Logswan 2.1.15 (2025-03-24)

- Add link to Gentoo package in the README
- Add initial RPM spec file
- Bump cmake_minimum_required to 3.5, to allow building with CMake 4.0
- Bump cmake_minimum_required to 3.10 to be more future proof



Logswan 2.1.14 (2023-03-30)

- Add missing void to the usage() function definition
- Move manual page to the man directory



Logswan 2.1.13 (2022-07-28)

- Remove useless backslashes in usage()
- Add entries with IPv6 remote hosts to exercise the IPv6 code paths
- Add an invalid.log log file with invalid lines, for testing purposes
- Add a few more test cases in CMakeLists.txt
- Also generate data for IPv6 addresses in the MMDB test database
- Regenerate the example MMDB database and JSON example output



Logswan 2.1.12 (2021-12-02)

- Fix a use-after-free (read) triggered by strcmp(3) calls.

  The parse_request() function didn't zero out the parsed_request struct
  between each call. Since the parsing loop was switched to using getline(3)
  instead of a fixed size buffer to process log lines, it could reference
  already freed memory in certain cases.

  Thanks to Brian Carpenter (@geeknik) for finding and reporting the issue.



Logswan 2.1.11 (2021-11-16)

- Bump CMake minimum required version to 2.8.12
- Add SPDX short license identifier in source files
- Use CMAKE_C_STANDARD instead of hardcoding compiler flags
- Switch to using getline(3) instead of fgets(3)
- Call hll_init() after doing getopt() processing



Logswan 2.1.10 (2021-02-15)

- Only call MMDB_close if the GeoIP option was enabled. This fixes a
  crash on program exit on OpenBSD when running without the GeoIP
  option enabled.



Logswan 2.1.9 (2021-02-15)

- Stop forcing FORTIFY_SOURCE=2, it should be package builders decision
- Add link to Homebrew package in the README
- Remove unused countryId variable
- Remove dead increments for argc and argv
- Rename variables to get rid of all camelCase occurrences
- Remove the measuring Logswan memory usage section from the README
- Try to harmonize usage information everywhere
- Rename the displayUsage() function to usage()
- Rename all the parse*() functions to use snake_case
- Get rid of global variables, move all declarations to main()



Logswan 2.1.8 (2020-10-19)

- Make displayUsage() static
- Removing some leading whitespace characters
- Constify methods and protocols names array
- Constify countries and continents names and ID arrays
- Enable FORTIFY_SOURCE level 2
- Call memset() to set all entry_data struct fields to zero



Logswan 2.1.7 (2020-09-17)

- Add a Perl program to generate an example MMDB database for testing
- Add a new test case to exercise the IP geolocation codepaths
- Add support for seccomp on arm
- Add missing test for __NR_mmap, the mmap syscall doesn't exist on arm



Logswan 2.1.6 (2020-07-03)

- Validate architectures for seccomp
- Minor code shuffling, for consistency with other codebases
- Add seccomp support on i386, tested on glibc and musl
- Remove entry for "Netherlands Antilles" in country table
- Swaziland was officially renamed to Eswatini in 2018
- Macedonia was officially renamed to North Macedonia in February 2019
- Rename Vatican City to Vatican to be consistent with GeoNames naming
- Rename Aland to Aland Islands to be consistent with GeoNames naming



Logswan 2.1.5 (2020-06-12)

- Switch the GEOIP2DIR example to point to '/var/db/dbip'
- Use CLOCK_REALTIME if CLOCK_MONOTONIC is not available
- Remove unneeded <sys/select.h> and <sys/types.h> includes
- Add missing <stddef.h> include
- Remove useless _POSIX_SOURCE define
- Remove useless _POSIX_C_SOURCE 199309L define
- Define _GNU_SOURCE in CMakeLists.txt to avoid cluttering source files
- No need to set HAVE_SECCOMP to 1, defining it is enough
- Remove some unneeded seccomp related includes



Logswan 2.1.4 (2020-03-27)

- Move GEOIP2DB definition to CMakeLists.txt, allowing build time
  customization
- Display database path name in error message
- Remove direct link to GeoLite2 databases
- Add dependencies installation instruction for Fedora
- Change GEOIP2DB default value to "dbip-country-lite.mmdb"
- Change GEOIP2DIR default value to "${CMAKE_INSTALL_PREFIX}/share/dbip"
- Mention that DB-IP IP to Country Lite database is now the recommended option



Logswan 2.1.3 (2020-01-17)

- Add a new test target, to test log processing
- Move printed statistics after the actual output
- Use OpenBSD style(9) for function prototypes and declarations
- Remove seccomp mention in README as it is currently disabled by default



Logswan 2.1.2 (2019-11-19)

- Add ENABLE_SECCOMP build option, to allow building seccomp support
  conditionally
- Disable seccomp by default, it needs more testing on non !amd64 platforms
- Use ${CMAKE_INSTALL_BINDIR} instead of hardcoding 'bin'



Logswan 2.1.1 (2019-10-30)

- Check if system has seccomp in CMakeLists.txt
- Use the HAVE_SECCOMP macro to check whether or not to enable seccomp
- Define and use a GEOIP2DB macro to specify GeoLite2 database name
- Add a switch (-d) to allow specifying path to a GeoIP2 database file
- Define and use a LOGSWAN_SYSCALL_ALLOW macro to make code more readable
- Adding missing #include guard in seccomp.h header file
- Use __NR_ instead of SYS_ prefix in LOGSWAN_SYSCALL_ALLOW
- Fix the build on aarch64 Linux, where the open() syscall does not exist
- Add error checking for both prctl() calls



Logswan 2.1.0 (2019-10-23)

- Add FALLTHROUGH comments where appropriate
- Add support for parsing HTTP/3 requests
- Add initial seccomp support on Linux, tested on musl and glibc systems



Logswan 2.0.4 (2019-08-16)

- Adding #include guard in compat header file
- Add an example log file and regenerate output example
- Add dependencies installation instructions for NetBSD and FreeBSD
- Add final dots for options descriptions
- Add final dot when printing results summary
- Use EXIT_SUCCESS and EXIT_FAILURE macros for return values
- Add a trailing newline when printing JSON output



Logswan 2.0.3 (2018-10-15)

- Use -std=c11, Logswan requires a C11 compiler for libmaxminddb
- Enable support for parsing HTTP/2.0 requests, for real this time
- Revert back to using INT64_MAX for strtonum() maxval, as maxval is long long
  and using UINT64_MAX caused bandwidth parsing to always fail (Thanks James Loh
  for reporting the issue)
- Move maps of countries and continents to separate files



Logswan 2.0.2 (2018-08-05)

- Use UINT64_MAX for strtonum() maxval
- Add missing headers and reorder includes
- Add support for HTTP/2.0



Logswan 2.0.1 (2018-06-27)

- Do not use -Werror by default
- Do not always call inet_pton two times per log line, this speeds things up
- Use bool types for isIPv4 and isIPv6
- Use the monotonic clock to determine runtime
- Move conditional includes for 'pledge' and 'strtonum' in compat.h



Logswan 2.0.0 (2018-03-16)

- Use type off_t for results struct member fileSize
- Reflect OpenBSD's pledge() changes
- Switch to using libmaxminddb and GeoIP2/GeoLite2 databases
- Add Antarctica to the list of continents



Logswan 1.07 (2017-02-14)

- Harmonize arrays names
- Remove array of months, it's currently unused and will likely remain so
- Simplify internal JSON array and object names
- Use OpenBSD style(9) for function prototypes and declarations
- Revert back to using strtok, at least for now
- Do not use EXIT_SUCCESS and EXIT_FAILURE macros anymore
- Fix implicit function declaration error on NetBSD (Thanks Maya Rashish)
- Remove now useless variables initialization and unnecessary includes
- Do not add an extra new line when displaying usage or version



Logswan 1.06 (2016-12-17)

- Relicensed under the BSD 2-Clause license
- Use strtok_r instead of strtok to tokenize lines
- Do not attempt to increment countries and continents arrays if there
  is no GeoIP database loaded
- Harmonize variable names for the GeoIP databases
- GeoIP lookups are now disabled by default (add a -g switch to enable)
- Use fstat on open file descriptor instead of using stat before opening
  the input file
- Count the log line as invalid if parsedLine.remoteHost is NULL
- Pass results structure by reference, not by value
- Initialize some uninitialized variables
- Headers cleanup



Logswan 1.05 (2016-02-25)

- Documentation update (notes on measuring Logswan memory usage)
- Add additional include directories for compat functions + dependencies
  to avoid using relative path in includes
- Check that *lineBuffer is not NUL before attempting to parse log line
- Perform GeoIP lookup and HLL add in the same if block
- Increment IPv4 and IPv6 hits counters individually and conditionally
- Use CMake to check if the system has OpenBSD's pledge available and
  link pledge conditionally using a null implementation when compiled
  on non OpenBSD systems
- Adding an array of months, for the upcoming split log functionalities



Logswan 1.04 (2016-01-10)

- Moving global variables into main
- Using 'size_t' instead of 'int' for array indexes in for loops
- Using 'uint32_t' for all non 'uint64_t' integers
- Do not increment hits and processed lines counter for each parsed line,
  compute total only once when everything is parsed
- Setting 'CMAKE_BUILD_TYPE' to 'Release' and formatting fixes
- Sanitize CMake script to build under NetBSD (Thanks Kamil Rytarowski)
- Initializing some uninitialized variables
- Renaming 'DATADIR' variables to 'GEOIPDIR'



Logswan 1.03 (2016-01-01)

- Remove header display and do not print name of processed file
- Print results to stderr instead of stdout
- Output JSON data to stdout instead of creating a new file
- Define GeoIP databases path in CMakeLists.txt
- Adding log file name in the JSON output
- Removing some hardcoded values and replacing them with constants
  defined in config.h
- Breaking the loop when a match is found in the request parser
- Using enumeration constants instead of macros
- Process GeoIP continent information
- Re-ordering protocols and methods with more common occurrences on top of
  the list, allowing to break earlier when iterating through the array
- Adding support for reading logs from standard input
- Renaming 'definitions' files to 'config'
- Increasing countries array size, as an attempt to be future-proof
- Initial support for using pledge() on OpenBSD
- Documentation updates (HLL precision, Features list, GeoIP databases)
- Updated JSON output example
- Added a manual page



Logswan 1.02 (2015-11-02)

- Renaming 'resource' variable to 'request' in the 'logLine' struct
- Do not attempt to parse empty date tokens
- Do not attempt to parse empty request tokens (Thanks Brian Carpenter for
reporting the issue)



Logswan 1.01 (2015-10-01)

- Documentation updates
- Fixing segfault when request data is empty or malformed (Thanks Jonathan
  Armani for reporting and proposing a fix)



Logswan 1.00 (2015-09-28)

- Initial release