// Copyright 2021 DeepMind Technologies Limited
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

#include <chrono>
#include <cstdio>
#include <cstring>
#include <string>
#include <thread>

#include <mujoco/mujoco.h>


// maximum number of threads
const int maxthread = 512;

// model and per-thread data
mjModel* m = NULL;
mjData* d[maxthread];


// per-thread statistics
int contacts[maxthread];
int constraints[maxthread];
double simtime[maxthread];


// timer
std::chrono::system_clock::time_point tm_start;
mjtNum gettm(void) {
  std::chrono::duration<double> elapsed = std::chrono::system_clock::now() - tm_start;
  return elapsed.count();
}


// deallocate and print message
int finish(const char* msg = NULL, mjModel* m = NULL) {
  // deallocate model
  if (m) {
    mj_deleteModel(m);
  }

  // print message
  if (msg) {
    std::printf("%s\n", msg);
  }

  return 0;
}


// thread function
void simulate(int id, int nstep, mjtNum ctrlnoise) {
  // clear statistics
  contacts[id] = 0;
  constraints[id] = 0;

  // run and time
  double start = gettm();
  for (int i=0; i<nstep; i++) {
    // inject pseuso-random control noise
    if (ctrlnoise)
      for (int j=0; j<m->nu; j++) {
        mjtNum center = 0.0;
        mjtNum radius = 1.0;
        mjtNum* range = m->actuator_ctrlrange + 2*j;
        if (m->actuator_ctrllimited[j]) {
          center = (range[1] + range[0]) / 2;
          radius = (range[1] - range[0]) / 2;
        }
        radius *= ctrlnoise;
        d[id]->ctrl[j] = center + radius * (2*mju_Halton(i, j+2) - 1);
      }

    // advance simulation
    mj_step(m, d[id]);

    // accumulate statistics
    contacts[id] += d[id]->ncon;
    constraints[id] += d[id]->nefc;
  }
  simtime[id] = gettm() - start;
}


// main function
int main(int argc, char** argv) {

  // print help if arguments are missing
  if (argc<2 || argc>6) {
    return finish("\n Usage:  testspeed modelfile [nstep nthread ctrlnoise profile]\n");
  }

  // read arguments
  int nstep = 10000, nthread = 0, profile = 0;
  // inject small noise by default, to avoid fixed contact state
  mjtNum ctrlnoise = 0.01;
  if (argc>2)
    if (std::sscanf(argv[2], "%d", &nstep)!=1 || nstep<=0) {
      return finish("Invalid nstep argument");
    }
  if (argc>3)
    if (std::sscanf(argv[3], "%d", &nthread)!=1) {
      return finish("Invalid nthread argument");
    }
  if (argc>4)
    if (std::sscanf(argv[4], "%lf", &ctrlnoise)!=1) {
      return finish("Invalid ctrlnoise argument");
    }
  if (argc>5)
    if (std::sscanf(argv[5], "%d", &profile)!=1) {
      return finish("Invalid profile argument");
    }

  // clamp ctrlnoise to [0.0, 1.0]
  ctrlnoise = mjMAX(0.0, mjMIN(ctrlnoise, 1.0));

  // clamp nthread to [1, maxthread]
  nthread = mjMAX(1, mjMIN(maxthread, nthread));

  // get filename, determine file type
  std::string filename(argv[1]);
  bool binary = (filename.find(".mjb")!=std::string::npos);

  // load model
  char error[1000] = "Could not load binary model";
  if (binary) {
    m = mj_loadModel(argv[1], 0);
  } else {
    m = mj_loadXML(argv[1], 0, error, 1000);
  }
  if (!m) {
    return finish(error);
  }

  // make per-thread data
  int testkey = mj_name2id(m, mjOBJ_KEY, "test");
  for (int id=0; id<nthread; id++) {
    d[id] = mj_makeData(m);
    if (!d[id]) {
      return finish("Could not allocate mjData", m);
    }

    // init to keyframe "test" if present
    if (testkey>=0) {
      mju_copy(d[id]->qpos, m->key_qpos + testkey*m->nq, m->nq);
      mju_copy(d[id]->qvel, m->key_qvel + testkey*m->nv, m->nv);
      mju_copy(d[id]->act,  m->key_act  + testkey*m->na, m->na);
    }
  }

  // install timer callback for profiling if requested
  tm_start = std::chrono::system_clock::now();
  if (profile) {
    mjcb_time = gettm;
  }

  // print start
  if (nthread>1) {
    std::printf("\nRunning %d steps per thread at dt = %g ...\n\n", nstep, m->opt.timestep);
  } else {
    std::printf("\nRunning %d steps at dt = %g ...\n\n", nstep, m->opt.timestep);
  }

  // run simulation, record total time
  std::thread th[maxthread];
  double starttime = gettm();
  for (int id=0; id<nthread; id++) {
    th[id] = std::thread(simulate, id, nstep, ctrlnoise);
  }
  for (int id=0; id<nthread; id++) {
    th[id].join();
  }
  double tottime = gettm() - starttime;

  // all-thread summary
  if (nthread>1) {
    std::printf("Summary for all %d threads\n\n", nthread);
    std::printf(" Total simulation time  : %.2f s\n", tottime);
    std::printf(" Total steps per second : %.0f\n", nthread*nstep/tottime);
    std::printf(" Total realtime factor  : %.2f x\n", nthread*nstep*m->opt.timestep/tottime);
    std::printf(" Total time per step    : %.4f ms\n\n", 1000*tottime/(nthread*nstep));

    std::printf("Details for thread 0\n\n");
  }

  // details for thread 0
  std::printf(" Simulation time      : %.2f s\n", simtime[0]);
  std::printf(" Steps per second     : %.0f\n", nstep/simtime[0]);
  std::printf(" Realtime factor      : %.2f x\n", nstep*m->opt.timestep/simtime[0]);
  std::printf(" Time per step        : %.4f ms\n\n", 1000*simtime[0]/nstep);
  std::printf(" Contacts per step    : %.2f\n", static_cast<float>(contacts[0])/nstep);
  std::printf(" Constraints per step : %.2f\n", static_cast<float>(constraints[0])/nstep);
  std::printf(" Degrees of freedom   : %d\n\n", m->nv);

  // profiler results for thread 0
  if (profile) {
    printf(" Profiler phase (ms per step)\n");
    mjtNum tstep = d[0]->timer[mjTIMER_STEP].duration/d[0]->timer[mjTIMER_STEP].number;
    for (int i=0; i<mjNTIMER; i++)
      if (d[0]->timer[i].number>0) {
        mjtNum istep = d[0]->timer[i].duration/d[0]->timer[i].number;
        std::printf(" %16s : %.5f  (%6.2f %%)\n", mjTIMERSTRING[i],
                    1000*istep, 100*istep/tstep);
      }
  }

  // free per-thread data
  for (int id=0; id<nthread; id++) {
    mj_deleteData(d[id]);
  }

  // finalize
  return finish();
}