1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
|
/*
* mii.h 1.4 2000/04/25 22:06:15
*
* Media Independent Interface support: register layout and ioctl's
*
* Copyright (C) 2000 David A. Hinds -- dhinds@pcmcia.sourceforge.org
*/
#ifndef _LINUX_MII_H
#define _LINUX_MII_H
/* network interface ioctl's for MII commands */
#ifndef SIOCGMIIPHY
#define SIOCGMIIPHY (SIOCDEVPRIVATE) /* Read from current PHY */
#define SIOCGMIIREG (SIOCDEVPRIVATE+1) /* Read any PHY register */
#define SIOCSMIIREG (SIOCDEVPRIVATE+2) /* Write any PHY register */
#define SIOCGPARAMS (SIOCDEVPRIVATE+3) /* Read operational parameters */
#define SIOCSPARAMS (SIOCDEVPRIVATE+4) /* Set operational parameters */
#endif
#include <linux/types.h>
/* This data structure is used for all the MII ioctl's */
struct mii_data {
__u16 phy_id;
__u16 reg_num;
__u16 val_in;
__u16 val_out;
};
/* Basic Mode Control Register */
#define MII_BMCR 0x00
#define MII_BMCR_RESET 0x8000
#define MII_BMCR_LOOPBACK 0x4000
#define MII_BMCR_100MBIT 0x2000
#define MII_BMCR_AN_ENA 0x1000
#define MII_BMCR_ISOLATE 0x0400
#define MII_BMCR_RESTART 0x0200
#define MII_BMCR_DUPLEX 0x0100
#define MII_BMCR_COLTEST 0x0080
/* Basic Mode Status Register */
#define MII_BMSR 0x01
#define MII_BMSR_CAP_MASK 0xf800
#define MII_BMSR_100BASET4 0x8000
#define MII_BMSR_100BASETX_FD 0x4000
#define MII_BMSR_100BASETX_HD 0x2000
#define MII_BMSR_10BASET_FD 0x1000
#define MII_BMSR_10BASET_HD 0x0800
#define MII_BMSR_NO_PREAMBLE 0x0040
#define MII_BMSR_AN_COMPLETE 0x0020
#define MII_BMSR_REMOTE_FAULT 0x0010
#define MII_BMSR_AN_ABLE 0x0008
#define MII_BMSR_LINK_VALID 0x0004
#define MII_BMSR_JABBER 0x0002
#define MII_BMSR_EXT_CAP 0x0001
#define MII_PHY_ID1 0x02
#define MII_PHY_ID2 0x03
/* Auto-Negotiation Advertisement Register */
#define MII_ANAR 0x04
/* Auto-Negotiation Link Partner Ability Register */
#define MII_ANLPAR 0x05
#define MII_AN_NEXT_PAGE 0x8000
#define MII_AN_ACK 0x4000
#define MII_AN_REMOTE_FAULT 0x2000
#define MII_AN_ABILITY_MASK 0x07e0
#define MII_AN_FLOW_CONTROL 0x0400
#define MII_AN_100BASET4 0x0200
#define MII_AN_100BASETX_FD 0x0100
#define MII_AN_100BASETX_HD 0x0080
#define MII_AN_10BASET_FD 0x0040
#define MII_AN_10BASET_HD 0x0020
#define MII_AN_PROT_MASK 0x001f
#define MII_AN_PROT_802_3 0x0001
/* Auto-Negotiation Expansion Register */
#define MII_ANER 0x06
#define MII_ANER_MULT_FAULT 0x0010
#define MII_ANER_LP_NP_ABLE 0x0008
#define MII_ANER_NP_ABLE 0x0004
#define MII_ANER_PAGE_RX 0x0002
#define MII_ANER_LP_AN_ABLE 0x0001
#endif /* _LINUX_MII_H */
|
