dnl This is acinclude.m4 - to be read by aclocal, which builds aclocal.m4.
dnl
dnl This file was downloaded as acx_pthread.m4 from
dnl http://www.gnu.org/software/ac-archive/Installed_Packages/acx_pthread.m4 .
dnl It is in the GNU autoconf macro archive at
dnl http://www.gnu.org/software/ac-archive/ .  This page reads:
dnl
dnl  Please note that every macro contained in this archive is copyrighted by its
dnl  respective author, unless the macro source explicitely says otherwise.
dnl  Permission has been granted, though, to use and distribute all macros under the
dnl  following license, which is a modified version of the GNU General Public
dnl  License version 2:
dnl 
dnl  Every Autoconf macro presented on this web site is free software; you can
dnl  redistribute it and/or modify it under the terms of the GNU General Public
dnl  License as published by the Free Software Foundation; either version 2, or (at
dnl  your option) any later version.
dnl 
dnl  They are distributed in the hope that they will be useful, but WITHOUT ANY
dnl  WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
dnl  PARTICULAR PURPOSE. See the GNU General Public License for more details. (You
dnl  should have received a copy of the GNU General Public License along with this
dnl  program; if not, write to the Free Software Foundation, Inc., 59 Temple Place
dnl  -- Suite 330, Boston, MA 02111-1307, USA.)
dnl 
dnl  As a special exception, the Free Software Foundation gives unlimited permission
dnl  to copy, distribute and modify the configure scripts that are the output of
dnl  Autoconf. You need not follow the terms of the GNU General Public License when
dnl  using or distributing such scripts, even though portions of the text of
dnl  Autoconf appear in them. The GNU General Public License (GPL) does govern all
dnl  other use of the material that constitutes the Autoconf program.
dnl 
dnl  Certain portions of the Autoconf source text are designed to be copied (in
dnl  certain cases, depending on the input) into the output of Autoconf. We call
dnl  these the "data" portions. The rest of the Autoconf source text consists of
dnl  comments plus executable code that decides which of the data portions to output
dnl  in any given case. We call these comments and executable code the "non-data"
dnl  portions. Autoconf never copies any of the non-data portions into its output.
dnl 
dnl  This special exception to the GPL applies to versions of Autoconf released by
dnl  the Free Software Foundation. When you make and distribute a modified version
dnl  of Autoconf, you may extend this special exception to the GPL to apply to your
dnl  modified version as well, *unless* your modified version has the potential to
dnl  copy into its output some of the text that was the non-data portion of the
dnl  version that you started with. (In other words, unless your change moves or
dnl  copies text from the non-data portions to the data portions.) If your
dnl  modification has such potential, you must delete any notice of this special
dnl  exception to the GPL from your modified version.
dnl
dnl
dnl
dnl @synopsis ACX_PTHREAD([ACTION-IF-FOUND[, ACTION-IF-NOT-FOUND]])
dnl
dnl This macro figures out how to build C programs using POSIX
dnl threads.  It sets the PTHREAD_LIBS output variable to the threads
dnl library and linker flags, and the PTHREAD_CFLAGS output variable
dnl to any special C compiler flags that are needed.  (The user can also
dnl force certain compiler flags/libs to be tested by setting these
dnl environment variables.)
dnl
dnl Also sets PTHREAD_CC to any special C compiler that is needed for
dnl multi-threaded programs (defaults to the value of CC otherwise).
dnl (This is necessary on AIX to use the special cc_r compiler alias.)
dnl
dnl If you are only building threads programs, you may wish to
dnl use these variables in your default LIBS, CFLAGS, and CC:
dnl
dnl        LIBS="$PTHREAD_LIBS $LIBS"
dnl        CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
dnl        CC="$PTHREAD_CC"
dnl
dnl In addition, if the PTHREAD_CREATE_JOINABLE thread-attribute
dnl constant has a nonstandard name, defines PTHREAD_CREATE_JOINABLE
dnl to that name (e.g. PTHREAD_CREATE_UNDETACHED on AIX).
dnl
dnl ACTION-IF-FOUND is a list of shell commands to run if a threads
dnl library is found, and ACTION-IF-NOT-FOUND is a list of commands
dnl to run it if it is not found.  If ACTION-IF-FOUND is not specified,
dnl the default action will define HAVE_PTHREAD.
dnl
dnl Please let the authors know if this macro fails on any platform,
dnl or if you have any other suggestions or comments.  This macro was
dnl based on work by SGJ on autoconf scripts for FFTW (www.fftw.org)
dnl (with help from M. Frigo), as well as ac_pthread and hb_pthread
dnl macros posted by AFC to the autoconf macro repository.  We are also
dnl grateful for the helpful feedback of numerous users.
dnl
dnl based upon
dnl @version $ Id : acx_pthread.m4,v 1.5 2002/05/02 09:05:37 simons Exp $
dnl
dnl @author Steven G. Johnson <stevenj@alum.mit.edu> and Alejandro Forero Cuervo <bachue@bachue.com>

AC_DEFUN([ACX_PTHREAD], [
AC_REQUIRE([AC_CANONICAL_HOST])
acx_pthread_ok=no

# We used to check for pthread.h first, but this fails if pthread.h
# requires special compiler flags (e.g. on True64 or Sequent).
# It gets checked for in the link test anyway.

# First of all, check if the user has set any of the PTHREAD_LIBS,
# etcetera environment variables, and if threads linking works using
# them:
if test x"$PTHREAD_LIBS$PTHREAD_CFLAGS" != x; then
        save_CFLAGS="$CFLAGS"
        CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
        save_LIBS="$LIBS"
        LIBS="$PTHREAD_LIBS $LIBS"
        AC_MSG_CHECKING([for pthread_join in LIBS=$PTHREAD_LIBS with CFLAGS=$PTHREAD_CFLAGS])
        AC_TRY_LINK_FUNC(pthread_join, acx_pthread_ok=yes)
        AC_MSG_RESULT($acx_pthread_ok)
        if test x"$acx_pthread_ok" = xno; then
                PTHREAD_LIBS=""
                PTHREAD_CFLAGS=""
        fi
        LIBS="$save_LIBS"
        CFLAGS="$save_CFLAGS"
fi

# We must check for the threads library under a number of different
# names; the ordering is very important because some systems
# (e.g. DEC) have both -lpthread and -lpthreads, where one of the
# libraries is broken (non-POSIX).

# Create a list of thread flags to try.  Items starting with a "-" are
# C compiler flags, and other items are library names, except for "none"
# which indicates that we try without any flags at all.

acx_pthread_flags="pthreads none -Kthread -kthread lthread -pthread -pthreads -mthreads pthread --thread-safe -mt"

# The ordering *is* (sometimes) important.  Some notes on the
# individual items follow:

# pthreads: AIX (must check this before -lpthread)
# none: in case threads are in libc; should be tried before -Kthread and
#       other compiler flags to prevent continual compiler warnings
# -Kthread: Sequent (threads in libc, but -Kthread needed for pthread.h)
# -kthread: FreeBSD kernel threads (preferred to -pthread since SMP-able)
# lthread: LinuxThreads port on FreeBSD (also preferred to -pthread)
# -pthread: Linux/gcc (kernel threads), BSD/gcc (userland threads)
# -pthreads: Solaris/gcc
# -mthreads: Mingw32/gcc, Lynx/gcc
# -mt: Sun Workshop C (may only link SunOS threads [-lthread], but it
#      doesn't hurt to check since this sometimes defines pthreads too;
#      also defines -D_REENTRANT)
# pthread: Linux, etcetera
# --thread-safe: KAI C++

case "${host_cpu}-${host_os}" in
        *solaris*)

        # On Solaris (at least, for some versions), libc contains stubbed
        # (non-functional) versions of the pthreads routines, so link-based
        # tests will erroneously succeed.  (We need to link with -pthread or
        # -lpthread.)  (The stubs are missing pthread_cleanup_push, or rather
        # a function called by this macro, so we could check for that, but
        # who knows whether they'll stub that too in a future libc.)  So,
        # we'll just look for -pthreads and -lpthread first:

        acx_pthread_flags="-pthread -pthreads pthread -mt $acx_pthread_flags"
        ;;
esac

if test x"$acx_pthread_ok" = xno; then
for flag in $acx_pthread_flags; do

        case $flag in
                none)
                AC_MSG_CHECKING([whether pthreads work without any flags])
                ;;

                -*)
                AC_MSG_CHECKING([whether pthreads work with $flag])
                PTHREAD_CFLAGS="$flag"
                ;;

                *)
                AC_MSG_CHECKING([for the pthreads library -l$flag])
                PTHREAD_LIBS="-l$flag"
                ;;
        esac

        save_LIBS="$LIBS"
        save_CFLAGS="$CFLAGS"
        LIBS="$PTHREAD_LIBS $LIBS"
        CFLAGS="$CFLAGS $PTHREAD_CFLAGS"

        # Check for various functions.  We must include pthread.h,
        # since some functions may be macros.  (On the Sequent, we
        # need a special flag -Kthread to make this header compile.)
        # We check for pthread_join because it is in -lpthread on IRIX
        # while pthread_create is in libc.  We check for pthread_attr_init
        # due to DEC craziness with -lpthreads.  We check for
        # pthread_cleanup_push because it is one of the few pthread
        # functions on Solaris that doesn't have a non-functional libc stub.
        # We try pthread_create on general principles.
        AC_TRY_LINK([#include <pthread.h>],
                    [pthread_t th; pthread_join(th, 0);
                     pthread_attr_init(0); pthread_cleanup_push(0, 0);
                     pthread_create(0,0,0,0); pthread_cleanup_pop(0); ],
                    [acx_pthread_ok=yes])

        LIBS="$save_LIBS"
        CFLAGS="$save_CFLAGS"

        AC_MSG_RESULT($acx_pthread_ok)
        if test "x$acx_pthread_ok" = xyes; then
                break;
        fi

        PTHREAD_LIBS=""
        PTHREAD_CFLAGS=""
done
fi

# Various other checks:
if test "x$acx_pthread_ok" = xyes; then
        save_LIBS="$LIBS"
        LIBS="$PTHREAD_LIBS $LIBS"
        save_CFLAGS="$CFLAGS"
        CFLAGS="$CFLAGS $PTHREAD_CFLAGS"

        # Detect AIX lossage: threads are created detached by default
        # and the JOINABLE attribute has a nonstandard name (UNDETACHED).
        AC_MSG_CHECKING([for joinable pthread attribute])
        AC_TRY_LINK([#include <pthread.h>],
                    [int attr=PTHREAD_CREATE_JOINABLE;],
                    ok=PTHREAD_CREATE_JOINABLE, ok=unknown)
        if test x"$ok" = xunknown; then
                AC_TRY_LINK([#include <pthread.h>],
                            [int attr=PTHREAD_CREATE_UNDETACHED;],
                            ok=PTHREAD_CREATE_UNDETACHED, ok=unknown)
        fi
        if test x"$ok" != xPTHREAD_CREATE_JOINABLE; then
                AC_DEFINE(PTHREAD_CREATE_JOINABLE, $ok,
                          [Define to the necessary symbol if this constant
                           uses a non-standard name on your system.])
        fi
        AC_MSG_RESULT(${ok})
        if test x"$ok" = xunknown; then
                AC_MSG_WARN([we do not know how to create joinable pthreads])
        fi

        AC_MSG_CHECKING([if more special flags are required for pthreads])
        flag=no
        case "${host_cpu}-${host_os}" in
                *-aix* | *-freebsd*)     flag="-D_THREAD_SAFE";;
                *solaris* | alpha*-osf*) flag="-D_REENTRANT";;
        esac
        AC_MSG_RESULT(${flag})
        if test "x$flag" != xno; then
                PTHREAD_CFLAGS="$flag $PTHREAD_CFLAGS"
        fi

        LIBS="$save_LIBS"
        CFLAGS="$save_CFLAGS"

        # More AIX lossage: must compile with cc_r
        AC_CHECK_PROG(PTHREAD_CC, cc_r, cc_r, ${CC})
else
        PTHREAD_CC="$CC"
fi

AC_SUBST(PTHREAD_LIBS)
AC_SUBST(PTHREAD_CFLAGS)
AC_SUBST(PTHREAD_CC)

# Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND:
if test x"$acx_pthread_ok" = xyes; then
        ifelse([$1],,AC_DEFINE(HAVE_PTHREAD,1,[Define if you have POSIX threads libraries and header files.]),[$1])
        :
else
        acx_pthread_ok=no
        $2
fi

])dnl ACX_PTHREAD

dnl end of acinclude.m4