1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253
|
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
# Copyright 2022 NXP
# The script is mostly generic, with the exception of the
# ethtool per-TC counter names ("rx_green_prio_${tc}")
WAIT_TIME=1
NUM_NETIFS=4
STABLE_MAC_ADDRS=yes
NETIF_CREATE=no
lib_dir=$(dirname $0)/../../../net/forwarding
source $lib_dir/tc_common.sh
source $lib_dir/lib.sh
require_command dcb
h1=${NETIFS[p1]}
swp1=${NETIFS[p2]}
swp2=${NETIFS[p3]}
h2=${NETIFS[p4]}
H1_IPV4="192.0.2.1"
H2_IPV4="192.0.2.2"
H1_IPV6="2001:db8:1::1"
H2_IPV6="2001:db8:1::2"
h1_create()
{
simple_if_init $h1 $H1_IPV4/24 $H1_IPV6/64
}
h1_destroy()
{
simple_if_fini $h1 $H1_IPV4/24 $H1_IPV6/64
}
h2_create()
{
simple_if_init $h2 $H2_IPV4/24 $H2_IPV6/64
}
h2_destroy()
{
simple_if_fini $h2 $H2_IPV4/24 $H2_IPV6/64
}
h1_vlan_create()
{
local vid=$1
vlan_create $h1 $vid
simple_if_init $h1.$vid $H1_IPV4/24 $H1_IPV6/64
ip link set $h1.$vid type vlan \
egress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 \
ingress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7
}
h1_vlan_destroy()
{
local vid=$1
simple_if_fini $h1.$vid $H1_IPV4/24 $H1_IPV6/64
vlan_destroy $h1 $vid
}
h2_vlan_create()
{
local vid=$1
vlan_create $h2 $vid
simple_if_init $h2.$vid $H2_IPV4/24 $H2_IPV6/64
ip link set $h2.$vid type vlan \
egress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 \
ingress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7
}
h2_vlan_destroy()
{
local vid=$1
simple_if_fini $h2.$vid $H2_IPV4/24 $H2_IPV6/64
vlan_destroy $h2 $vid
}
vlans_prepare()
{
h1_vlan_create 100
h2_vlan_create 100
tc qdisc add dev ${h1}.100 clsact
tc filter add dev ${h1}.100 egress protocol ipv4 \
flower ip_proto icmp action skbedit priority 3
tc filter add dev ${h1}.100 egress protocol ipv6 \
flower ip_proto icmpv6 action skbedit priority 3
}
vlans_destroy()
{
tc qdisc del dev ${h1}.100 clsact
h1_vlan_destroy 100
h2_vlan_destroy 100
}
switch_create()
{
ip link set ${swp1} up
ip link set ${swp2} up
# Ports should trust VLAN PCP even with vlan_filtering=0
ip link add br0 type bridge
ip link set ${swp1} master br0
ip link set ${swp2} master br0
ip link set br0 up
}
switch_destroy()
{
ip link del br0
}
setup_prepare()
{
vrf_prepare
h1_create
h2_create
switch_create
}
cleanup()
{
pre_cleanup
h2_destroy
h1_destroy
switch_destroy
vrf_cleanup
}
dscp_cs_to_tos()
{
local dscp_cs=$1
# https://datatracker.ietf.org/doc/html/rfc2474
# 4.2.2.1 The Class Selector Codepoints
echo $((${dscp_cs} << 5))
}
run_test()
{
local test_name=$1; shift
local if_name=$1; shift
local tc=$1; shift
local tos=$1; shift
local counter_name="rx_green_prio_${tc}"
local ipv4_before
local ipv4_after
local ipv6_before
local ipv6_after
ipv4_before=$(ethtool_stats_get ${swp1} "${counter_name}")
ping_do ${if_name} $H2_IPV4 "-Q ${tos}"
ipv4_after=$(ethtool_stats_get ${swp1} "${counter_name}")
if [ $((${ipv4_after} - ${ipv4_before})) -lt ${PING_COUNT} ]; then
RET=1
else
RET=0
fi
log_test "IPv4 ${test_name}"
ipv6_before=$(ethtool_stats_get ${swp1} "${counter_name}")
ping_do ${if_name} $H2_IPV6 "-Q ${tos}"
ipv6_after=$(ethtool_stats_get ${swp1} "${counter_name}")
if [ $((${ipv6_after} - ${ipv6_before})) -lt ${PING_COUNT} ]; then
RET=1
else
RET=0
fi
log_test "IPv6 ${test_name}"
}
port_default_prio_get()
{
local if_name=$1
local prio
prio="$(dcb -j app show dev ${if_name} default-prio | \
jq '.default_prio[]')"
if [ -z "${prio}" ]; then
prio=0
fi
echo ${prio}
}
test_port_default()
{
local orig=$(port_default_prio_get ${swp1})
local dmac=$(mac_get ${h2})
dcb app replace dev ${swp1} default-prio 5
run_test "Port-default QoS classification" ${h1} 5 0
dcb app replace dev ${swp1} default-prio ${orig}
}
test_vlan_pcp()
{
vlans_prepare
run_test "Trusted VLAN PCP QoS classification" ${h1}.100 3 0
vlans_destroy
}
test_ip_dscp()
{
local port_default=$(port_default_prio_get ${swp1})
local tos=$(dscp_cs_to_tos 4)
dcb app add dev ${swp1} dscp-prio CS4:4
run_test "Trusted DSCP QoS classification" ${h1} 4 ${tos}
dcb app del dev ${swp1} dscp-prio CS4:4
vlans_prepare
run_test "Untrusted DSCP QoS classification follows VLAN PCP" \
${h1}.100 3 ${tos}
vlans_destroy
run_test "Untrusted DSCP QoS classification follows port default" \
${h1} ${port_default} ${tos}
}
trap cleanup EXIT
ALL_TESTS="
test_port_default
test_vlan_pcp
test_ip_dscp
"
setup_prepare
setup_wait
tests_run
exit $EXIT_STATUS
|