.TH LOGROTATE 8 "Thu Aug 02 2001"
.UC 4
.SH NAME
logrotate \- rotates, compresses, and mails system logs
.SH SYNOPSIS
\fBlogrotate\fR [\fB\-dv\fR] [\fB\-f\fR|\fB\-\-force\fR]
[\fB\-s\fR|\fB-\-state\ \fIstatefile\fR] \fIconfig_file\fR ..
.SH DESCRIPTION
\fBlogrotate\fR is designed to ease administration of systems that generate
large numbers of log files.  It allows automatic rotation, compression, 
removal, and mailing of log files.  Each log file may be handled daily,
weekly, monthly, or when it grows too large.
.P
Normally, \fBlogrotate\fR is run as a daily cron job.  It will not modify
a log more than once in one day unless the criterion for that log is
based on the log's size and \fBlogrotate\fR is being run more than once
each day, or unless the \fB-f\fR or \fB-\-force\fR option is used. 
.P
Any number of config files may be given on the command line. Later config
files may override the options given in earlier files, so the order
in which the \fBlogrotate\fR config files are listed is important.
Normally, a single config file which includes any other config files
which are needed should be used.  See below for more information on how
to use the \fBinclude\fR directive to accomplish this.  If a directory
is given on the command line, every file in that directory is used as
a config file.
.P
If no command line arguments are given, \fBlogrotate\fR will print
version and copyright information, along with a short usage summary.  If
any errors occur while rotating logs, \fBlogrotate\fR will exit with
non-zero status.

.SH OPTIONS
.TP
\fB-d\fR
Turns on debug mode and implies \fB-v\fR.  In debug mode, no changes will
be made to the logs or to the \fBlogrotate\fR state file.

.TP
\fB-f\fR, \fB-\-force\fR
Tells \fBlogrotate\fR to force the rotation, even if it doesn't think
this is necessary.  Sometimes this is useful after adding new entries to
a \fBlogrotate\fR config file, or if old log files have been removed
by hand, as the new files will be created, and logging will continue
correctly.

.TP
\fB-s\fR, \fB-\-state\fR \fIstatefile\fR
Tells \fBlogrotate\fR to use an alternate state file.  This is useful
if \fBlogrotate\fR is being run as different users for various sets of
log files.  The default state file is \fI/var/lib/logrotate/status\fR.

.TP
\fB-\-usage\fR
Prints a short usage message.

.TP
\fB-v\fR, \fB--verbose\fR
Display messages during rotation.


.SH CONFIGURATION FILE

\fBlogrotate\fR reads everything about the log files it should be handling
from the series of configuration files specified on the command line.  Each
configuration file can set global options (local definitions override
global ones, and later definitions override earlier ones) and specify
some logfiles to rotate. A simple configuration file looks like this:

.nf
.ta +3i
# sample logrotate configuration file
compress

/var/log/messages {
    rotate 5
    weekly
    postrotate
        /sbin/killall -HUP syslogd
    endscript
}

"/var/log/httpd/access.log" /var/log/httpd/error.log {
    rotate 5
    mail www@my.org
    size=100k
    sharedscripts
    postrotate
        /sbin/killall -HUP httpd
    endscript
}

/var/log/news/* {
    monthly
    rotate 2
    missingok
    postrotate
        kill -HUP `cat /var/run/inn.pid`
    endscript
    nocompress
}
.fi

.pp
The first few lines set global options; in the example, logs are
compressed after they are rotated.  Note that comments may appear
anywhere in the config file as long as the first non-whitespace
character on the line is a \fB#\fR.

The next section of the config file defines how to handle the log file
\fI/var/log/messages\fR. The log will go through five weekly rotations before
being removed. After the log file has been rotated (but before the old
version of the log has been compressed), the command 
\fI/sbin/killall -HUP syslogd\fR will be executed.

The next section defines the parameters for both
\fI/var/log/httpd/access.log\fR and \fI/var/log/httpd/error.log\fR.
Each is rotated whenever it grows over 100k in size, and the old logs
files are mailed (uncompressed) to www@my.org after going through 5
rotations, rather then being removed. The \fBsharedscripts\fR means that
the \fBpostrotate\fR script will only be run once, not once for each
log which is rotated. Note that log file names may be enclosed in
quotes (and that quotes are required if the name contains spaces).
Normal shell quoting rules apply, with \fB'\fR, \fB"\fR, and \fB\\\fR
characters supported.

The last section defines the parameters for all of the files in
\fI/var/log/news\fR. Each file is rotated on a monthly basis.  This is
considered a single rotation directive and if errors occur for more then
one file, the log files are not compressed.

If the directory \fI/var/log/news\fR does not exist, this will cause 
\fBlogrotate\fR to report an error. This error cannot be stopped with
the \fBmissingok\fR directive.

Here is more information on the directives which may be included in
a \fBlogrotate\fR configuration file:

.TP
\fBcompress\fR
Old versions of log files are compressed with \fBgzip\fR(1) by default.
See also \fBnocompress\fR. 

.TP
\fBcompresscmd\fR
Specifies which command to use to compress log files.  The default is
\fBgzip\fR(1).  See also \fBcompress\fR.

.TP
\fBuncompresscmd\fR
Specifies which command to use to uncompress log files.  The default is
\fBgunzip\fR(1).

.TP
\fBcompressext\fR
Specifies which extension to use on compressed logfiles, if compression
is enabled.  The default follows that of the configured compression
command.

.TP
\fBcompressoptions\fR
Command line options may be passed to the compression program, if one is
in use.  The default, for \fBgzip\fR, is "-9" (maximum compression).

.TP
\fBcopytruncate\fR
Truncate the original log file to zero size in place after creating a copy,
instead of moving the old log file and optionally creating a new one.
It can be used when some program cannot be told to close its logfile
and thus might continue writing (appending) to the previous log file forever.
Note that there is a very small time slice between copying the file and
truncating it, so some logging data might be lost.
When this option is used, the \fBcreate\fR option will have no effect,
as the old log file stays in place.

.TP
\fBcreate \fImode\fR \fIowner\fR \fIgroup\fR
Immediately after rotation (before the \fBpostrotate\fR script is run)
the log file is created (with the same name as the log file just rotated).
\fImode\fR specifies the mode for the log file in octal (the same
as \fBchmod\fR(2)), \fIowner\fR specifies the user name who will own the
log file, and \fIgroup\fR specifies the group the log file will belong
to. Any of the log file attributes may be omitted, in which case those
attributes for the new file will use the same values as the original log
file for the omitted attributes. This option can be disabled using the
\fBnocreate\fR option.

.TP
\fBdaily\fR
Log files are rotated every day.

.TP
\fBdelaycompress\fR
Postpone compression of the previous log file to the next rotation cycle.
This only has effect when used in combination with \fBcompress\fR.
It can be used when some program cannot be told to close its logfile
and thus might continue writing to the previous log file for some time.

.TP
\fBextension \fIext\fR
Log files are given the final extension \fIext\fR after rotation. If 
compression is used, the compression extension (normally \fI.gz\fR)
appears after \fIext\fR.

.TP
\fBifempty\fR
Rotate the log file even if it is empty, overriding the \fBnotifempty\fR
option (\fBifempty\fR is the default).

.TP
\fBinclude \fIfile_or_directory\fR
Reads the file given as an argument as if it was included inline where
the \fBinclude\fR directive appears. If a directory is given, most of the
files in that directory are read before processing of the including file
continues. The only files which are ignored are files which are not regular
files (such as directories and named pipes) and files whose names end
with one of the taboo extensions, as specified by the \fBtabooext\fR
directive.  The \fBinclude\fR directive may not appear inside a log
file definition.

.TP
\fBmail \fIaddress\fR
When a log is rotated out of existence, it is mailed to \fIaddress\fR. If
no mail should be generated by a particular log, the \fBnomail\fR directive
may be used.

.TP
\fBmailfirst\fR
When using the \fBmail\fR command, mail the just-rotated file,
instead of the about-to-expire file.

.TP
\fBmaillast\fR
When using the \fBmail\fR command, mail the about-to-expire file,
instead of the just-rotated file (this is the default).

.TP
\fBmissingok\fR
If the log file is missing, go on to the next one without issuing an error
message. See also \fBnomissingok\fR.

.TP
\fBmonthly\fR
Log files are rotated the first time \fBlogrotate\fR is run in a month 
(this is normally on the first day of the month).

.TP
\fBnocompress\fR
Old versions of log files are not compressed. See also \fBcompress\fR. 

.TP
\fBnocopytruncate\fR
Do not truncate the original log file in place after creating a copy
(this overrides the \fBcopytruncate\fR option).

.TP
\fBnocreate\fR
New log files are not created (this overrides the \fBcreate\fR option).

.TP
\fBnodelaycompress\fR
Do not postpone compression of the previous log file to the next rotation cycle
(this overrides the \fBdelaycompress\fR option).

.TP
\fBnomail\fR
Do not mail old log files to any address.

.TP
\fBnomissingok\fR
If a log file does not exist, issue an error. This is the default.

.TP
\fBnoolddir\fR
Logs are rotated in the directory they normally reside in (this 
overrides the \fBolddir\fR option).

.TP
\fBnosharedscripts\fR
Run \fBprerotate\fR and \fBpostrotate\fR scripts for every log that
is rotated (this is the default, and overrides the \fBsharedscripts\fR
option).

.TP
\fBnotifempty\fR
Do not rotate the log if it is empty (this overrides the \fBifempty\fR option).

.TP
\fBolddir \fIdirectory\fR
Logs are moved into \fIdirectory\fR for rotation. The \fIdirectory\fR must
be on the same physical device as the log file being rotated. When this
option is used all old versions of the log end up in \fIdirectory\fR.  This
option may be overridden by the \fBnoolddir\fR option.

.TP
\fBpostrotate\fR/\fBendscript\fR
The lines between \fBpostrotate\fR and \fBendscript\fR (both of which
must appear on lines by themselves) are executed after the log file is
rotated. These directives may only appear inside a log file definition.
See also \fBprerotate\fR.

.TP
\fBprerotate\fR/\fBendscript\fR
The lines between \fBprerotate\fR and \fBendscript\fR (both of which
must appear on lines by themselves) are executed before the log file is
rotated. These directives may only appear inside a log file definition.
See also \fBpostrotate\fR.

.TP
\fBrotate \fIcount\fR
Log files are rotated \fIcount\fR times before being removed or mailed to the
address specified in a \fBmail\fR directive. If \fIcount\fR is 0, old versions
are removed rather then rotated.

.TP
\fBsharedscripts\fR
Normally, \fBprerotate\fR and \fBpostrotate\fR scripts are run for each
log which is rotated, meaning that a single script may be run multiple
times for log file entries which match multiple files (such as the 
\fI/var/log/news/*\fR example). If \fBsharedscript\fR is specified, the scripts
are only run once, no matter how many logs match the wildcarded pattern.
A side effect of this option is that the scripts are always executed, even
if no logs are rotated. If this directive is not specified, the scripts
are run only if logs are actually rotated. This overrides the
\fBnosharedscripts\fR option.

.TP
\fBsize \fIsize\fR[\fBM\fR|\fBk\fR]
Log files are rotated when they grow bigger than \fIsize\fR bytes. If
\fIsize\fR is followed by \fBM\fR, the size is assumed to be in megabytes.
If \fBk\fR is used, the size is in kilobytes. So \fBsize 100\fR,
\fBsize 100k\fR, and \fBsize 100M\fR are all valid.

.TP
\fBtabooext\fR [\fB+\fR] \fIlist\fR
The current taboo extension list is changed (see the \fBinclude\fR directive
for information on the taboo extensions). If \fB+\fR precedes \fIlist\fR,
the current taboo extension list is augmented by \fIlist\fR, otherwise 
it is replaced. At startup, the taboo extension list 
contains .rpmorig, .rpmsave, .dpkg-dist, .dpkg-old, .dpkg-new, .disabled,
,v, .swp, .rpmnew, and ~. The members of the list are separated by spaces,
not commas.

.TP
\fBweekly\fR
Log files are rotated if the current weekday is less than the weekday
of the last rotation or if more than a week has passed since the last
rotation. This is normally the same as rotating logs on the first day
of the week, but works better if \fBlogrotate\fR is not run every
night.

.SH FILES
.PD 0
.TP 27
\fI/var/lib/logrotate/status\fR
Default state file.
.TP 27
\fI/etc/logrotate.conf\fR
Configuration options.

.SH SEE ALSO
.BR gzip (1)

.SH NOTES
The \fBkillall\fR(1) program in Debian is found in the \fIpsmisc\fR package.

.SH AUTHORS
.nf
Erik Troan <ewt@redhat.com>
.nf
Preston Brown <pbrown@redhat.com>
.fi