1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
|
.TH PWMCONFIG 8 "January 27, 2005"
.SH NAME
pwmconfig \- tests the PWM outputs of sensors and configures fancontrol
.SH SYNOPSIS
.B pwmconfig
.SH DESCRIPTION
.B pwmconfig
searches your sensors for pulse width modulation (PWM)
controls, and tests each one to see if it controls a fan on
your motherboard. Note that many motherboards do not have PWM
circuitry installed, even if your sensor chip supports PWM.
It attempts to briefly stop each fan using the PWM controls. It then
attempts to restore each fan to full speed after testing. However, it
is \fBvery important\fP that you physically verify that the fans have
been returned to full speed after the program has completed.
.SH WARNING
This program will stop your fans, one at a time, for approximately 5 seconds each.
This may cause your processor temperature to rise. Verify that all fans are running
at normal speed after this program has exited.
.SH CONFORMING TO
lm_sensors-2.x
.SH SEE ALSO
fancontrol(8), sensors(1).
.SH AUTHOR
.PP
Marius Reiner <marius.reiner@hdev.de>
|
