1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
|
.\"
.TH "y4mcolorbars" "1" "28 April 2004" "MJPEG Tools Team" "MJPEG tools manual"
.SH "NAME"
y4mcolorbars \- Create a YUV4MPEG2 stream containing a colorbar test pattern
.SH "SYNOPSIS"
.B y4mcolorbars
.RI [ options ]
.SH "DESCRIPTION"
\fBy4mcolorbars\fP creates a YUV4MPEG2 stream consisting entirely of frames
containing a colorbar test pattern. The pattern attempts to reproduce the
standard SMPTE EG-1-1990 colorbar test signal as faithfully as possible,
given the constraints of the Y'CbCr colorspace.
Output is to stdout to facilitate piping to other MJPEG tools.
.SH "OPTIONS"
\fBy4mcolorbars\fP accepts the following options:
.TP 5
.BI \-n " num"
Output a total of 'num' output frames. [default: 1]
.TP 5
.BI \-F " n:d"
Set framerate encoded in output stream, as an exact integer ratio.
Common rates are:
24000:1001 - NTSC 3:2 pulldown converted film
24:1 - native film
25:1 - PAL/SECAM
30000:1001 - NTSC video [default]
50:1 - PAL field rate
60000:1001 - NTSC field rate
.TP 5
.BI \-W " w"
Set frame width. [default: 720]
.TP 5
.BI \-H " h"
Set frame height. [default: 480]
.TP 5
.BI \-A " n:d"
Set pixel aspect ratio encoded in output stream, as an exact integer ratio.
Common ratios are:
1:1 - square pixels (e.g. computer graphics)
10:11 - CCIR-601 NTSC [default]
59:54 - CCIR-601 PAL
.TP 5
.BI \-I " x"
Set interlacing mode, used to interpret the PPM image(s), and also encoded
in output stream.
p - progressive, non-interlaced [default]
t - top/upper-field-first interlaced
b - bottom/lower-field-first interlaced
.TP 5
.BI \-Q " n"
Data to place in the "-I/+Q" patches in the bottom row of the pattern:
0 - -I and +Q at 20% (20IRE) [default]
1 - -I and +Q at 50% (50IRE)
2 - +Cb and +Cr at 100%
.TP 5
.BI \-S " mode"
Set chroma subsampling mode.
444 - 4:4:4 (no subsampling) [default]
420jpeg - 4:2:0 JPEG/MPEG-1, interstitial cositing
420mpeg2 - 4:2:0 MPEG-2, horizontal cositing
The supported subsampled modes use a lousy subsampling filter;
better results will be achieved by passing the default 4:4:4 output to
a scaler which supports subsampling, such as \fBy4mscaler\fP(1).
.TP 5
.BI \-v " [0,1,2]"
Set verbosity level.
0 - warnings and errors only.
1 - add informative messages, too. [default]
2 - add chatty debugging message, too.
.SH "EXAMPLES"
.hw y4mcolorbars yuvplay tgatoppm
To create and display 200 frames of colorbars corresponding to a
top-field-first interlaced 4:3 NTSC source:
.RS 5
y4mcolorbars -n 200 -It -S 420jpeg | yuvplay
.RE
To create and display 200 frames of colorbars corresponding to a
bottom-field-first interlaced 4:3 PAL source:
.RS 5
y4mcolorbars -n 200 -H 576 -F 25:1 -A 59:54 -Ib | yuvplay
.RE
.SH "BUGS"
First, it's not clear to the author (who hasn't actually ever seen the SMPTE
EG-1-1990 document itself) what the absolute excursion of the -I and +Q regions
is supposed to be; however, the phase is correct, and that should be the
critical feature. Second, the PLUGE bars, of -4 and +4 IRE, can never be
precisely synthesized --- the Y' digital space maps [16,235] over the
full luma excursion, but the full luma excursion in analog space depends
on whether or not 7.5 IRE NTSC setup is being used by whatever device
eventually produces the analog output. However, the difference
is within 1-bit of Y' accuracy anyway.
.SH "AUTHOR"
This man page was written by Matt Marjanovic.
.br
If you have questions, remarks, problems or you just want to contact
the developers, the main mailing list for the MJPEG\-tools is:
\fImjpeg\-users@lists.sourceforge.net\fP
.TP
For more info, see our website at
.I http://mjpeg.sourceforge.net
.SH "SEE ALSO"
.BR mjpegtools (1),
.BR mpeg2enc (1),
.BR y4mscaler (1),
.BR yuv2lav (1),
.BR yuvplay (1)
|
