/* MSPDebug - debugging tool for MSP430 MCUs
 * Copyright (C) 2009, 2010 Daniel Beer
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 */

#ifndef DEVICE_H_
#define DEVICE_H_

#include <stdint.h>
#include "util.h"
#include "powerbuf.h"
#include "chipinfo.h"
#include "bytes.h"

struct device;
typedef struct device *device_t;

typedef enum {
	DEVICE_CTL_RESET,
	DEVICE_CTL_RUN,
	DEVICE_CTL_HALT,
	DEVICE_CTL_STEP,
	DEVICE_CTL_SECURE
} device_ctl_t;

typedef enum {
	DEVICE_STATUS_HALTED,
	DEVICE_STATUS_RUNNING,
	DEVICE_STATUS_INTR,
	DEVICE_STATUS_ERROR
} device_status_t;

typedef enum {
	DEVICE_ERASE_ALL,
	DEVICE_ERASE_MAIN,
	DEVICE_ERASE_SEGMENT
} device_erase_type_t;

#define DEVICE_NUM_REGS		16
#define DEVICE_MAX_BREAKPOINTS  32

#define DEVICE_BP_ENABLED       0x01
#define DEVICE_BP_DIRTY         0x02

typedef enum {
	DEVICE_BPTYPE_BREAK,
	DEVICE_BPTYPE_WATCH,
	DEVICE_BPTYPE_READ,
	DEVICE_BPTYPE_WRITE
} device_bptype_t;

struct device_breakpoint {
	device_bptype_t		type;
	address_t		addr;
	int			flags;
};

#define DEVICE_FLAG_JTAG	0x01 /* default is SBW */
#define DEVICE_FLAG_LONG_PW	0x02
#define DEVICE_FLAG_TTY		0x04 /* default is USB */
#define DEVICE_FLAG_FORCE_RESET	0x08
#define DEVICE_FLAG_DO_FWUPDATE 0x10
#define DEVICE_FLAG_SKIP_CLOSE	0x20

struct device_args {
	int			flags;
	int			vcc_mv;
	const char		*path;
	const char		*forced_chip_id;
	const char		*requested_serial;
	const char		*require_fwupdate;
	const char		*bsl_entry_seq;
	int			bsl_gpio_used;
	int			bsl_gpio_rts;
	int			bsl_gpio_dtr;
};

struct device_class {
	const char		*name;
	const char		*help;

	/* Create a new device */
	device_t (*open)(const struct device_args *args);

	/* Close the connection to the device and destroy the driver object */
	void (*destroy)(device_t dev);

	/* Read/write memory */
	int (*readmem)(device_t dev, address_t addr,
		       uint8_t *mem, address_t len);
	int (*writemem)(device_t dev, address_t addr,
			const uint8_t *mem, address_t len);

	/* Erase memory */
	int (*erase)(device_t dev, device_erase_type_t type,
		     address_t address);

	/* Read/write registers */
	int (*getregs)(device_t dev, address_t *regs);
	int (*setregs)(device_t dev, const address_t *regs);

	/* CPU control */
	int (*ctl)(device_t dev, device_ctl_t op);

	/* Wait a little while for the CPU to change state */
	device_status_t (*poll)(device_t dev);

	/* Get the configuration fuse values */
	int (*getconfigfuses)(device_t dev);
};

struct device {
	const struct device_class	*type;

	uint8_t				dev_id[3];

	/* Breakpoint table. This should not be modified directly.
	 * Instead, you should use the device_setbrk() helper function. This
	 * will set the appropriate flags and ensure that the breakpoint is
	 * reloaded before the next run.
	 */
	int max_breakpoints;
	struct device_breakpoint breakpoints[DEVICE_MAX_BREAKPOINTS];

	/* Power sample buffer, if power profiling is supported by this
	 * device.
	 */
	powerbuf_t power_buf;

	/* Chip information data.
	 */
	const struct chipinfo *chip;
	int need_probe;
};

/* Probe the device memory and extract ID bytes. This should be called
 * after the device structure is ready.
 */
int device_probe_id(device_t dev, const char *force_id);

/* Determine, from the device ID bytes, whether this chip is an FRAM or
 * flash-based device.
 */
int device_is_fram(device_t dev);

/* Set or clear a breakpoint. The index of the modified entry is
 * returned, or -1 if no free entries were available. The modified
 * entry is flagged so that it will be reloaded on the next run.
 *
 * If which is specified, a particular breakpoint slot is
 * modified. Otherwise, if which < 0, breakpoint slots are selected
 * automatically.
 */
int device_setbrk(device_t dev, int which, int enabled, address_t address,
		  device_bptype_t type);

extern device_t device_default;

/* Helper macros for operating on the default device */
#define device_destroy() device_default->type->destroy(device_default)
#define device_readmem(addr, mem, len) \
	device_default->type->readmem(device_default, addr, mem, len)
#define device_writemem(addr, mem, len) \
	device_default->type->writemem(device_default, addr, mem, len)
#define device_getregs(regs) \
	device_default->type->getregs(device_default, regs)
#define device_setregs(regs) \
	device_default->type->setregs(device_default, regs)
#define device_ctl(op) \
	device_default->type->ctl(device_default, op)
#define device_poll() \
	device_default->type->poll(device_default)

int device_erase(device_erase_type_t et, address_t addr);

address_t check_range(const struct chipinfo *chip,
			     address_t addr, address_t size,
			     const struct chipinfo_memory **m_ret);

int readmem(device_t dev, address_t addr,
		uint8_t *mem, address_t len,
		int (*read_words)(device_t dev,
			const struct chipinfo_memory *m,
			address_t addr, address_t len,
			uint8_t *data)
		);

int writemem(device_t dev, address_t addr,
		const uint8_t *mem, address_t len,
		int (*write_words)(device_t dev,
			const struct chipinfo_memory *m,
			address_t addr, address_t len,
			const uint8_t *data),
		int (*read_words)(device_t dev,
			const struct chipinfo_memory *m,
			address_t addr, address_t len,
			uint8_t *data)
		);

#endif