SET @tmp=ST_GIS_DEBUG(1);
DROP TABLE IF EXISTS p1;
CREATE PROCEDURE p1(dist DOUBLE, geom TEXT)
BEGIN
DECLARE g GEOMETRY;
SET g=GeomFromText(geom);
SELECT geom AS `-----`;
SELECT dist, GeometryType(@buf:=ST_Buffer(g, dist)) AS `buffer`, ROUND(ST_AREA(@buf),2) AS buf_area;
END|
#
# Testing ST_BUFFER with positive distance
#
-----
POINT(0 0))
dist	buffer	buf_area
1	POLYGON	3.14
-----
LineString(0 1, 1 1))
dist	buffer	buf_area
1	POLYGON	5.14
-----
LineString(9 9,8 1,1 5,0 0)
dist	buffer	buf_area
1	POLYGON	44.63
-----
Polygon((2 2,2 8,8 8,8 2,2 2))
dist	buffer	buf_area
1	POLYGON	63.14
-----
Polygon((0 0,0 8,8 8,8 0,0 0),(2 2,6 2,6 6,2 6,2 2))
dist	buffer	buf_area
1	POLYGON	95.14
-----
Polygon((0 0, 0 8, 8 8, 8 10, -10 10, -10 0, 0 0))
dist	buffer	buf_area
1	POLYGON	174.93
-----
MultiPoint(9 9,8 1,1 5)
dist	buffer	buf_area
1	MULTIPOLYGON	9.42
-----
MultiLineString((0 0,2 2))
dist	buffer	buf_area
1	POLYGON	8.80
-----
MultiLineString((0 0,2 2,0 4))
dist	buffer	buf_area
1	POLYGON	14.24
-----
MultiLineString((0 0,2 2),(0 2,2 0))
dist	buffer	buf_area
1	POLYGON	13.59
-----
MultiLineString((2 2,2 8,-2 8),(-6 -6, 6 6),(10 10, 14 14))
dist	buffer	buf_area
1	MULTIPOLYGON	70.06
-----
MultiPolygon(((2 2,2 8,8 8,8 2,2 2)), ((9 9,8 1,1 5,9 9)))
dist	buffer	buf_area
1	POLYGON	73.18
-----
MultiPolygon(((2 2,2 8,8 8,8 2,2 2), (4 4,4 6,6 6,6 4,4 4)),((9 9,8 1,1 5,9 9)))
dist	buffer	buf_area
1	POLYGON	73.18
-----
GeometryCollection(Point(0 0))
dist	buffer	buf_area
1	POLYGON	3.14
-----
GeometryCollection(LineString(0 0, 2 2)))
dist	buffer	buf_area
1	POLYGON	8.80
-----
GeometryCollection(Polygon((2 2,2 8,8 8,8 2,2 2))))
dist	buffer	buf_area
1	POLYGON	63.14
-----
GeometryCollection(MultiPoint(9 9,8 1,1 5))
dist	buffer	buf_area
1	MULTIPOLYGON	9.42
-----
GeometryCollection(MultiLineString((0 0,0 1),(3 0,3 1)))
dist	buffer	buf_area
1	MULTIPOLYGON	10.28
-----
GeometryCollection(MultiPolygon(((0 0, 3 0, 3 3, 0 3, 0 0)),((6 6,6 9,9 9,9 6,6 6))))
dist	buffer	buf_area
1	MULTIPOLYGON	48.28
-----
GeometryCollection(Point(9 9),LineString(1 5,0 0),Polygon((2 2,2 8,8 8,8 2,2 2)))
dist	buffer	buf_area
1	POLYGON	75.92
#
# Testing ST_BUFFER with zero distance
#
-----
POINT(0 0))
dist	buffer	buf_area
0	POINT	0.00
-----
LineString(0 1, 1 1))
dist	buffer	buf_area
0	LINESTRING	0.00
-----
LineString(9 9,8 1,1 5,0 0)
dist	buffer	buf_area
0	LINESTRING	0.00
-----
Polygon((2 2,2 8,8 8,8 2,2 2))
dist	buffer	buf_area
0	POLYGON	36.00
-----
Polygon((0 0,0 8,8 8,8 0,0 0),(2 2,6 2,6 6,2 6,2 2))
dist	buffer	buf_area
0	POLYGON	48.00
-----
Polygon((0 0, 0 8, 8 8, 8 10, -10 10, -10 0, 0 0))
dist	buffer	buf_area
0	POLYGON	116.00
-----
MultiPoint(9 9,8 1,1 5)
dist	buffer	buf_area
0	MULTIPOINT	NULL
-----
MultiLineString((0 0,2 2))
dist	buffer	buf_area
0	MULTILINESTRING	NULL
-----
MultiLineString((0 0,2 2,0 4))
dist	buffer	buf_area
0	MULTILINESTRING	NULL
-----
MultiLineString((0 0,2 2),(0 2,2 0))
dist	buffer	buf_area
0	MULTILINESTRING	NULL
-----
MultiLineString((2 2,2 8,-2 8),(-6 -6, 6 6),(10 10, 14 14))
dist	buffer	buf_area
0	MULTILINESTRING	NULL
-----
MultiPolygon(((2 2,2 8,8 8,8 2,2 2)), ((9 9,8 1,1 5,9 9)))
dist	buffer	buf_area
0	MULTIPOLYGON	66.00
-----
MultiPolygon(((2 2,2 8,8 8,8 2,2 2), (4 4,4 6,6 6,6 4,4 4)),((9 9,8 1,1 5,9 9)))
dist	buffer	buf_area
0	MULTIPOLYGON	62.00
-----
GeometryCollection(Point(0 0))
dist	buffer	buf_area
0	GEOMETRYCOLLECTION	0.00
-----
GeometryCollection(LineString(0 0, 2 2)))
dist	buffer	buf_area
0	GEOMETRYCOLLECTION	0.00
-----
GeometryCollection(Polygon((2 2,2 8,8 8,8 2,2 2))))
dist	buffer	buf_area
0	GEOMETRYCOLLECTION	36.00
-----
GeometryCollection(MultiPoint(9 9,8 1,1 5))
dist	buffer	buf_area
0	GEOMETRYCOLLECTION	NULL
-----
GeometryCollection(MultiLineString((0 0,0 1),(3 0,3 1)))
dist	buffer	buf_area
0	GEOMETRYCOLLECTION	NULL
-----
GeometryCollection(MultiPolygon(((0 0, 3 0, 3 3, 0 3, 0 0)),((6 6,6 9,9 9,9 6,6 6))))
dist	buffer	buf_area
0	GEOMETRYCOLLECTION	18.00
-----
GeometryCollection(Point(9 9),LineString(1 5,0 0),Polygon((2 2,2 8,8 8,8 2,2 2)))
dist	buffer	buf_area
0	GEOMETRYCOLLECTION	36.00
#
# Testing ST_BUFFER with negative distance
#
-----
POINT(0 0))
dist	buffer	buf_area
-1	GEOMETRYCOLLECTION	0.00
-----
LineString(0 1, 1 1))
dist	buffer	buf_area
-1	GEOMETRYCOLLECTION	0.00
-----
LineString(9 9,8 1,1 5,0 0)
dist	buffer	buf_area
-1	GEOMETRYCOLLECTION	0.00
-----
Polygon((2 2,2 8,8 8,8 2,2 2))
dist	buffer	buf_area
-1	POLYGON	16.00
-----
MultiPoint(9 9,8 1,1 5)
dist	buffer	buf_area
-1	GEOMETRYCOLLECTION	0.00
-----
MultiLineString((0 0,2 2))
dist	buffer	buf_area
-1	GEOMETRYCOLLECTION	0.00
-----
MultiLineString((0 0,2 2,0 4))
dist	buffer	buf_area
-1	GEOMETRYCOLLECTION	0.00
-----
MultiLineString((0 0,2 2),(0 2,2 0))
dist	buffer	buf_area
-1	GEOMETRYCOLLECTION	0.00
-----
MultiLineString((2 2,2 8,-2 8),(-6 -6, 6 6),(10 10, 14 14))
dist	buffer	buf_area
-1	GEOMETRYCOLLECTION	0.00
-----
GeometryCollection(Point(0 0))
dist	buffer	buf_area
-1	GEOMETRYCOLLECTION	0.00
-----
GeometryCollection(LineString(0 0, 2 2)))
dist	buffer	buf_area
-1	GEOMETRYCOLLECTION	0.00
-----
GeometryCollection(Polygon((2 2,2 8,8 8,8 2,2 2))))
dist	buffer	buf_area
-1	POLYGON	16.00
-----
GeometryCollection(MultiPoint(9 9,8 1,1 5))
dist	buffer	buf_area
-1	GEOMETRYCOLLECTION	0.00
-----
GeometryCollection(MultiLineString((0 0,0 1),(3 0,3 1)))
dist	buffer	buf_area
-1	GEOMETRYCOLLECTION	0.00
-----
GeometryCollection(Point(9 9),LineString(1 5,0 0),Polygon((2 2,2 8,8 8,8 2,2 2)))
dist	buffer	buf_area
-1	POLYGON	16.00
SELECT ST_CONTAINS(
GeomFromText('MULTIPOLYGON(((0 0, 0 5, 5 5, 5 0, 0 0)),((6 6, 6 11, 11 11, 11 6, 6 6)))'),
GeomFromText('POINT(5 10)')) as geom;
geom
0
SELECT AsText(ST_UNION(
GeomFromText('MULTIPOLYGON(((0 0, 0 5, 5 5, 5 0, 0 0)),((6 6, 6 11, 11 11, 11 6, 6 6)))'),
GeomFromText('POINT(5 10)'))) as geom;
geom
GEOMETRYCOLLECTION(POLYGON((0 0,0 5,5 5,5 0,0 0)),POLYGON((6 6,6 11,11 11,11 6,6 6)),POINT(5 10))
DROP PROCEDURE p1;
#
# Bug #13833019 ASSERTION `T1->RESULT_RANGE' FAILED IN GCALC_OPERATION_REDUCER::END_COUPLE
#
SELECT GeometryType(ST_BUFFER(MULTIPOLYGONFROMTEXT('MULTIPOLYGON(((0 0,9 4,3 3,0 0)),((2 2,2 2,8 8,2 3,2 2)))'), 3)) as geom;
geom
POLYGON
#
# Bug #13832749 	HANDLE_FATAL_SIGNAL IN GCALC_FUNCTION::COUNT_INTERNAL
#
SELECT GeometryType(ST_BUFFER(MULTIPOLYGONFROMTEXT('MULTIPOLYGON(((3 5,2 5,2 4,3 4,3 5)),((2 2,2 8,8 8,8 2,2 2), (4 4,4 6,6 6,6 4,4 4)), ((9 9,8 1,1 5,9 9)))'),1)) as geom;
geom
POLYGON
#
# Bug#13358363 - ASSERTION: N > 0 && N < SINUSES_CALCULATED*2+1 | GET_N_SINCOS/ADD_EDGE_BUFFER
#
DO ST_BUFFER(ST_GEOMCOLLFROMTEXT('linestring(1 1,2 2)'),'');
Warnings:
Warning	1292	Truncated incorrect DOUBLE value: ''
SELECT ST_WITHIN(
LINESTRINGFROMTEXT(' LINESTRING(3 8,9 2,3 8,3 3,7 6,4 7,4 7,8 1) '),
ST_BUFFER(MULTIPOLYGONFROMTEXT(' MULTIPOLYGON(((3 5,2 5,2 4,3 4,3 5)),((2 2,2 8,8 8,8 2,2 2),(4 4,4 6,6 6,6 4,4 4)),((0 5,3 5,3 2,1 2,1 1,3 1,3 0,0 0,0 3,2 3,2 4,0 4,0 5))) '),
ST_NUMINTERIORRINGS(POLYGONFROMTEXT('POLYGON((3 5,2 4,2 5,3 5)) ')))) as st;
st
0
SELECT ST_DIMENSION(ST_BUFFER(POLYGONFROMTEXT(' POLYGON((3 5,2 5,2 4,3 4,3 5)) '),
ST_NUMINTERIORRINGS(POLYGONFROMTEXT(' POLYGON((0 0,9 3,4 2,0 0))')))) as st;
st
2
SELECT ST_NUMINTERIORRINGS(
ST_ENVELOPE(ST_BUFFER(MULTIPOLYGONFROMTEXT('MULTIPOLYGON(((3 5,2 5,2 4,3 4,3 5))) '),
SRID(MULTILINESTRINGFROMTEXT('MULTILINESTRING((2 2,4 2,1 2,2 4,2 2)) '))))) as st;
st
0
SELECT ASTEXT(ST_BUFFER(POLYGONFROMTEXT(' POLYGON((9 9,5 2,4 5,9 9))'),
SRID(GEOMETRYFROMTEXT(' MULTIPOINT(8 4,5 0,7 8,6 9,3 4,7 3,5 5) ')))) as st;
st
POLYGON((9 9,5 2,4 5,9 9))
#
# Start of 10.2 tests
#
#
# MDEV-10134 Add full support for DEFAULT
#
CREATE TABLE t1 (a INT DEFAULT ST_GIS_DEBUG(1));
ERROR HY000: Function or expression 'st_gis_debug()' cannot be used in the DEFAULT clause of `a`
#
# End of 10.2 tests
#
#
# Start of 10.3 tests
#
#
# Comparison data type aggregation for pluggable data types
#
SET SESSION debug_dbug="+d,Item_func_in";
SET SESSION debug_dbug="+d,Predicant_to_list_comparator";
CREATE TABLE t1 (a POINT);
INSERT INTO t1 VALUES (POINT(1,1)),(POINT(1,2)),(POINT(1,3));
SELECT COUNT(*) FROM t1 WHERE a IN (POINT(1,1),POINT(10,20),POINT(10,30));
COUNT(*)
1
Warnings:
Note	1105	DBUG: [0] arg=1 handler=0 (geometry)
Note	1105	DBUG: [1] arg=2 handler=0 (geometry)
Note	1105	DBUG: [2] arg=3 handler=0 (geometry)
Note	1105	DBUG: types_compatible=yes bisect=yes
SELECT COUNT(*) FROM t1 WHERE a IN (POINT(1,1),POINT(10,20),POINT(10,30),'test');
COUNT(*)
1
Warnings:
Note	1105	DBUG: [0] arg=1 handler=0 (geometry)
Note	1105	DBUG: [1] arg=2 handler=0 (geometry)
Note	1105	DBUG: [2] arg=3 handler=0 (geometry)
Note	1105	DBUG: [3] arg=4 handler=3 (longblob)
Note	1105	DBUG: types_compatible=no bisect=no
SELECT COUNT(*) FROM t1 WHERE a IN ('test','test1');
COUNT(*)
0
Warnings:
Note	1105	DBUG: [0] arg=1 handler=0 (longblob)
Note	1105	DBUG: [1] arg=2 handler=0 (longblob)
Note	1105	DBUG: types_compatible=yes bisect=yes
DROP TABLE t1;
CREATE TABLE t1 (a TEXT);
INSERT INTO t1 VALUES ('test'),('test1'),('test2');
SELECT * FROM t1 WHERE a IN ('test',POINT(1,1));
a
test
Warnings:
Note	1105	DBUG: [0] arg=1 handler=0 (longblob)
Note	1105	DBUG: [1] arg=2 handler=0 (longblob)
Note	1105	DBUG: types_compatible=yes bisect=yes
DROP TABLE t1;
SET SESSION debug_dbug="-d,Predicant_to_list_comparator";
SET SESSION debug_dbug="-d,Item_func_in";
#
# MDEV-12238 Add Type_handler::Item_func_{plus|minus|mul|div|mod}_fix_length_and_dec()
#
SET debug_dbug='+d,num_op';
SELECT POINT(0,0)+POINT(0,0);
ERROR HY000: Illegal parameter data types point and point for operation '+'
SELECT POINT(0,0)-POINT(0,0);
ERROR HY000: Illegal parameter data types point and point for operation '-'
SELECT POINT(0,0)*POINT(0,0);
ERROR HY000: Illegal parameter data types point and point for operation '*'
SELECT POINT(0,0)/POINT(0,0);
ERROR HY000: Illegal parameter data types point and point for operation '/'
SELECT POINT(0,0) MOD POINT(0,0);
ERROR HY000: Illegal parameter data types point and point for operation 'MOD'
CREATE TABLE t1 AS SELECT
POINT(0,0)+'0',
POINT(0,0)-'0',
POINT(0,0)*'0',
POINT(0,0)/'0',
POINT(0,0) MOD '0' LIMIT 0;
SHOW CREATE TABLE t1;
Table	Create Table
t1	CREATE TABLE `t1` (
  `POINT(0,0)+'0'` tinytext CHARACTER SET latin1 COLLATE latin1_swedish_ci DEFAULT NULL,
  `POINT(0,0)-'0'` tinytext CHARACTER SET latin1 COLLATE latin1_swedish_ci DEFAULT NULL,
  `POINT(0,0)*'0'` tinytext CHARACTER SET latin1 COLLATE latin1_swedish_ci DEFAULT NULL,
  `POINT(0,0)/'0'` tinytext CHARACTER SET latin1 COLLATE latin1_swedish_ci DEFAULT NULL,
  `POINT(0,0) MOD '0'` tinytext CHARACTER SET latin1 COLLATE latin1_swedish_ci DEFAULT NULL
) ENGINE=MyISAM DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_uca1400_ai_ci
DROP TABLE t1;
CREATE TABLE t1 AS SELECT
'0'+POINT(0,0),
'0'*POINT(0,0) LIMIT 0;
SHOW CREATE TABLE t1;
Table	Create Table
t1	CREATE TABLE `t1` (
  `'0'+POINT(0,0)` tinytext CHARACTER SET latin1 COLLATE latin1_swedish_ci DEFAULT NULL,
  `'0'*POINT(0,0)` tinytext CHARACTER SET latin1 COLLATE latin1_swedish_ci DEFAULT NULL
) ENGINE=MyISAM DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_uca1400_ai_ci
DROP TABLE t1;
CREATE TABLE t1 AS SELECT '0'-POINT(0,0) LIMIT 0;
ERROR HY000: Illegal parameter data types varchar and point for operation '-'
CREATE TABLE t1 AS SELECT '0'/POINT(0,0) LIMIT 0;
ERROR HY000: Illegal parameter data types varchar and point for operation '/'
CREATE TABLE t1 AS SELECT '0' MOD POINT(0,0) LIMIT 0;
ERROR HY000: Illegal parameter data types varchar and point for operation 'MOD'
SET debug_dbug='-d,num_op';
#
# End of 10.3 tests
#
#
# Start of 10.4 tests
#
#
# MDEV-16454 Bad results for IN with ROW
#
SET SESSION debug_dbug="+d,cmp_item";
SET SESSION debug_dbug="+d,Item_func_in";
SET SESSION debug_dbug="+d,Predicant_to_list_comparator";
SELECT (POINT(1,1),0) IN ((POINT(1,1),0),((POINT(1,1)),1));
(POINT(1,1),0) IN ((POINT(1,1),0),((POINT(1,1)),1))
1
Warnings:
Note	1105	DBUG: [0] arg=1 handler=0 (row)
Note	1105	DBUG: [1] arg=2 handler=0 (row)
Note	1105	DBUG: ROW(3 args) level=0
Note	1105	DBUG:  [0,0] handler=point
Note	1105	DBUG:  [0,1] handler=point
Note	1105	DBUG:  [0,2] handler=point
Note	1105	DBUG:  => handler=geometry
Note	1105	DBUG:  [1,0] handler=int
Note	1105	DBUG:  [1,1] handler=int
Note	1105	DBUG:  [1,2] handler=int
Note	1105	DBUG:  => handler=bigint
Note	1105	DBUG: types_compatible=yes bisect=no
SELECT (1,(POINT(1,1),0)) IN ((1,(POINT(1,1),0)),(0,(POINT(1,1),0)));
(1,(POINT(1,1),0)) IN ((1,(POINT(1,1),0)),(0,(POINT(1,1),0)))
1
Warnings:
Note	1105	DBUG: [0] arg=1 handler=0 (row)
Note	1105	DBUG: [1] arg=2 handler=0 (row)
Note	1105	DBUG: ROW(3 args) level=0
Note	1105	DBUG:  [0,0] handler=int
Note	1105	DBUG:  [0,1] handler=int
Note	1105	DBUG:  [0,2] handler=int
Note	1105	DBUG:  => handler=bigint
Note	1105	DBUG:  [1,0] handler=row
Note	1105	DBUG:  [1,1] handler=row
Note	1105	DBUG:  [1,2] handler=row
Note	1105	DBUG:  => handler=row
Note	1105	DBUG:  ROW(3 args) level=1
Note	1105	DBUG:   [0,0] handler=point
Note	1105	DBUG:   [0,1] handler=point
Note	1105	DBUG:   [0,2] handler=point
Note	1105	DBUG:   => handler=geometry
Note	1105	DBUG:   [1,0] handler=int
Note	1105	DBUG:   [1,1] handler=int
Note	1105	DBUG:   [1,2] handler=int
Note	1105	DBUG:   => handler=bigint
Note	1105	DBUG: types_compatible=yes bisect=no
SELECT (1,0) IN ((POINT(1,1),0),(0,0));
ERROR HY000: Illegal parameter data types int and point for operation 'in'
SHOW WARNINGS;
Level	Code	Message
Note	1105	DBUG: [0] arg=1 handler=0 (row)
Note	1105	DBUG: [1] arg=2 handler=0 (row)
Note	1105	DBUG: ROW(3 args) level=0
Note	1105	DBUG:  [0,0] handler=int
Note	1105	DBUG:  [0,1] handler=point
Note	1105	DBUG:  [0,2] handler=int
Error	4078	Illegal parameter data types int and point for operation 'in'
SELECT (1,(0,0)) IN ((1,(POINT(1,1),0)),(0,(0,0)));
ERROR HY000: Illegal parameter data types int and point for operation 'in'
SHOW WARNINGS;
Level	Code	Message
Note	1105	DBUG: [0] arg=1 handler=0 (row)
Note	1105	DBUG: [1] arg=2 handler=0 (row)
Note	1105	DBUG: ROW(3 args) level=0
Note	1105	DBUG:  [0,0] handler=int
Note	1105	DBUG:  [0,1] handler=int
Note	1105	DBUG:  [0,2] handler=int
Note	1105	DBUG:  => handler=bigint
Note	1105	DBUG:  [1,0] handler=row
Note	1105	DBUG:  [1,1] handler=row
Note	1105	DBUG:  [1,2] handler=row
Note	1105	DBUG:  => handler=row
Note	1105	DBUG:  ROW(3 args) level=1
Note	1105	DBUG:   [0,0] handler=int
Note	1105	DBUG:   [0,1] handler=point
Note	1105	DBUG:   [0,2] handler=int
Error	4078	Illegal parameter data types int and point for operation 'in'
SET SESSION debug_dbug="-d,Predicant_to_list_comparator";
SET SESSION debug_dbug="-d,Item_func_in";
SET SESSION debug_dbug="-d,cmp_item";
#
# End of 10.4 tests
#
#
# Start of 10.5 tests
#
#
# MDEV-19994 Add class Function_collection
#
SET SESSION debug_dbug="+d,make_item_func_call_native_simulate_not_found";
SELECT CONTAINS(POINT(1,1),POINT(1,1));
ERROR 42000: You have an error in your SQL syntax; check the manual that corresponds to your MariaDB server version for the right syntax to use near '(POINT(1,1),POINT(1,1))' at line 1
SELECT WITHIN(POINT(1,1),POINT(1,1));
ERROR 42000: You have an error in your SQL syntax; check the manual that corresponds to your MariaDB server version for the right syntax to use near '(POINT(1,1),POINT(1,1))' at line 1
SET SESSION debug_dbug="-d,make_item_func_call_native_simulate_not_found";
#
# MDEV-20009 Add CAST(expr AS pluggable_type)
#
SET SESSION debug_dbug="+d,emulate_geometry_create_typecast_item";
SELECT AsText(CAST('POINT(0 0)' AS GEOMETRY));
AsText(CAST('POINT(0 0)' AS GEOMETRY))
POINT(0 0)
SET SESSION debug_dbug="-d,emulate_geometry_create_typecast_item";
#
# End of 10.5 tests
#