#!/bin/bash
#
# SPDX-FileCopyrightText: 2019 Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
#
# SPDX-License-Identifier: LGPL-2.1-only

TEST_DESC="Clear - Kernel tracing"

CURDIR=$(dirname $0)/
TESTDIR=$CURDIR/../../..
EVENT_NAME="lttng_test_filter_event"

PAGE_SIZE=$(getconf PAGE_SIZE)
TRACE_PATH=$(mktemp -d -t tmp.test_clear_kernel_trace_path.XXXXXX)

NUM_TESTS=839

# shellcheck source=../utils/utils.sh
source "$TESTDIR/utils/utils.sh"

function signal_cleanup ()
{
	stop_lttng_sessiond
	modprobe --remove lttng-test
	full_cleanup
}

function clean_path ()
{
	local trace_path=$1
	set -u
	rm -rf $trace_path
	set +u
}

function cond_start_tracing ()
{
	local session_name=$1
	local tracing_active=$2

	if [[ $tracing_active -ne 1 ]]; then
		start_lttng_tracing_ok $session_name
	fi
}

function cond_stop_tracing ()
{
	local session_name=$1
	local tracing_active=$2

	if [[ $tracing_active -ne 1 ]]; then
		stop_lttng_tracing_ok $session_name
	fi
}

function do_clear_session ()
{
	local session_name=$1
	local tracing_active=$2
	local clear_twice=$3
	local rotate_before=$4
	local rotate_after=$5

	cond_stop_tracing $session_name $tracing_active
	if [[ $rotate_before -eq 1 ]]; then
		rotate_session_ok $SESSION_NAME
	fi
	lttng_clear_session_ok $SESSION_NAME
	if [[ $clear_twice -eq 1 ]]; then
		lttng_clear_session_ok $SESSION_NAME
	fi
	if [[ $rotate_after -eq 1 ]]; then
		if [[ $tracing_active -eq 1 ]]; then
			rotate_session_ok $SESSION_NAME
		else
			# Expect failure
			rotate_session_fail $SESSION_NAME
		fi
	fi
	cond_start_tracing $session_name $tracing_active
}

function test_kernel_streaming ()
{
	local tracing_active=$1
	local clear_twice=$2
	local rotate_before=$3
	local rotate_after=$4
	local local_path="${TRACE_PATH}/${HOSTNAME}/${SESSION_NAME}*"

	diag "Test kernel streaming clear"
	diag "Parameters: tracing_active=$tracing_active, clear_twice=$clear_twice, rotate_before=$rotate_before, rotate_after=$rotate_after"
	create_lttng_session_uri $SESSION_NAME net://localhost
	lttng_enable_kernel_event $SESSION_NAME $EVENT_NAME
	start_lttng_tracing_ok $SESSION_NAME
	# Generate 10 events that will sit in the buffers.
	echo -n "10" > /proc/lttng-test-filter-event

	do_clear_session $SESSION_NAME $tracing_active $clear_twice $rotate_before $rotate_after

	stop_lttng_tracing_ok $SESSION_NAME

	if [[ $rotate_before -eq 1 ]]; then
		validate_trace_count $EVENT_NAME $local_path 10
	else
		validate_trace_empty $local_path
	fi

	destroy_lttng_session_ok $SESSION_NAME
}

function test_kernel_streaming_rotate_clear ()
{
	local tracing_active=$1
	local clear_twice=$2
	local rotate_before=$3
	local rotate_after=$4
	local local_path="${TRACE_PATH}/${HOSTNAME}/${SESSION_NAME}*"

	diag "Test kernel streaming rotate-clear"
	diag "Parameters: tracing_active=$tracing_active, clear_twice=$clear_twice, rotate_before=$rotate_before, rotate_after=$rotate_after"
	create_lttng_session_uri $SESSION_NAME net://localhost
	lttng_enable_kernel_event $SESSION_NAME $EVENT_NAME
	start_lttng_tracing_ok $SESSION_NAME
	echo -n "1" > /proc/lttng-test-filter-event
	rotate_session_ok $SESSION_NAME
	echo -n "2" > /proc/lttng-test-filter-event
	do_clear_session $SESSION_NAME $tracing_active $clear_twice $rotate_before $rotate_after
	echo -n "3" > /proc/lttng-test-filter-event

	stop_lttng_tracing_ok $SESSION_NAME

	if [[ $rotate_before -eq 1 ]]; then
		local expect_count=6
	else
		local expect_count=4
	fi
	validate_trace_count $EVENT_NAME $local_path $expect_count

	destroy_lttng_session_ok $SESSION_NAME
}

function test_kernel_streaming_clear_rotate()
{
	local tracing_active=$1
	local clear_twice=$2
	local rotate_before=$3
	local rotate_after=$4
	local local_path="${TRACE_PATH}/${HOSTNAME}/${SESSION_NAME}*"

	diag "Test kernel streaming clear-rotate"
	diag "Parameters: tracing_active=$tracing_active, clear_twice=$clear_twice, rotate_before=$rotate_before, rotate_after=$rotate_after"
	create_lttng_session_uri $SESSION_NAME net://localhost
	lttng_enable_kernel_event $SESSION_NAME $EVENT_NAME
	start_lttng_tracing_ok $SESSION_NAME
	echo -n "1" > /proc/lttng-test-filter-event
	do_clear_session $SESSION_NAME $tracing_active $clear_twice $rotate_before $rotate_after
	echo -n "2" > /proc/lttng-test-filter-event
	rotate_session_ok $SESSION_NAME
	echo -n "3" > /proc/lttng-test-filter-event

	stop_lttng_tracing_ok $SESSION_NAME

	if [[ $rotate_before -eq 1 ]]; then
		local expect_count=6
	else
		local expect_count=5
	fi
	validate_trace_count $EVENT_NAME $local_path $expect_count

	destroy_lttng_session_ok $SESSION_NAME
}

function test_kernel_streaming_live ()
{
	local tracing_active=$1
	local clear_twice=$2
	local local_path="${TRACE_PATH}/${HOSTNAME}/${SESSION_NAME}*"

	diag "Test kernel streaming live clear"
	diag "Parameters: tracing_active=$tracing_active, clear_twice=$clear_twice"
	create_lttng_session_uri $SESSION_NAME net://localhost "--live"
	lttng_enable_kernel_event $SESSION_NAME $EVENT_NAME
	start_lttng_tracing_ok $SESSION_NAME
	# Generate 10 events that will sit in the buffers.
	echo -n "10" > /proc/lttng-test-filter-event
	do_clear_session $SESSION_NAME $tracing_active $clear_twice 0 0
	stop_lttng_tracing_ok $SESSION_NAME

	validate_trace_empty $local_path

	destroy_lttng_session_ok $SESSION_NAME
}

#no clear
function test_kernel_basic_streaming_live_viewer ()
{
	local tracing_active=$1
	local clear_twice=$2
	# 3, 4 unused
	local local_path="${TRACE_PATH}/${HOSTNAME}/${SESSION_NAME}*"
	local remote_trace_path="${HOSTNAME}/${SESSION_NAME}"
	local channel_name="chan"
	local bt_output_path=$(mktemp -t "tmp.${FUNCNAME[0]}_bt_output.XXXXXX")
	local file_sync_before_exit=$(mktemp -u -t "tmp.${FUNCNAME[0]}_sync_before_exit.XXXXXX")

	diag "Test kernel basic streaming live with viewer"
	diag "Parameters: tracing_active=$tracing_active, clear_twice=$clear_twice"
	create_lttng_session_uri $SESSION_NAME net://localhost "--live"
	enable_kernel_lttng_channel_ok $SESSION_NAME $channel_name
	enable_kernel_lttng_event_ok $SESSION_NAME $EVENT_NAME $channel_name
	start_lttng_tracing_ok $SESSION_NAME

	wait_live_trace_ready net://localhost

	# Connect a live viewer
	_run_babeltrace_cmd -i lttng-live net://localhost/host/$remote_trace_path > $bt_output_path &
	local viewer_pid=$!

	wait_live_viewer_connect net://localhost

	echo -n "10" > /proc/lttng-test-filter-event

	diag "Wait until viewer sees all 10 expected events"
	local evcount=0
	while [ $evcount -ne 10 ]; do
		evcount=$(cat $bt_output_path | wc -l)
		sleep 0.5
	done
	pass "Live viewer read $evcount events, expect 10"

	destroy_lttng_session_ok $SESSION_NAME
	touch $file_sync_before_exit
	diag "Wait for viewer to exit"
	wait $viewer_pid
	ok $? "Babeltrace succeeds"
	pass "Wait for viewer to exit"

	rm -f $bt_output_path
	rm -f $file_sync_before_exit
}

function test_kernel_streaming_live_viewer ()
{
	local tracing_active=$1
	local clear_twice=$2
	# 3, 4 unused
	local local_path="${TRACE_PATH}/${HOSTNAME}/${SESSION_NAME}*"
	local remote_trace_path="${HOSTNAME}/${SESSION_NAME}"
	local channel_name="chan"
	local bt_output_path=$(mktemp -t "tmp.${FUNCNAME[0]}_bt_output.XXXXXX")

	diag "Test kernel streaming live clear with viewer"
	diag "Parameters: tracing_active=$tracing_active, clear_twice=$clear_twice"
	create_lttng_session_uri $SESSION_NAME net://localhost "--live"
	enable_kernel_lttng_channel_ok $SESSION_NAME $channel_name
	enable_kernel_lttng_event_ok $SESSION_NAME $EVENT_NAME $channel_name
	start_lttng_tracing_ok $SESSION_NAME

	wait_live_trace_ready net://localhost

	# Connect a live viewer
	_run_babeltrace_cmd -i lttng-live net://localhost/host/$remote_trace_path > $bt_output_path &
	local viewer_pid=$!

	wait_live_viewer_connect net://localhost

	echo -n "10" > /proc/lttng-test-filter-event
	do_clear_session $SESSION_NAME $tracing_active $clear_twice 0 0
	stop_lttng_tracing_ok $SESSION_NAME

	destroy_lttng_session_ok $SESSION_NAME
	diag "Wait for viewer to exit"
	wait $viewer_pid
	ok $? "Babeltrace succeeds"
	pass "Wait for viewer to exit"

	clean_path $bt_output_path
}

function test_kernel_local ()
{
	local tracing_active=$1
	local clear_twice=$2
	local rotate_before=$3
	local rotate_after=$4

	diag "Test kernel local"
	diag "Parameters: tracing_active=$tracing_active, clear_twice=$clear_twice, rotate_before=$rotate_before, rotate_after=$rotate_after"
	create_lttng_session_ok $SESSION_NAME $TRACE_PATH
	lttng_enable_kernel_event $SESSION_NAME $EVENT_NAME
	start_lttng_tracing_ok $SESSION_NAME
	# Generate 10 events that will sit in the buffers.
	echo -n "10" > /proc/lttng-test-filter-event
	do_clear_session $SESSION_NAME $tracing_active $clear_twice $rotate_before $rotate_after
	stop_lttng_tracing_ok $SESSION_NAME

	if [[ $rotate_before -eq 1 ]]; then
		validate_trace_count $EVENT_NAME $TRACE_PATH 10
	else
		validate_trace_empty $TRACE_PATH
	fi

	destroy_lttng_session_ok $SESSION_NAME
}

function test_kernel_local_rotate_clear ()
{
	local tracing_active=$1
	local clear_twice=$2
	local rotate_before=$3
	local rotate_after=$4

	diag "Test kernel local rotate-clear"
	diag "Parameters: tracing_active=$tracing_active, clear_twice=$clear_twice, rotate_before=$rotate_before, rotate_after=$rotate_after"
	create_lttng_session_ok $SESSION_NAME $TRACE_PATH
	lttng_enable_kernel_event $SESSION_NAME $EVENT_NAME
	start_lttng_tracing_ok $SESSION_NAME
	echo -n "1" > /proc/lttng-test-filter-event
	rotate_session_ok $SESSION_NAME
	echo -n "2" > /proc/lttng-test-filter-event
	do_clear_session $SESSION_NAME $tracing_active $clear_twice $rotate_before $rotate_after
	echo -n "3" > /proc/lttng-test-filter-event
	stop_lttng_tracing_ok $SESSION_NAME

	if [[ $rotate_before -eq 1 ]]; then
		local expect_count=6
	else
		local expect_count=4
	fi
	validate_trace_count $EVENT_NAME $TRACE_PATH $expect_count

	destroy_lttng_session_ok $SESSION_NAME
}

function test_kernel_local_clear_rotate()
{
	local tracing_active=$1
	local clear_twice=$2
	local rotate_before=$3
	local rotate_after=$4

	diag "Test kernel local clear-rotate"
	diag "Parameters: tracing_active=$tracing_active, clear_twice=$clear_twice, rotate_before=$rotate_before, rotate_after=$rotate_after"
	create_lttng_session_ok $SESSION_NAME $TRACE_PATH
	lttng_enable_kernel_event $SESSION_NAME $EVENT_NAME
	start_lttng_tracing_ok $SESSION_NAME
	echo -n "1" > /proc/lttng-test-filter-event
	do_clear_session $SESSION_NAME $tracing_active $clear_twice $rotate_before $rotate_after
	echo -n "2" > /proc/lttng-test-filter-event
	rotate_session_ok $SESSION_NAME
	echo -n "3" > /proc/lttng-test-filter-event
	stop_lttng_tracing_ok $SESSION_NAME

	if [[ $rotate_before -eq 1 ]]; then
		local expect_count=6
	else
		local expect_count=5
	fi
	validate_trace_count $EVENT_NAME $TRACE_PATH $expect_count

	destroy_lttng_session_ok $SESSION_NAME
}

function do_kernel_snapshot ()
{
	local session_name=$1
	local trace_path=$2
	local tracing_active=$3
	local clear_twice=$4
	local rotate_before=$5
	local rotate_after=$6

	lttng_enable_kernel_event $session_name $EVENT_NAME
	start_lttng_tracing_ok $session_name

	# Generate 10 events that will sit in the buffers.
	echo -n "10" > /proc/lttng-test-filter-event

	# Take a first snapshot and validate that the events are present.
	lttng_snapshot_record $session_name
	stop_lttng_tracing_ok $session_name
	validate_trace_count $EVENT_NAME $trace_path 10

	# Clean the output path
	clean_path $trace_path
	start_lttng_tracing_ok $session_name

	do_clear_session $SESSION_NAME $tracing_active $clear_twice 0 0

	# Make sure the subsequent snapshot is empty and valid.
	lttng_snapshot_record $session_name
	stop_lttng_tracing_ok $session_name
	validate_trace_empty $trace_path

	# Clean the output path
	clean_path $trace_path
	start_lttng_tracing_ok $session_name

	# Make sure that everything still works, generate events and take a
	# snapshot.
	echo -n "10" > /proc/lttng-test-filter-event
	lttng_snapshot_record $session_name
	stop_lttng_tracing_ok $session_name
	validate_trace_count $EVENT_NAME $trace_path 10
}

function test_kernel_streaming_snapshot ()
{
	local tracing_active=$1
	local clear_twice=$2

	diag "Test kernel streaming snapshot clear"
	diag "Parameters: tracing_active=$tracing_active, clear_twice=$clear_twice"

	create_lttng_session_uri $SESSION_NAME net://localhost "--snapshot"
	do_kernel_snapshot $SESSION_NAME $TRACE_PATH $tracing_active $clear_twice
	destroy_lttng_session_ok $SESSION_NAME
}

function test_kernel_local_snapshot ()
{
	local tracing_active=$1
	local clear_twice=$2

	diag "Test kernel local snapshot clear"
	diag "Parameters: tracing_active=$tracing_active, clear_twice=$clear_twice"

	create_lttng_session_ok $SESSION_NAME $TRACE_PATH "--snapshot"
	do_kernel_snapshot $SESSION_NAME $TRACE_PATH $tracing_active $clear_twice
	destroy_lttng_session_ok $SESSION_NAME
}

function test_kernel_streaming_tracefile_rotation ()
{
	local tracing_active=$1
	local clear_twice=$2
	local rotate_before=$3
	local rotate_after=$4
	local channel_name="rotchan"
	local local_path="${TRACE_PATH}/${HOSTNAME}/${SESSION_NAME}*"

	diag "Test kernel streaming clear with tracefile rotation"
	diag "Parameters: tracing_active=$tracing_active, clear_twice=$clear_twice, rotate_before=$rotate_before, rotate_after=$rotate_after"
	create_lttng_session_uri $SESSION_NAME net://localhost
	enable_kernel_lttng_channel_ok $SESSION_NAME $channel_name --subbuf-size=$PAGE_SIZE \
		--tracefile-size=$PAGE_SIZE --tracefile-count=2
	enable_kernel_lttng_event_ok $SESSION_NAME $EVENT_NAME $channel_name
	start_lttng_tracing_ok $SESSION_NAME
	echo -n "10" > /proc/lttng-test-filter-event
	do_clear_session $SESSION_NAME $tracing_active $clear_twice $rotate_before $rotate_after
	stop_lttng_tracing_ok $SESSION_NAME

	if [[ $rotate_before -eq 1 ]]; then
		validate_trace_count $EVENT_NAME $local_path 10
	else
		validate_trace_empty $local_path
	fi

	start_lttng_tracing_ok $SESSION_NAME
	echo -n "20" > /proc/lttng-test-filter-event
	stop_lttng_tracing_ok

	if [[ $rotate_before -eq 1 ]]; then
		validate_trace_count $EVENT_NAME $local_path 30
	else
		validate_trace_count $EVENT_NAME $local_path 20
	fi

	destroy_lttng_session_ok $SESSION_NAME
}

# With 1 byte per event (as strict minimum), generating 200000 events
# guarantees filling up 2 files of 64k in size, which is the maximum
# page size known on Linux
function test_kernel_streaming_tracefile_rotation_overwrite_files ()
{
	local tracing_active=$1
	local clear_twice=$2
	local rotate_before=$3
	local rotate_after=$4
	local channel_name="rotchan"
	local local_path="${TRACE_PATH}/${HOSTNAME}/${SESSION_NAME}*"

	diag "Test kernel streaming clear with tracefile rotation, overwrite files"
	diag "Parameters: tracing_active=$tracing_active, clear_twice=$clear_twice, rotate_before=$rotate_before, rotate_after=$rotate_after"
	create_lttng_session_uri $SESSION_NAME net://localhost
	enable_kernel_lttng_channel_ok $SESSION_NAME $channel_name --subbuf-size=$PAGE_SIZE \
		--tracefile-size=$PAGE_SIZE --tracefile-count=2
	enable_kernel_lttng_event_ok $SESSION_NAME $EVENT_NAME $channel_name
	start_lttng_tracing_ok $SESSION_NAME
	retry_anycpu_taskset echo -n "200000" > /proc/lttng-test-filter-event
	do_clear_session $SESSION_NAME $tracing_active $clear_twice $rotate_before $rotate_after
	stop_lttng_tracing_ok $SESSION_NAME

	if [[ $rotate_before -eq 1 ]]; then
		validate_trace_count_range_incl_min_excl_max $EVENT_NAME $local_path 1 200000
	else
		validate_trace_empty $local_path
	fi

	start_lttng_tracing_ok $SESSION_NAME
	retry_anycpu_taskset echo -n "400000" > /proc/lttng-test-filter-event
	stop_lttng_tracing_ok

	if [[ $rotate_before -eq 1 ]]; then
		validate_trace_count_range_incl_min_excl_max $EVENT_NAME $local_path 1 600000
	else
		validate_trace_count_range_incl_min_excl_max $EVENT_NAME $local_path 1 200000
	fi

	destroy_lttng_session_ok $SESSION_NAME
}

function test_kernel_disallow_clear ()
{
	diag "Test kernel disallow clear on relay daemon"
	SESSION_NAME=$(randstring 16 0)

	LTTNG_RELAYD_DISALLOW_CLEAR=1 start_lttng_relayd "-o $TRACE_PATH"

	start_lttng_sessiond

	create_lttng_session_uri $SESSION_NAME net://localhost
	enable_kernel_lttng_event_ok $SESSION_NAME $EVENT_NAME
	start_lttng_tracing_ok $SESSION_NAME
	lttng_clear_session_fail $SESSION_NAME
	destroy_lttng_session_ok $SESSION_NAME

	stop_lttng_sessiond
	stop_lttng_relayd
	clean_path $TRACE_PATH
}

plan_tests $NUM_TESTS

print_test_banner "$TEST_DESC"

bail_out_if_no_babeltrace

streaming_tests=(test_kernel_streaming
	test_kernel_streaming_rotate_clear
	test_kernel_streaming_clear_rotate
	test_kernel_streaming_tracefile_rotation
	test_kernel_streaming_tracefile_rotation_overwrite_files
)

live_tests=(test_kernel_streaming_live
	test_kernel_basic_streaming_live_viewer
	test_kernel_streaming_live_viewer
)

local_tests=(test_kernel_local
	test_kernel_local_rotate_clear
	test_kernel_local_clear_rotate
)

snapshot_tests=(test_kernel_streaming_snapshot
	test_kernel_local_snapshot
)

check_skip_kernel_test "$NUM_TESTS" "Skipping kernel streaming tests." ||
{
	trap signal_cleanup SIGTERM SIGINT

	lttng_modules_loaded_fail
	validate_lttng_modules_present

	start_lttng_relayd "-o $TRACE_PATH"
	start_lttng_sessiond
	modprobe lttng-test

	# Clear with tracing active, clear once
	for fct_test in ${streaming_tests[@]} ${live_tests[@]} ${local_tests[@]} ${snapshot_tests[@]};
	do
		SESSION_NAME=$(randstring 16 0)
		${fct_test} 1 0 0 0
		clean_path $TRACE_PATH
	done

	# Clear with tracing active, clear twice
	for fct_test in ${streaming_tests[@]} ${live_tests[@]} ${local_tests[@]} ${snapshot_tests[@]};
	do
		SESSION_NAME=$(randstring 16 0)
		${fct_test} 1 1 0 0
		clean_path $TRACE_PATH
	done

	# Clear with tracing inactive, clear once
	for fct_test in ${streaming_tests[@]} ${live_tests[@]} ${local_tests[@]} ${snapshot_tests[@]};
	do
		SESSION_NAME=$(randstring 16 0)
		${fct_test} 0 0 0 0
		clean_path $TRACE_PATH
	done

	# Clear with tracing inactive, clear twice
	for fct_test in ${streaming_tests[@]} ${live_tests[@]} ${local_tests[@]} ${snapshot_tests[@]};
	do
		SESSION_NAME=$(randstring 16 0)
		${fct_test} 0 1 0 0
		clean_path $TRACE_PATH
	done

	# Clear with tracing inactive, rotate-clear once
	for fct_test in ${streaming_tests[@]} ${local_tests[@]};
	do
		SESSION_NAME=$(randstring 16 0)
		${fct_test} 0 0 1 0
		clean_path $TRACE_PATH
	done

	# Clear with tracing inactive, clear once-rotate(fail)
	for fct_test in ${streaming_tests[@]} ${local_tests[@]};
	do
		SESSION_NAME=$(randstring 16 0)
		${fct_test} 0 0 0 1
		clean_path $TRACE_PATH
	done

	modprobe --remove lttng-test
	stop_lttng_sessiond
	stop_lttng_relayd
	lttng_modules_loaded_fail

	test_kernel_disallow_clear
}

clean_path $TRACE_PATH