1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Support for ON Semiconductor NOA1305 ambient light sensor
*
* Copyright (C) 2016 Emcraft Systems
* Copyright (C) 2019 Collabora Ltd.
*/
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#define NOA1305_REG_POWER_CONTROL 0x0
#define NOA1305_POWER_CONTROL_DOWN 0x00
#define NOA1305_POWER_CONTROL_ON 0x08
#define NOA1305_REG_RESET 0x1
#define NOA1305_RESET_RESET 0x10
#define NOA1305_REG_INTEGRATION_TIME 0x2
#define NOA1305_INTEGR_TIME_800MS 0x00
#define NOA1305_INTEGR_TIME_400MS 0x01
#define NOA1305_INTEGR_TIME_200MS 0x02
#define NOA1305_INTEGR_TIME_100MS 0x03
#define NOA1305_INTEGR_TIME_50MS 0x04
#define NOA1305_INTEGR_TIME_25MS 0x05
#define NOA1305_INTEGR_TIME_12_5MS 0x06
#define NOA1305_INTEGR_TIME_6_25MS 0x07
#define NOA1305_REG_INT_SELECT 0x3
#define NOA1305_INT_SEL_ACTIVE_HIGH 0x01
#define NOA1305_INT_SEL_ACTIVE_LOW 0x02
#define NOA1305_INT_SEL_INACTIVE 0x03
#define NOA1305_REG_INT_THRESH_LSB 0x4
#define NOA1305_REG_INT_THRESH_MSB 0x5
#define NOA1305_REG_ALS_DATA_LSB 0x6
#define NOA1305_REG_ALS_DATA_MSB 0x7
#define NOA1305_REG_DEVICE_ID_LSB 0x8
#define NOA1305_REG_DEVICE_ID_MSB 0x9
#define NOA1305_DEVICE_ID 0x0519
#define NOA1305_DRIVER_NAME "noa1305"
struct noa1305_priv {
struct i2c_client *client;
struct regmap *regmap;
struct regulator *vin_reg;
};
static int noa1305_measure(struct noa1305_priv *priv)
{
__le16 data;
int ret;
ret = regmap_bulk_read(priv->regmap, NOA1305_REG_ALS_DATA_LSB, &data,
2);
if (ret < 0)
return ret;
return le16_to_cpu(data);
}
static int noa1305_scale(struct noa1305_priv *priv, int *val, int *val2)
{
int data;
int ret;
ret = regmap_read(priv->regmap, NOA1305_REG_INTEGRATION_TIME, &data);
if (ret < 0)
return ret;
/*
* Lux = count / (<Integration Constant> * <Integration Time>)
*
* Integration Constant = 7.7
* Integration Time in Seconds
*/
switch (data) {
case NOA1305_INTEGR_TIME_800MS:
*val = 100;
*val2 = 77 * 8;
break;
case NOA1305_INTEGR_TIME_400MS:
*val = 100;
*val2 = 77 * 4;
break;
case NOA1305_INTEGR_TIME_200MS:
*val = 100;
*val2 = 77 * 2;
break;
case NOA1305_INTEGR_TIME_100MS:
*val = 100;
*val2 = 77;
break;
case NOA1305_INTEGR_TIME_50MS:
*val = 1000;
*val2 = 77 * 5;
break;
case NOA1305_INTEGR_TIME_25MS:
*val = 10000;
*val2 = 77 * 25;
break;
case NOA1305_INTEGR_TIME_12_5MS:
*val = 100000;
*val2 = 77 * 125;
break;
case NOA1305_INTEGR_TIME_6_25MS:
*val = 1000000;
*val2 = 77 * 625;
break;
default:
return -EINVAL;
}
return IIO_VAL_FRACTIONAL;
}
static const struct iio_chan_spec noa1305_channels[] = {
{
.type = IIO_LIGHT,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
}
};
static int noa1305_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
{
int ret = -EINVAL;
struct noa1305_priv *priv = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_RAW:
switch (chan->type) {
case IIO_LIGHT:
ret = noa1305_measure(priv);
if (ret < 0)
return ret;
*val = ret;
return IIO_VAL_INT;
default:
break;
}
break;
case IIO_CHAN_INFO_SCALE:
switch (chan->type) {
case IIO_LIGHT:
return noa1305_scale(priv, val, val2);
default:
break;
}
break;
default:
break;
}
return ret;
}
static const struct iio_info noa1305_info = {
.read_raw = noa1305_read_raw,
};
static bool noa1305_writable_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
case NOA1305_REG_POWER_CONTROL:
case NOA1305_REG_RESET:
case NOA1305_REG_INTEGRATION_TIME:
case NOA1305_REG_INT_SELECT:
case NOA1305_REG_INT_THRESH_LSB:
case NOA1305_REG_INT_THRESH_MSB:
return true;
default:
return false;
}
}
static const struct regmap_config noa1305_regmap_config = {
.name = NOA1305_DRIVER_NAME,
.reg_bits = 8,
.val_bits = 8,
.max_register = NOA1305_REG_DEVICE_ID_MSB,
.writeable_reg = noa1305_writable_reg,
};
static void noa1305_reg_remove(void *data)
{
struct noa1305_priv *priv = data;
regulator_disable(priv->vin_reg);
}
static int noa1305_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct noa1305_priv *priv;
struct iio_dev *indio_dev;
struct regmap *regmap;
__le16 data;
unsigned int dev_id;
int ret;
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*priv));
if (!indio_dev)
return -ENOMEM;
regmap = devm_regmap_init_i2c(client, &noa1305_regmap_config);
if (IS_ERR(regmap)) {
dev_err(&client->dev, "Regmap initialization failed.\n");
return PTR_ERR(regmap);
}
priv = iio_priv(indio_dev);
priv->vin_reg = devm_regulator_get(&client->dev, "vin");
if (IS_ERR(priv->vin_reg))
return dev_err_probe(&client->dev, PTR_ERR(priv->vin_reg),
"get regulator vin failed\n");
ret = regulator_enable(priv->vin_reg);
if (ret) {
dev_err(&client->dev, "enable regulator vin failed\n");
return ret;
}
ret = devm_add_action_or_reset(&client->dev, noa1305_reg_remove, priv);
if (ret) {
dev_err(&client->dev, "addition of devm action failed\n");
return ret;
}
i2c_set_clientdata(client, indio_dev);
priv->client = client;
priv->regmap = regmap;
ret = regmap_bulk_read(regmap, NOA1305_REG_DEVICE_ID_LSB, &data, 2);
if (ret < 0) {
dev_err(&client->dev, "ID reading failed: %d\n", ret);
return ret;
}
dev_id = le16_to_cpu(data);
if (dev_id != NOA1305_DEVICE_ID) {
dev_err(&client->dev, "Unknown device ID: 0x%x\n", dev_id);
return -ENODEV;
}
ret = regmap_write(regmap, NOA1305_REG_POWER_CONTROL,
NOA1305_POWER_CONTROL_ON);
if (ret < 0) {
dev_err(&client->dev, "Enabling power control failed\n");
return ret;
}
ret = regmap_write(regmap, NOA1305_REG_RESET, NOA1305_RESET_RESET);
if (ret < 0) {
dev_err(&client->dev, "Device reset failed\n");
return ret;
}
ret = regmap_write(regmap, NOA1305_REG_INTEGRATION_TIME,
NOA1305_INTEGR_TIME_800MS);
if (ret < 0) {
dev_err(&client->dev, "Setting integration time failed\n");
return ret;
}
indio_dev->info = &noa1305_info;
indio_dev->channels = noa1305_channels;
indio_dev->num_channels = ARRAY_SIZE(noa1305_channels);
indio_dev->name = NOA1305_DRIVER_NAME;
indio_dev->modes = INDIO_DIRECT_MODE;
ret = devm_iio_device_register(&client->dev, indio_dev);
if (ret)
dev_err(&client->dev, "registering device failed\n");
return ret;
}
static const struct of_device_id noa1305_of_match[] = {
{ .compatible = "onnn,noa1305" },
{ }
};
MODULE_DEVICE_TABLE(of, noa1305_of_match);
static const struct i2c_device_id noa1305_ids[] = {
{ "noa1305", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, noa1305_ids);
static struct i2c_driver noa1305_driver = {
.driver = {
.name = NOA1305_DRIVER_NAME,
.of_match_table = noa1305_of_match,
},
.probe = noa1305_probe,
.id_table = noa1305_ids,
};
module_i2c_driver(noa1305_driver);
MODULE_AUTHOR("Sergei Miroshnichenko <sergeimir@emcraft.com>");
MODULE_AUTHOR("Martyn Welch <martyn.welch@collabora.com");
MODULE_DESCRIPTION("ON Semiconductor NOA1305 ambient light sensor");
MODULE_LICENSE("GPL");
|