1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/leds/backlight/common.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Common backlight properties
maintainers:
- Lee Jones <lee@kernel.org>
- Daniel Thompson <daniel.thompson@linaro.org>
- Jingoo Han <jingoohan1@gmail.com>
description:
Backlight devices provide backlight for different types of graphical
displays. They are typically but not necessarily implemented using a white
LED powered by a boost converter.
properties:
default-brightness:
description:
The default brightness that should be applied to the LED by the operating
system on start-up. The brightness should not exceed the brightness the
LED can provide.
$ref: /schemas/types.yaml#/definitions/uint32
max-brightness:
description:
Normally the maximum brightness is determined by the hardware and this
property is not required. This property is used to put a software limit
on the brightness apart from what the driver says, as it could happen
that a LED can be made so bright that it gets damaged or causes damage
due to restrictions in a specific system, such as mounting conditions.
$ref: /schemas/types.yaml#/definitions/uint32
brightness-levels:
description:
Array of distinct brightness levels. The levels must be in the range
accepted by the underlying LED device. Typically these are in the range
from 0 to 255, but any range starting at 0 will do, as long as they are
accepted by the LED.
The 0 value means a 0% of brightness (darkest/off), while the last value
in the array represents a full 100% brightness (brightest).
If this array is not provided, the driver default mapping is used.
$ref: /schemas/types.yaml#/definitions/uint32-array
default-brightness-level:
description:
The default brightness level (index into the array defined by the
"brightness-levels" property).
$ref: /schemas/types.yaml#/definitions/uint32
additionalProperties: true
|
