#!/usr/bin/perl -w 
# nagios: -epn
############################## check_snmp_mem ##############
my $VERSION = "2.1.0";

# Date : 17 October 2007
# Author  : Patrick Proy (nagios at proy.org)
# Help : http://nagios.manubulon.com/
# License : GPL - http://www.fsf.org/licenses/gpl.txt
# Contrib : Jan Jungmann, Patrick Griffin
# TODO :
#################################################################
#
# Help : ./check_snmp_mem.pl -h
#

use strict;
use Net::SNMP;
use Getopt::Long;

# Icinga specific
my $TIMEOUT = 15;
my %ERRORS = ('OK' => 0, 'WARNING' => 1, 'CRITICAL' => 2, 'UNKNOWN' => 3, 'DEPENDENT' => 4);

# SNMP Datas

# Net-snmp memory

my $nets_ram_free   = "1.3.6.1.4.1.2021.4.6.0";     # Real memory free
my $nets_ram_total  = "1.3.6.1.4.1.2021.4.5.0";     # Real memory total
my $nets_ram_buffer = "1.3.6.1.4.1.2021.4.14.0";    # Real memory buffered
my $nets_ram_cache  = "1.3.6.1.4.1.2021.4.15.0";    # Real memory cached
my $nets_swap_free  = "1.3.6.1.4.1.2021.4.4.0";     # swap memory free
my $nets_swap_total = "1.3.6.1.4.1.2021.4.3.0";     # Swap memory total
my @nets_oids = ($nets_ram_free, $nets_ram_total, $nets_swap_free, $nets_swap_total, $nets_ram_cache, $nets_ram_buffer);

# Cisco

my $cisco_mem_pool = "1.3.6.1.4.1.9.9.48.1.1.1";      # Cisco memory pool
my $cisco_index    = "1.3.6.1.4.1.9.9.48.1.1.1.2";    # memory pool name and index
my $cisco_valid    = "1.3.6.1.4.1.9.9.48.1.1.1.4";    # Valid memory if 1
my $cisco_used     = "1.3.6.1.4.1.9.9.48.1.1.1.5";    # Used memory
my $cisco_free     = "1.3.6.1.4.1.9.9.48.1.1.1.6";    # Free memory

# .1 : type, .2 : name, .3 : alternate, .4 : valid, .5 : used, .6 : free, .7 : max free

# HP Procurve

my $hp_mem_pool     = "1.3.6.1.4.1.11.2.14.11.5.1.1.2.2.1.1";      # HP memory pool
my $hp_mem_index    = "1.3.6.1.4.1.11.2.14.11.5.1.1.2.2.1.1.1";    # memory slot index
my $hp_mem_total    = "1.3.6.1.4.1.11.2.14.11.5.1.1.2.2.1.1.5";    # Total Bytes
my $hp_mem_free     = "1.3.6.1.4.1.11.2.14.11.5.1.1.2.2.1.1.6";    # Free Bytes
my $hp_mem_free_seg = "1.3.6.1.4.1.11.2.14.11.5.1.1.2.2.1.1.3";    # Free segments

# AS/400

# Windows NT/2K/(XP?)

# check_snmp_storage.pl -C <community> -H <hostIP> -m "^Virtual Memory$"  -w <warn %> -c <crit %>

# Globals

my $o_host      = undef;         # hostname
my $o_community = undef;         # community
my $o_port      = 161;           # port
my $o_domain    = 'udp/ipv4';    # Default to UDP over IPv4
my $o_help      = undef;         # wan't some help ?
my $o_verb      = undef;         # verbose mode
my $o_version   = undef;         # print version
my $o_netsnmp   = 1;             # Check with netsnmp (default)
my $o_cisco     = undef;         # Check cisco router mem
my $o_hp        = undef;         # Check hp procurve mem
my $o_warn      = undef;         # warning level option
my $o_warnR     = undef;         # warning level for Real memory
my $o_warnS     = undef;         # warning levels for swap
my $o_crit      = undef;         # Critical level option
my $o_critR     = undef;         # critical level for Real memory
my $o_critS     = undef;         # critical level for swap
my $o_perf      = undef;         # Performance data option
my $o_cache     = undef;         # Include cached memory as used memory
my $o_buffer    = undef;         # Exclude buffered memory as used memory
my $o_timeout   = undef;         # Timeout (Default 5)
my $o_version2  = undef;         # use snmp v2c

# SNMPv3 specific
my $o_login     = undef;         # Login for snmpv3
my $o_passwd    = undef;         # Pass for snmpv3
my $v3protocols = undef;         # V3 protocol list.
my $o_authproto = 'md5';         # Auth protocol
my $o_privproto = 'des';         # Priv protocol
my $o_privpass  = undef;         # priv password

# functions

sub p_version { print "check_snmp_mem version : $VERSION\n"; }

sub print_usage {
    print
"Usage: $0 [-v] -H <host> -C <snmp_community> [-2] | (-l login -x passwd [-X pass -L <authp>,<privp>])  [-p <port>] [-P <protocol>] -w <warn level> -c <crit level> [-I|-N|-E] [-f[f]] [-m -b] [-t <timeout>] [-V]\n";
}

sub isnnum {                     # Return true if arg is not a number
    my $num = shift;
    if ($num =~ /^(\d+\.?\d*)|(^\.\d+)$/) { return 0; }
    return 1;
}

sub round ($$) {
    sprintf "%.$_[1]f", $_[0];
}

sub help {
    print "\nSNMP Memory Monitor for Icinga/Nagios/Naemon/Shinken, Version ", $VERSION, "\n";
    print "GPL license, (c)2004-2007 Patrick Proy\n\n";
    print_usage();
    print <<EOT;
-v, --verbose
   print extra debugging information
-h, --help
   print this help message
-H, --hostname=HOST
   name or IP address of host to check
-C, --community=COMMUNITY NAME
   community name for the host's SNMP agent (implies SNMP v1 or v2c with option)
-2, --v2c
   Use snmp v2c
-l, --login=LOGIN ; -x, --passwd=PASSWD
   Login and auth password for snmpv3 authentication 
   If no priv password exists, implies AuthNoPriv 
-X, --privpass=PASSWD
   Priv password for snmpv3 (AuthPriv protocol)
-L, --protocols=<authproto>,<privproto>
   <authproto> : Authentication protocol (md5|sha : default md5)
   <privproto> : Priv protocole (des|aes : default des) 
-p, --port=PORT
   SNMP port (Default 161)
-P, --protocol=PROTOCOL
   Network protocol to be used
   ['udp/ipv4'] : UDP over IPv4
    'udp/ipv6'  : UDP over IPv6
    'tcp/ipv4'  : TCP over IPv4
    'tcp/ipv6'  : TCP over IPv6
-w, --warn=INTEGER | INT,INT
   warning level for memory in percent (0 for no checks) 
     Default (-N switch) : comma separated level for Real Memory and Swap 
     -I switch : warning level
-c, --crit=INTEGER | INT,INT
   critical level for memory in percent (0 for no checks)
     Default (-N switch) : comma separated level for Real Memory and Swap 
     -I switch : critical level
-N, --netsnmp (default)
   check linux memory & swap provided by Net SNMP 
-m, --memcache
   include cached memory in used memory (only with Net-SNMP)
-b, --membuffer
   exclude buffered memory in used memory (only with Net-SNMP)
-I, --cisco
   check cisco memory (sum of all memory pools)
-E, --hp
   check HP Procurve memory
-f, --perfdata
   Performance data output
-t, --timeout=INTEGER
   timeout for SNMP in seconds (Default: 5)
-V, --version
   prints version number
EOT
}

# For verbose output
sub verb { my $t = shift; print $t, "\n" if defined($o_verb); }

# Get the alarm signal (just in case snmp timout screws up)
$SIG{'ALRM'} = sub {
    print("ERROR: Alarm signal (Nagios time-out)\n");
    exit $ERRORS{"UNKNOWN"};
};

sub check_options {
    Getopt::Long::Configure("bundling");
    GetOptions(
        'v'           => \$o_verb,
        'verbose'     => \$o_verb,
        'h'           => \$o_help,
        'help'        => \$o_help,
        'H:s'         => \$o_host,
        'hostname:s'  => \$o_host,
        'p:i'         => \$o_port,
        'port:i'      => \$o_port,
        'P:s'         => \$o_domain,
        'protocol:s'  => \$o_domain,
        'C:s'         => \$o_community,
        'community:s' => \$o_community,
        'l:s'         => \$o_login,
        'login:s'     => \$o_login,
        'x:s'         => \$o_passwd,
        'passwd:s'    => \$o_passwd,
        'X:s'         => \$o_privpass,
        'privpass:s'  => \$o_privpass,
        'L:s'         => \$v3protocols,
        'protocols:s' => \$v3protocols,
        't:i'         => \$o_timeout,
        'timeout:i'   => \$o_timeout,
        'V'           => \$o_version,
        'version'     => \$o_version,
        'I'           => \$o_cisco,
        'cisco'       => \$o_cisco,
        'N'           => \$o_netsnmp,
        'netsnmp'     => \$o_netsnmp,
        'E'           => \$o_hp,
        'hp'          => \$o_hp,
        '2'           => \$o_version2,
        'v2c'         => \$o_version2,
        'c:s'         => \$o_crit,
        'critical:s'  => \$o_crit,
        'w:s'         => \$o_warn,
        'warn:s'      => \$o_warn,
        'm'           => \$o_cache,
        'memcache'    => \$o_cache,
        'b'           => \$o_buffer,
        'membuffer'   => \$o_buffer,
        'f+'          => \$o_perf,
        'perfdata+'   => \$o_perf
    );
    if (defined($o_help))    { help();      exit $ERRORS{"UNKNOWN"} }
    if (defined($o_version)) { p_version(); exit $ERRORS{"UNKNOWN"} }
    if (!defined($o_host))    # check host and filter
    {
        print "No host defined!\n";
        print_usage();
        exit $ERRORS{"UNKNOWN"};
    }

    # check snmp information
    if (!defined($o_community) && (!defined($o_login) || !defined($o_passwd))) {
        print "Put snmp login info!\n";
        print_usage();
        exit $ERRORS{"UNKNOWN"};
    }
    if ((defined($o_login) || defined($o_passwd)) && (defined($o_community) || defined($o_version2))) {
        print "Can't mix snmp v1,2c,3 protocols!\n";
        print_usage();
        exit $ERRORS{"UNKNOWN"};
    }
    if (defined($v3protocols)) {
        if (!defined($o_login)) {
            print "Put snmp V3 login info with protocols!\n";
            print_usage();
            exit $ERRORS{"UNKNOWN"};
        }
        my @v3proto = split(/,/, $v3protocols);
        if ((defined($v3proto[0])) && ($v3proto[0] ne "")) { $o_authproto = $v3proto[0]; }    # Auth protocol
        if (defined($v3proto[1])) { $o_privproto = $v3proto[1]; }                             # Priv  protocol
        if ((defined($v3proto[1])) && (!defined($o_privpass))) {
            print "Put snmp V3 priv login info with priv protocols!\n";
            print_usage();
            exit $ERRORS{"UNKNOWN"};
        }
    }
    if (defined($o_timeout) && (isnnum($o_timeout) || ($o_timeout < 2) || ($o_timeout > 60))) {
        print "Timeout must be >1 and <60 !\n";
        print_usage();
        exit $ERRORS{"UNKNOWN"};
    }
    if (!defined($o_timeout)) { $o_timeout = 5; }

    #Check Warning and crit are present
    if (!defined($o_warn) || !defined($o_crit)) {
        print "Put warning and critical values!\n";
        print_usage();
        exit $ERRORS{"UNKNOWN"};
    }

    # Get rid of % sign
    $o_warn =~ s/\%//g;
    $o_crit =~ s/\%//g;

    # if -N or -E switch , undef $o_netsnmp
    if (defined($o_cisco) || defined($o_hp)) {
        $o_netsnmp = undef;
        if (isnnum($o_warn) || isnnum($o_crit)) {
            print "Numeric value for warning or critical !\n";
            print_usage();
            exit $ERRORS{"UNKNOWN"};
        }
        if (($o_crit != 0) && ($o_warn > $o_crit)) {
            print "warning <= critical ! \n";
            print_usage();
            exit $ERRORS{"UNKNOWN"};
        }
    }
    if (defined($o_netsnmp)) {
        my @o_warnL = split(/,/, $o_warn);
        my @o_critL = split(/,/, $o_crit);
        if (($#o_warnL != 1) || ($#o_critL != 1)) {
            print "2 warnings and critical !\n";
            print_usage();
            exit $ERRORS{"UNKNOWN"};
        }
        for (my $i = 0; $i < 2; $i++) {
            if (isnnum($o_warnL[$i]) || isnnum($o_critL[$i])) {
                print "Numeric value for warning or critical !\n";
                print_usage();
                exit $ERRORS{"UNKNOWN"};
            }
            if (($o_critL[$i] != 0) && ($o_warnL[$i] > $o_critL[$i])) {
                print "warning <= critical ! \n";
                print_usage();
                exit $ERRORS{"UNKNOWN"};
            }
            if ($o_critL[$i] > 100) {
                print "critical percent must be < 100 !\n";
                print_usage();
                exit $ERRORS{"UNKNOWN"};
            }
        }
        $o_warnR = $o_warnL[0];
        $o_warnS = $o_warnL[1];
        $o_critR = $o_critL[0];
        $o_critS = $o_critL[1];
    }

}

########## MAIN #######

check_options();

# Check gobal timeout if snmp screws up
if (defined($TIMEOUT)) {
    verb("Alarm at $TIMEOUT");
    alarm($TIMEOUT);
} else {
    verb("no timeout defined : $o_timeout + 10");
    alarm($o_timeout + 10);
}

# Connect to host
my ($session, $error);
if (defined($o_login) && defined($o_passwd)) {

    # SNMPv3 login
    if (!defined($o_privpass)) {
        verb("SNMPv3 AuthNoPriv login : $o_login, $o_authproto");
        ($session, $error) = Net::SNMP->session(
            -hostname     => $o_host,
            -version      => '3',
            -username     => $o_login,
            -authpassword => $o_passwd,
            -authprotocol => $o_authproto,
            -port         => $o_port,
            -timeout      => $o_timeout,
            -domain       => $o_domain
        );
    } else {
        verb("SNMPv3 AuthPriv login : $o_login, $o_authproto, $o_privproto");
        ($session, $error) = Net::SNMP->session(
            -hostname     => $o_host,
            -version      => '3',
            -username     => $o_login,
            -authpassword => $o_passwd,
            -authprotocol => $o_authproto,
            -privpassword => $o_privpass,
            -privprotocol => $o_privproto,
            -port         => $o_port,
            -timeout      => $o_timeout,
            -domain       => $o_domain
        );
    }
} else {
    if (defined($o_version2)) {

        # SNMPv2 Login
        verb("SNMP v2c login");
        ($session, $error) = Net::SNMP->session(
            -hostname  => $o_host,
            -version   => 2,
            -community => $o_community,
            -port      => $o_port,
            -timeout   => $o_timeout,
            -domain    => $o_domain
        );
    } else {

        # SNMPV1 login
        verb("SNMP v1 login");
        ($session, $error) = Net::SNMP->session(
            -hostname  => $o_host,
            -community => $o_community,
            -port      => $o_port,
            -timeout   => $o_timeout,
            -domain    => $o_domain
        );
    }
}
if (!defined($session)) {
    printf("ERROR opening session: %s.\n", $error);
    exit $ERRORS{"UNKNOWN"};
}

# Global variable
my $resultat = undef;

########### Cisco memory check ############
if (defined($o_cisco)) {

    # Get Cisco memory table
    $resultat
        = (version->parse(Net::SNMP->VERSION) < 4)
        ? $session->get_table($cisco_mem_pool)
        : $session->get_table(Baseoid => $cisco_mem_pool);

    if (!defined($resultat)) {
        printf("ERROR: Description table : %s.\n", $session->error);
        $session->close;
        exit $ERRORS{"UNKNOWN"};
    }
    my (@oid, @index) = (undef, undef);
    my $nindex = 0;
    foreach my $key (keys %$resultat) {
        verb("OID : $key, Desc : $$resultat{$key}");
        if ($key =~ /$cisco_index/) {
            @oid = split(/\./, $key);
            $index[$nindex++] = pop(@oid);
        }
    }

    # Check if at least 1 memory pool exists
    if ($nindex == 0) {
        printf("ERROR: No memory pools found");
        $session->close;
        exit $ERRORS{"UNKNOWN"};
    }

    # Test every memory pool
    my ($c_output, $prct_free) = (undef, undef);
    my ($warn_s,   $crit_s)    = (0,     0);
    my ($used,     $free)      = (0,     0);
    foreach (@index) {
        $c_output .= "," if defined($c_output);
        if ($$resultat{ $cisco_valid . "." . $_ } == 1) {
            $used += $$resultat{ $cisco_used . "." . $_ };
            $free += $$resultat{ $cisco_free . "." . $_ };
            $prct_free = round(
                $$resultat{ $cisco_used . "." . $_ } * 100
                    / ($$resultat{ $cisco_free . "." . $_ } + $$resultat{ $cisco_used . "." . $_ }),
                0
            );
            $c_output .= $$resultat{ $cisco_index . "." . $_ } . ":" . $prct_free . "%";
            if (($o_crit != 0) && ($o_crit <= $prct_free)) {
                $crit_s = 1;
            } elsif (($o_warn != 0) && ($o_warn <= $prct_free)) {
                $warn_s = 1;
            }
        } else {
            $c_output .= $$resultat{ $cisco_index . "." . $_ } . ": INVALID";
            $crit_s = 1;
        }
    }
    my $total = $used + $free;
    $prct_free = round($used * 100 / ($total), 0);
    verb("Total used : $used, free: $free, output : $c_output");
    my $c_status = "OK";
    $c_output .= " : " . $prct_free . "% : ";
    if ($crit_s == 1) {
        $c_output .= " > " . $o_crit;
        $c_status = "CRITICAL";
    } else {
        if ($warn_s == 1) {
            $c_output .= " > " . $o_warn;
            $c_status = "WARNING";
        }
    }
    $c_output .= " ; " . $c_status;
    if (defined($o_perf)) {
        $c_output .= " | ram_used=" . $used . ";";
        $c_output .= ($o_warn == 0) ? ";" : round($o_warn * $total / 100, 0) . ";";
        $c_output .= ($o_crit == 0) ? ";" : round($o_crit * $total / 100, 0) . ";";
        $c_output .= "0;" . $total;
    }
    $session->close;
    print "$c_output \n";
    exit $ERRORS{$c_status};
}

########### HP Procurve memory check ############
if (defined($o_hp)) {

    # Get hp memory table
    $resultat
        = (version->parse(Net::SNMP->VERSION) < 4)
        ? $session->get_table($hp_mem_pool)
        : $session->get_table(Baseoid => $hp_mem_pool);

    if (!defined($resultat)) {
        printf("ERROR: Description table : %s.\n", $session->error);
        $session->close;
        exit $ERRORS{"UNKNOWN"};
    }
    my (@oid, @index) = (undef, undef);
    my $nindex = 0;
    foreach my $key (keys %$resultat) {
        verb("OID : $key, Desc : $$resultat{$key}");
        if ($key =~ /$hp_mem_index/) {
            @oid = split(/\./, $key);
            $index[$nindex++] = pop(@oid);
        }
    }

    # Check if at least 1 memory slots exists
    if ($nindex == 0) {
        printf("ERROR: No memory slots found");
        $session->close;
        exit $ERRORS{"UNKNOWN"};
    }

    # Consolidate the datas
    my ($total,    $free)      = (0,     0);
    my ($c_output, $prct_free) = (undef, undef);
    foreach (@index) {
        $c_output .= "," if defined($c_output);
        $total += $$resultat{ $hp_mem_total . "." . $_ };
        $free  += $$resultat{ $hp_mem_free . "." . $_ };
        $c_output
            .= "Slot "
            . $$resultat{ $hp_mem_index . "." . $_ } . ":"
            . round(100 - ($$resultat{ $hp_mem_free . "." . $_ } * 100 / $$resultat{ $hp_mem_total . "." . $_ }), 0)
            . "%";
    }
    my $used = $total - $free;
    $prct_free = round($used * 100 / ($total), 0);
    verb("Used : $used, Free: $free, Output : $c_output");
    my $c_status = "OK";
    $c_output .= " : " . $prct_free . "% : ";
    if (($o_crit != 0) && ($o_crit <= $prct_free)) {
        $c_output .= " > " . $o_crit;
        $c_status = "CRITICAL";
    } else {
        if (($o_warn != 0) && ($o_warn <= $prct_free)) {
            $c_output .= " > " . $o_warn;
            $c_status = "WARNING";
        }
    }
    $c_output .= " ; " . $c_status;
    if (defined($o_perf)) {
        $c_output .= " | ram_used=" . $used . ";";
        $c_output .= ($o_warn == 0) ? ";" : round($o_warn * $total / 100, 0) . ";";
        $c_output .= ($o_crit == 0) ? ";" : round($o_crit * $total / 100, 0) . ";";
        $c_output .= "0;" . $total;
    }
    $session->close;
    print "$c_output \n";
    exit $ERRORS{$c_status};
}

########### Net snmp memory check ############
if (defined($o_netsnmp)) {

    # Get NetSNMP memory values
    $resultat
        = (version->parse(Net::SNMP->VERSION) < 4)
        ? $session->get_request(@nets_oids)
        : $session->get_request(-varbindlist => \@nets_oids);

    if (!defined($resultat)) {
        printf("ERROR: netsnmp : %s.\n", $session->error);
        $session->close;
        exit $ERRORS{"UNKNOWN"};
    }

    my ($realused, $swapused) = (undef, undef);
    my $totalcachedbuffered = 0;
    if (defined($o_buffer)) {
        $totalcachedbuffered = $$resultat{$nets_ram_buffer};
    }
    if (!defined($o_cache)) {
        $totalcachedbuffered = $totalcachedbuffered + $$resultat{$nets_ram_cache};
    }

    $realused = ($$resultat{$nets_ram_total} - ($$resultat{$nets_ram_free} + $totalcachedbuffered))
        / $$resultat{$nets_ram_total};
    if ($$resultat{$nets_ram_total} == 0) { $realused = 0; }
    $swapused
        = ($$resultat{$nets_swap_total} == 0)
        ? 0
        : ($$resultat{$nets_swap_total} - $$resultat{$nets_swap_free}) / $$resultat{$nets_swap_total};
    $realused = round($realused * 100, 0);
    $swapused = round($swapused * 100, 0);
    verb(
"Ram : $$resultat{$nets_ram_free} ($$resultat{$nets_ram_cache} cached, $$resultat{$nets_ram_buffer} buff) / $$resultat{$nets_ram_total} : $realused"
    );
    verb("Swap : $$resultat{$nets_swap_free} / $$resultat{$nets_swap_total} : $swapused");

    my $n_status = "OK";
    my $n_output = "Ram : " . $realused . "%, Swap : " . $swapused . "% :";
    if ((($o_critR != 0) && ($o_critR <= $realused)) || (($o_critS != 0) && ($o_critS <= $swapused))) {
        $n_output .= " > " . $o_critR . ", " . $o_critS;
        $n_status = "CRITICAL";
    } else {
        if ((($o_warnR != 0) && ($o_warnR <= $realused)) || (($o_warnS != 0) && ($o_warnS <= $swapused))) {
            $n_output .= " > " . $o_warnR . ", " . $o_warnS;
            $n_status = "WARNING";
        }
    }
    $n_output .= " ; " . $n_status;
    if (defined($o_perf)) {
        my $perf_ramused = ($$resultat{$nets_ram_total} - $$resultat{$nets_ram_free});
        $perf_ramused -= $$resultat{$nets_ram_cache}  if $o_perf > 1 or !defined($o_cache);
        $perf_ramused -= $$resultat{$nets_ram_buffer} if $o_perf > 1 or defined($o_buffer);

        $n_output .= " | ram_used=$perf_ramused;";
        $n_output .= ($o_warnR == 0) ? ";" : round($o_warnR * $$resultat{$nets_ram_total} / 100, 0) . ";";
        $n_output .= ($o_critR == 0) ? ";" : round($o_critR * $$resultat{$nets_ram_total} / 100, 0) . ";";
        $n_output .= "0;" . $$resultat{$nets_ram_total} . " ";
        $n_output .= "swap_used=" . ($$resultat{$nets_swap_total} - $$resultat{$nets_swap_free}) . ";";
        $n_output .= ($o_warnS == 0) ? ";" : round($o_warnS * $$resultat{$nets_swap_total} / 100, 0) . ";";
        $n_output .= ($o_critS == 0) ? ";" : round($o_critS * $$resultat{$nets_swap_total} / 100, 0) . ";";
        $n_output .= "0;" . $$resultat{$nets_swap_total};

        if ($o_perf > 1) {
            $n_output .= " buffered=" . $$resultat{$nets_ram_buffer} . ';;;0;' . $$resultat{$nets_ram_total};
            $n_output .= " cached="   . $$resultat{$nets_ram_cache}  . ';;;0;' . $$resultat{$nets_ram_total};
        }
    }
    $session->close;
    print "$n_output \n";
    exit $ERRORS{$n_status};

}