1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
|
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2023 PHYTEC Messtechnik GmbH
* Author: Wadim Egorov <w.egorov@phytec.de>, Christoph Stoidner <c.stoidner@phytec.de>
* Copyright (C) 2024 Mathieu Othacehe <m.othacehe@gmail.com>
*
* Product homepage:
* phyBOARD-Segin carrier board is reused for the i.MX93 design.
* https://www.phytec.eu/en/produkte/single-board-computer/phyboard-segin-imx6ul/
*/
/dts-v1/;
#include "imx93-phycore-som.dtsi"
/{
model = "PHYTEC phyBOARD-Segin-i.MX93";
compatible = "phytec,imx93-phyboard-segin", "phytec,imx93-phycore-som",
"fsl,imx93";
aliases {
ethernet1 = &eqos;
rtc0 = &i2c_rtc;
rtc1 = &bbnsm_rtc;
};
chosen {
stdout-path = &lpuart1;
};
flexcan1_tc: can-phy0 {
compatible = "ti,tcan1043";
#phy-cells = <0>;
max-bitrate = <1000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1_tc>;
enable-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
};
reg_sound_1v8: regulator-sound-1v8 {
compatible = "regulator-fixed";
regulator-max-microvolt = <1800000>;
regulator-min-microvolt = <1800000>;
regulator-name = "VCC1V8_AUDIO";
};
reg_sound_3v3: regulator-sound-3v3 {
compatible = "regulator-fixed";
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
regulator-name = "VCC3V3_ANALOG";
};
reg_usdhc2_vmmc: regulator-usdhc2 {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "VCC_SD";
};
sound: sound {
compatible = "simple-audio-card";
simple-audio-card,name = "phyBOARD-Segin-TLV320AIC3007";
simple-audio-card,format = "i2s";
simple-audio-card,bitclock-master = <&dailink_master>;
simple-audio-card,frame-master = <&dailink_master>;
simple-audio-card,widgets =
"Line", "Line In",
"Line", "Line Out",
"Speaker", "Speaker";
simple-audio-card,routing =
"Line Out", "LLOUT",
"Line Out", "RLOUT",
"Speaker", "SPOP",
"Speaker", "SPOM",
"LINE1L", "Line In",
"LINE1R", "Line In";
simple-audio-card,cpu {
sound-dai = <&sai1>;
};
dailink_master: simple-audio-card,codec {
sound-dai = <&audio_codec>;
clocks = <&clk IMX93_CLK_SAI1>;
};
};
};
/* Ethernet */
&eqos {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_eqos>;
phy-mode = "rmii";
phy-handle = <ðphy2>;
assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
<&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
assigned-clock-rates = <100000000>, <50000000>;
status = "okay";
};
&mdio {
ethphy2: ethernet-phy@2 {
compatible = "ethernet-phy-id0022.1561";
reg = <2>;
clocks = <&clk IMX93_CLK_ENET_REF_PHY>;
clock-names = "rmii-ref";
micrel,led-mode = <1>;
};
};
/* CAN */
&flexcan1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1>;
phys = <&flexcan1_tc>;
status = "okay";
};
/* I2C2 */
&lpi2c2 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpi2c2>;
status = "okay";
/* Codec */
audio_codec: audio-codec@18 {
compatible = "ti,tlv320aic3007";
reg = <0x18>;
#sound-dai-cells = <0>;
AVDD-supply = <®_sound_3v3>;
IOVDD-supply = <®_sound_3v3>;
DRVDD-supply = <®_sound_3v3>;
DVDD-supply = <®_sound_1v8>;
};
/* RTC */
i2c_rtc: rtc@68 {
compatible = "microcrystal,rv4162";
reg = <0x68>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rtc>;
interrupt-parent = <&gpio4>;
interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
};
};
/* Console */
&lpuart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
/* Audio */
&sai1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai1>;
assigned-clocks = <&clk IMX93_CLK_SAI1>;
assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
assigned-clock-rates = <19200000>;
fsl,sai-mclk-direction-output;
status = "okay";
};
/* USB */
&usbotg1 {
disable-over-current;
dr_mode = "otg";
status = "okay";
};
&usbotg2 {
disable-over-current;
dr_mode = "host";
status = "okay";
};
/* SD-Card */
&usdhc2 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2_default>, <&pinctrl_usdhc2_cd>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
bus-width = <4>;
cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
disable-wp;
no-mmc;
no-sdio;
vmmc-supply = <®_usdhc2_vmmc>;
status = "okay";
};
&iomuxc {
pinctrl_eqos: eqosgrp {
fsl,pins = <
MX93_PAD_ENET1_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK 0x4000050e
MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e
MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e
MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x50e
MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x50e
MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e
MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x50e
MX93_PAD_ENET1_RXC__ENET_QOS_RX_ER 0x57e
>;
};
pinctrl_flexcan1: flexcan1grp {
fsl,pins = <
MX93_PAD_PDM_BIT_STREAM0__CAN1_RX 0x139e
MX93_PAD_PDM_CLK__CAN1_TX 0x139e
>;
};
pinctrl_flexcan1_tc: flexcan1tcgrp {
fsl,pins = <
MX93_PAD_ENET2_TD3__GPIO4_IO16 0x31e
>;
};
pinctrl_lpi2c2: lpi2c2grp {
fsl,pins = <
MX93_PAD_I2C2_SCL__LPI2C2_SCL 0x40000b9e
MX93_PAD_I2C2_SDA__LPI2C2_SDA 0x40000b9e
>;
};
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
fsl,pins = <
MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x31e
>;
};
pinctrl_rtc: rtcgrp {
fsl,pins = <
MX93_PAD_ENET2_RD2__GPIO4_IO26 0x31e
>;
};
pinctrl_sai1: sai1grp {
fsl,pins = <
MX93_PAD_UART2_RXD__SAI1_MCLK 0x1202
MX93_PAD_SAI1_TXFS__SAI1_TX_SYNC 0x1202
MX93_PAD_SAI1_TXC__SAI1_TX_BCLK 0x1202
MX93_PAD_SAI1_TXD0__SAI1_TX_DATA00 0x1402
MX93_PAD_SAI1_RXD0__SAI1_RX_DATA00 0x1402
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX93_PAD_UART1_RXD__LPUART1_RX 0x31e
MX93_PAD_UART1_TXD__LPUART1_TX 0x30e
>;
};
pinctrl_usdhc2_cd: usdhc2cdgrp {
fsl,pins = <
MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e
>;
};
/* need to config the SION for data and cmd pad, refer to ERR052021 */
pinctrl_usdhc2_default: usdhc2grp {
fsl,pins = <
MX93_PAD_SD2_CLK__USDHC2_CLK 0x159e
MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000139e
MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000138e
MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000138e
MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x4000138e
MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x4000139e
MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
>;
};
/* need to config the SION for data and cmd pad, refer to ERR052021 */
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
fsl,pins = <
MX93_PAD_SD2_CLK__USDHC2_CLK 0x159e
MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000139e
MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000138e
MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000138e
MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x4000139e
MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x4000139e
MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
>;
};
/* need to config the SION for data and cmd pad, refer to ERR052021 */
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins = <
MX93_PAD_SD2_CLK__USDHC2_CLK 0x158e
MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000139e
MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000139e
MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000139e
MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x4000139e
MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x4000139e
MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
>;
};
};
|
