1.97 2014-01-09 Martin Maurer
Add some new chip ids for LPC11xx
Updated .gitignore file (Now with ignored *.layout)
Removed *.layout from lpc21isp project
Removed *.depend from lpc21isp project
1.96 2014-01-08 Martin Maurer merged changes by Moses McKnight
Added devices: LPC1315, LPC1316, LPC1317, LPC1345, LPC1346, LPC1347
Add .gitignore file (MM: Removed *.layout)
2014-01-08 Martin Maurer merged bugfix by smartavionics:
- Wrong length in ReceiveComPort
- Enable SerialTimeoutTick
2014-01-08 Martin Maurer merged bugfix by justyn:
- Fix the total sector size fields for 1114.../323 and 1114.../333
2014-01-08 Martin Maurer merged bugfix by imyller:
- Support for bad UARTs: added -writedelay command-line switch
1.95 2014-01-08 Martin Maurer
Add a lot of new chip ids for LPC1763, LPC11Exx, LPC11Uxx
(completely untested because I don't have these chips)
Corrected checking of 2 field chip ids (must be masked)
Corrected Makefile (-static)
Move while directory with files into a subdirectory
1.94 2013-08-10 Martin Maurer
Add (assumed) part id values for LPC4333 and LPC4337
Correct table entries for all LPC43xx part id numbers
(missing flag for two word part ids and second word for LPC4333 and LPC4353)
Merge in optimization (thanks to Stefan) to skip empty sectors
Correct help output of "-boothold"
Add workaround table entry for LPC4357 and word1 equal to 0x0EF60000
Bugfix for wrong check of word0/word1 combination
Correct a lot entries in lpc property table of LPC18xx and LPC43xx
LPC18xx and LPC43xx: Add warning message, that wipe erases only bank A
1.93 2013-07-05 Andrew Pines
changed Makefile to exclude "-static" from CFLAGS when building for OS X
changed serial timeout for *nix to use select
added -boothold argument to assert ISP throughtout programming sequence
added support for -try<n> command line argument (was in help, didn't actually work)
1.92 2013-06-29 Martin Maurer
Thanks to Phil for reporting Linux compile errors
1.91 2013-06-28 Torsten Lang, Uwe Schneider GmbH
Minor bugfix for the residual data handling
1.90 2013-06-27 Martin Maurer
Add checksum calculation for LPC8XX
winmm function only available in MSVC, put ifdefs around
Workaround for lost characters of LPC8XX
1.89 2013-06-27 Martin Maurer
Thanks to Manuel and Henri for bugfixes and speed-ups
Bugfix: In case of LPC8XX, XON/XOFF handling must be switched off,
otherwise download gets broken, because XON/XOFF are filtered out...
1.88 2013-04-25 Torsten Lang, Uwe Schneider GmbH
Fixed answer evaluation
Added sector tables for LPC1833
XON/XOFF handling according to LPC manual
Changed COMMTIMEOUTS settings according to MS help
Changed waiting code from tick counting to system time usage
Set MM timers to 1ms resolution (otherwise waiting in the serial driver is limited to multiples of 10ms)
Send all commands with <CR><LF> according to NXP UM
Change answer evaluation to match at least LPC17xx and LPC18xx families (LPC17xx just mirrors the first character of
the LF sequence, LPC18xx mirrors the first character and adds an <LF> which then will lead to a <CR><LF><LF>
sequence, all other lines are terminated with <CR><LF> as documented)
Change answer formatting by filtering leading <LF> characters because they can be left over from a previous response
Store residual data of an answer (required for the J command which will deliver two words in case of the LPC18xx)
Expanded configuration table by second identification word and usage flag
Do a two stage scan in case that a device with two identification words is detected
1.87 2012-12-18 Philip Munts
Added a section of code to ResetTarget() in lpc21isp.c to allow using Linux GPIO pin
to control reset and ISP.
1.86 2012-12-14 diskrepairman
Added devices: LPC1114/203 LPC1114/303 LPC1114/323 LPC1114/333 LPC1115/303
1.85 2012-12-13 Philip Munts
Fixed conditional compilation logic in lpc21isp.h to allow compiling for ARM Linux.
1.84 2012-09-27 Philip Munts
Added chip id's for more LPC11xx parts, per UM10398 Rev. 11 26 July 2012
1.83 2011-08-02 Martin Maurer
Thanks to Conurus for detecting and fixing a bug with patching checksum
(patching was too early, chip id was not yet available)
(Re-)Added code to start downloaded via "G 0 T", when using LPC1xxx
(Starting code at position 0 seems to work, compare to comment of version 1.70)
Changed some occurances of Philips to NXP
Added -static to Makefile (thanks to Camilo)
Added support for LPC1311/01 and LPC1313/01 (they have separate identifiers)
Correct flash size of LPC1342 to 16 KByte (thanks to Decio)
Abort programming when unknown NXP chip id is detected
1.82 2011-06-25 Moses McKnight
Corrected MaxCopySize for a number of the LPC11xx series
Added support for several more LPC11xx and LPC11Cxx series
1.81 2011-03-30 Mario Ivancic
As per message #517 from Thiadmer Riemersma, removed WaitForWatchDog and WatchDogSeconds
1.80 2010-03-04 Philip Munts
Added entries to LPCtypes in lpcprog.c for obsolete revisions of LPC2364/6/8/78.
Added entry to LPCtypes in lpcprog.c for new LPC2387.
1.79 2010-02-19 Andrew Pines
Added __APPLE__ flag to CFLAGS in Makefile to detect and handle OS X
Added -Wall to Makefile to report warnings more comprehensively
Added #define in lpc21isp.h to substitute strnicmp with strncasecmp (needed for Unix)
Fixed a few format specifiers in lpcprog.c to eliminate some warnings
1.78 2010-02-16 Martin Maurer
Corrected chip id of LPC1751
Added support for LPC1759, LPC1767 and LPC1769
1.77 2010-02-01 Martin Maurer
Corrected chip id of LPC1342 and LPC1343
Added a new chip type for LPC11xx and LPC13xx microcontrollers
Use higher area of RAM with LPC11xx and LPC13xx, because lower RAM is occupied by ISP
Add code to lpcprog.c to read unique id, but not yet activate.
Adapt block sizes for copying for each model of LPC11xx and LPC13xx
1.76 2010-02-01 Published test version without source code
1.75 2010-01-05 Martin Maurer
Added support for LPC11xx devices (not tested at all)
Changed Product in LPC_DEVICE_TYPE from number to string to distinguish new LPC11 devices
Changed "unsigned" to "unsigned int" in LPC_DEVICE_TYPE
1.74 2009-09-14 Mario Ivancic
Added support for multiple HEX files, besed on internal version 1.37B.
NOTE: this feature is used in production in 1.37B but is not tested in this version.
Added numeric debug level command line switch -debugn, n=[0-5]
Added command line scitch -try n to specify nQuestionMarks limit. Default: 100
Merged in DoNotStart patch from cgommel_new
Static functions declarations moved from lpc21isp.h to this file
Modified LoadFile() to return error_code instead exit(1)
Removed IspEnvironment.debug_level, all code uses global debug_level
1.73 2009-09-14 Martin Maurer
Correct again (hopefully the last time) the CPUIDs for some LPC17xx devices
(Now according to User Manual LPC17xx Version 00.07 (31 July 2009))
1.72 2009-09-14 Martin Maurer
Add support for LPC13xx devices
1.71 2009-07-19 Martin Maurer
Added LPC17xx with CPUID starting with 0x26 (not according user manual)
1.70 2009-06-29 Martin Maurer
Further improvement of LPC17xx support
Workaround for booter (4.1) of LPC17xx, which does not echo all sent characters (0D,0A,...)
ISP command GO seems to be broken:
Sending 'G 196 T(0A)'
Answer(Length=15): 'G 196 T(0A)0(0D)(0A)'
leads to 'prefetch_abort_exception(0D)(0A)1FFF07A5'
No solution known...need your help here...
Manual workaround: Use DTR and RTS toggling to start application (e.g. 2 batch files)
1.69 2009-06-18 Martin Maurer
Add support for LPC17xx devices
1.68 2009-05-17 Martin Maurer
Merge in changes done by Bruno Quoitin (baudrate problem when __APPLE__ is used)
Remove TABs from source code and replaced them with spaces
1.67 2009-04-19 SASANO Takayoshi
Add OpenBSD support
1.66 2009-03-26 Vito Marolda
Corrected interpretation of intel hex record 03 which is execution start address
and not data segment address
1.65 2009-03-26 Vito Marolda
Added pre-erasure of sector 0 to invalidate checksum before starting
modification of the other sectors, so that the bootloader restarts
if programming gets aborted while writing on a non-empty part.
1.64 2009-01-19 Steve Franks
__FREEBSD__ changed to __FreeBSD__ at some point, plus other com port fixes
1.63 2008-11-23 Martin Maurer
Changed to GNU Lesser General Public License
1.62 2008-11-19 Martin Maurer
Added (untested) support for LPC2109
Added (untested) support for LPC2361 / LPC2362
Heavy update of part identification number of LPC23xx and LPC24xx
Correct bug, that hex file must exist, when "-detectonly" is used
Correct Makefile.vc: use /Fe instead of -o
1.61 2008-10-21 Fausto Marzoli (thanks to Geoffrey Wossum for the patches)
Fix for compiling latest version under Linux and "ControlLinesSwapped" issue
1.60 2008-07-21 Martin Maurer
Added uptodate part ids for LPC2458, LPC2468 and LPC2478
Add comment "obsolete" for older part ids for LPC2458 and LPC2468
Add ", " between compile date and time
1.59 2008-07-07 Peter Hayward
Fixed freeze under Windows XP SP2 by removing redundant call to SetCommMask.
1.58 2008-05-10 Herbert Demmel email@example.com
I had the special requirement to integrate the program into my own Windows
software compiled with Borland C++ Builder 5. I had to do some minor changes
for Borland (see defined __BORLANDC__) and modified to code slightly to have
some simple callbacks for screen i/o (see define INTEGRATED_IN_WIN_APP).
Please note that I do *not* check / modify the part for AnalogDevices !!
Besides that I fixed some minor issues:
added dcb.fOutxCtsFlow = FALSE and dcb.fOutxDsrFlow = FALSE (sometimes required)
Now comparing one character less of answer to "Now launching ... code" command
1.57 2008-04-06 Mauricio Scaff
Changed OpenSerialPort to work with MacOS
Corrected the number of sectors in some 512K devices (28 instead of 27)
Added support for LPC2387 and LPC2388
Defined BL error 19 (Code Protected)
1.56 2008-04-01 Steve Franks
Integrate FreeBSD patch.
Add support for swapping and/or inverting RTS & DTR
1.55 2008-03-03 Martin Maurer
Thanks to Fausto Marzoli, bugfix for compiling latest version under Linux
1.54 2008-03-03 Martin Maurer
Try to bring lpc21isp back to a useable state in Windows, Cygwin, Linux and Mac OS.
Merged in changes by Erika Stefanini, which were done only for old version 1.49:
Added device ids for revision B chips
1.53 2008-02-25 Changes by Michael Roth
Get priority of debug messages with -control right
1.52 2008-01-22 Changes by Manuel Koeppen
Made compileable again for linux and windows
Fixed bug in ClearSerialPortBuffers (linux)
1.51 2007-11-20 Changes by Simon Ellwood
Split into seperate files
Made more modular so when used in an embedded mode only the required code is built
1.50 2007-10-31 Changes by Simon Ellwood
Formated the code for readablity
Fixed some c++ compiler issues
1.49 2007-10-16 New Option -halfduplex allow single wire using.
Implemented and tested only for Windows. Data Resend implemented.
1.48 2007-04-20 Martin Maurer
Thanks to Josef Wolf for preventing to overwrite over end of array
1.47 2007-02-27 Robert Adsett
Raised timeout on AD send packet function.
1.46 2007-02-25 Martin Maurer
Again corrected debug output: should solve output of
(FFFFFFB5) instead of (B5)
1.45 2007-02-25 Martin Maurer
Replace printf syntax of DumpString by a simple pointer to a string
printf syntax is a nice thing, but it is not working :-(
and therefore makes debugging much more difficult...
Moved VERSION_STR to top of file to avoid possible cosmetical errors
1.44 2007-02-23 Yang Yang
Added feature for LPC21: Verify the data in Flash after every writes
to sector. To detect errors in writing to Flash ROM.
1.43 2007-01-29 Martin Maurer
Moved keyboard handling routines to own subroutines,
so they can be used during aborting synchronisation.
Newest cygwin made problems, StringOscillator always contained '\0x0d'
at the end, when calling lpc21isp from batch file
1.42 2007-01-28 Rob Probin
Added -localecho command to allow local echoing in terminal mode for use
where target does not echo back keystrokes.
1.41 2007-01-28 Jean-Marc Koller
Modified Terminal() to disable ECHO with termios only once, instead of
modifying and restoring termios in each getch and kbhit call (which caused
a strange echo behaviour in MacOS X).
1.40 2007-01-22 Martin Maurer
Correction of chip id of LPC2458
1.39 2007-01-12 Martin Maurer
Added initial support for new processors LPC23xx and LPC24xx
1.38 2007-01-05 Ray Molenkamp
Added feature for LPC21: Wipe entire device before programming to enable
reflashing of chips with the lpc codeprotection feature enabled.
1.37 2006-10-03 Jeroen Domburg
Added LPC2103 (and only the 2103, I can't find the IDs for 2101/2102)
Corrected a loop which occured if the program completely fits in sector 0
1.36 2006-25-01 Cyril Holweck
PhilipsDownload() will now return a unique error code for each error
1.35 2006-22-01 Cyril Holweck
Added feature for LPC21: will start downloading at Sector 1 and upward,
to finish with Sector 0, the one containing the checksum controling BSL entry
1.34 2006-10-01 Cyril Holweck:
Made it compile again for lpc21isp
Added const keyword to constant variables to make it better
code for embeded target. (decrease RAM usage)
Replaced all regular call to printf() by DebugPrintf()
Removed call to scanf() (not much usefull and cost a lot to my target)
1.33 2006-10-01 Jean-Marc Koller:
Added support for MacOS X (difference on how to set termios baudrate).
1.32 2005-12-02 Martin Maurer: Corrected missing control of RTS/DTR
in case user selected -termonly and -control
Small correction (typo in debug)
1.31 2005-11-13 Martin Maurer: Thanks to Frank Gutmann
Updated number of sectors in device table
for LPC2194, LPC2292 and LPC2294
1.30 2005-10-04 Rob Jansen:
- forgot to change the version string in 1.29
- Wrong text in LoadFile corrected (printed text mentions record type 05,
this should be 04
- Changed LoadFile to accept multiple record types 04
- Changed LoadFile to check on memory size, will not load more than x MB
if linear extended address records are used
1.29 2005-09-14 Rob Jansen:
Added functionality to download to RAM and run from there.
In LoadFile() added record types 04 (Extended Linear Address Record)
and 05 (Start Linear Address Record), added address offset
(IspEnvironment->BinaryOffset) and start address (...->StartAddress).
Changed PhilipsDownload to skip all Flash prepare/erase/copy commands.
Note: Tested with VC7 only
1.28 2005-07-27 Anders Rosvall / Embedded Artists AB:
Changed the reset timeout to 500 ms when entering the bootloader.
Some external reset controllers have quite long timeout periods,
so extening the timeout delay would be a good thing.
1.27 2005-06-29 Martin Maurer:
Add LPC chip ID's (thanks to Robert from Philips) for
missing LPC213x and upcoming new LPC214x chips
(currently untested, because i don't have access to these chips,
please give me feedback !)
1.26 2005-06-26 Martin Maurer:
Correct check again: "G 0 A\r\n0\r\n" is cutted, because of reboot
(error on running program, but reports CMD_SUCCESS)
1.25 2005-06-19 Martin Maurer: Setup more parameters in DCB,
otherwise wrong code is downloaded (only Windows and Cygwin)
when a previous program has changed these parameters
Check exact string of "G 0 A\r\n0\r\n" instead of whole received buffer,
to prevent checking of already received by program start
(error on running program, but reports CMD_SUCCESS)
Add ifdefs for all baudrates (needed only for high baudrate,
which seem to be not available on Macs...)
1.24C 2005-06-11 Changes by Thiadmer Riemersma: added the device ID codes for
chip types LPC2131 and LPC2132.
1.24B 2005-06-02 Changes by Thiadmer Riemersma: completed support for other
chip types (LPC213x series and others).
1.23 2005-01-16 Build in automatic detection of LPC chiptype
(needed for 256 KByte support)
1.22 2004-11-08 Changes from Cyril Holweck / Evgeny Sinelnikov
Forgotten IspEnvironment-> and bugfixes if COMPILE_FOR_LINUX
If COMPILE_FOR_LPC21, PhilipsDownload() 'acts as' main():
- it should not be static and should return int.
- no sub-function can use exit() but only return ()
Use 'char' instead of 'byte' ;)
1.21 2004-11-08 Bugfix from Robert Adsett
BinaryLength was not initialized
1.20 2004-11-07 Preparation for multiport booting (factory support)
1.19 2004-11-03 Changes by Robert Adsett
Add support for Analog Devices.
Separate file load from programming.
Change from a debug on/off flag to debug level
Remove if (debug) tests and replace with DebugPrintf
Change serial I/O and timing so that the system
dependancies are isolated to a few portability functions.
Add support for binary serial I/O.
Add doxygen support.
1.18 2004-10-26 Changes by Cyril Holweck
Added a "G 0 A\r\n" at end of programming to run code.
1.17 2004-10-21 Changes by Cyril Holweck
Divide main, take out the real programming function, that can
also be used by a target to copy its own code to another.
1.16 2004-10-09 Merged in bugfix / improvement by Sinelnikov Evgeny
I found out that Linux and Windows serial port initialization
are different with pinouts states. My board don't get
reset signal at first cycle of DTR pinout moving.
And I add this moving to initalization cycle.
1.15 2004-09-27 Temporary improvement by Cyril Holweck:
Removed test (data echoed = data transmited) on the main
data transfert, since this was the biggest failure
reason and is covered by checksome anyway.
Added COMPILE_FOR_LPC21, to have target dump it's own
memory to stdout.
1.14 2004-07-07 Merged in improvement by Alex Holden:
Remove little/big endian dependancy
1.13 2004-05-19 Merged in improvement by Charles Manning:
Instead of exiting the wrong hex file size is corrected
1.12 2004-04-04 Add switch to enable logging terminal output to lpc21isp.log
1.11 2004-04-03 Small optimization for controlling reset line
otherwise termonly starts LPC twice, free PC buffers
1.10 2004-04-03 Clear buffers before sending commands to LPC21xx,
this prevents synchronizing errors when previously loaded
program does a lot of output, so FIFO of PC runs full
1.09 2004-04-03 Redesign of upload routine
Now always 180 byte blocks are uploaded, to prevent
small junks in uuencoding
1.08 2004-04-01 Bugfix for upload problem
1.07 2004-03-14 Implement handling of control lines for easier booting
1.06 2004-03-09 Merged in bugfixes by Charles Manning:
The '?' sychronisation does not reliably respond to the first '?'.
I added some retries.
The LPC2106 sometimes responds to the '?' by echoing them back.
This sometimes causes an attempt to match "?Synchonized".
Added code to strip off any leading '?'s.
Timeouts were too long.
Change from RTS/CTS to no flow control.
Done because many/most people will use only 3-wire comms.
Added some progress tracing.
1.05 2004-03-14 Implement printing of error codes as text / strings
1.04 2004-02-12 Merged in bugfixes by Soeren Gust
1.03 2004-01-25 Preparation to upload to public website
1.02 2004-01-10 Implemented conversion intel hex format -> binary
1.01 2004-01-10 Porting to Linux (at least compiling must work)
1.00 2004-01-08 Initial Version, tested for MSVC6/7 and GCC under Cygwin