1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85
|
#ident "$Id: faxhng.c,v 4.2 1997/12/17 21:52:00 gert Exp $ Copyright (c) 1993 Gert Doering"
/* faxhng.c - mainly table, translate +FHNG:xxx codes to english text
*/
#include "mgetty.h"
struct t_fhng_table { int i ; char * string; } fhng_table[] = {
{ -6, "TIMEOUT waiting for modem response (int.)" },
{ -5, "Unexpected hangup / read() error / write() error (int.)" },
{ -4, "Unexpected 'ERROR' or 'NO CARRIER' response (int.)" },
{ -3, "Modem responded 'NO DIALTONE' (int.)" },
{ -2, "Modem responded 'BUSY' (int.)" },
{ -1, "Invalid +FPTS:xxx code" },
/* { 0-9, "CALL PLACEMENT AND TERMINATION" }, */
{ 0, "Normal and proper end of connection" },
{ 1, "Ring Detect without successful handshake" },
{ 2, "Call aborted, from +FK or AN" },
{ 3, "No Loop Current" },
{ 4, "Ringback detected, no answer (timeout)" },
{ 5, "Ringback detected, answer without CED" },
/* { 10-19, "TRANSMIT PHASE A & MISCELLANEOUS ERRORS" }, */
{ 10, "Unspecified Phase A error" },
{ 11, "No Answer (T.30 T1 timeout)" },
/* { 20-39, "TRANSMIT PHASE B HANGUP CODES" }, */
{ 20, "Unspecified Transmit Phase B error" },
{ 21, "Remote cannot receive or send" },
{ 22, "COMREC error in transmit Phase B" },
{ 23, "COMREC invalid command received" },
{ 24, "RSPEC error" },
{ 25, "DCS sent three times without response" },
{ 26, "DIS/DTC received 3 times; DCS not recognized" },
{ 27, "Failure to train at 2400 bps or +FMINSP value" },
{ 28, "RSPREC invalid response received" },
/* { 40-49, "TRANSMIT PHASE C HANGUP CODES" }, */
{ 40, "Unspecified Transmit Phase C error" },
{ 41, "Unspecified Image format error" },
{ 42, "Image conversion error" },
{ 43, "DTE to DCE data underflow" },
{ 44, "Unrecognized Transparent data command" },
{ 45, "Image error, line length wrong" },
{ 46, "Image error, page length wrong" },
{ 47, "Image error, wrong compression code" },
/* { 50-69, "TRANSMIT PHASE D HANGUP CODES" }, */
{ 50, "Unspecified Transmit Phase D error" },
{ 51, "RSPREC error" },
{ 52, "No response to MPS repeated 3 times" },
{ 53, "Invalid response to MPS" },
{ 54, "No response to EOP repeated 3 times" },
{ 55, "Invalid response to EOM" },
{ 56, "No response to EOM repeated 3 times" },
{ 57, "Invalid response to EOM" },
{ 58, "Unable to continue after PIN or PIP" },
/* { 70-89, "RECEIVE PHASE B HANGUP CODES" }, */
{ 70, "Unspecified Receive Phase B error" },
{ 71, "RSPREC error" },
{ 72, "COMREC error" },
{ 73, "T.30 T2 timeout, expected page not received" },
{ 74, "T.30 T1 timeout after EOM received" },
/* { 90-99, "RECEIVE PHASE C HANGUP CODES" }, */
{ 90, "Unspecified Receive Phase C error" },
{ 91, "Missing EOL after 5 seconds" },
{ 92, "Bad CRC or frame (ECM mode)" },
{ 93, "DCE to DTE buffer overflow" },
{ 94, "Bad CRC or frame (ECM or BFT modes)" },
/* { 100-119, "RECEIVE PHASE D HANGUP CODES" }, */
{ 100, "Unspecified Receive Phase D errors" },
{ 101, "RSPREC invalid response received" },
{ 102, "COMREC invalid response received" },
{ 103, "Unable to continue after PIN or PIP" }
/* { 120-255, "RESERVED CODES" }, */
};
char * fax_strerror _P1( (fhng), int fhng )
{
int i;
for ( i=0; i < sizeof( fhng_table ) / sizeof( fhng_table[0] ); i++ )
{
if ( fhng_table[i].i == fhng )
{
return fhng_table[i].string;
}
}
return "unknown +FHNG error code";
}
|