1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326
|
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Processor capabilities determination functions.
*
* Copyright (C) xxxx the Anonymous
* Copyright (C) 1994 - 2006 Ralf Baechle
* Copyright (C) 2003, 2004 Maciej W. Rozycki
* Copyright (C) 2001, 2004, 2011, 2012 MIPS Technologies, Inc.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <asm/bugs.h>
#include <asm/cpu.h>
#include <asm/cpu-features.h>
#include <asm/cpu-type.h>
#include <asm/elf.h>
#include <asm/fpu.h>
#include <asm/mipsregs.h>
#include "fpu-probe.h"
/*
* Get the FPU Implementation/Revision.
*/
static inline unsigned long cpu_get_fpu_id(void)
{
unsigned long tmp, fpu_id;
tmp = read_c0_status();
__enable_fpu(FPU_AS_IS);
fpu_id = read_32bit_cp1_register(CP1_REVISION);
write_c0_status(tmp);
return fpu_id;
}
/*
* Check if the CPU has an external FPU.
*/
int __cpu_has_fpu(void)
{
return (cpu_get_fpu_id() & FPIR_IMP_MASK) != FPIR_IMP_NONE;
}
/*
* Determine the FCSR mask for FPU hardware.
*/
static inline void cpu_set_fpu_fcsr_mask(struct cpuinfo_mips *c)
{
unsigned long sr, mask, fcsr, fcsr0, fcsr1;
fcsr = c->fpu_csr31;
mask = FPU_CSR_ALL_X | FPU_CSR_ALL_E | FPU_CSR_ALL_S | FPU_CSR_RM;
sr = read_c0_status();
__enable_fpu(FPU_AS_IS);
fcsr0 = fcsr & mask;
write_32bit_cp1_register(CP1_STATUS, fcsr0);
fcsr0 = read_32bit_cp1_register(CP1_STATUS);
fcsr1 = fcsr | ~mask;
write_32bit_cp1_register(CP1_STATUS, fcsr1);
fcsr1 = read_32bit_cp1_register(CP1_STATUS);
write_32bit_cp1_register(CP1_STATUS, fcsr);
write_c0_status(sr);
c->fpu_msk31 = ~(fcsr0 ^ fcsr1) & ~mask;
}
/*
* Determine the IEEE 754 NaN encodings and ABS.fmt/NEG.fmt execution modes
* supported by FPU hardware.
*/
static void cpu_set_fpu_2008(struct cpuinfo_mips *c)
{
if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 |
MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) {
unsigned long sr, fir, fcsr, fcsr0, fcsr1;
sr = read_c0_status();
__enable_fpu(FPU_AS_IS);
fir = read_32bit_cp1_register(CP1_REVISION);
if (fir & MIPS_FPIR_HAS2008) {
fcsr = read_32bit_cp1_register(CP1_STATUS);
/*
* MAC2008 toolchain never landed in real world, so
* we're only testing whether it can be disabled and
* don't try to enabled it.
*/
fcsr0 = fcsr & ~(FPU_CSR_ABS2008 | FPU_CSR_NAN2008 |
FPU_CSR_MAC2008);
write_32bit_cp1_register(CP1_STATUS, fcsr0);
fcsr0 = read_32bit_cp1_register(CP1_STATUS);
fcsr1 = fcsr | FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
write_32bit_cp1_register(CP1_STATUS, fcsr1);
fcsr1 = read_32bit_cp1_register(CP1_STATUS);
write_32bit_cp1_register(CP1_STATUS, fcsr);
if (c->isa_level & (MIPS_CPU_ISA_M32R2 |
MIPS_CPU_ISA_M64R2)) {
/*
* The bit for MAC2008 might be reused by R6
* in future, so we only test for R2-R5.
*/
if (fcsr0 & FPU_CSR_MAC2008)
c->options |= MIPS_CPU_MAC_2008_ONLY;
}
if (!(fcsr0 & FPU_CSR_NAN2008))
c->options |= MIPS_CPU_NAN_LEGACY;
if (fcsr1 & FPU_CSR_NAN2008)
c->options |= MIPS_CPU_NAN_2008;
if ((fcsr0 ^ fcsr1) & FPU_CSR_ABS2008)
c->fpu_msk31 &= ~FPU_CSR_ABS2008;
else
c->fpu_csr31 |= fcsr & FPU_CSR_ABS2008;
if ((fcsr0 ^ fcsr1) & FPU_CSR_NAN2008)
c->fpu_msk31 &= ~FPU_CSR_NAN2008;
else
c->fpu_csr31 |= fcsr & FPU_CSR_NAN2008;
} else {
c->options |= MIPS_CPU_NAN_LEGACY;
}
write_c0_status(sr);
} else {
c->options |= MIPS_CPU_NAN_LEGACY;
}
}
/*
* IEEE 754 conformance mode to use. Affects the NaN encoding and the
* ABS.fmt/NEG.fmt execution mode.
*/
enum ieee754_mode { STRICT, LEGACY, STD2008, RELAXED };
#ifdef CONFIG_CPU_LOONGSON64
static enum ieee754_mode ieee754 = RELAXED;
#else
static enum ieee754_mode ieee754 = STRICT;
#endif
/*
* Set the IEEE 754 NaN encodings and the ABS.fmt/NEG.fmt execution modes
* to support by the FPU emulator according to the IEEE 754 conformance
* mode selected. Note that "relaxed" straps the emulator so that it
* allows 2008-NaN binaries even for legacy processors.
*/
static void cpu_set_nofpu_2008(struct cpuinfo_mips *c)
{
c->options &= ~(MIPS_CPU_NAN_2008 | MIPS_CPU_NAN_LEGACY);
c->fpu_csr31 &= ~(FPU_CSR_ABS2008 | FPU_CSR_NAN2008);
c->fpu_msk31 &= ~(FPU_CSR_ABS2008 | FPU_CSR_NAN2008);
switch (ieee754) {
case STRICT:
if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 |
MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) {
c->options |= MIPS_CPU_NAN_2008 | MIPS_CPU_NAN_LEGACY;
} else {
c->options |= MIPS_CPU_NAN_LEGACY;
c->fpu_msk31 |= FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
}
break;
case LEGACY:
c->options |= MIPS_CPU_NAN_LEGACY;
c->fpu_msk31 |= FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
break;
case STD2008:
c->options |= MIPS_CPU_NAN_2008;
c->fpu_csr31 |= FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
c->fpu_msk31 |= FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
break;
case RELAXED:
c->options |= MIPS_CPU_NAN_2008 | MIPS_CPU_NAN_LEGACY;
break;
}
}
/*
* Override the IEEE 754 NaN encoding and ABS.fmt/NEG.fmt execution mode
* according to the "ieee754=" parameter.
*/
static void cpu_set_nan_2008(struct cpuinfo_mips *c)
{
switch (ieee754) {
case STRICT:
mips_use_nan_legacy = !!cpu_has_nan_legacy;
mips_use_nan_2008 = !!cpu_has_nan_2008;
break;
case LEGACY:
mips_use_nan_legacy = !!cpu_has_nan_legacy;
mips_use_nan_2008 = !cpu_has_nan_legacy;
break;
case STD2008:
mips_use_nan_legacy = !cpu_has_nan_2008;
mips_use_nan_2008 = !!cpu_has_nan_2008;
break;
case RELAXED:
mips_use_nan_legacy = true;
mips_use_nan_2008 = true;
break;
}
}
/*
* IEEE 754 NaN encoding and ABS.fmt/NEG.fmt execution mode override
* settings:
*
* strict: accept binaries that request a NaN encoding supported by the FPU
* legacy: only accept legacy-NaN binaries
* 2008: only accept 2008-NaN binaries
* relaxed: accept any binaries regardless of whether supported by the FPU
*/
static int __init ieee754_setup(char *s)
{
if (!s)
return -1;
else if (!strcmp(s, "strict"))
ieee754 = STRICT;
else if (!strcmp(s, "legacy"))
ieee754 = LEGACY;
else if (!strcmp(s, "2008"))
ieee754 = STD2008;
else if (!strcmp(s, "relaxed"))
ieee754 = RELAXED;
else
return -1;
if (!(boot_cpu_data.options & MIPS_CPU_FPU))
cpu_set_nofpu_2008(&boot_cpu_data);
cpu_set_nan_2008(&boot_cpu_data);
return 0;
}
early_param("ieee754", ieee754_setup);
/*
* Set the FIR feature flags for the FPU emulator.
*/
static void cpu_set_nofpu_id(struct cpuinfo_mips *c)
{
u32 value;
value = 0;
if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 |
MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6))
value |= MIPS_FPIR_D | MIPS_FPIR_S;
if (c->isa_level & (MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 |
MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6))
value |= MIPS_FPIR_F64 | MIPS_FPIR_L | MIPS_FPIR_W;
if (c->options & MIPS_CPU_NAN_2008)
value |= MIPS_FPIR_HAS2008;
c->fpu_id = value;
}
/* Determined FPU emulator mask to use for the boot CPU with "nofpu". */
static unsigned int mips_nofpu_msk31;
/*
* Set options for FPU hardware.
*/
void cpu_set_fpu_opts(struct cpuinfo_mips *c)
{
c->fpu_id = cpu_get_fpu_id();
mips_nofpu_msk31 = c->fpu_msk31;
if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 |
MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) {
if (c->fpu_id & MIPS_FPIR_3D)
c->ases |= MIPS_ASE_MIPS3D;
if (c->fpu_id & MIPS_FPIR_UFRP)
c->options |= MIPS_CPU_UFR;
if (c->fpu_id & MIPS_FPIR_FREP)
c->options |= MIPS_CPU_FRE;
}
cpu_set_fpu_fcsr_mask(c);
cpu_set_fpu_2008(c);
cpu_set_nan_2008(c);
}
/*
* Set options for the FPU emulator.
*/
void cpu_set_nofpu_opts(struct cpuinfo_mips *c)
{
c->options &= ~MIPS_CPU_FPU;
c->fpu_msk31 = mips_nofpu_msk31;
cpu_set_nofpu_2008(c);
cpu_set_nan_2008(c);
cpu_set_nofpu_id(c);
}
int mips_fpu_disabled;
static int __init fpu_disable(char *s)
{
cpu_set_nofpu_opts(&boot_cpu_data);
mips_fpu_disabled = 1;
return 1;
}
__setup("nofpu", fpu_disable);
|