1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr3-timings.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: LPDDR3 SDRAM AC timing parameters for a given speed-bin
maintainers:
- Krzysztof Kozlowski <krzk@kernel.org>
properties:
compatible:
const: jedec,lpddr3-timings
reg:
maxItems: 1
description: |
Maximum DDR clock frequency for the speed-bin, in Hz.
Property is deprecated, use max-freq.
deprecated: true
max-freq:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Maximum DDR clock frequency for the speed-bin, in Hz.
min-freq:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Minimum DDR clock frequency for the speed-bin, in Hz.
tCKE:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
CKE minimum pulse width (HIGH and LOW pulse width) in pico seconds.
tCKESR:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
CKE minimum pulse width during SELF REFRESH (low pulse width during
SELF REFRESH) in pico seconds.
tFAW:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Four-bank activate window in pico seconds.
tMRD:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Mode register set command delay in pico seconds.
tR2R-C2C:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Additional READ-to-READ delay in chip-to-chip cases in pico seconds.
tRAS:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Row active time in pico seconds.
tRC:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
ACTIVATE-to-ACTIVATE command period in pico seconds.
tRCD:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
RAS-to-CAS delay in pico seconds.
tRFC:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Refresh Cycle time in pico seconds.
tRPab:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Row precharge time (all banks) in pico seconds.
tRPpb:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Row precharge time (single banks) in pico seconds.
tRRD:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Active bank A to active bank B in pico seconds.
tRTP:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Internal READ to PRECHARGE command delay in pico seconds.
tW2W-C2C:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Additional WRITE-to-WRITE delay in chip-to-chip cases in pico seconds.
tWR:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
WRITE recovery time in pico seconds.
tWTR:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Internal WRITE-to-READ command delay in pico seconds.
tXP:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Exit power-down to next valid command delay in pico seconds.
tXSR:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
SELF REFRESH exit to next valid command delay in pico seconds.
required:
- compatible
- min-freq
- max-freq
additionalProperties: false
examples:
- |
lpddr3 {
timings {
compatible = "jedec,lpddr3-timings";
max-freq = <800000000>;
min-freq = <100000000>;
tCKE = <3750>;
tCKESR = <3750>;
tFAW = <25000>;
tMRD = <7000>;
tR2R-C2C = <0>;
tRAS = <23000>;
tRC = <33750>;
tRCD = <10000>;
tRFC = <65000>;
tRPab = <12000>;
tRPpb = <12000>;
tRRD = <6000>;
tRTP = <3750>;
tW2W-C2C = <0>;
tWR = <7500>;
tWTR = <3750>;
tXP = <3750>;
tXSR = <70000>;
};
};
|
