1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
|
What: /sys/bus/iio/devices/iio:deviceX/out_currentY_toggle_en
KernelVersion: 5.18
Contact: linux-iio@vger.kernel.org
Description:
Toggle enable. Write 1 to enable toggle or 0 to disable it. This
is useful when one wants to change the DAC output codes. For
autonomous toggling, the way it should be done is:
- disable toggle operation;
- change out_currentY_rawN, where N is the integer value of the symbol;
- enable toggle operation.
What: /sys/bus/iio/devices/iio:deviceX/out_currentY_rawN
KernelVersion: 5.18
Contact: linux-iio@vger.kernel.org
Description:
This attribute has the same meaning as out_currentY_raw. It is
specific to toggle enabled channels and refers to the DAC output
code in INPUT_N (_rawN), where N is the integer value of the symbol.
The same scale and offset as in out_currentY_raw applies.
What: /sys/bus/iio/devices/iio:deviceX/out_currentY_symbol
KernelVersion: 5.18
Contact: linux-iio@vger.kernel.org
Description:
Performs a SW switch to a predefined output symbol. This attribute
is specific to toggle enabled channels and allows switching between
multiple predefined symbols. Each symbol corresponds to a different
output, denoted as out_currentY_rawN, where N is the integer value
of the symbol. Writing an integer value N will select out_currentY_rawN.
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_toggle_en
KernelVersion: 5.18
Contact: linux-iio@vger.kernel.org
Description:
Toggle enable. Write 1 to enable toggle or 0 to disable it. This
is useful when one wants to change the DAC output codes. For
autonomous toggling, the way it should be done is:
- disable toggle operation;
- change out_voltageY_rawN, where N is the integer value of the symbol;
- enable toggle operation.
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_rawN
KernelVersion: 5.18
Contact: linux-iio@vger.kernel.org
Description:
This attribute has the same meaning as out_currentY_raw. It is
specific to toggle enabled channels and refers to the DAC output
code in INPUT_N (_rawN), where N is the integer value of the symbol.
The same scale and offset as in out_currentY_raw applies.
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_symbol
KernelVersion: 5.18
Contact: linux-iio@vger.kernel.org
Description:
Performs a SW switch to a predefined output symbol. This attribute
is specific to toggle enabled channels and allows switching between
multiple predefined symbols. Each symbol corresponds to a different
output, denoted as out_voltageY_rawN, where N is the integer value
of the symbol. Writing an integer value N will select out_voltageY_rawN.
|
