1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
|
You can use the following boot parameters at the "boot: " prompt.
If you use hex numbers you have to use the 0x prefix (e.g. 0x300)
protect I/O port regions reserve=iobase,extent[,...]
Adaptec 151x, 152x aha152x=iobase[,irq[,scsi-id[,reconnect]]]
Adaptec 1542 aha1542=iobase[,buson,busoff[,dmaspeed]]
Adaptec 274x, 284x aic7xxx=extended,noreset (enabled if non-zero)
BusLogic SCSI Hosts buslogic=iobase
Future Domain TMC-8xx/950 tmc8xx=mem_base,irq
Pro Audio Spectrum pas16=iobase,irq
Seagate ST-0x st0x=mem_base,irq
Trantor T128 t128=mem_base,irq
Aztech CD-ROM aztcd=iobase[,magic_number]
CDU-31A/CDU-33A Sony CD-ROM cdu31a=iobase,[irq[,is_pas_card]]
CDU-535 Sony CD-ROM sonycd535=iobase[,irq]
GoldStar CD-ROM gscd=iobase
Mitsumi Standard CD-ROM mcd=iobase,[irq[,wait_value]]
Optics Storage CD-ROM optcd=iobase
Phillips CM206 CD-ROM cm206=[iobase][,irq]
Sanyo CD-ROM sjcd=iobase[,irq[,dma_channel]]
SoundBlaster Pro CD-ROM sbpcd=iobase,type
ATAPI/IDE CD-ROM hd{a,b,c,d}=cdrom
|
