; NOTE: Assertions have been autogenerated by utils/update_test_checks.py
;
; Test numbering remains continuous across:
; - InstCombine/fast-basictest.ll
; - PhaseOrdering/fast-basictest.ll
; - PhaseOrdering/fast-reassociate-gvn.ll
; - Reassociate/fast-basictest.ll
;
; RUN: opt < %s -passes=reassociate -S | FileCheck %s

; ((a + (-3)) + b) + 3 -> a + b
; That only works with both instcombine and reassociate passes enabled.
; Check that reassociate is not enough.

; TODO: check if we can eliminate zero add.
define float @test2(float %reg109, float %reg1111) {
; CHECK-LABEL: @test2(
; CHECK-NEXT:    [[REG116:%.*]] = fadd fast float [[REG109:%.*]], 0.000000e+00
; CHECK-NEXT:    [[REG117:%.*]] = fadd fast float [[REG116]], [[REG1111:%.*]]
; CHECK-NEXT:    ret float [[REG117]]
;
  %reg115 = fadd fast float %reg109, -3.000000e+01
  %reg116 = fadd fast float %reg115, %reg1111
  %reg117 = fadd fast float %reg116, 3.000000e+01
  ret float %reg117
}

define float @test2_no_FMF(float %reg109, float %reg1111) {
; CHECK-LABEL: @test2_no_FMF(
; CHECK-NEXT:    [[REG115:%.*]] = fadd float [[REG109:%.*]], -3.000000e+01
; CHECK-NEXT:    [[REG116:%.*]] = fadd float [[REG115]], [[REG1111:%.*]]
; CHECK-NEXT:    [[REG117:%.*]] = fadd float [[REG116]], 3.000000e+01
; CHECK-NEXT:    ret float [[REG117]]
;
  %reg115 = fadd float %reg109, -3.000000e+01
  %reg116 = fadd float %reg115, %reg1111
  %reg117 = fadd float %reg116, 3.000000e+01
  ret float %reg117
}

define float @test2_reassoc(float %reg109, float %reg1111) {
; CHECK-LABEL: @test2_reassoc(
; CHECK-NEXT:    [[REG115:%.*]] = fadd reassoc float [[REG109:%.*]], -3.000000e+01
; CHECK-NEXT:    [[REG116:%.*]] = fadd reassoc float [[REG115]], [[REG1111:%.*]]
; CHECK-NEXT:    [[REG117:%.*]] = fadd reassoc float [[REG116]], 3.000000e+01
; CHECK-NEXT:    ret float [[REG117]]
;
  %reg115 = fadd reassoc float %reg109, -3.000000e+01
  %reg116 = fadd reassoc float %reg115, %reg1111
  %reg117 = fadd reassoc float %reg116, 3.000000e+01
  ret float %reg117
}

@fe = external global float
@fa = external global float
@fb = external global float
@fc = external global float
@ff = external global float

; If two sums of the same operands in different order are counted with 'fast'
; flag and then stored to global variables, we can reuse the same value twice.
; Sums:
; - test3: (a+b)+c and (a+c)+b
; - test4: c+(a+b) and (c+a)+b
; - test5: c+(b+a) and (c+a)+b
;
; That only works with both gvn and reassociate passes enabled.
; Check that reassociate is not enough.

define void @test3() {
; CHECK-LABEL: @test3(
; CHECK-NEXT:    [[A:%.*]] = load float, ptr @fa, align 4
; CHECK-NEXT:    [[B:%.*]] = load float, ptr @fb, align 4
; CHECK-NEXT:    [[C:%.*]] = load float, ptr @fc, align 4
; CHECK-NEXT:    [[T1:%.*]] = fadd fast float [[B]], [[A]]
; CHECK-NEXT:    [[T2:%.*]] = fadd fast float [[T1]], [[C]]
; CHECK-NEXT:    [[T3:%.*]] = fadd fast float [[B]], [[A]]
; CHECK-NEXT:    [[T4:%.*]] = fadd fast float [[T3]], [[C]]
; CHECK-NEXT:    store float [[T2]], ptr @fe, align 4
; CHECK-NEXT:    store float [[T4]], ptr @ff, align 4
; CHECK-NEXT:    ret void
;
  %A = load float, ptr @fa
  %B = load float, ptr @fb
  %C = load float, ptr @fc
  %t1 = fadd fast float %A, %B
  %t2 = fadd fast float %t1, %C
  %t3 = fadd fast float %A, %C
  %t4 = fadd fast float %t3, %B
  ; e = (a+b)+c;
  store float %t2, ptr @fe
  ; f = (a+c)+b
  store float %t4, ptr @ff
  ret void
}

define void @test4() {
; CHECK-LABEL: @test4(
; CHECK-NEXT:    [[A:%.*]] = load float, ptr @fa, align 4
; CHECK-NEXT:    [[B:%.*]] = load float, ptr @fb, align 4
; CHECK-NEXT:    [[C:%.*]] = load float, ptr @fc, align 4
; CHECK-NEXT:    [[T1:%.*]] = fadd fast float [[B]], [[A]]
; CHECK-NEXT:    [[T2:%.*]] = fadd fast float [[T1]], [[C]]
; CHECK-NEXT:    [[T3:%.*]] = fadd fast float [[B]], [[A]]
; CHECK-NEXT:    [[T4:%.*]] = fadd fast float [[T3]], [[C]]
; CHECK-NEXT:    store float [[T2]], ptr @fe, align 4
; CHECK-NEXT:    store float [[T4]], ptr @ff, align 4
; CHECK-NEXT:    ret void
;
  %A = load float, ptr @fa
  %B = load float, ptr @fb
  %C = load float, ptr @fc
  %t1 = fadd fast float %A, %B
  %t2 = fadd fast float %C, %t1
  %t3 = fadd fast float %C, %A
  %t4 = fadd fast float %t3, %B
  ; e = c+(a+b)
  store float %t2, ptr @fe
  ; f = (c+a)+b
  store float %t4, ptr @ff
  ret void
}

define void @test5() {
; CHECK-LABEL: @test5(
; CHECK-NEXT:    [[A:%.*]] = load float, ptr @fa, align 4
; CHECK-NEXT:    [[B:%.*]] = load float, ptr @fb, align 4
; CHECK-NEXT:    [[C:%.*]] = load float, ptr @fc, align 4
; CHECK-NEXT:    [[T1:%.*]] = fadd fast float [[B]], [[A]]
; CHECK-NEXT:    [[T2:%.*]] = fadd fast float [[T1]], [[C]]
; CHECK-NEXT:    [[T3:%.*]] = fadd fast float [[B]], [[A]]
; CHECK-NEXT:    [[T4:%.*]] = fadd fast float [[T3]], [[C]]
; CHECK-NEXT:    store float [[T2]], ptr @fe, align 4
; CHECK-NEXT:    store float [[T4]], ptr @ff, align 4
; CHECK-NEXT:    ret void
;
  %A = load float, ptr @fa
  %B = load float, ptr @fb
  %C = load float, ptr @fc
  %t1 = fadd fast float %B, %A
  %t2 = fadd fast float %C, %t1
  %t3 = fadd fast float %C, %A
  %t4 = fadd fast float %t3, %B
  ; e = c+(b+a)
  store float %t2, ptr @fe
  ; f = (c+a)+b
  store float %t4, ptr @ff
  ret void
}

define float @test6(float %A, float %B, float %C) {
; CHECK-LABEL: @test6(
; CHECK-NEXT:    [[REASS_ADD1:%.*]] = fadd fast float [[C:%.*]], [[B:%.*]]
; CHECK-NEXT:    [[REASS_MUL2:%.*]] = fmul fast float [[A:%.*]], [[A]]
; CHECK-NEXT:    [[REASS_MUL:%.*]] = fmul fast float [[REASS_MUL2]], [[REASS_ADD1]]
; CHECK-NEXT:    ret float [[REASS_MUL]]
;
  %aa = fmul fast float %A, %A
  %aab = fmul fast float %aa, %B
  %ac = fmul fast float %A, %C
  %aac = fmul fast float %ac, %A
  %r = fadd fast float %aab, %aac
  ret float %r
}

define float @test6_reassoc(float %A, float %B, float %C) {
; CHECK-LABEL: @test6_reassoc(
; CHECK-NEXT:    [[AA:%.*]] = fmul reassoc float [[A:%.*]], [[A]]
; CHECK-NEXT:    [[AAB:%.*]] = fmul reassoc float [[AA]], [[B:%.*]]
; CHECK-NEXT:    [[AC:%.*]] = fmul reassoc float [[A]], [[C:%.*]]
; CHECK-NEXT:    [[AAC:%.*]] = fmul reassoc float [[A]], [[AC]]
; CHECK-NEXT:    [[R:%.*]] = fadd reassoc float [[AAB]], [[AAC]]
; CHECK-NEXT:    ret float [[R]]
;
  %aa = fmul reassoc float %A, %A
  %aab = fmul reassoc float %aa, %B
  %ac = fmul reassoc float %A, %C
  %aac = fmul reassoc float %ac, %A
  %r = fadd reassoc float %aab, %aac
  ret float %r
}

; (-X)*Y + Z -> Z-X*Y
define float @test7(float %X, float %Y, float %Z) {
; CHECK-LABEL: @test7(
; CHECK-NEXT:    [[B:%.*]] = fmul fast float [[Y:%.*]], [[X:%.*]]
; CHECK-NEXT:    [[TMP1:%.*]] = fsub fast float [[Z:%.*]], [[B]]
; CHECK-NEXT:    ret float [[TMP1]]
;
  %A = fsub fast float 0.0, %X
  %B = fmul fast float %A, %Y
  %C = fadd fast float %B, %Z
  ret float %C
}

define float @test7_unary_fneg(float %X, float %Y, float %Z) {
; CHECK-LABEL: @test7_unary_fneg(
; CHECK-NEXT:    [[B:%.*]] = fmul fast float [[Y:%.*]], [[X:%.*]]
; CHECK-NEXT:    [[TMP1:%.*]] = fsub fast float [[Z:%.*]], [[B]]
; CHECK-NEXT:    ret float [[TMP1]]
;
  %A = fneg fast float %X
  %B = fmul fast float %A, %Y
  %C = fadd fast float %B, %Z
  ret float %C
}

define float @test7_reassoc_nsz(float %X, float %Y, float %Z) {
; CHECK-LABEL: @test7_reassoc_nsz(
; CHECK-NEXT:    [[B:%.*]] = fmul reassoc nsz float [[Y:%.*]], [[X:%.*]]
; CHECK-NEXT:    [[TMP1:%.*]] = fsub reassoc nsz float [[Z:%.*]], [[B]]
; CHECK-NEXT:    ret float [[TMP1]]
;
  %A = fsub reassoc nsz float 0.0, %X
  %B = fmul reassoc nsz float %A, %Y
  %C = fadd reassoc nsz float %B, %Z
  ret float %C
}

; Verify that fold is not done only with 'reassoc' ('nsz' is required)
define float @test7_reassoc(float %X, float %Y, float %Z) {
; CHECK-LABEL: @test7_reassoc(
; CHECK-NEXT:    [[A:%.*]] = fsub reassoc float 0.000000e+00, [[X:%.*]]
; CHECK-NEXT:    [[B:%.*]] = fmul reassoc float [[A]], [[Y:%.*]]
; CHECK-NEXT:    [[C:%.*]] = fadd reassoc float [[B]], [[Z:%.*]]
; CHECK-NEXT:    ret float [[C]]
;
  %A = fsub reassoc float 0.0, %X
  %B = fmul reassoc float %A, %Y
  %C = fadd reassoc float %B, %Z
  ret float %C
}

; Integer version of:
;   (-X)*Y + Z -> Z-X*Y
; TODO: check if we can change the mul of -1 and the add to a sub.
define i32 @test7_int(i32 %X, i32 %Y, i32 %Z) {
; CHECK-LABEL: @test7_int(
; CHECK-NEXT:    [[A:%.*]] = mul i32 [[Y:%.*]], [[X:%.*]]
; CHECK-NEXT:    [[B:%.*]] = mul i32 [[A]], -1
; CHECK-NEXT:    [[C:%.*]] = add i32 [[B]], [[Z:%.*]]
; CHECK-NEXT:    ret i32 [[C]]
;
  %A = sub i32 0, %X
  %B = mul i32 %A, %Y
  %C = add i32 %B, %Z
  ret i32 %C
}

define float @test8(float %X) {
; CHECK-LABEL: @test8(
; CHECK-NEXT:    [[FACTOR:%.*]] = fmul fast float [[X:%.*]], 9.400000e+01
; CHECK-NEXT:    ret float [[FACTOR]]
;
  %Y = fmul fast float %X, 4.700000e+01
  %Z = fadd fast float %Y, %Y
  ret float %Z
}

; Side note: (x + x + x) and (3*x) each have only a single rounding.  So
; transforming x+x+x to 3*x is always safe, even without any FMF.
; To avoid that special-case, we have the addition of 'x' four times, here.
define float @test9(float %X) {
; CHECK-LABEL: @test9(
; CHECK-NEXT:    [[FACTOR:%.*]] = fmul fast float [[X:%.*]], 4.000000e+00
; CHECK-NEXT:    ret float [[FACTOR]]
;
  %Y = fadd fast float %X ,%X
  %Z = fadd fast float %Y, %X
  %W = fadd fast float %Z, %X
  ret float %W
}

define float @test10(float %W) {
; CHECK-LABEL: @test10(
; CHECK-NEXT:    [[FACTOR:%.*]] = fmul fast float [[W:%.*]], 3.810000e+02
; CHECK-NEXT:    ret float [[FACTOR]]
;
  %X = fmul fast float %W, 127.0
  %Y = fadd fast float %X ,%X
  %Z = fadd fast float %Y, %X
  ret float %Z
}

define float @test11(float %X) {
; CHECK-LABEL: @test11(
; CHECK-NEXT:    [[FACTOR:%.*]] = fmul fast float [[X:%.*]], -3.000000e+00
; CHECK-NEXT:    [[Z:%.*]] = fadd fast float [[FACTOR]], 6.000000e+00
; CHECK-NEXT:    ret float [[Z]]
;
  %A = fsub fast float 1.000000e+00, %X
  %B = fsub fast float 2.000000e+00, %X
  %C = fsub fast float 3.000000e+00, %X
  %Y = fadd fast float %A ,%B
  %Z = fadd fast float %Y, %C
  ret float %Z
}

define float @test12(float %X1, float %X2, float %X3) {
; CHECK-LABEL: @test12(
; CHECK-NEXT:    [[B:%.*]] = fmul fast float [[X2:%.*]], [[X1:%.*]]
; CHECK-NEXT:    [[C:%.*]] = fmul fast float [[X3:%.*]], [[X1]]
; CHECK-NEXT:    [[TMP1:%.*]] = fsub fast float [[C]], [[B]]
; CHECK-NEXT:    ret float [[TMP1]]
;
  %A = fsub fast float 0.000000e+00, %X1
  %B = fmul fast float %A, %X2   ; -X1*X2
  %C = fmul fast float %X1, %X3  ; X1*X3
  %D = fadd fast float %B, %C    ; -X1*X2 + X1*X3 -> X1*(X3-X2)
  ret float %D
}

define float @test12_unary_fneg(float %X1, float %X2, float %X3) {
; CHECK-LABEL: @test12_unary_fneg(
; CHECK-NEXT:    [[B:%.*]] = fmul fast float [[X2:%.*]], [[X1:%.*]]
; CHECK-NEXT:    [[C:%.*]] = fmul fast float [[X3:%.*]], [[X1]]
; CHECK-NEXT:    [[TMP1:%.*]] = fsub fast float [[C]], [[B]]
; CHECK-NEXT:    ret float [[TMP1]]
;
  %A = fneg fast float %X1
  %B = fmul fast float %A, %X2   ; -X1*X2
  %C = fmul fast float %X1, %X3  ; X1*X3
  %D = fadd fast float %B, %C    ; -X1*X2 + X1*X3 -> X1*(X3-X2)
  ret float %D
}

define float @test12_reassoc_nsz(float %X1, float %X2, float %X3) {
; CHECK-LABEL: @test12_reassoc_nsz(
; CHECK-NEXT:    [[B:%.*]] = fmul reassoc nsz float [[X2:%.*]], [[X1:%.*]]
; CHECK-NEXT:    [[C:%.*]] = fmul reassoc nsz float [[X3:%.*]], [[X1]]
; CHECK-NEXT:    [[TMP1:%.*]] = fsub reassoc nsz float [[C]], [[B]]
; CHECK-NEXT:    ret float [[TMP1]]
;
  %A = fsub reassoc nsz float 0.000000e+00, %X1
  %B = fmul reassoc nsz float %A, %X2   ; -X1*X2
  %C = fmul reassoc nsz float %X1, %X3  ; X1*X3
  %D = fadd reassoc nsz float %B, %C    ; -X1*X2 + X1*X3 -> X1*(X3-X2)
  ret float %D
}

; TODO: check if 'nsz' is technically required. Currently the optimization
; is not done with only 'reassoc' without 'nsz'.
define float @test12_reassoc(float %X1, float %X2, float %X3) {
; CHECK-LABEL: @test12_reassoc(
; CHECK-NEXT:    [[A:%.*]] = fsub reassoc float 0.000000e+00, [[X1:%.*]]
; CHECK-NEXT:    [[B:%.*]] = fmul reassoc float [[A]], [[X2:%.*]]
; CHECK-NEXT:    [[C:%.*]] = fmul reassoc float [[X1]], [[X3:%.*]]
; CHECK-NEXT:    [[D:%.*]] = fadd reassoc float [[B]], [[C]]
; CHECK-NEXT:    ret float [[D]]
;
  %A = fsub reassoc float 0.000000e+00, %X1
  %B = fmul reassoc float %A, %X2   ; -X1*X2
  %C = fmul reassoc float %X1, %X3  ; X1*X3
  %D = fadd reassoc float %B, %C    ; -X1*X2 + X1*X3 -> X1*(X3-X2)
  ret float %D
}

; (x1 * 47) + (x2 * -47) => (x1 - x2) * 47
; That only works with both instcombine and reassociate passes enabled.
; Check that reassociate is not enough.

define float @test13(float %X1, float %X2) {
; CHECK-LABEL: @test13(
; CHECK-NEXT:    [[B:%.*]] = fmul fast float [[X1:%.*]], 4.700000e+01
; CHECK-NEXT:    [[C:%.*]] = fmul fast float [[X2:%.*]], 4.700000e+01
; CHECK-NEXT:    [[TMP1:%.*]] = fsub fast float [[B]], [[C]]
; CHECK-NEXT:    ret float [[TMP1]]
;
  %B = fmul fast float %X1, 47.   ; X1*47
  %C = fmul fast float %X2, -47.  ; X2*-47
  %D = fadd fast float %B, %C     ; X1*47 + X2*-47 -> 47*(X1-X2)
  ret float %D
}

define float @test13_reassoc_nsz(float %X1, float %X2) {
; CHECK-LABEL: @test13_reassoc_nsz(
; CHECK-NEXT:    [[B:%.*]] = fmul reassoc nsz float [[X1:%.*]], 4.700000e+01
; CHECK-NEXT:    [[C:%.*]] = fmul reassoc nsz float [[X2:%.*]], 4.700000e+01
; CHECK-NEXT:    [[TMP1:%.*]] = fsub reassoc nsz float [[B]], [[C]]
; CHECK-NEXT:    ret float [[TMP1]]
;
  %B = fmul reassoc nsz float %X1, 47.   ; X1*47
  %C = fmul reassoc nsz float %X2, -47.  ; X2*-47
  %D = fadd reassoc nsz float %B, %C     ; X1*47 + X2*-47 -> 47*(X1-X2)
  ret float %D
}

define float @test13_reassoc(float %X1, float %X2) {
; CHECK-LABEL: @test13_reassoc(
; CHECK-NEXT:    [[B:%.*]] = fmul reassoc float [[X1:%.*]], 4.700000e+01
; CHECK-NEXT:    [[C:%.*]] = fmul reassoc float [[X2:%.*]], 4.700000e+01
; CHECK-NEXT:    [[TMP1:%.*]] = fsub reassoc float [[B]], [[C]]
; CHECK-NEXT:    ret float [[TMP1]]
;
  %B = fmul reassoc float %X1, 47.   ; X1*47
  %C = fmul reassoc float %X2, -47.  ; X2*-47
  %D = fadd reassoc float %B, %C     ; X1*47 + X2*-47 -> 47*(X1-X2)
  ret float %D
}

define float @test14(float %arg) {
; CHECK-LABEL: @test14(
; CHECK-NEXT:    [[T2:%.*]] = fmul fast float [[ARG:%.*]], 1.440000e+02
; CHECK-NEXT:    ret float [[T2]]
;
  %t1 = fmul fast float 1.200000e+01, %arg
  %t2 = fmul fast float %t1, 1.200000e+01
  ret float %t2
}

; TODO: check if we can transform the code with 'reassoc' only.
; The same IR is transformed to one fmul in instcombine pass.
define float @test14_reassoc(float %arg) {
; CHECK-LABEL: @test14_reassoc(
; CHECK-NEXT:    [[T1:%.*]] = fmul reassoc float [[ARG:%.*]], 1.200000e+01
; CHECK-NEXT:    [[T2:%.*]] = fmul reassoc float [[T1]], 1.200000e+01
; CHECK-NEXT:    ret float [[T2]]
;
  %t1 = fmul reassoc float 1.200000e+01, %arg
  %t2 = fmul reassoc float %t1, 1.200000e+01
  ret float %t2
}

; (b+(a+1234))+-a -> b+1234
; That only works with both instcombine and reassociate passes enabled.
; Check that reassociate is not enough.

; TODO: check if we can remove dead fsub.
define float @test15(float %b, float %a) {
; CHECK-LABEL: @test15(
; CHECK-NEXT:    [[TMP1:%.*]] = fsub fast float 0.000000e+00, [[A:%.*]]
; CHECK-NEXT:    [[TMP2:%.*]] = fadd fast float [[B:%.*]], 1.234000e+03
; CHECK-NEXT:    ret float [[TMP2]]
;
  %1 = fadd fast float %a, 1234.0
  %2 = fadd fast float %b, %1
  %3 = fsub fast float 0.0, %a
  %4 = fadd fast float %2, %3
  ret float %4
}

; TODO: check if we can remove dead fneg.
define float @test15_unary_fneg(float %b, float %a) {
; CHECK-LABEL: @test15_unary_fneg(
; CHECK-NEXT:    [[TMP1:%.*]] = fneg fast float [[A:%.*]]
; CHECK-NEXT:    [[TMP2:%.*]] = fadd fast float [[B:%.*]], 1.234000e+03
; CHECK-NEXT:    ret float [[TMP2]]
;
  %1 = fadd fast float %a, 1234.0
  %2 = fadd fast float %b, %1
  %3 = fneg fast float %a
  %4 = fadd fast float %2, %3
  ret float %4
}

; TODO: check if we can remove dead fsub.
define float @test15_reassoc_nsz(float %b, float %a) {
; CHECK-LABEL: @test15_reassoc_nsz(
; CHECK-NEXT:    [[TMP1:%.*]] = fsub reassoc nsz float 0.000000e+00, [[A:%.*]]
; CHECK-NEXT:    [[TMP2:%.*]] = fadd reassoc nsz float [[B:%.*]], 1.234000e+03
; CHECK-NEXT:    ret float [[TMP2]]
;
  %1 = fadd reassoc nsz float %a, 1234.0
  %2 = fadd reassoc nsz float %b, %1
  %3 = fsub reassoc nsz float 0.0, %a
  %4 = fadd reassoc nsz float %2, %3
  ret float %4
}

define float @test15_reassoc(float %b, float %a) {
; CHECK-LABEL: @test15_reassoc(
; CHECK-NEXT:    [[TMP1:%.*]] = fadd reassoc float [[A:%.*]], 1.234000e+03
; CHECK-NEXT:    [[TMP2:%.*]] = fadd reassoc float [[B:%.*]], [[TMP1]]
; CHECK-NEXT:    [[TMP3:%.*]] = fsub reassoc float 0.000000e+00, [[A]]
; CHECK-NEXT:    [[TMP4:%.*]] = fadd reassoc float [[TMP3]], [[TMP2]]
; CHECK-NEXT:    ret float [[TMP4]]
;
  %1 = fadd reassoc float %a, 1234.0
  %2 = fadd reassoc float %b, %1
  %3 = fsub reassoc float 0.0, %a
  %4 = fadd reassoc float %2, %3
  ret float %4
}

; Test that we can turn things like X*-(Y*Z) -> X*-1*Y*Z.
; That only works with both instcombine and reassociate passes enabled.
; Check that reassociate is not enough.

define float @test16(float %a, float %b, float %z) {
; CHECK-LABEL: @test16(
; CHECK-NEXT:    [[C:%.*]] = fmul fast float [[A:%.*]], 1.234500e+04
; CHECK-NEXT:    [[E:%.*]] = fmul fast float [[C]], [[B:%.*]]
; CHECK-NEXT:    [[F:%.*]] = fmul fast float [[E]], [[Z:%.*]]
; CHECK-NEXT:    [[TMP1:%.*]] = fadd fast float [[F]], 0.000000e+00
; CHECK-NEXT:    ret float [[TMP1]]
;
  %c = fsub fast float 0.000000e+00, %z
  %d = fmul fast float %a, %b
  %e = fmul fast float %c, %d
  %f = fmul fast float %e, 1.234500e+04
  %g = fsub fast float 0.000000e+00, %f
  ret float %g
}

define float @test16_unary_fneg(float %a, float %b, float %z) {
; CHECK-LABEL: @test16_unary_fneg(
; CHECK-NEXT:    [[E:%.*]] = fmul fast float [[A:%.*]], 1.234500e+04
; CHECK-NEXT:    [[F:%.*]] = fmul fast float [[E]], [[B:%.*]]
; CHECK-NEXT:    [[G:%.*]] = fmul fast float [[F]], [[Z:%.*]]
; CHECK-NEXT:    ret float [[G]]
;
  %c = fneg fast float %z
  %d = fmul fast float %a, %b
  %e = fmul fast float %c, %d
  %f = fmul fast float %e, 1.234500e+04
  %g = fneg fast float %f
  ret float %g
}

define float @test16_reassoc(float %a, float %b, float %z) {
; CHECK-LABEL: @test16_reassoc(
; CHECK-NEXT:    [[C:%.*]] = fsub reassoc float 0.000000e+00, [[Z:%.*]]
; CHECK-NEXT:    [[D:%.*]] = fmul reassoc float [[A:%.*]], [[B:%.*]]
; CHECK-NEXT:    [[E:%.*]] = fmul reassoc float [[D]], [[C]]
; CHECK-NEXT:    [[F:%.*]] = fmul reassoc float [[E]], 1.234500e+04
; CHECK-NEXT:    [[G:%.*]] = fsub reassoc float 0.000000e+00, [[F]]
; CHECK-NEXT:    ret float [[G]]
;
  %c = fsub reassoc float 0.000000e+00, %z
  %d = fmul reassoc float %a, %b
  %e = fmul reassoc float %c, %d
  %f = fmul reassoc float %e, 1.234500e+04
  %g = fsub reassoc float 0.000000e+00, %f
  ret float %g
}

; TODO: check if we can remove:
; - fadd fast x, 0
; ... as 'fast' implies 'nsz'
define float @test17(float %a, float %b, float %z) {
; CHECK-LABEL: @test17(
; CHECK-NEXT:    [[C:%.*]] = fmul fast float [[A:%.*]], 4.000000e+01
; CHECK-NEXT:    [[E:%.*]] = fmul fast float [[C]], [[Z:%.*]]
; CHECK-NEXT:    [[TMP1:%.*]] = fadd fast float [[E]], 0.000000e+00
; CHECK-NEXT:    ret float [[TMP1]]
;
  %d = fmul fast float %z, 4.000000e+01
  %c = fsub fast float 0.000000e+00, %d
  %e = fmul fast float %a, %c
  %f = fsub fast float 0.000000e+00, %e
  ret float %f
}

define float @test17_unary_fneg(float %a, float %b, float %z) {
; CHECK-LABEL: @test17_unary_fneg(
; CHECK-NEXT:    [[E:%.*]] = fmul fast float [[A:%.*]], 4.000000e+01
; CHECK-NEXT:    [[F:%.*]] = fmul fast float [[E]], [[Z:%.*]]
; CHECK-NEXT:    ret float [[F]]
;
  %d = fmul fast float %z, 4.000000e+01
  %c = fneg fast float %d
  %e = fmul fast float %a, %c
  %f = fneg fast float %e
  ret float %f
}

; With sub reassociation, constant folding can eliminate the 12 and -12 constants.
; TODO: check if we can remove fadd fast x, 0 as 'fast' implies 'nsz'
define float @test18(float %A, float %B) {
; CHECK-LABEL: @test18(
; CHECK-NEXT:    [[B_NEG:%.*]] = fneg fast float [[B:%.*]]
; CHECK-NEXT:    [[Y:%.*]] = fadd fast float [[A:%.*]], 0.000000e+00
; CHECK-NEXT:    [[Z:%.*]] = fadd fast float [[Y]], [[B_NEG]]
; CHECK-NEXT:    ret float [[Z]]
;
  %X = fadd fast float -1.200000e+01, %A
  %Y = fsub fast float %X, %B
  %Z = fadd fast float %Y, 1.200000e+01
  ret float %Z
}