1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
|
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2023 SberDevices
* Author: Dmitry Rokosov <ddrokosov@sberdevices.ru>
*/
/dts-v1/;
#include "meson-a1.dtsi"
#include <dt-bindings/thermal/thermal.h>
/ {
compatible = "amlogic,ad402", "amlogic,a1";
model = "Amlogic Meson A1 AD402 Development Board";
aliases {
serial0 = &uart_AO_B;
};
chosen {
stdout-path = "serial0:115200n8";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x8000000>;
};
reserved-memory {
/* 3 MiB reserved for Amlogic Trust OS (BL32) */
secos_reserved: secos@3d00000 {
reg = <0x0 0x03d00000 0x0 0x300000>;
no-map;
};
};
firmware {
optee {
compatible = "linaro,optee-tz";
method = "smc";
};
};
battery_4v2: regulator-battery-4v2 {
compatible = "regulator-fixed";
regulator-name = "4V2";
regulator-min-microvolt = <4200000>;
regulator-max-microvolt = <4200000>;
regulator-always-on;
};
vddq_1v35: regulator-vddq-1v35 {
compatible = "regulator-fixed";
regulator-name = "VDDQ_1V35";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
vin-supply = <&battery_4v2>;
regulator-always-on;
};
vddao_3v3: regulator-vddao-3v3 {
compatible = "regulator-fixed";
regulator-name = "VDDAO_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&battery_4v2>;
regulator-always-on;
};
vcc_3v3: regulator-vcc-3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vddao_3v3>;
regulator-always-on;
};
vddio_1v8: regulator-vddio-1v8 {
compatible = "regulator-fixed";
regulator-name = "VDDIO_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vddao_3v3>;
regulator-always-on;
};
thermal-zones {
soc_thermal: soc-thermal {
polling-delay = <1000>;
polling-delay-passive = <100>;
sustainable-power = <130>;
thermal-sensors = <&cpu_temp>;
trips {
soc_passive: soc-passive {
temperature = <70000>;
hysteresis = <2000>;
type = "passive";
};
soc_hot: soc-hot {
temperature = <85000>;
hysteresis = <5000>;
type = "hot";
};
soc_critical: soc-critical {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
soc_cooling_maps: cooling-maps {
map0 {
trip = <&soc_passive>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&soc_hot>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
};
};
/* Bluetooth HCI H4 */
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
pinctrl-names = "default";
};
&uart_AO_B {
status = "okay";
};
&saradc {
status = "okay";
vref-supply = <&vddio_1v8>;
};
&spifc {
status = "okay";
pinctrl-0 = <&spifc_pins>;
pinctrl-names = "default";
flash@0 {
compatible = "spi-nand";
status = "okay";
reg = <0>;
spi-max-frequency = <96000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
};
};
&usb2_phy1 {
phy-supply = <&vcc_3v3>;
};
&usb {
status = "okay";
dr_mode = "peripheral";
};
&sd_emmc {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&sdio_pins>;
pinctrl-1 = <&sdio_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
sd-uhs-sdr104;
max-frequency = <200000000>;
non-removable;
disable-wp;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_1v8>;
};
|
