */
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2,
HDMI_8x60_PHY_REG2_PD_DESER);
/* If the RX detector is needed: */
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2,
HDMI_8x60_PHY_REG2_RCV_SENSE_EN |
HDMI_8x60_PHY_REG2_PD_DESER);
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG4, 0);
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG5, 0);
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG6, 0);
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG7, 0);
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG8, 0);
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG9, 0);
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG10, 0);
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG11, 0);
/* If we want to use lock enable based on counting: */
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG12,
HDMI_8x60_PHY_REG12_RETIMING_EN |
HDMI_8x60_PHY_REG12_PLL_LOCK_DETECT_EN |
HDMI_8x60_PHY_REG12_FORCE_LOCK);
}
static void hdmi_phy_8x60_powerdown(struct hdmi_phy *phy)
{
/* Assert RESET PHY from controller */
hdmi_phy_write(phy, REG_HDMI_PHY_CTRL,
HDMI_PHY_CTRL_SW_RESET);
udelay(10);
/* De-assert RESET PHY from controller */
hdmi_phy_write(phy, REG_HDMI_PHY_CTRL, 0);
/* Turn off Driver */
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2,
HDMI_8x60_PHY_REG2_PD_DRIVE_4 |
HDMI_8x60_PHY_REG2_PD_DRIVE_3 |
HDMI_8x60_PHY_REG2_PD_DRIVE_2 |
HDMI_8x60_PHY_REG2_PD_DRIVE_1 |
HDMI_8x60_PHY_REG2_PD_DESER);
udelay(10);
/* Disable PLL */
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG3, 0);
/* Power down PHY, but keep RX-sense: */
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2,
HDMI_8x60_PHY_REG2_RCV_SENSE_EN |
HDMI_8x60_PHY_REG2_PD_PWRGEN |
HDMI_8x60_PHY_REG2_PD_PLL |
HDMI_8x60_PHY_REG2_PD_DRIVE_4 |
HDMI_8x60_PHY_REG2_PD_DRIVE_3 |
HDMI_8x60_PHY_REG2_PD_DRIVE_2 |
HDMI_8x60_PHY_REG2_PD_DRIVE_1 |
HDMI_8x60_PHY_REG2_PD_DESER);
}
const struct hdmi_phy_cfg msm_hdmi_phy_8x60_cfg = {
.type = MSM_HDMI_PHY_8x60,
.powerup = hdmi_phy_8x60_powerup,
.powerdown = hdmi_phy_8x60_powerdown,
};
|
