/*******************************************************************************
*
* McXtrace, X-ray tracing package
*         Copyright, All rights reserved
*         DTU Physics, Kgs. Lyngby, Denmark
*         Synchrotron SOLEIL, Saint-Aubin, France
*
* Component: SasView_linear_pearls
*
* %Identification
* Written by: Jose Robledo
* Based on sasmodels from SasView
* Origin: FZJ / DTU / ESS DMSC
*
*
* SasView linear_pearls model component as sample description.
*
* %Description
*
* SasView_linear_pearls component, generated from linear_pearls.c in sasmodels.
*
* Example: 
*  SasView_linear_pearls(radius, edge_sep, num_pearls, sld, sld_solvent, 
*     model_scale=1.0, model_abs=0.0, xwidth=0.01, yheight=0.01, zdepth=0.005, R=0, 
*     int target_index=1, target_x=0, target_y=0, target_z=1,
*     focus_xw=0.5, focus_yh=0.5, focus_aw=0, focus_ah=0, focus_r=0, 
*     pd_radius=0.0)
*
* %Parameters
* INPUT PARAMETERS:
* radius: [Ang] ([0, inf]) Radius of the pearls.
* edge_sep: [Ang] ([0, inf]) Length of the string segment - surface to surface.
* num_pearls: [] ([1, inf]) Number of the pearls.
* sld: [1e-6/Ang^2] ([-inf, inf]) SLD of the pearl spheres.
* sld_solvent: [1e-6/Ang^2] ([-inf, inf]) SLD of the solvent.
* Optional parameters:
* model_abs: [ ] Absorption cross section density at 2200 m/s.
* model_scale: [ ] Global scale factor for scattering kernel. For systems without inter-particle interference, the form factors can be related to the scattering intensity by the particle volume fraction.
* xwidth: [m] ([-inf, inf]) Horiz. dimension of sample, as a width.
* yheight: [m] ([-inf, inf]) vert . dimension of sample, as a height for cylinder/box
* zdepth: [m] ([-inf, inf]) depth of sample
* R: [m] Outer radius of sample in (x,z) plane for cylinder/sphere.
* target_x: [m] relative focus target position.
* target_y: [m] relative focus target position.
* target_z: [m] relative focus target position.
* target_index: [ ] Relative index of component to focus at, e.g. next is +1.
* focus_xw: [m] horiz. dimension of a rectangular area.
* focus_yh: [m], vert. dimension of a rectangular area.
* focus_aw: [deg], horiz. angular dimension of a rectangular area.
* focus_ah: [deg], vert. angular dimension of a rectangular area.
* focus_r: [m] case of circular focusing, focusing radius.
* pd_radius: [] (0,inf) defined as (dx/x), where x is de mean value and dx the standard devition of the variable
*
* %Link
* %End
*******************************************************************************/
DEFINE COMPONENT SasView_linear_pearls

SETTING PARAMETERS (
        radius=80.0,
        edge_sep=350.0,
        num_pearls=3.0,
        sld=1.0,
        sld_solvent=6.3,
        model_scale=1.0,
        model_abs=0.0,
        xwidth=0.01,
        yheight=0.01,
        zdepth=0.005,
        R=0,
        target_x=0,
        target_y=0,
        target_z=1,
        int target_index=1,
        focus_xw=0.5,
        focus_yh=0.5,
        focus_aw=0,
        focus_ah=0,
        focus_r=0,
        pd_radius=0.0)


SHARE %{
%include "sas_kernel_header.c"

/* BEGIN Required header for SASmodel linear_pearls */
#define HAS_Iq
#define FORM_VOL

#ifndef SAS_HAVE_sas_3j1x_x
#define SAS_HAVE_sas_3j1x_x

#line 1 "sas_3j1x_x"
/**
* Spherical Bessel function 3*j1(x)/x
*
* Used for low q to avoid cancellation error.
* Note that the values differ from sasview ~ 5e-12 rather than 5e-14, but
* in this case it is likely cancellation errors in the original expression
* using double precision that are the source.
*/
double sas_3j1x_x(double q);

// The choice of the number of terms in the series and the cutoff value for
// switching between series and direct calculation depends on the numeric
// precision.
//
// Point where direct calculation reaches machine precision:
//
//   single machine precision eps 3e-8 at qr=1.1 **
//   double machine precision eps 4e-16 at qr=1.1
//
// Point where Taylor series reaches machine precision (eps), where taylor
// series matches direct calculation (cross) and the error at that point:
//
//   prec   n eps  cross  error
//   single 3 0.28  0.4   6.2e-7
//   single 4 0.68  0.7   2.3e-7
//   single 5 1.18  1.2   7.5e-8
//   double 3 0.01  0.03  2.3e-13
//   double 4 0.06  0.1   3.1e-14
//   double 5 0.16  0.2   5.0e-15
//
// ** Note: relative error on single precision starts increase on the direct
// method at qr=1.1, rising from 3e-8 to 5e-5 by qr=1e3.  This should be
// safe for the sans range, with objects of 100 nm supported to a q of 0.1
// while maintaining 5 digits of precision.  For usans/sesans, the objects
// are larger but the q is smaller, so again it should be fine.
//
// See explore/sph_j1c.py for code to explore these ranges.

// Use 4th order series
#if FLOAT_SIZE>4
#define SPH_J1C_CUTOFF 0.1
#else
#define SPH_J1C_CUTOFF 0.7
#endif
#pragma acc routine seq
double sas_3j1x_x(double q)
{
    // 2017-05-18 PAK - support negative q
    if (fabs(q) < SPH_J1C_CUTOFF) {
        const double q2 = q*q;
        return (1.0 + q2*(-3./30. + q2*(3./840. + q2*(-3./45360.))));// + q2*(3./3991680.)))));
    } else {
        double sin_q, cos_q;
        SINCOS(q, sin_q, cos_q);
        return 3.0*(sin_q/q - cos_q)/(q*q);
    }
}


#endif // SAS_HAVE_sas_3j1x_x


#ifndef SAS_HAVE_linear_pearls
#define SAS_HAVE_linear_pearls

#line 1 "linear_pearls"
double form_volume_linear_pearls(double radius, double num_pearls);

double Iq_linear_pearls(double q,
            double radius,
            double edge_sep,
            double fp_num_pearls,
            double pearl_sld,
            double solvent_sld);

double linear_pearls_kernel(double q,
            double radius,
            double edge_sep,
            int num_pearls,
            double pearl_sld,
            double solvent_sld);


double form_volume_linear_pearls(double radius, double fp_num_pearls)
{
    int num_pearls = (int)(fp_num_pearls + 0.5);
    // Pearl volume
    double pearl_vol = M_4PI_3 * cube(radius);
    // Return total volume
    return num_pearls * pearl_vol;;
}

double linear_pearls_kernel(double q,
            double radius,
            double edge_sep,
            int num_pearls,
            double pearl_sld,
            double solvent_sld)
{
    //relative sld
    double contrast_pearl = pearl_sld - solvent_sld;
    //each volume
    double pearl_vol = M_4PI_3 * cube(radius);
    //total volume
    double tot_vol = num_pearls * pearl_vol;
    //mass
    double m_s = contrast_pearl * pearl_vol;
    //center to center distance between the neighboring pearls
    double separation = edge_sep + 2.0 * radius;

    //sine functions of a pearl
    double psi = sas_3j1x_x(q * radius);

    // N pearls interaction terms
    double structure_factor = (double)num_pearls;
    for(int num=1; num<num_pearls; num++) {
        structure_factor += 2.0*(num_pearls-num)*sas_sinx_x(q*separation*num);
    }
    // form factor for num_pearls
    double form_factor = 1.0e-4 * structure_factor * square(m_s*psi) / tot_vol;

    return form_factor;
}

double Iq_linear_pearls(double q,
            double radius,
            double edge_sep,
            double fp_num_pearls,
            double pearl_sld,
            double solvent_sld)
{

    int num_pearls = (int)(fp_num_pearls + 0.5);
	double result = linear_pearls_kernel(q,
                    radius,
                    edge_sep,
                    num_pearls,
                    pearl_sld,
                    solvent_sld);

	return result;
}


#endif // SAS_HAVE_linear_pearls



/* END Required header for SASmodel linear_pearls */
%}
    DECLARE
%{
  double shape;
  double my_a_k;
%}

INITIALIZE
%{
shape=-1;  /* -1:no shape, 0:cyl, 1:box, 2:sphere  */
if (xwidth && yheight && zdepth)
    shape=1;
  else if (R > 0 && yheight)
    shape=0;
  else if (R > 0 && !yheight)
    shape=2;
  if (shape < 0)
    exit(fprintf(stderr, "SasView_model: %s: sample has invalid dimensions.\n"
                         "ERROR     Please check parameter values.\n", NAME_CURRENT_COMP));

  /* now compute target coords if a component index is supplied */
  if (!target_index && !target_x && !target_y && !target_z) target_index=1;
  if (target_index)
  {
    Coords ToTarget;
    ToTarget = coords_sub(POS_A_COMP_INDEX(INDEX_CURRENT_COMP+target_index),POS_A_CURRENT_COMP);
    ToTarget = rot_apply(ROT_A_CURRENT_COMP, ToTarget);
    coords_get(ToTarget, &target_x, &target_y, &target_z);
  }

  if (!(target_x || target_y || target_z)) {
    printf("SasView_model: %s: The target is not defined. Using direct beam (Z-axis).\n",
      NAME_CURRENT_COMP);
    target_z=1;
  }

  /*TODO fix absorption*/
  my_a_k = model_abs; /* assume absorption is given in 1/m */

%}


TRACE
%{
  double l0, l1, k, l_full, l, dl, d_Phi;
  double aim_x=0, aim_y=0, aim_z=1, axis_x, axis_y, axis_z;
  double f, solid_angle, kx_i, ky_i, kz_i, q, qx, qy, qz;
  char intersect=0;

  /* Intersection photon trajectory / sample (sample surface) */
  if (shape == 0){
    intersect = cylinder_intersect(&l0, &l1, x, y, z, kx, ky, kz, R, yheight);}
  else if (shape == 1){
    intersect = box_intersect(&l0, &l1, x, y, z, kx, ky, kz, xwidth, yheight, zdepth);}
  else if (shape == 2){
    intersect = sphere_intersect(&l0, &l1, x, y, z, kx, ky, kz, R);}
  if(intersect)
  {
    if(l0 < 0)
      ABSORB;

    /* Photon enters at l0. */
    k = sqrt(kx*kx + ky*ky + kz*kz);
    l_full = (l1 - l0);          /* Length of full path through sample */
    dl = rand01()*(l1 - l0) + l0;    /* Point of scattering */
    PROP_DL(dl);                     /* Point of scattering */
    l = (dl-l0);                   /* Penetration in sample */

    kx_i=kx;
    ky_i=ky;
    kz_i=kz;
    if ((target_x || target_y || target_z)) {
      aim_x = target_x-x;            /* Vector pointing at target (anal./det.) */
      aim_y = target_y-y;
      aim_z = target_z-z;
    }
    if(focus_aw && focus_ah) {
      randvec_target_rect_angular(&kx, &ky, &kz, &solid_angle,
        aim_x, aim_y, aim_z, focus_aw, focus_ah, ROT_A_CURRENT_COMP);
    } else if(focus_xw && focus_yh) {
      randvec_target_rect(&kx, &ky, &kz, &solid_angle,
        aim_x, aim_y, aim_z, focus_xw, focus_yh, ROT_A_CURRENT_COMP);
    } else {
      randvec_target_circle(&kx, &ky, &kz, &solid_angle, aim_x, aim_y, aim_z, focus_r);
    }
    NORM(kx, ky, kz);
    kx *= k;
    ky *= k;
    kz *= k;
    qx = (kx_i-kx);
    qy = (ky_i-ky);
    qz = (kz_i-kz);
    q = sqrt(qx*qx+qy*qy+qz*qz);
    
    double trace_radius=radius;
    if ( pd_radius!=0.0 ){
    trace_radius = (randnorm()*pd_radius+1.0)*radius;
    }

        


    // Sample dependent. Retrieved from SasView./////////////////////
    float Iq_out;
    Iq_out = 1;

    Iq_out = Iq_linear_pearls(q, trace_radius, edge_sep, num_pearls, sld, sld_solvent);


    float vol;
    vol = 1;

    // Scale by 1.0E2 [SasView: 1/cm  ->   McXtrace: 1/m]
    Iq_out = model_scale*Iq_out / vol * 1.0E2;

    
    p *= l_full*solid_angle/(4*PI)*Iq_out*exp(-my_a_k*(l+l1));


    SCATTER;
  }
%}

MCDISPLAY
%{

  if (shape == 0) {	/* cylinder */
    circle("xz", 0,  yheight/2.0, 0, R);
    circle("xz", 0, -yheight/2.0, 0, R);
    line(-R, -yheight/2.0, 0, -R, +yheight/2.0, 0);
    line(+R, -yheight/2.0, 0, +R, +yheight/2.0, 0);
    line(0, -yheight/2.0, -R, 0, +yheight/2.0, -R);
    line(0, -yheight/2.0, +R, 0, +yheight/2.0, +R);
  }
  else if (shape == 1) { 	/* box */
    double xmin = -0.5*xwidth;
    double xmax =  0.5*xwidth;
    double ymin = -0.5*yheight;
    double ymax =  0.5*yheight;
    double zmin = -0.5*zdepth;
    double zmax =  0.5*zdepth;
    multiline(5, xmin, ymin, zmin,
                 xmax, ymin, zmin,
                 xmax, ymax, zmin,
                 xmin, ymax, zmin,
                 xmin, ymin, zmin);
    multiline(5, xmin, ymin, zmax,
                 xmax, ymin, zmax,
                 xmax, ymax, zmax,
                 xmin, ymax, zmax,
                 xmin, ymin, zmax);
    line(xmin, ymin, zmin, xmin, ymin, zmax);
    line(xmax, ymin, zmin, xmax, ymin, zmax);
    line(xmin, ymax, zmin, xmin, ymax, zmax);
    line(xmax, ymax, zmin, xmax, ymax, zmax);
  }
  else if (shape == 2) {	/* sphere */
    circle("xy", 0,  0.0, 0, R);
    circle("xz", 0,  0.0, 0, R);
    circle("yz", 0,  0.0, 0, R);
  }
%}
END