1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462
|
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
# Please run as root
# Kselftest framework requirement - SKIP code is 4.
ksft_skip=4
count_total=0
count_pass=0
count_fail=0
count_skip=0
exitcode=0
usage() {
cat <<EOF
usage: ${BASH_SOURCE[0]:-$0} [ options ]
-a: run all tests, including extra ones (other than destructive ones)
-t: specify specific categories to tests to run
-h: display this message
-n: disable TAP output
-d: run destructive tests
The default behavior is to run required tests only. If -a is specified,
will run all tests.
Alternatively, specific groups tests can be run by passing a string
to the -t argument containing one or more of the following categories
separated by spaces:
- mmap
tests for mmap(2)
- gup_test
tests for gup
- userfaultfd
tests for userfaultfd(2)
- compaction
a test for the patch "Allow compaction of unevictable pages"
- mlock
tests for mlock(2)
- mremap
tests for mremap(2)
- hugevm
tests for very large virtual address space
- vmalloc
vmalloc smoke tests
- hmm
hmm smoke tests
- madv_populate
test memadvise(2) MADV_POPULATE_{READ,WRITE} options
- memfd_secret
test memfd_secret(2)
- process_mrelease
test process_mrelease(2)
- ksm
ksm tests that do not require >=2 NUMA nodes
- ksm_numa
ksm tests that require >=2 NUMA nodes
- pkey
memory protection key tests
- soft_dirty
test soft dirty page bit semantics
- pagemap
test pagemap_scan IOCTL
- cow
test copy-on-write semantics
- thp
test transparent huge pages
- hugetlb
test hugetlbfs huge pages
- migration
invoke move_pages(2) to exercise the migration entry code
paths in the kernel
- mkdirty
test handling of code that might set PTE/PMD dirty in
read-only VMAs
- mdwe
test prctl(PR_SET_MDWE, ...)
example: ./run_vmtests.sh -t "hmm mmap ksm"
EOF
exit 0
}
RUN_ALL=false
RUN_DESTRUCTIVE=false
TAP_PREFIX="# "
while getopts "aht:n" OPT; do
case ${OPT} in
"a") RUN_ALL=true ;;
"h") usage ;;
"t") VM_SELFTEST_ITEMS=${OPTARG} ;;
"n") TAP_PREFIX= ;;
"d") RUN_DESTRUCTIVE=true ;;
esac
done
shift $((OPTIND -1))
# default behavior: run all tests
VM_SELFTEST_ITEMS=${VM_SELFTEST_ITEMS:-default}
test_selected() {
if [ "$VM_SELFTEST_ITEMS" == "default" ]; then
# If no VM_SELFTEST_ITEMS are specified, run all tests
return 0
fi
# If test selected argument is one of the test items
if [[ " ${VM_SELFTEST_ITEMS[*]} " =~ " ${1} " ]]; then
return 0
else
return 1
fi
}
run_gup_matrix() {
# -t: thp=on, -T: thp=off, -H: hugetlb=on
local hugetlb_mb=$(( needmem_KB / 1024 ))
for huge in -t -T "-H -m $hugetlb_mb"; do
# -u: gup-fast, -U: gup-basic, -a: pin-fast, -b: pin-basic, -L: pin-longterm
for test_cmd in -u -U -a -b -L; do
# -w: write=1, -W: write=0
for write in -w -W; do
# -S: shared
for share in -S " "; do
# -n: How many pages to fetch together? 512 is special
# because it's default thp size (or 2M on x86), 123 to
# just test partial gup when hit a huge in whatever form
for num in "-n 1" "-n 512" "-n 123"; do
CATEGORY="gup_test" run_test ./gup_test \
$huge $test_cmd $write $share $num
done
done
done
done
done
}
# get huge pagesize and freepages from /proc/meminfo
while read -r name size unit; do
if [ "$name" = "HugePages_Free:" ]; then
freepgs="$size"
fi
if [ "$name" = "Hugepagesize:" ]; then
hpgsize_KB="$size"
fi
done < /proc/meminfo
# Simple hugetlbfs tests have a hardcoded minimum requirement of
# huge pages totaling 256MB (262144KB) in size. The userfaultfd
# hugetlb test requires a minimum of 2 * nr_cpus huge pages. Take
# both of these requirements into account and attempt to increase
# number of huge pages available.
nr_cpus=$(nproc)
uffd_min_KB=$((hpgsize_KB * nr_cpus * 2))
hugetlb_min_KB=$((256 * 1024))
if [[ $uffd_min_KB -gt $hugetlb_min_KB ]]; then
needmem_KB=$uffd_min_KB
else
needmem_KB=$hugetlb_min_KB
fi
# set proper nr_hugepages
if [ -n "$freepgs" ] && [ -n "$hpgsize_KB" ]; then
nr_hugepgs=$(cat /proc/sys/vm/nr_hugepages)
needpgs=$((needmem_KB / hpgsize_KB))
tries=2
while [ "$tries" -gt 0 ] && [ "$freepgs" -lt "$needpgs" ]; do
lackpgs=$((needpgs - freepgs))
echo 3 > /proc/sys/vm/drop_caches
if ! echo $((lackpgs + nr_hugepgs)) > /proc/sys/vm/nr_hugepages; then
echo "Please run this test as root"
exit $ksft_skip
fi
while read -r name size unit; do
if [ "$name" = "HugePages_Free:" ]; then
freepgs=$size
fi
done < /proc/meminfo
tries=$((tries - 1))
done
if [ "$freepgs" -lt "$needpgs" ]; then
printf "Not enough huge pages available (%d < %d)\n" \
"$freepgs" "$needpgs"
fi
else
echo "no hugetlbfs support in kernel?"
exit 1
fi
# filter 64bit architectures
ARCH64STR="arm64 mips64 parisc64 ppc64 ppc64le riscv64 s390x sparc64 x86_64"
if [ -z "$ARCH" ]; then
ARCH=$(uname -m 2>/dev/null | sed -e 's/aarch64.*/arm64/')
fi
VADDR64=0
echo "$ARCH64STR" | grep "$ARCH" &>/dev/null && VADDR64=1
tap_prefix() {
sed -e "s/^/${TAP_PREFIX}/"
}
tap_output() {
if [[ ! -z "$TAP_PREFIX" ]]; then
read str
echo $str
fi
}
pretty_name() {
echo "$*" | sed -e 's/^\(bash \)\?\.\///'
}
# Usage: run_test [test binary] [arbitrary test arguments...]
run_test() {
if test_selected ${CATEGORY}; then
# On memory constrainted systems some tests can fail to allocate hugepages.
# perform some cleanup before the test for a higher success rate.
if [ ${CATEGORY} == "thp" ] | [ ${CATEGORY} == "hugetlb" ]; then
echo 3 > /proc/sys/vm/drop_caches
sleep 2
echo 1 > /proc/sys/vm/compact_memory
sleep 2
fi
local test=$(pretty_name "$*")
local title="running $*"
local sep=$(echo -n "$title" | tr "[:graph:][:space:]" -)
printf "%s\n%s\n%s\n" "$sep" "$title" "$sep" | tap_prefix
("$@" 2>&1) | tap_prefix
local ret=${PIPESTATUS[0]}
count_total=$(( count_total + 1 ))
if [ $ret -eq 0 ]; then
count_pass=$(( count_pass + 1 ))
echo "[PASS]" | tap_prefix
echo "ok ${count_total} ${test}" | tap_output
elif [ $ret -eq $ksft_skip ]; then
count_skip=$(( count_skip + 1 ))
echo "[SKIP]" | tap_prefix
echo "ok ${count_total} ${test} # SKIP" | tap_output
exitcode=$ksft_skip
else
count_fail=$(( count_fail + 1 ))
echo "[FAIL]" | tap_prefix
echo "not ok ${count_total} ${test} # exit=$ret" | tap_output
exitcode=1
fi
fi # test_selected
}
echo "TAP version 13" | tap_output
CATEGORY="hugetlb" run_test ./hugepage-mmap
shmmax=$(cat /proc/sys/kernel/shmmax)
shmall=$(cat /proc/sys/kernel/shmall)
echo 268435456 > /proc/sys/kernel/shmmax
echo 4194304 > /proc/sys/kernel/shmall
CATEGORY="hugetlb" run_test ./hugepage-shm
echo "$shmmax" > /proc/sys/kernel/shmmax
echo "$shmall" > /proc/sys/kernel/shmall
CATEGORY="hugetlb" run_test ./map_hugetlb
CATEGORY="hugetlb" run_test ./hugepage-mremap
CATEGORY="hugetlb" run_test ./hugepage-vmemmap
CATEGORY="hugetlb" run_test ./hugetlb-madvise
CATEGORY="hugetlb" run_test ./hugetlb_dio
nr_hugepages_tmp=$(cat /proc/sys/vm/nr_hugepages)
# For this test, we need one and just one huge page
echo 1 > /proc/sys/vm/nr_hugepages
CATEGORY="hugetlb" run_test ./hugetlb_fault_after_madv
CATEGORY="hugetlb" run_test ./hugetlb_madv_vs_map
# Restore the previous number of huge pages, since further tests rely on it
echo "$nr_hugepages_tmp" > /proc/sys/vm/nr_hugepages
if test_selected "hugetlb"; then
echo "NOTE: These hugetlb tests provide minimal coverage. Use" | tap_prefix
echo " https://github.com/libhugetlbfs/libhugetlbfs.git for" | tap_prefix
echo " hugetlb regression testing." | tap_prefix
fi
CATEGORY="mmap" run_test ./map_fixed_noreplace
if $RUN_ALL; then
run_gup_matrix
else
# get_user_pages_fast() benchmark
CATEGORY="gup_test" run_test ./gup_test -u
# pin_user_pages_fast() benchmark
CATEGORY="gup_test" run_test ./gup_test -a
fi
# Dump pages 0, 19, and 4096, using pin_user_pages:
CATEGORY="gup_test" run_test ./gup_test -ct -F 0x1 0 19 0x1000
CATEGORY="gup_test" run_test ./gup_longterm
CATEGORY="userfaultfd" run_test ./uffd-unit-tests
uffd_stress_bin=./uffd-stress
CATEGORY="userfaultfd" run_test ${uffd_stress_bin} anon 20 16
# Hugetlb tests require source and destination huge pages. Pass in half
# the size of the free pages we have, which is used for *each*.
half_ufd_size_MB=$((freepgs / 2))
CATEGORY="userfaultfd" run_test ${uffd_stress_bin} hugetlb "$half_ufd_size_MB" 32
CATEGORY="userfaultfd" run_test ${uffd_stress_bin} hugetlb-private "$half_ufd_size_MB" 32
CATEGORY="userfaultfd" run_test ${uffd_stress_bin} shmem 20 16
CATEGORY="userfaultfd" run_test ${uffd_stress_bin} shmem-private 20 16
#cleanup
echo "$nr_hugepgs" > /proc/sys/vm/nr_hugepages
CATEGORY="compaction" run_test ./compaction_test
if command -v sudo &> /dev/null;
then
CATEGORY="mlock" run_test sudo -u nobody ./on-fault-limit
else
echo "# SKIP ./on-fault-limit"
fi
CATEGORY="mmap" run_test ./map_populate
CATEGORY="mlock" run_test ./mlock-random-test
CATEGORY="mlock" run_test ./mlock2-tests
CATEGORY="process_mrelease" run_test ./mrelease_test
CATEGORY="mremap" run_test ./mremap_test
CATEGORY="hugetlb" run_test ./thuge-gen
CATEGORY="hugetlb" run_test ./charge_reserved_hugetlb.sh -cgroup-v2
CATEGORY="hugetlb" run_test ./hugetlb_reparenting_test.sh -cgroup-v2
if $RUN_DESTRUCTIVE; then
nr_hugepages_tmp=$(cat /proc/sys/vm/nr_hugepages)
enable_soft_offline=$(cat /proc/sys/vm/enable_soft_offline)
echo 8 > /proc/sys/vm/nr_hugepages
CATEGORY="hugetlb" run_test ./hugetlb-soft-offline
echo "$nr_hugepages_tmp" > /proc/sys/vm/nr_hugepages
echo "$enable_soft_offline" > /proc/sys/vm/enable_soft_offline
CATEGORY="hugetlb" run_test ./hugetlb-read-hwpoison
fi
if [ $VADDR64 -ne 0 ]; then
# set overcommit_policy as OVERCOMMIT_ALWAYS so that kernel
# allows high virtual address allocation requests independent
# of platform's physical memory.
prev_policy=$(cat /proc/sys/vm/overcommit_memory)
echo 1 > /proc/sys/vm/overcommit_memory
CATEGORY="hugevm" run_test ./virtual_address_range
echo $prev_policy > /proc/sys/vm/overcommit_memory
# va high address boundary switch test
ARCH_ARM64="arm64"
prev_nr_hugepages=$(cat /proc/sys/vm/nr_hugepages)
if [ "$ARCH" == "$ARCH_ARM64" ]; then
echo 6 > /proc/sys/vm/nr_hugepages
fi
CATEGORY="hugevm" run_test bash ./va_high_addr_switch.sh
if [ "$ARCH" == "$ARCH_ARM64" ]; then
echo $prev_nr_hugepages > /proc/sys/vm/nr_hugepages
fi
fi # VADDR64
# vmalloc stability smoke test
CATEGORY="vmalloc" run_test bash ./test_vmalloc.sh smoke
CATEGORY="mremap" run_test ./mremap_dontunmap
CATEGORY="hmm" run_test bash ./test_hmm.sh smoke
# MADV_POPULATE_READ and MADV_POPULATE_WRITE tests
CATEGORY="madv_populate" run_test ./madv_populate
if [ -x ./memfd_secret ]
then
(echo 0 | sudo tee /proc/sys/kernel/yama/ptrace_scope 2>&1) | tap_prefix
CATEGORY="memfd_secret" run_test ./memfd_secret
fi
# KSM KSM_MERGE_TIME_HUGE_PAGES test with size of 100
CATEGORY="ksm" run_test ./ksm_tests -H -s 100
# KSM KSM_MERGE_TIME test with size of 100
CATEGORY="ksm" run_test ./ksm_tests -P -s 100
# KSM MADV_MERGEABLE test with 10 identical pages
CATEGORY="ksm" run_test ./ksm_tests -M -p 10
# KSM unmerge test
CATEGORY="ksm" run_test ./ksm_tests -U
# KSM test with 10 zero pages and use_zero_pages = 0
CATEGORY="ksm" run_test ./ksm_tests -Z -p 10 -z 0
# KSM test with 10 zero pages and use_zero_pages = 1
CATEGORY="ksm" run_test ./ksm_tests -Z -p 10 -z 1
# KSM test with 2 NUMA nodes and merge_across_nodes = 1
CATEGORY="ksm_numa" run_test ./ksm_tests -N -m 1
# KSM test with 2 NUMA nodes and merge_across_nodes = 0
CATEGORY="ksm_numa" run_test ./ksm_tests -N -m 0
CATEGORY="ksm" run_test ./ksm_functional_tests
# protection_keys tests
nr_hugepgs=$(cat /proc/sys/vm/nr_hugepages)
if [ -x ./protection_keys_32 ]
then
CATEGORY="pkey" run_test ./protection_keys_32
fi
if [ -x ./protection_keys_64 ]
then
CATEGORY="pkey" run_test ./protection_keys_64
fi
echo "$nr_hugepgs" > /proc/sys/vm/nr_hugepages
if [ -x ./soft-dirty ]
then
CATEGORY="soft_dirty" run_test ./soft-dirty
fi
CATEGORY="pagemap" run_test ./pagemap_ioctl
# COW tests
CATEGORY="cow" run_test ./cow
CATEGORY="thp" run_test ./khugepaged
CATEGORY="thp" run_test ./khugepaged -s 2
CATEGORY="thp" run_test ./transhuge-stress -d 20
# Try to create XFS if not provided
if [ -z "${SPLIT_HUGE_PAGE_TEST_XFS_PATH}" ]; then
if test_selected "thp"; then
if grep xfs /proc/filesystems &>/dev/null; then
XFS_IMG=$(mktemp /tmp/xfs_img_XXXXXX)
SPLIT_HUGE_PAGE_TEST_XFS_PATH=$(mktemp -d /tmp/xfs_dir_XXXXXX)
truncate -s 314572800 ${XFS_IMG}
mkfs.xfs -q ${XFS_IMG}
mount -o loop ${XFS_IMG} ${SPLIT_HUGE_PAGE_TEST_XFS_PATH}
MOUNTED_XFS=1
fi
fi
fi
CATEGORY="thp" run_test ./split_huge_page_test ${SPLIT_HUGE_PAGE_TEST_XFS_PATH}
if [ -n "${MOUNTED_XFS}" ]; then
umount ${SPLIT_HUGE_PAGE_TEST_XFS_PATH}
rmdir ${SPLIT_HUGE_PAGE_TEST_XFS_PATH}
rm -f ${XFS_IMG}
fi
CATEGORY="migration" run_test ./migration
CATEGORY="mkdirty" run_test ./mkdirty
CATEGORY="mdwe" run_test ./mdwe_test
echo "SUMMARY: PASS=${count_pass} SKIP=${count_skip} FAIL=${count_fail}" | tap_prefix
echo "1..${count_total}" | tap_output
exit $exitcode
|