1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
|
// SPDX-License-Identifier: GPL-2.0-only
/*
* TI LP8501 9 channel LED Driver
*
* Copyright (C) 2013 Texas Instruments
*
* Author: Milo(Woogyom) Kim <milo.kim@ti.com>
*/
#include <linux/delay.h>
#include <linux/firmware.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/leds.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/platform_data/leds-lp55xx.h>
#include <linux/slab.h>
#include "leds-lp55xx-common.h"
#define LP8501_PAGES_PER_ENGINE 1
#define LP8501_MAX_LEDS 9
/* Registers */
#define LP8501_REG_ENABLE 0x00
#define LP8501_ENABLE BIT(6)
#define LP8501_REG_OP_MODE 0x01
#define LP8501_REG_PWR_CONFIG 0x05
#define LP8501_PWR_CONFIG_M 0x03
#define LP8501_REG_LED_PWM_BASE 0x16
#define LP8501_REG_LED_CURRENT_BASE 0x26
#define LP8501_REG_CONFIG 0x36
#define LP8501_PWM_PSAVE BIT(7)
#define LP8501_AUTO_INC BIT(6)
#define LP8501_PWR_SAVE BIT(5)
#define LP8501_CP_MODE_MASK 0x18
#define LP8501_CP_MODE_SHIFT 3
#define LP8501_INT_CLK BIT(0)
#define LP8501_DEFAULT_CFG (LP8501_PWM_PSAVE | LP8501_AUTO_INC | LP8501_PWR_SAVE)
#define LP8501_REG_STATUS 0x3A
#define LP8501_ENGINE_BUSY BIT(4)
#define LP8501_REG_RESET 0x3D
#define LP8501_RESET 0xFF
#define LP8501_REG_PROG_MEM 0x50
static int lp8501_post_init_device(struct lp55xx_chip *chip)
{
int ret;
u8 val = LP8501_DEFAULT_CFG;
ret = lp55xx_write(chip, LP8501_REG_ENABLE, LP8501_ENABLE);
if (ret)
return ret;
/* Chip startup time is 500 us, 1 - 2 ms gives some margin */
usleep_range(1000, 2000);
if (chip->pdata->clock_mode != LP55XX_CLOCK_EXT)
val |= LP8501_INT_CLK;
val |= (chip->pdata->charge_pump_mode << LP8501_CP_MODE_SHIFT) & LP8501_CP_MODE_MASK;
ret = lp55xx_write(chip, LP8501_REG_CONFIG, val);
if (ret)
return ret;
/* Power selection for each output */
return lp55xx_update_bits(chip, LP8501_REG_PWR_CONFIG,
LP8501_PWR_CONFIG_M, chip->pdata->pwr_sel);
}
static void lp8501_run_engine(struct lp55xx_chip *chip, bool start)
{
/* stop engine */
if (!start) {
lp55xx_stop_all_engine(chip);
lp55xx_turn_off_channels(chip);
return;
}
lp55xx_run_engine_common(chip);
}
/* Chip specific configurations */
static struct lp55xx_device_config lp8501_cfg = {
.reg_op_mode = {
.addr = LP8501_REG_OP_MODE,
},
.reg_exec = {
.addr = LP8501_REG_ENABLE,
},
.engine_busy = {
.addr = LP8501_REG_STATUS,
.mask = LP8501_ENGINE_BUSY,
},
.reset = {
.addr = LP8501_REG_RESET,
.val = LP8501_RESET,
},
.enable = {
.addr = LP8501_REG_ENABLE,
.val = LP8501_ENABLE,
},
.prog_mem_base = {
.addr = LP8501_REG_PROG_MEM,
},
.reg_led_pwm_base = {
.addr = LP8501_REG_LED_PWM_BASE,
},
.reg_led_current_base = {
.addr = LP8501_REG_LED_CURRENT_BASE,
},
.pages_per_engine = LP8501_PAGES_PER_ENGINE,
.max_channel = LP8501_MAX_LEDS,
.post_init_device = lp8501_post_init_device,
.brightness_fn = lp55xx_led_brightness,
.set_led_current = lp55xx_set_led_current,
.firmware_cb = lp55xx_firmware_loaded_cb,
.run_engine = lp8501_run_engine,
};
static const struct i2c_device_id lp8501_id[] = {
{ "lp8501", .driver_data = (kernel_ulong_t)&lp8501_cfg, },
{ }
};
MODULE_DEVICE_TABLE(i2c, lp8501_id);
static const struct of_device_id of_lp8501_leds_match[] = {
{ .compatible = "ti,lp8501", .data = &lp8501_cfg, },
{},
};
MODULE_DEVICE_TABLE(of, of_lp8501_leds_match);
static struct i2c_driver lp8501_driver = {
.driver = {
.name = "lp8501",
.of_match_table = of_lp8501_leds_match,
},
.probe = lp55xx_probe,
.remove = lp55xx_remove,
.id_table = lp8501_id,
};
module_i2c_driver(lp8501_driver);
MODULE_DESCRIPTION("Texas Instruments LP8501 LED driver");
MODULE_AUTHOR("Milo Kim");
MODULE_LICENSE("GPL");
|
