########################################################
# Please file all bug reports, patches, and feature
# requests under:
#      https://sourceforge.net/p/logwatch/_list/tickets
# Help requests and discusion can be filed under:
#      https://sourceforge.net/p/logwatch/discussion/
########################################################

#######################################################
## Copyright (c) 2008 Bob Hutchinson
## Covered under the included MIT/X-Consortium License:
##    http://www.opensource.org/licenses/mit-license.php
## All modifications and contributions by other persons to
## this script are assumed to have been donated to the
## Logwatch project and thus assume the above copyright
## and licensing terms.  If you want to make contributions
## under your own copyright or a different license this
## must be explicitly stated in the contribution an the
## Logwatch project reserves the right to not accept such
## contributions.  If you have made significant
## contributions to this script and want to claim
## copyright please contact logwatch-devel@lists.sourceforge.net.
#########################################################
use strict;

my $Detail = $ENV{'LOGWATCH_DETAIL_LEVEL'};
my $QmailDetail = $ENV{'qmail_high_detail'};
my $QmailThreshold = $ENV{'threshold'};
my $RemoteThreshold = $ENV{'remote_threshold'};
my $LocalThreshold  = $ENV{'local_threshold'};
my $FromThreshold   = $ENV{'from_threshold'};

#Init String Container
my (
$DeliveryResponse,      $EmailFrom,     $IgnoreUnmatched,
$Response,              $ResponseCode,  $ServerResponseOverallTotal,
$ServerResponses,       $ToLocal,       $ToRemote,
$ct,                    $msgid,         $percentage,
$threshold_reached,     $triplebounce,  $warning,
);
#Init Hashes
my (
%From,                  %Local,         %Remote,
%ServerResponseTotal,   %TripleBounce,  %Warning,
);
#Init Arrays
my @OtherList = ();

#Init Info Hashes
my %SmtpCode;
my %ErrorCode;

$SmtpCode{'211'} = "System status, or system help reply.";
$SmtpCode{'214'} = "Help message.";
$SmtpCode{'220'} = "Domain service ready. Ready to start TLS.";
$SmtpCode{'221'} = "Domain service closing transmission channel.";
$SmtpCode{'250'} = "Requested mail action OK, completed.";
$SmtpCode{'251'} = "User not local, will forward to forwardpath.";
$SmtpCode{'252'} = "Cannot VRFY user, but will take message for this user and attempt delivery.";
$SmtpCode{'253'} = "OK, messages pending messages for node node started.";
$SmtpCode{'354'} = "Start mail input; end with <CRLF>.<CRLF>.";
$SmtpCode{'355'} = "Octet-offset is the transaction offset.";
$SmtpCode{'421'} = "Domain service not available, closing transmission channel.";
$SmtpCode{'432'} = "A password transition is needed.";
$SmtpCode{'450'} = "Requested mail action not taken: mailbox unavailable. ATRN request refused.";
$SmtpCode{'451'} = "Requested action aborted: local error in processing. Unable to process ATRN request now";
$SmtpCode{'452'} = "Requested action not taken: insufficient system storage.";
$SmtpCode{'453'} = "You have no mail.";
$SmtpCode{'454'} = "TLS not available due to temporary reason. Encryption required for requested authentication mechanism.";
$SmtpCode{'458'} = "Unable to queue messages for node node.";
$SmtpCode{'459'} = "Node node not allowed: reason.";
$SmtpCode{'500'} = "Command not recognized: command Syntax error.";
$SmtpCode{'501'} = "Syntax error, no parameters allowed.";
$SmtpCode{'502'} = "Command not implemented.";
$SmtpCode{'503'} = "Bad sequence of commands.";
$SmtpCode{'504'} = "Command parameter not implemented.";
$SmtpCode{'511'} = "Bad destination mailbox address";
$SmtpCode{'521'} = "Machine does not accept mail.";
$SmtpCode{'530'} = "Must issue a STARTTLS command first. Encryption required for requested authentication mechanism.";
$SmtpCode{'534'} = "Authentication mechanism is too weak.";
$SmtpCode{'538'} = "Encryption required for requested authentication mechanism.";
$SmtpCode{'550'} = "Requested action not taken: mailbox unavailable.";
$SmtpCode{'551'} = "User not local; please try forwardpath.";
$SmtpCode{'552'} = "Requested mail action aborted: exceeded storage allocation.";
$SmtpCode{'553'} = "Requested action not taken: mailbox name not allowed.";
$SmtpCode{'554'} = "Transaction failed.";

#ErrorCodes
# Success
## X.0.X Other or Undefined Status
$ErrorCode{'2.0.1'} = "Success: Undefined Status";
$ErrorCode{'2.0.2'} = "Success: Undefined Status";
$ErrorCode{'2.0.3'} = "Success: Undefined Status";
$ErrorCode{'2.0.4'} = "Success: Undefined Status";
$ErrorCode{'2.0.5'} = "Success: Undefined Status";
$ErrorCode{'2.0.6'} = "Success: Undefined Status";
$ErrorCode{'2.0.7'} = "Success: Undefined Status";
$ErrorCode{'2.0.8'} = "Success: Undefined Status";
## X.1.X   Addressing Status
$ErrorCode{'2.1.1'} = "Success: Bad destination mailbox address";
$ErrorCode{'2.1.2'} = "Success: Bad destination system address";
$ErrorCode{'2.1.3'} = "Success: Bad destination mailbox address syntax";
$ErrorCode{'2.1.4'} = "Success: Destination mailbox address ambiguous";
$ErrorCode{'2.1.5'} = "Success: Destination mailbox address valid";
$ErrorCode{'2.1.6'} = "Success: Mailbox has moved";
$ErrorCode{'2.1.7'} = "Success: Bad sender's mailbox address syntax";
$ErrorCode{'2.1.8'} = "Success: Bad sender's system address";
## X.2.X   Mailbox Status
$ErrorCode{'2.2.0'} = "Success: Other or undefined mailbox status";
$ErrorCode{'2.2.1'} = "Success: Mailbox disabled, not accepting messages";
$ErrorCode{'2.2.2'} = "Success: Mailbox full";
$ErrorCode{'2.2.3'} = "Success: Message length exceeds administrative limit";
$ErrorCode{'2.2.4'} = "Success: Mailing list expansion problem";
## X.3.X   Mail System Status
$ErrorCode{'2.3.0'} = "Success: Other or undefined mail system status";
$ErrorCode{'2.3.1'} = "Success: Mail system full";
$ErrorCode{'2.3.2'} = "Success: System not accepting network messages";
$ErrorCode{'2.3.3'} = "Success: System not capable of selected features";
$ErrorCode{'2.3.4'} = "Success: Message too big for system";
## X.4.X   Network and Routing Status
$ErrorCode{'2.4.0'} = "Success: Other or undefined network or routing status";
$ErrorCode{'2.4.1'} = "Success: No answer from host";
$ErrorCode{'2.4.2'} = "Success: Bad connection";
$ErrorCode{'2.4.3'} = "Success: Routing server failure";
$ErrorCode{'2.4.4'} = "Success: Unable to route";
$ErrorCode{'2.4.5'} = "Success: Network congestion";
$ErrorCode{'2.4.6'} = "Success: Routing loop detected";
$ErrorCode{'2.4.7'} = "Success: Delivery time expired";
## X.5.X   Mail Delivery Protocol Status
$ErrorCode{'2.5.0'} = "Success: Other or undefined protocol status";
$ErrorCode{'2.5.1'} = "Success: Invalid command";
$ErrorCode{'2.5.2'} = "Success: Syntax error";
$ErrorCode{'2.5.3'} = "Success: Too many recipients";
$ErrorCode{'2.5.4'} = "Success: Invalid command arguments";
$ErrorCode{'2.5.5'} = "Success: Wrong protocol version";
## X.6.X   Message Content or Media Status
$ErrorCode{'2.6.0'} = "Success: Other or undefined media error";
$ErrorCode{'2.6.1'} = "Success: Media not supported";
$ErrorCode{'2.6.2'} = "Success: Conversion required and prohibited";
$ErrorCode{'2.6.3'} = "Success: Conversion required but not supported";
$ErrorCode{'2.6.4'} = "Success: Conversion with loss performed";
$ErrorCode{'2.6.5'} = "Success: Conversion failed";
## X.7.X   Security or Policy Status
$ErrorCode{'2.7.0'} = "Success: Other or undefined security status";
$ErrorCode{'2.7.1'} = "Success: Delivery not authorized, message refused";
$ErrorCode{'2.7.2'} = "Success: Mailing list expansion prohibited";
$ErrorCode{'2.7.3'} = "Success: Security conversion required but not possible";
$ErrorCode{'2.7.4'} = "Success: Security features not supported";
$ErrorCode{'2.7.5'} = "Success: Cryptographic failure";
$ErrorCode{'2.7.6'} = "Success: Cryptographic algorithm not supported";
$ErrorCode{'2.7.7'} = "Success: Message integrity failure";
# Persistent Transient Failure
## X.0.X Other or Undefined Status
$ErrorCode{'4.0.1'} = "Deferral: Undefined Status";
$ErrorCode{'4.0.2'} = "Deferral: Undefined Status";
$ErrorCode{'4.0.3'} = "Deferral: Undefined Status";
$ErrorCode{'4.0.4'} = "Deferral: Undefined Status";
$ErrorCode{'4.0.5'} = "Deferral: Undefined Status";
$ErrorCode{'4.0.6'} = "Deferral: Undefined Status";
$ErrorCode{'4.0.7'} = "Deferral: Undefined Status";
$ErrorCode{'4.0.8'} = "Deferral: Undefined Status";
## X.1.X   Addressing Status
$ErrorCode{'4.1.1'} = "Deferral: Bad destination mailbox address";
$ErrorCode{'4.1.2'} = "Deferral: Bad destination system address";
$ErrorCode{'4.1.3'} = "Deferral: Bad destination mailbox address syntax";
$ErrorCode{'4.1.4'} = "Deferral: Destination mailbox address ambiguous";
$ErrorCode{'4.1.5'} = "Deferral: Destination mailbox address valid";
$ErrorCode{'4.1.6'} = "Deferral: Mailbox has moved";
$ErrorCode{'4.1.7'} = "Deferral: Bad sender's mailbox address syntax";
$ErrorCode{'4.1.8'} = "Deferral: Bad sender's system address";
## X.2.X   Mailbox Status
$ErrorCode{'4.2.0'} = "Deferral: Other or undefined mailbox status";
$ErrorCode{'4.2.1'} = "Deferral: Mailbox disabled, not accepting messages";
$ErrorCode{'4.2.2'} = "Deferral: Mailbox full";
$ErrorCode{'4.2.3'} = "Deferral: Message length exceeds administrative limit";
$ErrorCode{'4.2.4'} = "Deferral: Mailing list expansion problem";
## X.3.X   Mail System Status
$ErrorCode{'4.3.0'} = "Deferral: Other or undefined mail system status";
$ErrorCode{'4.3.1'} = "Deferral: Mail system full";
$ErrorCode{'4.3.2'} = "Deferral: System not accepting network messages";
$ErrorCode{'4.3.3'} = "Deferral: System not capable of selected features";
$ErrorCode{'4.3.4'} = "Deferral: Message too big for system";
## X.4.X   Network and Routing Status
$ErrorCode{'4.4.0'} = "Deferral: Other or undefined network or routing status";
$ErrorCode{'4.4.1'} = "Deferral: No answer from host";
$ErrorCode{'4.4.2'} = "Deferral: Bad connection";
$ErrorCode{'4.4.3'} = "Deferral: Routing server failure";
$ErrorCode{'4.4.4'} = "Deferral: Unable to route";
$ErrorCode{'4.4.5'} = "Deferral: Network congestion";
$ErrorCode{'4.4.6'} = "Deferral: Routing loop detected";
$ErrorCode{'4.4.7'} = "Deferral: Delivery time expired";
## X.5.X   Mail Delivery Protocol Status
$ErrorCode{'4.5.0'} = "Deferral: Other or undefined protocol status";
$ErrorCode{'4.5.1'} = "Deferral: Invalid command";
$ErrorCode{'4.5.2'} = "Deferral: Syntax error";
$ErrorCode{'4.5.3'} = "Deferral: Too many recipients";
$ErrorCode{'4.5.4'} = "Deferral: Invalid command arguments";
$ErrorCode{'4.5.5'} = "Deferral: Wrong protocol version";
## X.6.X   Message Content or Media Status
$ErrorCode{'4.6.0'} = "Deferral: Other or undefined media error";
$ErrorCode{'4.6.1'} = "Deferral: Media not supported";
$ErrorCode{'4.6.2'} = "Deferral: Conversion required and prohibited";
$ErrorCode{'4.6.3'} = "Deferral: Conversion required but not supported";
$ErrorCode{'4.6.4'} = "Deferral: Conversion with loss performed";
$ErrorCode{'4.6.5'} = "Deferral: Conversion failed";
## X.7.X   Security or Policy Status
$ErrorCode{'4.7.0'} = "Deferral: Other or undefined security status";
$ErrorCode{'4.7.1'} = "Deferral: Delivery not authorized, message refused";
$ErrorCode{'4.7.2'} = "Deferral: Mailing list expansion prohibited";
$ErrorCode{'4.7.3'} = "Deferral: Security conversion required but not possible";
$ErrorCode{'4.7.4'} = "Deferral: Security features not supported";
$ErrorCode{'4.7.5'} = "Deferral: Cryptographic failure";
$ErrorCode{'4.7.6'} = "Deferral: Cryptographic algorithm not supported";
$ErrorCode{'4.7.7'} = "Deferral: Message integrity failure";
# Permanent Failure
## X.0.X Other or Undefined Status
$ErrorCode{'5.0.1'} = "Failure: Undefined Status";
$ErrorCode{'5.0.2'} = "Failure: Undefined Status";
$ErrorCode{'5.0.3'} = "Failure: Undefined Status";
$ErrorCode{'5.0.4'} = "Failure: Undefined Status";
$ErrorCode{'5.0.5'} = "Failure: Undefined Status";
$ErrorCode{'5.0.6'} = "Failure: Undefined Status";
$ErrorCode{'5.0.7'} = "Failure: Undefined Status";
$ErrorCode{'5.0.8'} = "Failure: Undefined Status";
## X.1.X   Addressing Status
$ErrorCode{'5.1.1'} = "Failure: Bad destination mailbox address";
$ErrorCode{'5.1.2'} = "Failure: Bad destination system address";
$ErrorCode{'5.1.3'} = "Failure: Bad destination mailbox address syntax";
$ErrorCode{'5.1.4'} = "Failure: Destination mailbox address ambiguous";
$ErrorCode{'5.1.5'} = "Failure: Destination mailbox address valid";
$ErrorCode{'5.1.6'} = "Failure: Mailbox has moved";
$ErrorCode{'5.1.7'} = "Failure: Bad sender's mailbox address syntax";
$ErrorCode{'5.1.8'} = "Failure: Bad sender's system address";
## X.2.X   Mailbox Status
$ErrorCode{'5.2.0'} = "Failure: Other or undefined mailbox status";
$ErrorCode{'5.2.1'} = "Failure: Mailbox disabled, not accepting messages";
$ErrorCode{'5.2.2'} = "Failure: Mailbox full";
$ErrorCode{'5.2.3'} = "Failure: Message length exceeds administrative limit";
$ErrorCode{'5.2.4'} = "Failure: Mailing list expansion problem";
## X.3.X   Mail System Status
$ErrorCode{'5.3.0'} = "Failure: Other or undefined mail system status";
$ErrorCode{'5.3.1'} = "Failure: Mail system full";
$ErrorCode{'5.3.2'} = "Failure: System not accepting network messages";
$ErrorCode{'5.3.3'} = "Failure: System not capable of selected features";
$ErrorCode{'5.3.4'} = "Failure: Message too big for system";
## X.4.X   Network and Routing Status
$ErrorCode{'5.4.0'} = "Failure: Other or undefined network or routing status";
$ErrorCode{'5.4.1'} = "Failure: No answer from host";
$ErrorCode{'5.4.2'} = "Failure: Bad connection";
$ErrorCode{'5.4.3'} = "Failure: Routing server failure";
$ErrorCode{'5.4.4'} = "Failure: Unable to route";
$ErrorCode{'5.4.5'} = "Failure: Network congestion";
$ErrorCode{'5.4.6'} = "Failure: Routing loop detected";
$ErrorCode{'5.4.7'} = "Failure: Delivery time expired";
## X.5.X   Mail Delivery Protocol Status
$ErrorCode{'5.5.0'} = "Failure: Other or undefined protocol status";
$ErrorCode{'5.5.1'} = "Failure: Invalid command";
$ErrorCode{'5.5.2'} = "Failure: Syntax error";
$ErrorCode{'5.5.3'} = "Failure: Too many recipients";
$ErrorCode{'5.5.4'} = "Failure: Invalid command arguments";
$ErrorCode{'5.5.5'} = "Failure: Wrong protocol version";
## X.6.X   Message Content or Media Status
$ErrorCode{'5.6.0'} = "Failure: Other or undefined media error";
$ErrorCode{'5.6.1'} = "Failure: Media not supported";
$ErrorCode{'5.6.2'} = "Failure: Conversion required and prohibited";
$ErrorCode{'5.6.3'} = "Failure: Conversion required but not supported";
$ErrorCode{'5.6.4'} = "Failure: Conversion with loss performed";
$ErrorCode{'5.6.5'} = "Failure: Conversion failed";
## X.7.X   Security or Policy Status
$ErrorCode{'5.7.0'} = "Failure: Other or undefined security status";
$ErrorCode{'5.7.1'} = "Failure: Delivery not authorized, message refused";
$ErrorCode{'5.7.2'} = "Failure: Mailing list expansion prohibited";
$ErrorCode{'5.7.3'} = "Failure: Security conversion required but not possible";
$ErrorCode{'5.7.4'} = "Failure: Security features not supported";
$ErrorCode{'5.7.5'} = "Failure: Cryptographic failure";
$ErrorCode{'5.7.6'} = "Failure: Cryptographic algorithm not supported";
$ErrorCode{'5.7.7'} = "Failure: Message integrity failure";

while (defined(my $ThisLine = <STDIN>))
{
	if (
			( $ThisLine =~ /new msg/ ) or
			( $ThisLine =~ /status: / ) or
			( $ThisLine =~ /bounce msg/ ) or
			( $ThisLine =~ /end msg/ )
		)
	{
		# We don't care about these
	}
	# @4000000042203bb712373f04.s:@4000000042202ab23b98282c delivery 28: deferral: Sorry,_I_wasn't_able_to_establish_an_SMTP_connection._(#4.4.1)/

	elsif ( ($msgid,$DeliveryResponse,$Response) = ( $ThisLine =~ /delivery (\d+)\: (.*?)\:(.*)/ ) )
	{
		if ( $Response =~ /did_/ )
		{
			# ignore these.
		}
		else
		{
			if ( ($ResponseCode) = ( $Response =~ /Remote_host_said\:_(\d{3})_/ ) )
			{
				$ServerResponses->{$DeliveryResponse}->{$ResponseCode}++;
			}
			else
			{
				#if ( $DeliveryResponse =~ /failure/ )
				if ( ( $ResponseCode) = ( $ThisLine =~ /failure:.*_vpopmail_\(#(\d\.\d\.\d)\)\// ) )
				{
					#$ResponseCode=511;
					$ResponseCode =~ s/\.//g;
					$ServerResponses->{$DeliveryResponse}->{$ResponseCode}++;
				}

				#if ( $DeliveryResponse =~ /deferral/ )
				if ( ( $ResponseCode) = ( $ThisLine =~ /deferral:.*_\(#(\d\.\d\.\d)\)\// ) )
				{
					#$ResponseCode=443;
					$ServerResponses->{$DeliveryResponse}->{$ResponseCode}++;
				}
			}
		}
	}
	elsif ( ($EmailFrom) = ( $ThisLine =~ /from \<(.*)\>/ ) )
	{
		$From{$EmailFrom}++;
	}
	elsif ( ($ToLocal) = ( $ThisLine =~ /to local (.*)/ ) )
	{
		$Local{$ToLocal}++;
	}
	elsif ( ($ToRemote) = ( $ThisLine =~ /to remote (.*)/ ) )
	{
		$Remote{$ToRemote}++;
	}
	elsif( ($warning) = ($ThisLine =~ /warning: (.*)/ )  )
	{
		$Warning{$warning}++;
	}
	elsif ( ($triplebounce) = ($ThisLine =~ /triple bounce: discarding bounce\/(\d+)$/ ) )
	{
		$TripleBounce{$triplebounce}++;
	}
	else
	{
		# Report any unmatched entries...
		push @OtherList,$ThisLine;
	}
}

if ($QmailDetail >= 1)
{
	if ($QmailThreshold > 0)
	{
		if (($RemoteThreshold < 0) or ($RemoteThreshold eq ''))
		{
			$RemoteThreshold = $QmailThreshold;
		}
		if (($FromThreshold < 0) or ($FromThreshold eq ''))
		{
			$FromThreshold = $QmailThreshold;
		}
		if (($LocalThreshold < 0) or ($LocalThreshold eq ''))
		{
			$LocalThreshold = $QmailThreshold;
		}
	}

	if (($RemoteThreshold < 0) or ($RemoteThreshold eq ''))
	{
		$RemoteThreshold = 0;
	}
	if (($FromThreshold < 0) or ($FromThreshold eq ''))
	{
		$FromThreshold = 0;
	}
	if (($LocalThreshold < 0) or ($LocalThreshold eq ''))
	{
		$LocalThreshold = 0;
	}

	if ( (keys %From) )
	{
		print "\nEmails from (Threshold of " . $FromThreshold . "):\n";
		$threshold_reached=0;
		foreach my $Line (sort {$From{$b} <=> $From{$a}} keys %From)
		{
			if ($From{$Line} >= $FromThreshold)
			{
				$threshold_reached = 1;
				print "\t" . $Line . " - ". $From{$Line} . " Time(s)\n";
			}
		}
		if ($threshold_reached < 1)
		{
			print "\t" . "None found above the threshold ($FromThreshold)\n";
		}
	}

	if ( (keys %Remote) )
	{
		print "\nEmails to Remote Server (Threshold of " . $RemoteThreshold . "):\n";
		$threshold_reached=0;
		foreach my $Line (sort {$Remote{$b} <=> $Remote{$a}} keys %Remote)
		{
			if ($Remote{$Line} >= $RemoteThreshold)
			{
				$threshold_reached=1;
				print "\t" . $Line . " - ". $Remote{$Line} . " Time(s)\n";
			}
		}
		if ($threshold_reached < 1)
		{
			print "\t" . "None found above the threshold ($RemoteThreshold)\n";
		}
	}

	if ( (keys %Local) )
	{
		print "\nEmails to Local Server (Threshold of " . $LocalThreshold . "):\n";
		$threshold_reached=0;
		foreach my $Line (sort {$Local{$b} <=> $Local{$a}} keys %Local)
		{
			if ($Local{$Line} >= $LocalThreshold)
			{
				$threshold_reached=1;
				print "\t" . $Line . " - ". $Local{$Line} . " Time(s)\n";
			}
		}
		if ($threshold_reached < 1)
		{
			print "\t" . "None found above the threshold ($LocalThreshold)\n";
		}
	}
}

if (keys %{$ServerResponses})
{
	print "\nRemote Server Responses:\n";
	foreach my $Line (sort {$a cmp $b} keys %{$ServerResponses})
	{
		foreach $Detail (sort {$a cmp $b} keys %{$ServerResponses->{$Line}})
		{
			$ServerResponseTotal{$Line} += $ServerResponses->{$Line}->{$Detail};
			$ServerResponseOverallTotal += $ServerResponses->{$Line}->{$Detail};
			print "\t".ucfirst($Line)."(" . $Detail . ") - ". $ServerResponses->{$Line}->{$Detail} . " Time(s)";
			if ( $SmtpCode{$Detail} )
			{
				print " - ".$SmtpCode{$Detail};
			}
			elsif ( $ErrorCode{$Detail} )
			{
				print " - ". $ErrorCode{$Detail};
			}
			print "\n";
		}
	}
	print "\n\tPercentage(s):\n";
	foreach my $Details (sort {$a cmp $b} keys %ServerResponseTotal)
	{
		$percentage = (($ServerResponseTotal{$Details} / $ServerResponseOverallTotal) * 100);
		print "\t\t" . ucfirst($Details) . " - ";
		printf("%.2f",$percentage);
		print " %\n";
	}
}

if ( (keys %Warning) )
{
   print "\nWarnings:\n";
   foreach my $Line (sort {$Warning{$b} <=> $Warning{$a}} keys %Warning)
   {
      print "\t" . $Line . " - ". $Warning{$Line} . " Time(s)\n";
   }
}

if ( (keys %TripleBounce) )
{
	$ct = 0;
	foreach(keys %TripleBounce)
	{
		$ct++;
	}
	print "\nTripleBounces:\t";
	print "$ct times\n";
}

if (($#OtherList >= 0) and (not $IgnoreUnmatched))
{
	print "\n**Unmatched Entries**\n";
	print @OtherList;
}

exit(0);

# vi: shiftwidth=3 tabstop=3 syntax=perl et
# Local Variables:
# mode: perl
# perl-indent-level: 3
# indent-tabs-mode: nil
# End: