!ident .Xdefaults Time-stamp: <98/05/06 16:45:11 bav> 
!******************************************************************
! .Xdefaults
!******************************************************************
!                           Gerd Bavendiek  bav@rw.sni.de  96-11-30
!
! Abgeleitet aus /usr/lib/xemacs-19.14/etc/sample.Xdefaults.
! Die nicht Xemacs-relevanten Definitionen stehen am Anfang.
! 
! Achtung ! Die mit lulu gekennzeichneten Eintrge nur fr Laptop !
!-------------------------------------------------------------------

xfig.*inches:	false

rxvt*scrollBar_right: true

! Folgendes fr xsysinfo
*customization: -color

! Im folgenden Xemacs
Emacs*cursorColor: Red

Emacs.default.attributeBackground:      white
Mozilla*Background:      white



! Die Ergnzung +0+0 ist bei der Benutzung von gnuclient hilfreich: Es
! wird dann das neue Fenster immer links oben positioniert.

! In general, changes to your .Xdefaults file will not take effect until the
! next time you restart the window system.  To reload your resources
! explicitly, use the shell command
! 
! 	xrdb -load ~/.Xdefaults
! 
! The resources will take effect the next time you restart XEmacs.  (Simply
! creating a new xemacs frame is not enough - you must restart the editor
! for the changes to take effect.)
! 


! Colors and backgrounds.
! ======================
! The contrasts of these colors will cause them to map to the appropriate
! one of "black" or "white" on monochrome systems.
! 
! The valid color names on your system can be found by looking in the file
! `rgb.txt', usually found in /usr/lib/X11/ or /usr/openwin/lib/X11/.

! Set the modeline colors.
Emacs.modeline*attributeForeground:	Black
Emacs.modeline*attributeBackground:	Gray75

! Set the color of the text cursor.
Emacs.text-cursor*attributeBackground:	Red3

! If you want to set the color of the mouse pointer, do this:
! Emacs.pointer*attributeForeground:	Black
! If you want to set the background of the mouse pointer, do this:
! Emacs.pointer*attributeBackground:	White
! Note that by default, the pointer foreground and background are the same
! as the default face.

! Set the menubar colors.  This overrides the default foreground and
! background colors specified above.
Emacs*menubar*Foreground:		Gray30
Emacs*menubar*Background:		Gray75
! This is for buttons in the menubar.  
! Yellow would be better, but that would map to white on monochrome.
Emacs*menubar.buttonForeground:		Blue
Emacs*XlwMenu.selectColor:		ForestGreen
Emacs*XmToggleButton.selectColor:	ForestGreen

! Specify the colors of popup menus.
Emacs*popup*Foreground:			Black
Emacs*popup*Background:			Gray75

! Specify the colors of the various sub-widgets of the dialog boxes.
Emacs*dialog*Foreground:		Black
! #A5C0C1 is a shade of blue
Emacs*dialog*Background:		#A5C0C1
! The following three are for Motif dialog boxes ...
Emacs*dialog*XmTextField*Background:	WhiteSmoke
Emacs*dialog*XmText*Background:		WhiteSmoke
Emacs*dialog*XmList*Background:		WhiteSmoke
! While this one is for Athena dialog boxes.
Emacs*dialog*Command*Background:	WhiteSmoke

! Xlw Scrollbar colors
Emacs*XlwScrollBar.Foreground:		Gray30
Emacs*XlwScrollBar.Background:		Gray75
Emacs*XmScrollBar.Foreground:		Gray30
Emacs*XmScrollBar.Background:		Gray75

!
! The Lucid Scrollbar supports two added resources, KnobStyle is either
! "plain" (default) or "dimple".  Dimple puts a small dimple in the middle
! of the knob that depresses when the knob is clicked on.  ArrowPosition is
! either "opposite" (default) or "same".  Opposite puts the arrows at opposite
! of the scrollbar, same puts both arrows at the same end, like the Amiga.
!
! Emacs*XlwScrollBar.KnobStyle:      dimple
! Emacs*XlwScrollBar.ArrowPosition:  opposite


!
! If you want to turn off a toolbar, set its height or width to 0.
! The correct size value is not really arbitrary.  We only control it
! this way in order to avoid excess frame resizing when turning the
! toolbars on and off.
!
! To change the heights and widths of the toolbars:
!
! Emacs.topToolBarHeight:		37
! Emacs.bottomToolBarHeight:		0
! Emacs.leftToolBarWidth:		0
! Emacs.rightToolBarWidth:		0

Emacs*topToolBarShadowColor:		Gray90
Emacs*bottomToolBarShadowColor:		Gray40
Emacs*backgroundToolBarColor:		Gray75
Emacs*toolBarShadowThickness:		2


! If you want to turn off vertical scrollbars, or change the default
! pixel width of the vertical scrollbars, do it like this (0 width
! means no vertical scrollbars):
! 
! Emacs.scrollBarWidth: 0
! 
! To change it for a particular frame, do this:
! 
! Emacs*FRAME-NAME.scrollBarWidth: 0


! If you want to turn off horizontal scrollbars, or change the default
! pixel height of the horizontal scrollbars, do it like this (0 height
! means no horizontal scrollbars):
! 
! Emacs.scrollBarHeight: 0
! 
! To change it for a particular frame, do this:
! 
! Emacs*FRAME-NAME.scrollBarHeight: 0


! To dynamically change the labels used for menubar buttons...
! 
! Emacs*XlwMenu.resourceLabels: True
! Emacs*XlwMenu.newFrame.labelString: Open Another Window

! To have the Motif scrollbars on the left instead of the right, do this:
! 
! Emacs*scrollBarPlacement: BOTTOM_LEFT
!
! To have the Athena scrollbars on the right, use `BOTTOM_RIGHT' instead

! To have Motif scrollbars act more like Xt scrollbars...
!
! Emacs*XmScrollBar.translations: #override \n\
!     <Btn1Down>:     PageDownOrRight(0)    \n\
!     <Btn3Down>:     PageUpOrLeft(0)

! Fonts.
! ======
! XEmacs requires the use of XLFD (X Logical Font Description) format font
! names, which look like
! 
! 	*-courier-medium-r-*-*-*-120-*-*-*-*-*-*
! 
! if you use any of the other, less strict font name formats, some of which
! look like
! 		lucidasanstypewriter-12
! and		fixed
! and		9x13
! 
! then XEmacs won't be able to guess the names of the bold and italic versions.
! All X fonts can be referred to via XLFD-style names, so you should use those
! forms.  See the man pages for X(1), xlsfonts(1), and xfontsel(1).

! Ohne Anpassungen kann ich das einfach nicht lesen - viel zu klein.
! Der fixed 10x20-Font liefert die grten Zeichen, die in XFree zu
! finden sind.
#if WIDTH == 1024
rxvt*font:  -misc-fixed-medium-r-normal--20-200-75-75-c-100-iso8859-1

rxvt*geometry: 89x31+0+0
xconsole*geometry: 800x120+0+600
Emacs*EmacsFrame.geometry: 89x31+0+0
Emacs.default.attributeFont:  -misc-fixed-medium-r-normal--20-200-75-75-c-100-iso8859-1
! lulu
!!!Emacs.default.attributeFont:  -misc-fixed-medium-r-normal--20-200-75-75-c-100-iso8859-1
! Es gibt keine Italics-Version, daher Zuweisung wie folgt:
Emacs.italic.attributeFont:  -*-courier-medium-o-*-*-*-120-*-*-*-*-iso8859-*
! lulu
!!!Emacs.italic.attributeFont:  -*-courier-medium-o-*-*-*-120-*-*-*-*-iso8859-*

!
! And here is how you would set the background color of the `highlight' face,
! but only on the screen named `debugger':
! 
! Emacs*debugger.highlight.attributeBackground:		PaleTurquoise
! 
! See the NEWS file (C-h n) for a more complete description of the resource
! syntax of faces.


! Font of the modeline, menubar and pop-up menus.
! Note that the menubar resources do not use the `face' syntax, since they
! are X toolkit widgets and thus outside the domain of XEmacs proper.
! 
Emacs*menubar*Font: 		-*-helvetica-bold-r-*-*-*-120-*-*-*-*-iso8859-*
Emacs*popup*Font:		-*-helvetica-bold-r-*-*-*-120-*-*-*-*-iso8859-*

! Font in the Motif dialog boxes.
! (Motif uses `fontList' while most other things use `font' - if you don't
! know why you probably don't want to.)
! 
Emacs*XmDialogShell*FontList:	-*-helvetica-bold-r-*-*-*-120-*-*-*-*-iso8859-*
Emacs*XmTextField*FontList:	-*-courier-medium-r-*-*-*-120-*-*-*-*-iso8859-*
Emacs*XmText*FontList:		-*-courier-medium-r-*-*-*-120-*-*-*-*-iso8859-*
Emacs*XmList*FontList:		-*-courier-medium-r-*-*-*-120-*-*-*-*-iso8859-*

! Font in the Athena dialog boxes.
! I think 14-point looks nicer than 12-point.
! Some people use 12-point anyway because you get more text, but
! there's no purpose at all in doing this for dialog boxes.

Emacs*Dialog*Font:		-*-helvetica-bold-r-*-*-*-140-*-*-*-*-iso8859-*
#elif WIDTH == 800
rxvt*font:  -*-lucidatypewriter-medium-r-normal-sans-14-140-75-75-m-90-iso8859-1
rxvt*geometry:  82x29+0+0
xconsole*geometry: 600x85+0+470

kscd*geometry: 200x85+0+470

Emacs*EmacsFrame.geometry: 82x29+0+0
! Xemacs seems to be very sensible about fonts naming. Following does
! NOT work: 
!Emacs.default.attributeFont:  -*-lucidatypewriter-medium-r-normal--*-140-75-75-*-*-iso8859-1
! This does:
Emacs.default.attributeFont:  -*-lucidatypewriter-medium-r-normal-sans-14-140-75-75-m-90-iso8859-1
!Emacs.default.attributeFont:  -misc-fixed-medium-r-semicondensed--0-0-75-75-c-0-iso8859-1
Emacs.italic.attributeFont:  -*-courier-medium-o-*-*-*-140-*-*-*-*-iso8859-*
Emacs*menubar*Font: 		-*-helvetica-bold-r-*-*-*-120-*-*-*-*-iso8859-*
Emacs*popup*Font:		-*-helvetica-bold-r-*-*-*-140-*-*-*-*-iso8859-*
Emacs*XmDialogShell*FontList:	-*-helvetica-bold-r-*-*-*-140-*-*-*-*-iso8859-*
Emacs*XmTextField*FontList:	-*-courier-medium-r-*-*-*-140-*-*-*-*-iso8859-*
Emacs*XmText*FontList:		-*-courier-medium-r-*-*-*-140-*-*-*-*-iso8859-*
Emacs*XmList*FontList:		-*-courier-medium-r-*-*-*-140-*-*-*-*-iso8859-*
Emacs*Dialog*Font:		-*-helvetica-bold-r-*-*-*-140-*-*-*-*-iso8859-*
#endif

! Dialog box translations.
! =======================

! This accelerator binds <return> in a dialog box to <activate> on button1
Emacs*dialog*button1.accelerators:#override\
<KeyPress>Return: ArmAndActivate()\n\
<KeyPress>KP_Enter: ArmAndActivate()\n\
Ctrl<KeyPress>m: ArmAndActivate()\n

! Translations to make the TextField widget behave more like XEmacs
Emacs*XmTextField.translations: #override\n\
	!<Key>osfBackSpace:	delete-previous-character()\n\
	!<Key>osfDelete:	delete-previous-character()\n\
	!Ctrl<Key>h: 		delete-previous-character()\n\
	!Ctrl<Key>d: 		delete-next-character()\n\
	!Meta<Key>osfDelete:	delete-previous-word()\n\
	!Meta<Key>osfBackSpace:	delete-previous-word()\n\
	!Meta<Key>d:		delete-next-word()\n\
	!Ctrl<Key>k:		delete-to-end-of-line()\n\
	!Ctrl<Key>g:		process-cancel()\n\
	!Ctrl<Key>b:		backward-character()\n\
	!<Key>osfLeft:		backward-character()\n\
	!Ctrl<Key>f:		forward-character()\n\
	!<Key>osfRight:		forward-character()\n\
	!Meta<Key>b:		backward-word()\n\
	!Meta<Key>osfLeft:	backward-word()\n\
	!Meta<Key>f:		forward-word()\n\
	!Meta<Key>osfRight:	forward-word()\n\
	!Ctrl<Key>e:		end-of-line()\n\
	!Ctrl<Key>a:		beginning-of-line()\n\
	!Ctrl<Key>w:		cut-clipboard()\n\
	!Meta<Key>w:		copy-clipboard()\n\
	<Btn2Up>:		copy-primary()\n

! With the XEmacs typeahead it's better to not have space be bound to
! ArmAndActivate() for buttons that appear in dialog boxes.  This is
! not 100% Motif compliant but the benefits far outweight the
! compliancy problem.  
Emacs*dialog*XmPushButton.translations:#override\n\
    <Btn1Down>:         Arm()\n\
    <Btn1Down>,<Btn1Up>: Activate()\
			Disarm()\n\
    <Btn1Down>(2+):     MultiArm()\n\
    <Btn1Up>(2+):       MultiActivate()\n\
    <Btn1Up>:           Activate()\
		        Disarm()\n\
    <Key>osfSelect:  	ArmAndActivate()\n\
    <Key>osfActivate:   ArmAndActivate()\n\
    <Key>osfHelp:	Help()\n\
    ~Shift ~Meta ~Alt <Key>Return:	ArmAndActivate()\n\
    <EnterWindow>:      Enter()\n\
    <LeaveWindow>:      Leave()\n

! Das folgende aus irgendeinem Posting - vielleicht hilft es ja mal ...
!Emacs.BitmapIcon:on
!Emacs*font:  -adobe-helvetica-bold-r-normal--14-*-*-*-*-*-iso8859-1
!Emacs.font:  -adobe-courier-medium-r-normal--14-*-75-75-m-*-iso8859-1
!Emacs*font: -adobe-helvetica-medium-r-*-*-*-120-*-*-*-*-*-*
!Emacs.font: -adobe-courier-medium-r-normal--12-120-75-75-m-70-iso8859-1
!Emacs.shell*background:                 lightgray
!Emacs.shell.pane*EmacsFrame.background: white
!Emacs.shell.pane*background:            lightgray
!Emacs.displayType:                      color
!Emacs.?.dialog*background:              lightgrey
!*menubar.background: lightgray
!*dialog*background:  lightgrey