1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
|
// SPDX-License-Identifier: GPL-2.0-only
// Copyright (C) 2014 Broadcom Corporation
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/clkdev.h>
#include <linux/of_address.h>
#include <linux/delay.h>
#include <dt-bindings/clock/bcm-cygnus.h>
#include "clk-iproc.h"
#define REG_VAL(o, s, w) { .offset = o, .shift = s, .width = w, }
#define AON_VAL(o, pw, ps, is) { .offset = o, .pwr_width = pw, \
.pwr_shift = ps, .iso_shift = is }
#define SW_CTRL_VAL(o, s) { .offset = o, .shift = s, }
#define ASIU_DIV_VAL(o, es, hs, hw, ls, lw) \
{ .offset = o, .en_shift = es, .high_shift = hs, \
.high_width = hw, .low_shift = ls, .low_width = lw }
#define RESET_VAL(o, rs, prs) { .offset = o, .reset_shift = rs, \
.p_reset_shift = prs }
#define DF_VAL(o, kis, kiw, kps, kpw, kas, kaw) { .offset = o, .ki_shift = kis,\
.ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas, \
.ka_width = kaw }
#define VCO_CTRL_VAL(uo, lo) { .u_offset = uo, .l_offset = lo }
#define ENABLE_VAL(o, es, hs, bs) { .offset = o, .enable_shift = es, \
.hold_shift = hs, .bypass_shift = bs }
#define ASIU_GATE_VAL(o, es) { .offset = o, .en_shift = es }
static void __init cygnus_armpll_init(struct device_node *node)
{
iproc_armpll_setup(node);
}
CLK_OF_DECLARE(cygnus_armpll, "brcm,cygnus-armpll", cygnus_armpll_init);
static const struct iproc_pll_ctrl genpll = {
.flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
IPROC_CLK_PLL_NEEDS_SW_CFG,
.aon = AON_VAL(0x0, 2, 1, 0),
.reset = RESET_VAL(0x0, 11, 10),
.dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
.sw_ctrl = SW_CTRL_VAL(0x10, 31),
.ndiv_int = REG_VAL(0x10, 20, 10),
.ndiv_frac = REG_VAL(0x10, 0, 20),
.pdiv = REG_VAL(0x14, 0, 4),
.vco_ctrl = VCO_CTRL_VAL(0x18, 0x1c),
.status = REG_VAL(0x28, 12, 1),
};
static const struct iproc_clk_ctrl genpll_clk[] = {
[BCM_CYGNUS_GENPLL_AXI21_CLK] = {
.channel = BCM_CYGNUS_GENPLL_AXI21_CLK,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x4, 6, 0, 12),
.mdiv = REG_VAL(0x20, 0, 8),
},
[BCM_CYGNUS_GENPLL_250MHZ_CLK] = {
.channel = BCM_CYGNUS_GENPLL_250MHZ_CLK,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x4, 7, 1, 13),
.mdiv = REG_VAL(0x20, 10, 8),
},
[BCM_CYGNUS_GENPLL_IHOST_SYS_CLK] = {
.channel = BCM_CYGNUS_GENPLL_IHOST_SYS_CLK,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x4, 8, 2, 14),
.mdiv = REG_VAL(0x20, 20, 8),
},
[BCM_CYGNUS_GENPLL_ENET_SW_CLK] = {
.channel = BCM_CYGNUS_GENPLL_ENET_SW_CLK,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x4, 9, 3, 15),
.mdiv = REG_VAL(0x24, 0, 8),
},
[BCM_CYGNUS_GENPLL_AUDIO_125_CLK] = {
.channel = BCM_CYGNUS_GENPLL_AUDIO_125_CLK,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x4, 10, 4, 16),
.mdiv = REG_VAL(0x24, 10, 8),
},
[BCM_CYGNUS_GENPLL_CAN_CLK] = {
.channel = BCM_CYGNUS_GENPLL_CAN_CLK,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x4, 11, 5, 17),
.mdiv = REG_VAL(0x24, 20, 8),
},
};
static void __init cygnus_genpll_clk_init(struct device_node *node)
{
iproc_pll_clk_setup(node, &genpll, NULL, 0, genpll_clk,
ARRAY_SIZE(genpll_clk));
}
CLK_OF_DECLARE(cygnus_genpll, "brcm,cygnus-genpll", cygnus_genpll_clk_init);
static const struct iproc_pll_ctrl lcpll0 = {
.flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG,
.aon = AON_VAL(0x0, 2, 5, 4),
.reset = RESET_VAL(0x0, 31, 30),
.dig_filter = DF_VAL(0x0, 27, 3, 23, 4, 19, 4),
.sw_ctrl = SW_CTRL_VAL(0x4, 31),
.ndiv_int = REG_VAL(0x4, 16, 10),
.pdiv = REG_VAL(0x4, 26, 4),
.vco_ctrl = VCO_CTRL_VAL(0x10, 0x14),
.status = REG_VAL(0x18, 12, 1),
};
static const struct iproc_clk_ctrl lcpll0_clk[] = {
[BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK] = {
.channel = BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x0, 7, 1, 13),
.mdiv = REG_VAL(0x8, 0, 8),
},
[BCM_CYGNUS_LCPLL0_DDR_PHY_CLK] = {
.channel = BCM_CYGNUS_LCPLL0_DDR_PHY_CLK,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x0, 8, 2, 14),
.mdiv = REG_VAL(0x8, 10, 8),
},
[BCM_CYGNUS_LCPLL0_SDIO_CLK] = {
.channel = BCM_CYGNUS_LCPLL0_SDIO_CLK,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x0, 9, 3, 15),
.mdiv = REG_VAL(0x8, 20, 8),
},
[BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK] = {
.channel = BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x0, 10, 4, 16),
.mdiv = REG_VAL(0xc, 0, 8),
},
[BCM_CYGNUS_LCPLL0_SMART_CARD_CLK] = {
.channel = BCM_CYGNUS_LCPLL0_SMART_CARD_CLK,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x0, 11, 5, 17),
.mdiv = REG_VAL(0xc, 10, 8),
},
[BCM_CYGNUS_LCPLL0_CH5_UNUSED] = {
.channel = BCM_CYGNUS_LCPLL0_CH5_UNUSED,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x0, 12, 6, 18),
.mdiv = REG_VAL(0xc, 20, 8),
},
};
static void __init cygnus_lcpll0_clk_init(struct device_node *node)
{
iproc_pll_clk_setup(node, &lcpll0, NULL, 0, lcpll0_clk,
ARRAY_SIZE(lcpll0_clk));
}
CLK_OF_DECLARE(cygnus_lcpll0, "brcm,cygnus-lcpll0", cygnus_lcpll0_clk_init);
/*
* MIPI PLL VCO frequency parameter table
*/
static const struct iproc_pll_vco_param mipipll_vco_params[] = {
/* rate (Hz) ndiv_int ndiv_frac pdiv */
{ 750000000UL, 30, 0, 1 },
{ 1000000000UL, 40, 0, 1 },
{ 1350000000ul, 54, 0, 1 },
{ 2000000000UL, 80, 0, 1 },
{ 2100000000UL, 84, 0, 1 },
{ 2250000000UL, 90, 0, 1 },
{ 2500000000UL, 100, 0, 1 },
{ 2700000000UL, 54, 0, 0 },
{ 2975000000UL, 119, 0, 1 },
{ 3100000000UL, 124, 0, 1 },
{ 3150000000UL, 126, 0, 1 },
};
static const struct iproc_pll_ctrl mipipll = {
.flags = IPROC_CLK_PLL_ASIU | IPROC_CLK_PLL_HAS_NDIV_FRAC |
IPROC_CLK_NEEDS_READ_BACK,
.aon = AON_VAL(0x0, 4, 17, 16),
.asiu = ASIU_GATE_VAL(0x0, 3),
.reset = RESET_VAL(0x0, 11, 10),
.dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 4),
.ndiv_int = REG_VAL(0x10, 20, 10),
.ndiv_frac = REG_VAL(0x10, 0, 20),
.pdiv = REG_VAL(0x14, 0, 4),
.vco_ctrl = VCO_CTRL_VAL(0x18, 0x1c),
.status = REG_VAL(0x28, 12, 1),
};
static const struct iproc_clk_ctrl mipipll_clk[] = {
[BCM_CYGNUS_MIPIPLL_CH0_UNUSED] = {
.channel = BCM_CYGNUS_MIPIPLL_CH0_UNUSED,
.flags = IPROC_CLK_NEEDS_READ_BACK,
.enable = ENABLE_VAL(0x4, 12, 6, 18),
.mdiv = REG_VAL(0x20, 0, 8),
},
[BCM_CYGNUS_MIPIPLL_CH1_LCD] = {
.channel = BCM_CYGNUS_MIPIPLL_CH1_LCD,
.flags = IPROC_CLK_NEEDS_READ_BACK,
.enable = ENABLE_VAL(0x4, 13, 7, 19),
.mdiv = REG_VAL(0x20, 10, 8),
},
[BCM_CYGNUS_MIPIPLL_CH2_V3D] = {
.channel = BCM_CYGNUS_MIPIPLL_CH2_V3D,
.flags = IPROC_CLK_NEEDS_READ_BACK,
.enable = ENABLE_VAL(0x4, 14, 8, 20),
.mdiv = REG_VAL(0x20, 20, 8),
},
[BCM_CYGNUS_MIPIPLL_CH3_UNUSED] = {
.channel = BCM_CYGNUS_MIPIPLL_CH3_UNUSED,
.flags = IPROC_CLK_NEEDS_READ_BACK,
.enable = ENABLE_VAL(0x4, 15, 9, 21),
.mdiv = REG_VAL(0x24, 0, 8),
},
[BCM_CYGNUS_MIPIPLL_CH4_UNUSED] = {
.channel = BCM_CYGNUS_MIPIPLL_CH4_UNUSED,
.flags = IPROC_CLK_NEEDS_READ_BACK,
.enable = ENABLE_VAL(0x4, 16, 10, 22),
.mdiv = REG_VAL(0x24, 10, 8),
},
[BCM_CYGNUS_MIPIPLL_CH5_UNUSED] = {
.channel = BCM_CYGNUS_MIPIPLL_CH5_UNUSED,
.flags = IPROC_CLK_NEEDS_READ_BACK,
.enable = ENABLE_VAL(0x4, 17, 11, 23),
.mdiv = REG_VAL(0x24, 20, 8),
},
};
static void __init cygnus_mipipll_clk_init(struct device_node *node)
{
iproc_pll_clk_setup(node, &mipipll, mipipll_vco_params,
ARRAY_SIZE(mipipll_vco_params), mipipll_clk,
ARRAY_SIZE(mipipll_clk));
}
CLK_OF_DECLARE(cygnus_mipipll, "brcm,cygnus-mipipll", cygnus_mipipll_clk_init);
static const struct iproc_asiu_div asiu_div[] = {
[BCM_CYGNUS_ASIU_KEYPAD_CLK] = ASIU_DIV_VAL(0x0, 31, 16, 10, 0, 10),
[BCM_CYGNUS_ASIU_ADC_CLK] = ASIU_DIV_VAL(0x4, 31, 16, 10, 0, 10),
[BCM_CYGNUS_ASIU_PWM_CLK] = ASIU_DIV_VAL(0x8, 31, 16, 10, 0, 10),
};
static const struct iproc_asiu_gate asiu_gate[] = {
[BCM_CYGNUS_ASIU_KEYPAD_CLK] = ASIU_GATE_VAL(0x0, 7),
[BCM_CYGNUS_ASIU_ADC_CLK] = ASIU_GATE_VAL(0x0, 9),
[BCM_CYGNUS_ASIU_PWM_CLK] = ASIU_GATE_VAL(IPROC_CLK_INVALID_OFFSET, 0),
};
static void __init cygnus_asiu_init(struct device_node *node)
{
iproc_asiu_setup(node, asiu_div, asiu_gate, ARRAY_SIZE(asiu_div));
}
CLK_OF_DECLARE(cygnus_asiu_clk, "brcm,cygnus-asiu-clk", cygnus_asiu_init);
static const struct iproc_pll_ctrl audiopll = {
.flags = IPROC_CLK_PLL_NEEDS_SW_CFG | IPROC_CLK_PLL_HAS_NDIV_FRAC |
IPROC_CLK_PLL_USER_MODE_ON | IPROC_CLK_PLL_RESET_ACTIVE_LOW |
IPROC_CLK_PLL_CALC_PARAM,
.reset = RESET_VAL(0x5c, 0, 1),
.dig_filter = DF_VAL(0x48, 0, 3, 6, 4, 3, 3),
.sw_ctrl = SW_CTRL_VAL(0x4, 0),
.ndiv_int = REG_VAL(0x8, 0, 10),
.ndiv_frac = REG_VAL(0x8, 10, 20),
.pdiv = REG_VAL(0x44, 0, 4),
.vco_ctrl = VCO_CTRL_VAL(0x0c, 0x10),
.status = REG_VAL(0x54, 0, 1),
.macro_mode = REG_VAL(0x0, 0, 3),
};
static const struct iproc_clk_ctrl audiopll_clk[] = {
[BCM_CYGNUS_AUDIOPLL_CH0] = {
.channel = BCM_CYGNUS_AUDIOPLL_CH0,
.flags = IPROC_CLK_AON | IPROC_CLK_MCLK_DIV_BY_2,
.enable = ENABLE_VAL(0x14, 8, 10, 9),
.mdiv = REG_VAL(0x14, 0, 8),
},
[BCM_CYGNUS_AUDIOPLL_CH1] = {
.channel = BCM_CYGNUS_AUDIOPLL_CH1,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x18, 8, 10, 9),
.mdiv = REG_VAL(0x18, 0, 8),
},
[BCM_CYGNUS_AUDIOPLL_CH2] = {
.channel = BCM_CYGNUS_AUDIOPLL_CH2,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x1c, 8, 10, 9),
.mdiv = REG_VAL(0x1c, 0, 8),
},
};
static void __init cygnus_audiopll_clk_init(struct device_node *node)
{
iproc_pll_clk_setup(node, &audiopll, NULL, 0,
audiopll_clk, ARRAY_SIZE(audiopll_clk));
}
CLK_OF_DECLARE(cygnus_audiopll, "brcm,cygnus-audiopll",
cygnus_audiopll_clk_init);
|
