1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
|
// SPDX-License-Identifier: GPL-2.0
/*
* LinkStation power off restart driver
* Copyright (C) 2020 Daniel González Cabanelas <dgcbueu@gmail.com>
*/
#include <linux/module.h>
#include <linux/notifier.h>
#include <linux/of.h>
#include <linux/of_mdio.h>
#include <linux/of_platform.h>
#include <linux/reboot.h>
#include <linux/phy.h>
/* Defines from the eth phy Marvell driver */
#define MII_MARVELL_COPPER_PAGE 0
#define MII_MARVELL_LED_PAGE 3
#define MII_MARVELL_WOL_PAGE 17
#define MII_MARVELL_PHY_PAGE 22
#define MII_PHY_LED_CTRL 16
#define MII_PHY_LED_POL_CTRL 17
#define MII_88E1318S_PHY_LED_TCR 18
#define MII_88E1318S_PHY_WOL_CTRL 16
#define MII_M1011_IEVENT 19
#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE BIT(7)
#define MII_88E1318S_PHY_LED_TCR_FORCE_INT BIT(15)
#define MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS BIT(12)
#define LED2_FORCE_ON (0x8 << 8)
#define LEDMASK GENMASK(11,8)
#define MII_88E1318S_PHY_LED_POL_LED2 BIT(4)
struct power_off_cfg {
char *mdio_node_name;
void (*phy_set_reg)(bool restart);
};
static struct phy_device *phydev;
static const struct power_off_cfg *cfg;
static void linkstation_mvphy_reg_intn(bool restart)
{
int rc = 0, saved_page;
u16 data = 0;
if (restart)
data = MII_88E1318S_PHY_LED_TCR_FORCE_INT;
saved_page = phy_select_page(phydev, MII_MARVELL_LED_PAGE);
if (saved_page < 0)
goto err;
/* Force manual LED2 control to let INTn work */
__phy_modify(phydev, MII_PHY_LED_CTRL, LEDMASK, LED2_FORCE_ON);
/* Set the LED[2]/INTn pin to the required state */
__phy_modify(phydev, MII_88E1318S_PHY_LED_TCR,
MII_88E1318S_PHY_LED_TCR_FORCE_INT,
MII_88E1318S_PHY_LED_TCR_INTn_ENABLE | data);
if (!data) {
/* Clear interrupts to ensure INTn won't be holded in high state */
__phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_MARVELL_COPPER_PAGE);
__phy_read(phydev, MII_M1011_IEVENT);
/* If WOL was enabled and a magic packet was received before powering
* off, we won't be able to wake up by sending another magic packet.
* Clear WOL status.
*/
__phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_MARVELL_WOL_PAGE);
__phy_set_bits(phydev, MII_88E1318S_PHY_WOL_CTRL,
MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS);
}
err:
rc = phy_restore_page(phydev, saved_page, rc);
if (rc < 0)
dev_err(&phydev->mdio.dev, "Write register failed, %d\n", rc);
}
static void readynas_mvphy_set_reg(bool restart)
{
int rc = 0, saved_page;
u16 data = 0;
if (restart)
data = MII_88E1318S_PHY_LED_POL_LED2;
saved_page = phy_select_page(phydev, MII_MARVELL_LED_PAGE);
if (saved_page < 0)
goto err;
/* Set the LED[2].0 Polarity bit to the required state */
__phy_modify(phydev, MII_PHY_LED_POL_CTRL,
MII_88E1318S_PHY_LED_POL_LED2, data);
if (!data) {
/* If WOL was enabled and a magic packet was received before powering
* off, we won't be able to wake up by sending another magic packet.
* Clear WOL status.
*/
__phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_MARVELL_WOL_PAGE);
__phy_set_bits(phydev, MII_88E1318S_PHY_WOL_CTRL,
MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS);
}
err:
rc = phy_restore_page(phydev, saved_page, rc);
if (rc < 0)
dev_err(&phydev->mdio.dev, "Write register failed, %d\n", rc);
}
static const struct power_off_cfg linkstation_power_off_cfg = {
.mdio_node_name = "mdio",
.phy_set_reg = linkstation_mvphy_reg_intn,
};
static const struct power_off_cfg readynas_power_off_cfg = {
.mdio_node_name = "mdio-bus",
.phy_set_reg = readynas_mvphy_set_reg,
};
static int linkstation_reboot_notifier(struct notifier_block *nb,
unsigned long action, void *unused)
{
if (action == SYS_RESTART)
cfg->phy_set_reg(true);
return NOTIFY_DONE;
}
static struct notifier_block linkstation_reboot_nb = {
.notifier_call = linkstation_reboot_notifier,
};
static void linkstation_poweroff(void)
{
unregister_reboot_notifier(&linkstation_reboot_nb);
cfg->phy_set_reg(false);
kernel_restart("Power off");
}
static const struct of_device_id ls_poweroff_of_match[] = {
{ .compatible = "buffalo,ls421d",
.data = &linkstation_power_off_cfg,
},
{ .compatible = "buffalo,ls421de",
.data = &linkstation_power_off_cfg,
},
{ .compatible = "netgear,readynas-duo-v2",
.data = &readynas_power_off_cfg,
},
{ },
};
static int __init linkstation_poweroff_init(void)
{
struct mii_bus *bus;
struct device_node *dn;
const struct of_device_id *match;
dn = of_find_matching_node(NULL, ls_poweroff_of_match);
if (!dn)
return -ENODEV;
of_node_put(dn);
match = of_match_node(ls_poweroff_of_match, dn);
cfg = match->data;
dn = of_find_node_by_name(NULL, cfg->mdio_node_name);
if (!dn)
return -ENODEV;
bus = of_mdio_find_bus(dn);
of_node_put(dn);
if (!bus)
return -EPROBE_DEFER;
phydev = phy_find_first(bus);
put_device(&bus->dev);
if (!phydev)
return -EPROBE_DEFER;
register_reboot_notifier(&linkstation_reboot_nb);
pm_power_off = linkstation_poweroff;
return 0;
}
static void __exit linkstation_poweroff_exit(void)
{
pm_power_off = NULL;
unregister_reboot_notifier(&linkstation_reboot_nb);
}
module_init(linkstation_poweroff_init);
module_exit(linkstation_poweroff_exit);
MODULE_AUTHOR("Daniel González Cabanelas <dgcbueu@gmail.com>");
MODULE_DESCRIPTION("LinkStation power off driver");
MODULE_LICENSE("GPL v2");
|
