1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
|
// SPDX-License-Identifier: GPL-2.0
#include "bcm2835-rpi.dtsi"
#include <dt-bindings/reset/raspberrypi,firmware-reset.h>
/ {
/* Will be filled by the bootloader */
memory@0 {
device_type = "memory";
reg = <0 0 0>;
};
aliases {
emmc2bus = &emmc2bus;
ethernet0 = &genet;
pcie0 = &pcie0;
blconfig = &blconfig;
};
};
&firmware {
firmware_clocks: clocks {
compatible = "raspberrypi,firmware-clocks";
#clock-cells = <1>;
};
expgpio: gpio {
compatible = "raspberrypi,firmware-gpio";
gpio-controller;
#gpio-cells = <2>;
status = "okay";
};
reset: reset {
compatible = "raspberrypi,firmware-reset";
#reset-cells = <1>;
};
};
&hdmi0 {
clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>;
clock-names = "hdmi", "bvb", "audio", "cec";
wifi-2.4ghz-coexistence;
};
&hdmi1 {
clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
clock-names = "hdmi", "bvb", "audio", "cec";
wifi-2.4ghz-coexistence;
};
&hvs {
clocks = <&firmware_clocks 4>;
};
&rmem {
/*
* RPi4's co-processor will copy the board's bootloader configuration
* into memory for the OS to consume. It'll also update this node with
* its placement information.
*/
blconfig: nvram@0 {
compatible = "raspberrypi,bootloader-config", "nvmem-rmem";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x0 0x0 0x0>;
no-map;
status = "disabled";
};
};
&v3d {
clocks = <&firmware_clocks 5>;
};
&vchiq {
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
};
|
