1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
|
# This is an example on how to access accelerometer on
# PyBoard directly using I2C bus. As such, it's more
# intended to be an I2C example, rather than accelerometer
# example. For the latter, using pyb.Accel class is
# much easier.
from machine import Pin
from machine import I2C
import time
# Accelerometer needs to be powered on first. Even
# though signal is called "AVDD", and there's separate
# "DVDD", without AVDD, it won't event talk on I2C bus.
accel_pwr = Pin("MMA_AVDD")
accel_pwr.value(1)
i2c = I2C(1, baudrate=100000)
addrs = i2c.scan()
print("Scanning devices:", [hex(x) for x in addrs])
if 0x4C not in addrs:
print("Accelerometer is not detected")
ACCEL_ADDR = 0x4C
ACCEL_AXIS_X_REG = 0
ACCEL_MODE_REG = 7
# Now activate measurements
i2c.mem_write(b"\x01", ACCEL_ADDR, ACCEL_MODE_REG)
print("Try to move accelerometer and watch the values")
while True:
val = i2c.mem_read(1, ACCEL_ADDR, ACCEL_AXIS_X_REG)
print(val[0])
time.sleep(1)
|
