1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300
|
// SPDX-License-Identifier: GPL-2.0
/*
* Elida kd35t133 3.5" MIPI-DSI panel driver
* Copyright (C) 2020 Theobroma Systems Design und Consulting GmbH
*
* based on
*
* Rockteck jh057n00900 5.5" MIPI-DSI panel driver
* Copyright (C) Purism SPC 2019
*/
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/media-bus-format.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/regulator/consumer.h>
#include <video/display_timing.h>
#include <video/mipi_display.h>
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
/* Manufacturer specific Commands send via DSI */
#define KD35T133_CMD_INTERFACEMODECTRL 0xb0
#define KD35T133_CMD_FRAMERATECTRL 0xb1
#define KD35T133_CMD_DISPLAYINVERSIONCTRL 0xb4
#define KD35T133_CMD_DISPLAYFUNCTIONCTRL 0xb6
#define KD35T133_CMD_POWERCONTROL1 0xc0
#define KD35T133_CMD_POWERCONTROL2 0xc1
#define KD35T133_CMD_VCOMCONTROL 0xc5
#define KD35T133_CMD_POSITIVEGAMMA 0xe0
#define KD35T133_CMD_NEGATIVEGAMMA 0xe1
#define KD35T133_CMD_SETIMAGEFUNCTION 0xe9
#define KD35T133_CMD_ADJUSTCONTROL3 0xf7
struct kd35t133 {
struct device *dev;
struct drm_panel panel;
struct gpio_desc *reset_gpio;
struct regulator *vdd;
struct regulator *iovcc;
enum drm_panel_orientation orientation;
};
static inline struct kd35t133 *panel_to_kd35t133(struct drm_panel *panel)
{
return container_of(panel, struct kd35t133, panel);
}
static void kd35t133_init_sequence(struct mipi_dsi_multi_context *dsi_ctx)
{
/*
* Init sequence was supplied by the panel vendor with minimal
* documentation.
*/
mipi_dsi_dcs_write_seq_multi(dsi_ctx, KD35T133_CMD_POSITIVEGAMMA,
0x00, 0x13, 0x18, 0x04, 0x0f, 0x06, 0x3a, 0x56,
0x4d, 0x03, 0x0a, 0x06, 0x30, 0x3e, 0x0f);
mipi_dsi_dcs_write_seq_multi(dsi_ctx, KD35T133_CMD_NEGATIVEGAMMA,
0x00, 0x13, 0x18, 0x01, 0x11, 0x06, 0x38, 0x34,
0x4d, 0x06, 0x0d, 0x0b, 0x31, 0x37, 0x0f);
mipi_dsi_dcs_write_seq_multi(dsi_ctx, KD35T133_CMD_POWERCONTROL1, 0x18, 0x17);
mipi_dsi_dcs_write_seq_multi(dsi_ctx, KD35T133_CMD_POWERCONTROL2, 0x41);
mipi_dsi_dcs_write_seq_multi(dsi_ctx, KD35T133_CMD_VCOMCONTROL, 0x00, 0x1a, 0x80);
mipi_dsi_dcs_write_seq_multi(dsi_ctx, MIPI_DCS_SET_ADDRESS_MODE, 0x48);
mipi_dsi_dcs_write_seq_multi(dsi_ctx, MIPI_DCS_SET_PIXEL_FORMAT, 0x55);
mipi_dsi_dcs_write_seq_multi(dsi_ctx, KD35T133_CMD_INTERFACEMODECTRL, 0x00);
mipi_dsi_dcs_write_seq_multi(dsi_ctx, KD35T133_CMD_FRAMERATECTRL, 0xa0);
mipi_dsi_dcs_write_seq_multi(dsi_ctx, KD35T133_CMD_DISPLAYINVERSIONCTRL, 0x02);
mipi_dsi_dcs_write_seq_multi(dsi_ctx, KD35T133_CMD_DISPLAYFUNCTIONCTRL,
0x20, 0x02);
mipi_dsi_dcs_write_seq_multi(dsi_ctx, KD35T133_CMD_SETIMAGEFUNCTION, 0x00);
mipi_dsi_dcs_write_seq_multi(dsi_ctx, KD35T133_CMD_ADJUSTCONTROL3,
0xa9, 0x51, 0x2c, 0x82);
mipi_dsi_dcs_write_seq_multi(dsi_ctx, MIPI_DCS_ENTER_INVERT_MODE);
}
static int kd35t133_unprepare(struct drm_panel *panel)
{
struct kd35t133 *ctx = panel_to_kd35t133(panel);
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
mipi_dsi_dcs_set_display_off_multi(&dsi_ctx);
mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx);
if (dsi_ctx.accum_err)
return dsi_ctx.accum_err;
gpiod_set_value_cansleep(ctx->reset_gpio, 1);
regulator_disable(ctx->iovcc);
regulator_disable(ctx->vdd);
return 0;
}
static int kd35t133_prepare(struct drm_panel *panel)
{
struct kd35t133 *ctx = panel_to_kd35t133(panel);
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
dev_dbg(ctx->dev, "Resetting the panel\n");
dsi_ctx.accum_err = regulator_enable(ctx->vdd);
if (dsi_ctx.accum_err) {
dev_err(ctx->dev, "Failed to enable vdd supply: %d\n",
dsi_ctx.accum_err);
return dsi_ctx.accum_err;
}
dsi_ctx.accum_err = regulator_enable(ctx->iovcc);
if (dsi_ctx.accum_err) {
dev_err(ctx->dev, "Failed to enable iovcc supply: %d\n",
dsi_ctx.accum_err);
goto disable_vdd;
}
msleep(20);
gpiod_set_value_cansleep(ctx->reset_gpio, 1);
usleep_range(10, 20);
gpiod_set_value_cansleep(ctx->reset_gpio, 0);
msleep(20);
mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx);
mipi_dsi_msleep(&dsi_ctx, 250);
kd35t133_init_sequence(&dsi_ctx);
if (!dsi_ctx.accum_err)
dev_dbg(ctx->dev, "Panel init sequence done\n");
mipi_dsi_dcs_set_display_on_multi(&dsi_ctx);
mipi_dsi_msleep(&dsi_ctx, 50);
if (dsi_ctx.accum_err)
goto disable_iovcc;
return 0;
disable_iovcc:
regulator_disable(ctx->iovcc);
disable_vdd:
regulator_disable(ctx->vdd);
return dsi_ctx.accum_err;
}
static const struct drm_display_mode default_mode = {
.hdisplay = 320,
.hsync_start = 320 + 130,
.hsync_end = 320 + 130 + 4,
.htotal = 320 + 130 + 4 + 130,
.vdisplay = 480,
.vsync_start = 480 + 2,
.vsync_end = 480 + 2 + 1,
.vtotal = 480 + 2 + 1 + 2,
.clock = 17000,
.width_mm = 42,
.height_mm = 82,
};
static int kd35t133_get_modes(struct drm_panel *panel,
struct drm_connector *connector)
{
struct kd35t133 *ctx = panel_to_kd35t133(panel);
struct drm_display_mode *mode;
mode = drm_mode_duplicate(connector->dev, &default_mode);
if (!mode) {
dev_err(ctx->dev, "Failed to add mode %ux%u@%u\n",
default_mode.hdisplay, default_mode.vdisplay,
drm_mode_vrefresh(&default_mode));
return -ENOMEM;
}
drm_mode_set_name(mode);
mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
connector->display_info.width_mm = mode->width_mm;
connector->display_info.height_mm = mode->height_mm;
drm_mode_probed_add(connector, mode);
return 1;
}
static enum drm_panel_orientation kd35t133_get_orientation(struct drm_panel *panel)
{
struct kd35t133 *ctx = panel_to_kd35t133(panel);
return ctx->orientation;
}
static const struct drm_panel_funcs kd35t133_funcs = {
.unprepare = kd35t133_unprepare,
.prepare = kd35t133_prepare,
.get_modes = kd35t133_get_modes,
.get_orientation = kd35t133_get_orientation,
};
static int kd35t133_probe(struct mipi_dsi_device *dsi)
{
struct device *dev = &dsi->dev;
struct kd35t133 *ctx;
int ret;
ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(ctx->reset_gpio)) {
dev_err(dev, "cannot get reset gpio\n");
return PTR_ERR(ctx->reset_gpio);
}
ctx->vdd = devm_regulator_get(dev, "vdd");
if (IS_ERR(ctx->vdd)) {
ret = PTR_ERR(ctx->vdd);
if (ret != -EPROBE_DEFER)
dev_err(dev, "Failed to request vdd regulator: %d\n", ret);
return ret;
}
ctx->iovcc = devm_regulator_get(dev, "iovcc");
if (IS_ERR(ctx->iovcc)) {
ret = PTR_ERR(ctx->iovcc);
if (ret != -EPROBE_DEFER)
dev_err(dev, "Failed to request iovcc regulator: %d\n", ret);
return ret;
}
ret = of_drm_get_panel_orientation(dev->of_node, &ctx->orientation);
if (ret < 0) {
dev_err(dev, "%pOF: failed to get orientation %d\n", dev->of_node, ret);
return ret;
}
mipi_dsi_set_drvdata(dsi, ctx);
ctx->dev = dev;
dsi->lanes = 1;
dsi->format = MIPI_DSI_FMT_RGB888;
dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET |
MIPI_DSI_CLOCK_NON_CONTINUOUS;
drm_panel_init(&ctx->panel, &dsi->dev, &kd35t133_funcs,
DRM_MODE_CONNECTOR_DSI);
ret = drm_panel_of_backlight(&ctx->panel);
if (ret)
return ret;
drm_panel_add(&ctx->panel);
ret = mipi_dsi_attach(dsi);
if (ret < 0) {
dev_err(dev, "mipi_dsi_attach failed: %d\n", ret);
drm_panel_remove(&ctx->panel);
return ret;
}
return 0;
}
static void kd35t133_remove(struct mipi_dsi_device *dsi)
{
struct kd35t133 *ctx = mipi_dsi_get_drvdata(dsi);
int ret;
ret = mipi_dsi_detach(dsi);
if (ret < 0)
dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
drm_panel_remove(&ctx->panel);
}
static const struct of_device_id kd35t133_of_match[] = {
{ .compatible = "elida,kd35t133" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, kd35t133_of_match);
static struct mipi_dsi_driver kd35t133_driver = {
.driver = {
.name = "panel-elida-kd35t133",
.of_match_table = kd35t133_of_match,
},
.probe = kd35t133_probe,
.remove = kd35t133_remove,
};
module_mipi_dsi_driver(kd35t133_driver);
MODULE_AUTHOR("Heiko Stuebner <heiko.stuebner@theobroma-systems.com>");
MODULE_DESCRIPTION("DRM driver for Elida kd35t133 MIPI DSI panel");
MODULE_LICENSE("GPL v2");
|