//===- BufferDeallocation.cpp - the impl for buffer deallocation ----------===//
//
// Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
// See https://llvm.org/LICENSE.txt for license information.
// SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
//
//===----------------------------------------------------------------------===//
//
// This file implements logic for computing correct alloc and dealloc positions.
// Furthermore, buffer deallocation also adds required new clone operations to
// ensure that all buffers are deallocated. The main class is the
// BufferDeallocationPass class that implements the underlying algorithm. In
// order to put allocations and deallocations at safe positions, it is
// significantly important to put them into the correct blocks. However, the
// liveness analysis does not pay attention to aliases, which can occur due to
// branches (and their associated block arguments) in general. For this purpose,
// BufferDeallocation firstly finds all possible aliases for a single value
// (using the BufferViewFlowAnalysis class). Consider the following example:
//
// ^bb0(%arg0):
//   cf.cond_br %cond, ^bb1, ^bb2
// ^bb1:
//   cf.br ^exit(%arg0)
// ^bb2:
//   %new_value = ...
//   cf.br ^exit(%new_value)
// ^exit(%arg1):
//   return %arg1;
//
// We should place the dealloc for %new_value in exit. However, we have to free
// the buffer in the same block, because it cannot be freed in the post
// dominator. However, this requires a new clone buffer for %arg1 that will
// contain the actual contents. Using the class BufferViewFlowAnalysis, we
// will find out that %new_value has a potential alias %arg1. In order to find
// the dealloc position we have to find all potential aliases, iterate over
// their uses and find the common post-dominator block (note that additional
// clones and buffers remove potential aliases and will influence the placement
// of the deallocs). In all cases, the computed block can be safely used to free
// the %new_value buffer (may be exit or bb2) as it will die and we can use
// liveness information to determine the exact operation after which we have to
// insert the dealloc. However, the algorithm supports introducing clone buffers
// and placing deallocs in safe locations to ensure that all buffers will be
// freed in the end.
//
// TODO:
// The current implementation does not support explicit-control-flow loops and
// the resulting code will be invalid with respect to program semantics.
// However, structured control-flow loops are fully supported. Furthermore, it
// doesn't accept functions which return buffers already.
//
//===----------------------------------------------------------------------===//

#include "mlir/Dialect/Bufferization/Transforms/Passes.h"

#include "mlir/Dialect/Bufferization/IR/AllocationOpInterface.h"
#include "mlir/Dialect/Bufferization/IR/Bufferization.h"
#include "mlir/Dialect/Bufferization/Transforms/BufferUtils.h"
#include "mlir/Dialect/Func/IR/FuncOps.h"
#include "mlir/Dialect/MemRef/IR/MemRef.h"
#include "llvm/ADT/SetOperations.h"

namespace mlir {
namespace bufferization {
#define GEN_PASS_DEF_BUFFERDEALLOCATION
#include "mlir/Dialect/Bufferization/Transforms/Passes.h.inc"
} // namespace bufferization
} // namespace mlir

using namespace mlir;
using namespace mlir::bufferization;

/// Walks over all immediate return-like terminators in the given region.
static LogicalResult
walkReturnOperations(Region *region,
                     llvm::function_ref<LogicalResult(Operation *)> func) {
  for (Block &block : *region) {
    Operation *terminator = block.getTerminator();
    // Skip non region-return-like terminators.
    if (isRegionReturnLike(terminator)) {
      if (failed(func(terminator)))
        return failure();
    }
  }
  return success();
}

/// Checks if all operations that have at least one attached region implement
/// the RegionBranchOpInterface. This is not required in edge cases, where we
/// have a single attached region and the parent operation has no results.
static bool validateSupportedControlFlow(Operation *op) {
  WalkResult result = op->walk([&](Operation *operation) {
    // Only check ops that are inside a function.
    if (!operation->getParentOfType<func::FuncOp>())
      return WalkResult::advance();

    auto regions = operation->getRegions();
    // Walk over all operations in a region and check if the operation has at
    // least one region and implements the RegionBranchOpInterface. If there
    // is an operation that does not fulfill this condition, we cannot apply
    // the deallocation steps. Furthermore, we accept cases, where we have a
    // region that returns no results, since, in that case, the intra-region
    // control flow does not affect the transformation.
    size_t size = regions.size();
    if (((size == 1 && !operation->getResults().empty()) || size > 1) &&
        !dyn_cast<RegionBranchOpInterface>(operation)) {
      operation->emitError("All operations with attached regions need to "
                           "implement the RegionBranchOpInterface.");
    }

    return WalkResult::advance();
  });
  return !result.wasSkipped();
}

namespace {

//===----------------------------------------------------------------------===//
// Backedges analysis
//===----------------------------------------------------------------------===//

/// A straight-forward program analysis which detects loop backedges induced by
/// explicit control flow.
class Backedges {
public:
  using BlockSetT = SmallPtrSet<Block *, 16>;
  using BackedgeSetT = llvm::DenseSet<std::pair<Block *, Block *>>;

public:
  /// Constructs a new backedges analysis using the op provided.
  Backedges(Operation *op) { recurse(op); }

  /// Returns the number of backedges formed by explicit control flow.
  size_t size() const { return edgeSet.size(); }

  /// Returns the start iterator to loop over all backedges.
  BackedgeSetT::const_iterator begin() const { return edgeSet.begin(); }

  /// Returns the end iterator to loop over all backedges.
  BackedgeSetT::const_iterator end() const { return edgeSet.end(); }

private:
  /// Enters the current block and inserts a backedge into the `edgeSet` if we
  /// have already visited the current block. The inserted edge links the given
  /// `predecessor` with the `current` block.
  bool enter(Block &current, Block *predecessor) {
    bool inserted = visited.insert(&current).second;
    if (!inserted)
      edgeSet.insert(std::make_pair(predecessor, &current));
    return inserted;
  }

  /// Leaves the current block.
  void exit(Block &current) { visited.erase(&current); }

  /// Recurses into the given operation while taking all attached regions into
  /// account.
  void recurse(Operation *op) {
    Block *current = op->getBlock();
    // If the current op implements the `BranchOpInterface`, there can be
    // cycles in the scope of all successor blocks.
    if (isa<BranchOpInterface>(op)) {
      for (Block *succ : current->getSuccessors())
        recurse(*succ, current);
    }
    // Recurse into all distinct regions and check for explicit control-flow
    // loops.
    for (Region &region : op->getRegions()) {
      if (!region.empty())
        recurse(region.front(), current);
    }
  }

  /// Recurses into explicit control-flow structures that are given by
  /// the successor relation defined on the block level.
  void recurse(Block &block, Block *predecessor) {
    // Try to enter the current block. If this is not possible, we are
    // currently processing this block and can safely return here.
    if (!enter(block, predecessor))
      return;

    // Recurse into all operations and successor blocks.
    for (Operation &op : block.getOperations())
      recurse(&op);

    // Leave the current block.
    exit(block);
  }

  /// Stores all blocks that are currently visited and on the processing stack.
  BlockSetT visited;

  /// Stores all backedges in the format (source, target).
  BackedgeSetT edgeSet;
};

//===----------------------------------------------------------------------===//
// BufferDeallocation
//===----------------------------------------------------------------------===//

/// The buffer deallocation transformation which ensures that all allocs in the
/// program have a corresponding de-allocation. As a side-effect, it might also
/// introduce clones that in turn leads to additional deallocations.
class BufferDeallocation : public BufferPlacementTransformationBase {
public:
  using AliasAllocationMapT =
      llvm::DenseMap<Value, bufferization::AllocationOpInterface>;

  BufferDeallocation(Operation *op)
      : BufferPlacementTransformationBase(op), dominators(op),
        postDominators(op) {}

  /// Checks if all allocation operations either provide an already existing
  /// deallocation operation or implement the AllocationOpInterface. In
  /// addition, this method initializes the internal alias to
  /// AllocationOpInterface mapping in order to get compatible
  /// AllocationOpInterface implementations for aliases.
  LogicalResult prepare() {
    for (const BufferPlacementAllocs::AllocEntry &entry : allocs) {
      // Get the defining allocation operation.
      Value alloc = std::get<0>(entry);
      auto allocationInterface =
          alloc.getDefiningOp<bufferization::AllocationOpInterface>();
      // If there is no existing deallocation operation and no implementation of
      // the AllocationOpInterface, we cannot apply the BufferDeallocation pass.
      if (!std::get<1>(entry) && !allocationInterface) {
        return alloc.getDefiningOp()->emitError(
            "Allocation is not deallocated explicitly nor does the operation "
            "implement the AllocationOpInterface.");
      }

      // Register the current allocation interface implementation.
      aliasToAllocations[alloc] = allocationInterface;

      // Get the alias information for the current allocation node.
      for (Value alias : aliases.resolve(alloc)) {
        // TODO: check for incompatible implementations of the
        // AllocationOpInterface. This could be realized by promoting the
        // AllocationOpInterface to a DialectInterface.
        aliasToAllocations[alias] = allocationInterface;
      }
    }
    return success();
  }

  /// Performs the actual placement/creation of all temporary clone and dealloc
  /// nodes.
  LogicalResult deallocate() {
    // Add additional clones that are required.
    if (failed(introduceClones()))
      return failure();

    // Place deallocations for all allocation entries.
    return placeDeallocs();
  }

private:
  /// Introduces required clone operations to avoid memory leaks.
  LogicalResult introduceClones() {
    // Initialize the set of values that require a dedicated memory free
    // operation since their operands cannot be safely deallocated in a post
    // dominator.
    SetVector<Value> valuesToFree;
    llvm::SmallDenseSet<std::tuple<Value, Block *>> visitedValues;
    SmallVector<std::tuple<Value, Block *>, 8> toProcess;

    // Check dominance relation for proper dominance properties. If the given
    // value node does not dominate an alias, we will have to create a clone in
    // order to free all buffers that can potentially leak into a post
    // dominator.
    auto findUnsafeValues = [&](Value source, Block *definingBlock) {
      auto it = aliases.find(source);
      if (it == aliases.end())
        return;
      for (Value value : it->second) {
        if (valuesToFree.count(value) > 0)
          continue;
        Block *parentBlock = value.getParentBlock();
        // Check whether we have to free this particular block argument or
        // generic value. We have to free the current alias if it is either
        // defined in a non-dominated block or it is defined in the same block
        // but the current value is not dominated by the source value.
        if (!dominators.dominates(definingBlock, parentBlock) ||
            (definingBlock == parentBlock && isa<BlockArgument>(value))) {
          toProcess.emplace_back(value, parentBlock);
          valuesToFree.insert(value);
        } else if (visitedValues.insert(std::make_tuple(value, definingBlock))
                       .second)
          toProcess.emplace_back(value, definingBlock);
      }
    };

    // Detect possibly unsafe aliases starting from all allocations.
    for (BufferPlacementAllocs::AllocEntry &entry : allocs) {
      Value allocValue = std::get<0>(entry);
      findUnsafeValues(allocValue, allocValue.getDefiningOp()->getBlock());
    }
    // Try to find block arguments that require an explicit free operation
    // until we reach a fix point.
    while (!toProcess.empty()) {
      auto current = toProcess.pop_back_val();
      findUnsafeValues(std::get<0>(current), std::get<1>(current));
    }

    // Update buffer aliases to ensure that we free all buffers and block
    // arguments at the correct locations.
    aliases.remove(valuesToFree);

    // Add new allocs and additional clone operations.
    for (Value value : valuesToFree) {
      if (failed(isa<BlockArgument>(value)
                     ? introduceBlockArgCopy(cast<BlockArgument>(value))
                     : introduceValueCopyForRegionResult(value)))
        return failure();

      // Register the value to require a final dealloc. Note that we do not have
      // to assign a block here since we do not want to move the allocation node
      // to another location.
      allocs.registerAlloc(std::make_tuple(value, nullptr));
    }
    return success();
  }

  /// Introduces temporary clones in all predecessors and copies the source
  /// values into the newly allocated buffers.
  LogicalResult introduceBlockArgCopy(BlockArgument blockArg) {
    // Allocate a buffer for the current block argument in the block of
    // the associated value (which will be a predecessor block by
    // definition).
    Block *block = blockArg.getOwner();
    for (auto it = block->pred_begin(), e = block->pred_end(); it != e; ++it) {
      // Get the terminator and the value that will be passed to our
      // argument.
      Operation *terminator = (*it)->getTerminator();
      auto branchInterface = cast<BranchOpInterface>(terminator);
      SuccessorOperands operands =
          branchInterface.getSuccessorOperands(it.getSuccessorIndex());

      // Query the associated source value.
      Value sourceValue = operands[blockArg.getArgNumber()];
      if (!sourceValue) {
        return failure();
      }
      // Wire new clone and successor operand.
      // Create a new clone at the current location of the terminator.
      auto clone = introduceCloneBuffers(sourceValue, terminator);
      if (failed(clone))
        return failure();
      operands.slice(blockArg.getArgNumber(), 1).assign(*clone);
    }

    // Check whether the block argument has implicitly defined predecessors via
    // the RegionBranchOpInterface. This can be the case if the current block
    // argument belongs to the first block in a region and the parent operation
    // implements the RegionBranchOpInterface.
    Region *argRegion = block->getParent();
    Operation *parentOp = argRegion->getParentOp();
    RegionBranchOpInterface regionInterface;
    if (&argRegion->front() != block ||
        !(regionInterface = dyn_cast<RegionBranchOpInterface>(parentOp)))
      return success();

    if (failed(introduceClonesForRegionSuccessors(
            regionInterface, argRegion->getParentOp()->getRegions(), blockArg,
            [&](RegionSuccessor &successorRegion) {
              // Find a predecessor of our argRegion.
              return successorRegion.getSuccessor() == argRegion;
            })))
      return failure();

    // Check whether the block argument belongs to an entry region of the
    // parent operation. In this case, we have to introduce an additional clone
    // for buffer that is passed to the argument.
    SmallVector<RegionSuccessor, 2> successorRegions;
    regionInterface.getSuccessorRegions(/*index=*/std::nullopt,
                                        successorRegions);
    auto *it =
        llvm::find_if(successorRegions, [&](RegionSuccessor &successorRegion) {
          return successorRegion.getSuccessor() == argRegion;
        });
    if (it == successorRegions.end())
      return success();

    // Determine the actual operand to introduce a clone for and rewire the
    // operand to point to the clone instead.
    auto operands =
        regionInterface.getSuccessorEntryOperands(argRegion->getRegionNumber());
    size_t operandIndex =
        llvm::find(it->getSuccessorInputs(), blockArg).getIndex() +
        operands.getBeginOperandIndex();
    Value operand = parentOp->getOperand(operandIndex);
    assert(operand ==
               operands[operandIndex - operands.getBeginOperandIndex()] &&
           "region interface operands don't match parentOp operands");
    auto clone = introduceCloneBuffers(operand, parentOp);
    if (failed(clone))
      return failure();

    parentOp->setOperand(operandIndex, *clone);
    return success();
  }

  /// Introduces temporary clones in front of all associated nested-region
  /// terminators and copies the source values into the newly allocated buffers.
  LogicalResult introduceValueCopyForRegionResult(Value value) {
    // Get the actual result index in the scope of the parent terminator.
    Operation *operation = value.getDefiningOp();
    auto regionInterface = cast<RegionBranchOpInterface>(operation);
    // Filter successors that return to the parent operation.
    auto regionPredicate = [&](RegionSuccessor &successorRegion) {
      // If the RegionSuccessor has no associated successor, it will return to
      // its parent operation.
      return !successorRegion.getSuccessor();
    };
    // Introduce a clone for all region "results" that are returned to the
    // parent operation. This is required since the parent's result value has
    // been considered critical. Therefore, the algorithm assumes that a clone
    // of a previously allocated buffer is returned by the operation (like in
    // the case of a block argument).
    return introduceClonesForRegionSuccessors(
        regionInterface, operation->getRegions(), value, regionPredicate);
  }

  /// Introduces buffer clones for all terminators in the given regions. The
  /// regionPredicate is applied to every successor region in order to restrict
  /// the clones to specific regions.
  template <typename TPredicate>
  LogicalResult introduceClonesForRegionSuccessors(
      RegionBranchOpInterface regionInterface, MutableArrayRef<Region> regions,
      Value argValue, const TPredicate &regionPredicate) {
    for (Region &region : regions) {
      // Query the regionInterface to get all successor regions of the current
      // one.
      SmallVector<RegionSuccessor, 2> successorRegions;
      regionInterface.getSuccessorRegions(region.getRegionNumber(),
                                          successorRegions);
      // Try to find a matching region successor.
      RegionSuccessor *regionSuccessor =
          llvm::find_if(successorRegions, regionPredicate);
      if (regionSuccessor == successorRegions.end())
        continue;
      // Get the operand index in the context of the current successor input
      // bindings.
      size_t operandIndex =
          llvm::find(regionSuccessor->getSuccessorInputs(), argValue)
              .getIndex();

      // Iterate over all immediate terminator operations to introduce
      // new buffer allocations. Thereby, the appropriate terminator operand
      // will be adjusted to point to the newly allocated buffer instead.
      if (failed(walkReturnOperations(&region, [&](Operation *terminator) {
            // Get the actual mutable operands for this terminator op.
            auto terminatorOperands = *getMutableRegionBranchSuccessorOperands(
                terminator, region.getRegionNumber());
            // Extract the source value from the current terminator.
            // This conversion needs to exist on a separate line due to a bug in
            // GCC conversion analysis.
            OperandRange immutableTerminatorOperands = terminatorOperands;
            Value sourceValue = immutableTerminatorOperands[operandIndex];
            // Create a new clone at the current location of the terminator.
            auto clone = introduceCloneBuffers(sourceValue, terminator);
            if (failed(clone))
              return failure();
            // Wire clone and terminator operand.
            terminatorOperands.slice(operandIndex, 1).assign(*clone);
            return success();
          })))
        return failure();
    }
    return success();
  }

  /// Creates a new memory allocation for the given source value and clones
  /// its content into the newly allocated buffer. The terminator operation is
  /// used to insert the clone operation at the right place.
  FailureOr<Value> introduceCloneBuffers(Value sourceValue,
                                         Operation *terminator) {
    // Avoid multiple clones of the same source value. This can happen in the
    // presence of loops when a branch acts as a backedge while also having
    // another successor that returns to its parent operation. Note: that
    // copying copied buffers can introduce memory leaks since the invariant of
    // BufferDeallocation assumes that a buffer will be only cloned once into a
    // temporary buffer. Hence, the construction of clone chains introduces
    // additional allocations that are not tracked automatically by the
    // algorithm.
    if (clonedValues.contains(sourceValue))
      return sourceValue;
    // Create a new clone operation that copies the contents of the old
    // buffer to the new one.
    auto clone = buildClone(terminator, sourceValue);
    if (succeeded(clone)) {
      // Remember the clone of original source value.
      clonedValues.insert(*clone);
    }
    return clone;
  }

  /// Finds correct dealloc positions according to the algorithm described at
  /// the top of the file for all alloc nodes and block arguments that can be
  /// handled by this analysis.
  LogicalResult placeDeallocs() {
    // Move or insert deallocs using the previously computed information.
    // These deallocations will be linked to their associated allocation nodes
    // since they don't have any aliases that can (potentially) increase their
    // liveness.
    for (const BufferPlacementAllocs::AllocEntry &entry : allocs) {
      Value alloc = std::get<0>(entry);
      auto aliasesSet = aliases.resolve(alloc);
      assert(!aliasesSet.empty() && "must contain at least one alias");

      // Determine the actual block to place the dealloc and get liveness
      // information.
      Block *placementBlock =
          findCommonDominator(alloc, aliasesSet, postDominators);
      const LivenessBlockInfo *livenessInfo =
          liveness.getLiveness(placementBlock);

      // We have to ensure that the dealloc will be after the last use of all
      // aliases of the given value. We first assume that there are no uses in
      // the placementBlock and that we can safely place the dealloc at the
      // beginning.
      Operation *endOperation = &placementBlock->front();

      // Iterate over all aliases and ensure that the endOperation will point
      // to the last operation of all potential aliases in the placementBlock.
      for (Value alias : aliasesSet) {
        // Ensure that the start operation is at least the defining operation of
        // the current alias to avoid invalid placement of deallocs for aliases
        // without any uses.
        Operation *beforeOp = endOperation;
        if (alias.getDefiningOp() &&
            !(beforeOp = placementBlock->findAncestorOpInBlock(
                  *alias.getDefiningOp())))
          continue;

        Operation *aliasEndOperation =
            livenessInfo->getEndOperation(alias, beforeOp);
        // Check whether the aliasEndOperation lies in the desired block and
        // whether it is behind the current endOperation. If yes, this will be
        // the new endOperation.
        if (aliasEndOperation->getBlock() == placementBlock &&
            endOperation->isBeforeInBlock(aliasEndOperation))
          endOperation = aliasEndOperation;
      }
      // endOperation is the last operation behind which we can safely store
      // the dealloc taking all potential aliases into account.

      // If there is an existing dealloc, move it to the right place.
      Operation *deallocOperation = std::get<1>(entry);
      if (deallocOperation) {
        deallocOperation->moveAfter(endOperation);
      } else {
        // If the Dealloc position is at the terminator operation of the
        // block, then the value should escape from a deallocation.
        Operation *nextOp = endOperation->getNextNode();
        if (!nextOp)
          continue;
        // If there is no dealloc node, insert one in the right place.
        if (failed(buildDealloc(nextOp, alloc)))
          return failure();
      }
    }
    return success();
  }

  /// Builds a deallocation operation compatible with the given allocation
  /// value. If there is no registered AllocationOpInterface implementation for
  /// the given value (e.g. in the case of a function parameter), this method
  /// builds a memref::DeallocOp.
  LogicalResult buildDealloc(Operation *op, Value alloc) {
    OpBuilder builder(op);
    auto it = aliasToAllocations.find(alloc);
    if (it != aliasToAllocations.end()) {
      // Call the allocation op interface to build a supported and
      // compatible deallocation operation.
      auto dealloc = it->second.buildDealloc(builder, alloc);
      if (!dealloc)
        return op->emitError()
               << "allocations without compatible deallocations are "
                  "not supported";
    } else {
      // Build a "default" DeallocOp for unknown allocation sources.
      builder.create<memref::DeallocOp>(alloc.getLoc(), alloc);
    }
    return success();
  }

  /// Builds a clone operation compatible with the given allocation value. If
  /// there is no registered AllocationOpInterface implementation for the given
  /// value (e.g. in the case of a function parameter), this method builds a
  /// bufferization::CloneOp.
  FailureOr<Value> buildClone(Operation *op, Value alloc) {
    OpBuilder builder(op);
    auto it = aliasToAllocations.find(alloc);
    if (it != aliasToAllocations.end()) {
      // Call the allocation op interface to build a supported and
      // compatible clone operation.
      auto clone = it->second.buildClone(builder, alloc);
      if (clone)
        return *clone;
      return (LogicalResult)(op->emitError()
                             << "allocations without compatible clone ops "
                                "are not supported");
    }
    // Build a "default" CloneOp for unknown allocation sources.
    return builder.create<bufferization::CloneOp>(alloc.getLoc(), alloc)
        .getResult();
  }

  /// The dominator info to find the appropriate start operation to move the
  /// allocs.
  DominanceInfo dominators;

  /// The post dominator info to move the dependent allocs in the right
  /// position.
  PostDominanceInfo postDominators;

  /// Stores already cloned buffers to avoid additional clones of clones.
  ValueSetT clonedValues;

  /// Maps aliases to their source allocation interfaces (inverse mapping).
  AliasAllocationMapT aliasToAllocations;
};

//===----------------------------------------------------------------------===//
// BufferDeallocationPass
//===----------------------------------------------------------------------===//

struct DefaultAllocationInterface
    : public bufferization::AllocationOpInterface::ExternalModel<
          DefaultAllocationInterface, memref::AllocOp> {
  static std::optional<Operation *> buildDealloc(OpBuilder &builder,
                                                 Value alloc) {
    return builder.create<memref::DeallocOp>(alloc.getLoc(), alloc)
        .getOperation();
  }
  static std::optional<Value> buildClone(OpBuilder &builder, Value alloc) {
    return builder.create<bufferization::CloneOp>(alloc.getLoc(), alloc)
        .getResult();
  }
};

struct DefaultReallocationInterface
    : public bufferization::AllocationOpInterface::ExternalModel<
          DefaultAllocationInterface, memref::ReallocOp> {
  static std::optional<Operation *> buildDealloc(OpBuilder &builder,
                                                 Value realloc) {
    return builder.create<memref::DeallocOp>(realloc.getLoc(), realloc)
        .getOperation();
  }
};

/// The actual buffer deallocation pass that inserts and moves dealloc nodes
/// into the right positions. Furthermore, it inserts additional clones if
/// necessary. It uses the algorithm described at the top of the file.
struct BufferDeallocationPass
    : public bufferization::impl::BufferDeallocationBase<
          BufferDeallocationPass> {
  void getDependentDialects(DialectRegistry &registry) const override {
    registry.insert<bufferization::BufferizationDialect>();
    registry.insert<memref::MemRefDialect>();
    registerAllocationOpInterfaceExternalModels(registry);
  }

  void runOnOperation() override {
    func::FuncOp func = getOperation();
    if (func.isExternal())
      return;

    if (failed(deallocateBuffers(func)))
      signalPassFailure();
  }
};

} // namespace

LogicalResult bufferization::deallocateBuffers(Operation *op) {
  if (isa<ModuleOp>(op)) {
    WalkResult result = op->walk([&](func::FuncOp funcOp) {
      if (failed(deallocateBuffers(funcOp)))
        return WalkResult::interrupt();
      return WalkResult::advance();
    });
    return success(!result.wasInterrupted());
  }

  // Ensure that there are supported loops only.
  Backedges backedges(op);
  if (backedges.size()) {
    op->emitError("Only structured control-flow loops are supported.");
    return failure();
  }

  // Check that the control flow structures are supported.
  if (!validateSupportedControlFlow(op))
    return failure();

  // Gather all required allocation nodes and prepare the deallocation phase.
  BufferDeallocation deallocation(op);

  // Check for supported AllocationOpInterface implementations and prepare the
  // internal deallocation pass.
  if (failed(deallocation.prepare()))
    return failure();

  // Place all required temporary clone and dealloc nodes.
  if (failed(deallocation.deallocate()))
    return failure();

  return success();
}

void bufferization::registerAllocationOpInterfaceExternalModels(
    DialectRegistry &registry) {
  registry.addExtension(+[](MLIRContext *ctx, memref::MemRefDialect *dialect) {
    memref::AllocOp::attachInterface<DefaultAllocationInterface>(*ctx);
    memref::ReallocOp::attachInterface<DefaultReallocationInterface>(*ctx);
  });
}

//===----------------------------------------------------------------------===//
// BufferDeallocationPass construction
//===----------------------------------------------------------------------===//

std::unique_ptr<Pass> mlir::bufferization::createBufferDeallocationPass() {
  return std::make_unique<BufferDeallocationPass>();
}