#!/bin/sh
#	install.sh
#	Copyright (c) 2013-2016, by Eaton (R) Corporation. All rights reserved.
#	A shell script which installs IPP - Unix
#	It installs the native package then runs NUT configuration tools
#	to create an initial configuration and finally run the service.
. ./version.sh

PATH="$PATH:/bin:/usr/bin:/sbin:/usr/sbin:/usr/ucb:/usr/ccs/bin:/usr/xpg4/bin:/usr/xpg6/bin"
export PATH


NUT_PACKAGE_SOLARI="NUT_solaris_sparc_package2.6.5.local"
NUT_PACKAGE_SOLINT="NUT_solaris_i386_package2.6.5.local"

COMMON_DIR="common"
LOG_FILE=install.log
[ x"${IPP_DEBUG-}" = xyes ] || IPP_DEBUG=no
[ x"${IPP_WIPE_OLD_CONFIG-}" = xyes ] || IPP_WIPE_OLD_CONFIG=no

#configuration data
C_MODE="standalone"
C_HOSTNAME="localhost"
C_DEVICE=""
C_OPTION=""
C_NUM_DEV=0
C_PASSWORD=""
# Number of seconds for late emergency shutdown, goes into netxml-ups
# to get alerts from the UPS when battery runs low, *and* becomes the
# DELAY setting in ipp.conf used to power-cycle the UPSes in the end.
C_SHUTDOWN_DURATION="120"
# Number of minutes spent ONBATT for early-shutdown, goes into ipp.conf
# This logically matches the netxml-ups "shutdown_timer" parameter
# which is exclusive to this one driver and does not always work.
C_SHUTDOWN_TIMER="-1"
C_MINSUPPLIES=1
C_COMMUNITY="public"
C_NUM_NETWORK_DEVICE=0
# empty for automatic, "forbid" or "enforce" for once-and-for-all
C_POWERDOWNFLAG_USER=""

FIRST_IP=""
LAST_IP=""
NUT_PORT="3493"

ADMIN_FILE="/tmp/ipp_admin_file"

cd "`dirname $0`"

. "$COMMON_DIR/string.sh"

get_parameters() {
	case $1 in
	English)
		lang=EN
		;;
#	Japanese)
#		lang=JP
#		;;
	SOLARI)
		SYSTEM=$1
		;;
	SOLINT)
		SYSTEM=$1
		;;
	HPUX)
		SYSTEM=$1
		;;
	AIX)
		SYSTEM=$1
		;;
	esac
}

check_locale_language() {
	set `locale` >/dev/null 2>&1
	case $1 in
	LANG=en_US)
		lang=EN
		;;
	LANG=C)
		lang=EN
		;;
	esac
}

compute_SYSTEM () {
	set `uname -a`
	case "$1" in
	SunOS)
		case "$3" in
		5.*)
			case "$5" in
			i86pc)
				SYSTEM=SOLINT
				;;
			*)
				SYSTEM=SOLARI
				;;
			esac
		;;
		*)
			SYSTEM="Unknown System"
			;;
		esac
		;;
	HP-UX)
		SYSTEM=HPUX
		;;
	AIX)
		case "$4" in
		6)
			SYSTEM=AIX
			;;
		7)
			SYSTEM=AIX
			;;
		*)
			SYSTEM="This AIX version is not supported"
		;;
		esac
		;;
	*)
		SYSTEM="Unknown System"
		;;
	esac

	compute_system
}

compute_system () {
	case "$SYSTEM" in
	SOLINT)
		system=solint
		COMMON_DIR_SYS=solcmn
		;;
	SOLARI)
		system=solari
		COMMON_DIR_SYS=solcmn
		;;
	HPUX)
		system=hpux
		COMMON_DIR_SYS="$system"
		;;
	AIX)
		system=aix
		COMMON_DIR_SYS="$system"
		;;
	*)
		echo
		necho $ERR_UNKNOWN_SYS_STR1
		necho $ERR_UNKNOWN_SYS_STR2
#		echo "Valid systems are tagged SOLINT SOLARI HPUX AIX"
		necho $ERR_UNKNOWN_SYS_STR3
		echo
		necho $INSTALL_ERROR
		exit 1
		;;
	esac
}

read_def () {
	default="$2"

	if [ "$2" = "" ]; then
		necho "$1"
	else
		necho "$1" "[" "$2" "]"
	fi

	read answer
	if [ -z "$answer" ]; then
		answer="$default"
	fi
}

read_def_silent () {
	default="$2"

	necho $1
	stty -echo
	read answer
	stty echo
	if [ -z "$answer" ]; then
		answer="$default"
	fi
}

create_admin_file () {
	echo basedir=default > "$ADMIN_FILE"
	echo runlevel=quit >> "$ADMIN_FILE"
	echo conflict=nocheck >> "$ADMIN_FILE"
	echo setuid=nocheck >> "$ADMIN_FILE"
	echo action=nocheck >> "$ADMIN_FILE"
	echo partial=nocheck >> "$ADMIN_FILE"
	echo instance=overwrite >> "$ADMIN_FILE"
	echo idepend=quit >> "$ADMIN_FILE"
	echo rdepend=quit >> "$ADMIN_FILE"
	echo space=quit >> "$ADMIN_FILE"
}

install_files () {
	echo
	case "$LOG_FILE" in
		/*) ;;
		*)  LOG_FILE="`pwd`/$LOG_FILE" ;;
	esac
	rm -f "$LOG_FILE" > /dev/null 2>&1
	touch "$LOG_FILE"

	echo "NOTE: progress of this script's interpretation (and errors) will be logged into"
	echo "      $LOG_FILE"
	echo "      You should attach it to support calls should any problems arise"
	exec 2>"$LOG_FILE"
	echo "Started at `date` as: $0 $*" >&2
	set >&2
	set -x

	. ./uninstall-lsnw.sh
	# Check if Lansafe is installed
	detect_lansafe
	if [ $? -eq 0 ]; then
		necho $CS_REMOVE_LS
		# Proceed to uninstallation
		uninstall_lansafe
	fi

	# Check if Netwatch is installed
	detect_netwatch
	if [ $? -eq 0 ]; then
		necho $CS_REMOVE_NW
		# Proceed to uninstallation
		uninstall_netwatch
	fi

	# Clean-up previous installation
	remove_profile_settings
	if [ -d "/var/state/ups" ]; then
		rm -rf "/var/state/ups"
	fi
	if [ -d "/var/run/nut" ]; then
		rm -rf "/var/run/nut"
	fi
	if [ -d "$instpath/etc" ]; then
		cp -prf "$instpath/etc" "$instpath/etc.bak-$$"
		if [ x"${IPP_WIPE_OLD_CONFIG}" = xyes ]; then
			echo "Removing old configs because IPP_WIPE_OLD_CONFIG=yes"
			rm -rf "$instpath/etc"
		fi
	fi
	if [ -d "$instpath/xbin" ]; then
		rm -rf "$instpath/xbin"
	fi
	if [ -x "$instpath/bin/uninstall-ipp" ]; then
		necho $CS_REMOVE_OLDIPP
		"$instpath/bin/uninstall-ipp" || true
	fi
	if [ -e "$instpath/bin/ipp-wrapper" ]; then
		rm -f "$instpath/bin/ipp-wrapper" || true
	fi

	case "$system" in
	solari)
		necho $REMOVE_PACKAGE | tee -a "$LOG_FILE"

		create_admin_file

		pkgrm -n -a "$ADMIN_FILE" NUT >> "$LOG_FILE" 2>&1
		necho $INSTALL_PACKAGE | tee -a "$LOG_FILE"
		pkgadd -a "$ADMIN_FILE" -n \
			-d "$systemdir/$NUT_PACKAGE_SOLARI" NUT \
			>> "$LOG_FILE" 2>&1
		res=$?
		if [ ! $res = 0 ]; then
			necho $INSTALL_ERROR
			exit 1
		fi
		rm -f "$ADMIN_FILE"
		# Modified initscript, to run upsmon as full root,
		# for optional early-shutdown support
		if [ -s "$COMMON_DIR_SYS/solaris_init" ]; then
			cp -f "$COMMON_DIR_SYS/solaris_init" "$instpath/nut"
			res=$?
			if [ ! $res = 0 ]; then
				necho $INSTALL_ERROR
				exit 1
			fi
		fi
		chown root:ipp "$instpath/nut" >> "$LOG_FILE" 2>&1 && \
		chmod 755 "$instpath/nut" >> "$LOG_FILE" 2>&1
		res=$?
		if [ ! $res = 0 ]; then
			necho $INSTALL_ERROR
			exit 1
		fi
		rm -f /etc/init.d/nut /etc/rc3.d/K100nut /etc/rc3.d/S100nut /etc/rc3.d/S99nut /etc/rc0.d/K60nut
		ln -s "../../$instpath/nut" /etc/init.d/nut && \
		ln -s "../init.d/nut" /etc/rc3.d/S99nut && \
		ln -s "../init.d/nut" /etc/rc0.d/K60nut
		res=$?
		if [ ! $res = 0 ]; then
			necho $INSTALL_ERROR
			exit 1
		fi
	;;
	solint)
		necho $REMOVE_PACKAGE | tee -a "$LOG_FILE"

		create_admin_file

		pkgrm -n -a "$ADMIN_FILE" NUT >> "$LOG_FILE" 2>&1
		necho $INSTALL_PACKAGE | tee -a "$LOG_FILE"
		pkgadd -a "$ADMIN_FILE" -n \
			-d "$systemdir/$NUT_PACKAGE_SOLINT" NUT \
			>> "$LOG_FILE" 2>&1
		res=$?
		if [ ! $res = 0 ]; then
			necho $INSTALL_ERROR
			exit 1
		fi
		rm -f "$ADMIN_FILE"
		# Modified initscript, to run upsmon as full root,
		# for optional early-shutdown support
		if [ -s "$COMMON_DIR_SYS/solaris_init" ]; then
			cp -f "$COMMON_DIR_SYS/solaris_init" "$instpath/nut"
			res=$?
			if [ ! $res = 0 ]; then
				necho $INSTALL_ERROR
				exit 1
			fi
		fi
		chown root:ipp "$instpath/nut" >> "$LOG_FILE" 2>&1 && \
		chmod 755 "$instpath/nut" >> "$LOG_FILE" 2>&1
		res=$?
		if [ ! $res = 0 ]; then
			necho $INSTALL_ERROR
			exit 1
		fi
		rm -f /etc/init.d/nut /etc/rc3.d/K100nut /etc/rc3.d/S100nut /etc/rc3.d/S99nut /etc/rc0.d/K60nut
		ln -s "../../$instpath/nut" /etc/init.d/nut && \
		ln -s "../init.d/nut" /etc/rc3.d/S99nut && \
		ln -s "../init.d/nut" /etc/rc0.d/K60nut
		res=$?
		if [ ! $res = 0 ]; then
			necho $INSTALL_ERROR
			exit 1
		fi
	;;
	hpux)
		cd "$systemdir"
		rm -f nut.depot.tar > /dev/null 2>&1
		rm -Rf nut.depot > /dev/null 2>&1
		gunzip nut.depot.tar.gz >> "../$LOG_FILE" 2>&1
		res=$?
		if [ ! $res = 0 ]; then
			cd ..
			necho $INSTALL_ERROR
			exit 1
		fi
		tar xvf nut.depot.tar >> "../$LOG_FILE" 2>&1
		res=$?
		if [ ! $res = 0 ]; then
			cd ..
			necho $INSTALL_ERROR
			exit 1
		fi
		cd ..
		necho $REMOVE_PACKAGE | tee -a "$LOG_FILE"
		remove_hpux_upsmon_esd_support
		swremove NUT >> "$LOG_FILE" 2>&1
		necho $INSTALL_PACKAGE | tee -a "$LOG_FILE"
		swinstall -s "`pwd`/$systemdir/nut.depot/" NUT \
			>> "$LOG_FILE" 2>&1
		res=$?
		if [ ! $res = 0 ]; then
			necho $INSTALL_ERROR
			exit 1
		fi
		add_hpux_upsmon_esd_support
	;;
	aix)
		necho $REMOVE_PACKAGE | tee -a "$LOG_FILE"
		rm -rf "$instpath/share/man" >> "$LOG_FILE" 2>&1
		rpm -e nut >> "$LOG_FILE" 2>&1
		rpm -e nut-client >> "$LOG_FILE" 2>&1
		necho $INSTALL_PACKAGE | tee -a "$LOG_FILE"
		rpm -i --nodeps `ls "$systemdir"/nut-*.aix6.1.ppc.rpm | grep -v 'nut-client'` \
			>> "$LOG_FILE" 2>&1
		res=$?
		if [ ! $res = 0 ]; then
			necho $INSTALL_ERROR
			exit 1
		fi
		rpm -i --nodeps "$systemdir/"nut-client-*.aix6.1.ppc.rpm \
			>> "$LOG_FILE" 2>&1
		res=$?
		if [ ! $res = 0 ]; then
			necho $INSTALL_ERROR
			exit 1
		fi
		# Modified initscript, to run upsmon as full root,
		# for optional early-shutdown support
		if [ -s "$COMMON_DIR_SYS/aix_init" ]; then
			cp -f "$COMMON_DIR_SYS/aix_init" /etc/rc.d/init.d/ups
			res=$?
			chown root:ipp "/etc/rc.d/init.d/ups" >> "$LOG_FILE" 2>&1
			chmod 755 "/etc/rc.d/init.d/ups" >> "$LOG_FILE" 2>&1
			if [ ! $res = 0 ]; then
				necho $INSTALL_ERROR
				exit 1
			fi
		fi
		if [ ! -d "$instpath/share/man" ]; then
			for N in 1 3 5 8 ; do
				mkdir -p "$instpath/share/man/man$N" && \
				( cd "$instpath/share/man/man$N" && { \
					ln -s ../../../man/man$N/*.$N .
					ln -s ../../doc/nut-*/docs/man/*.$N . 2>/dev/null
				  } ; )
			done >> "$LOG_FILE" 2>&1
		fi
	;;

	*)
		necho $INSTALL_ERROR
		exit 1
	;;
	esac

	#ipp-wrapper goes first of custom files, to symlink against just
	# the packaged binaries - an action which we do first of all
	mkdir "$instpath/xbin" >> "$LOG_FILE" 2>&1
	chown root:ipp "$instpath/xbin" >> "$LOG_FILE" 2>&1
	chmod 755 "$instpath/xbin" >> "$LOG_FILE" 2>&1
	( cd "$instpath/bin" && for F in * ; do
		if [ -f "$F" ] && [ ! -d "$F" ] && [ -x "$F" ] ; then
			ln -s "../bin/ipp-wrapper" "../xbin/$F"
		fi
	  done )
	( cd "$instpath/sbin" && for F in * ; do
		if [ -f "$F" ] && [ ! -d "$F" ] && [ -x "$F" ] && [ ! -x "../xbin/$F" ] ; then
			ln -s "../bin/ipp-wrapper" "../xbin/$F"
		fi
	  done )
	cp "$COMMON_DIR/ipp-wrapper" "$instpath/bin" >> "$LOG_FILE" 2>&1
	chown root:ipp "$instpath/bin/ipp-wrapper" >> "$LOG_FILE" 2>&1
	chmod 755 "$instpath/bin/ipp-wrapper" >> "$LOG_FILE" 2>&1

	#install additional libraries
	cp "$systemdir/libs/"* "$instpath/lib" >> "$LOG_FILE" 2>&1
	chown root:ipp "$instpath/lib/*" >> "$LOG_FILE" 2>&1

	#powercycle-setting scripts
	cp "$COMMON_DIR/init" "$instpath" >> "$LOG_FILE" 2>&1
	chown root:ipp "$instpath/init" >> "$LOG_FILE" 2>&1
	chmod 744 "$instpath/init" >> "$LOG_FILE" 2>&1
	cp "$COMMON_DIR/shutdown" "$instpath" >> "$LOG_FILE" 2>&1
	chown root:ipp "$instpath/shutdown" >> "$LOG_FILE" 2>&1
	chmod 744 "$instpath/shutdown" >> "$LOG_FILE" 2>&1

	#OS shutdown script
	cp "$COMMON_DIR/ipp-os-shutdown" "$instpath/sbin" >> "$LOG_FILE" 2>&1
	chown root:ipp "$instpath/sbin/ipp-os-shutdown" >> "$LOG_FILE" 2>&1
	chmod 744 "$instpath/sbin/ipp-os-shutdown" >> "$LOG_FILE" 2>&1

	# Config file with parameters for the shutdown program
	cp -f "$COMMON_DIR_SYS/ipp-os-shutdown.conf.sample" "$instpath/etc"
	if [ ! -s "$instpath/etc/ipp-os-shutdown.conf" ]; then
		cp -f "$instpath/etc/ipp-os-shutdown.conf.sample" \
			"$instpath/etc/ipp-os-shutdown.conf" >> "$LOG_FILE" 2>&1
	fi
	chown root:ipp "$instpath/etc/ipp-os-shutdown.conf" >> "$LOG_FILE" 2>&1
	chmod 640 "$instpath/etc/ipp-os-shutdown.conf" >> "$LOG_FILE" 2>&1

	#custom shutdown procedure script
	cp "$COMMON_DIR/ipp-host-shutdown.sample" "$instpath/sbin" >> "$LOG_FILE" 2>&1
	chown root:ipp "$instpath/sbin/ipp-host-shutdown.sample" >> "$LOG_FILE" 2>&1
	chmod 644 "$instpath/sbin/ipp-host-shutdown.sample" >> "$LOG_FILE" 2>&1

	#notifier script
	cp "$COMMON_DIR/ipp-notifier.sh" "$instpath/bin" >> "$LOG_FILE" 2>&1
	chown root:ipp "$instpath/bin/ipp-notifier.sh" >> "$LOG_FILE" 2>&1
	chmod 754 "$instpath/bin/ipp-notifier.sh" >> "$LOG_FILE" 2>&1

	#sensitive config file, including passwords
	cp -f "$COMMON_DIR/ipp.conf" "$instpath/etc/ipp.conf.sample" >> "$LOG_FILE" 2>&1
	if [ ! -s "$instpath/etc/ipp.conf" ]; then
		cp -f "$instpath/etc/ipp.conf.sample" "$instpath/etc/ipp.conf" >> "$LOG_FILE" 2>&1
	fi
	chown root:ipp "$instpath/etc/ipp.conf" >> "$LOG_FILE" 2>&1
	chmod 640 "$instpath/etc/ipp.conf" >> "$LOG_FILE" 2>&1

	#uninstall-ipp
	cp uninstall-ipp "$instpath/bin" >> "$LOG_FILE" 2>&1
	chown root:ipp "$instpath/bin/uninstall-ipp" >> "$LOG_FILE" 2>&1
	chmod 744 "$instpath/bin/uninstall-ipp" >> "$LOG_FILE" 2>&1
	cp "$COMMON_DIR/string.sh" "$instpath/share" >> "$LOG_FILE" 2>&1
	chown root:ipp "$instpath/share/string.sh" >> "$LOG_FILE" 2>&1
	chmod 644 "$instpath/share/string.sh" >> "$LOG_FILE" 2>&1
	cp "$COMMON_DIR"_$lang/install.res "$instpath/share" >> "$LOG_FILE" 2>&1
	chown root:ipp "$instpath/share/install.res" >> "$LOG_FILE" 2>&1
	chmod 644 "$instpath/share/install.res" >> "$LOG_FILE" 2>&1

	#ipp-status
	cp "$COMMON_DIR/ipp-status" "$instpath/bin" >> "$LOG_FILE" 2>&1
	chown root:ipp "$instpath/bin/ipp-status" >> "$LOG_FILE" 2>&1
	chmod 755 "$instpath/bin/ipp-status" >> "$LOG_FILE" 2>&1

}

#######################
# Configuration screens

initial_configure () {

	conf_ok=""
	while [ -z "$conf_ok" ]; do
		C_NUM_DEV=0
		choose_mode
		if [ $? = 1 ]; then
			review_conf
		fi
	done

	# Make sure configuration files are not world readable
	chown ipp:ipp "$instpath/etc/ups.conf" >> "$LOG_FILE" 2>&1
	chmod 640 "$instpath/etc/ups.conf" >> "$LOG_FILE" 2>&1

	chown ipp:ipp "$instpath/etc/upsd.conf" >> "$LOG_FILE" 2>&1
	chmod 640 "$instpath/etc/upsd.conf" >> "$LOG_FILE" 2>&1

	chown ipp:ipp "$instpath/etc/nut.conf" >> "$LOG_FILE" 2>&1
	chmod 640 "$instpath/etc/nut.conf" >> "$LOG_FILE" 2>&1

	chown ipp:ipp "$instpath/etc/upsmon.conf" >> "$LOG_FILE" 2>&1
	chmod 640 "$instpath/etc/upsmon.conf" >> "$LOG_FILE" 2>&1

	chown ipp:ipp "$instpath/etc/upsd.users" >> "$LOG_FILE" 2>&1
	chmod 640 "$instpath/etc/upsd.users" >> "$LOG_FILE" 2>&1

	# Report the SHUTDOWNSCRIPT_CUSTOM value or that it is missing
	_VAR="`egrep '^[ \t]*SHUTDOWNSCRIPT_CUSTOM=' "$instpath/etc/ipp.conf" 2>/dev/null`" || CC_SHUTDOWNSCRIPT_CUSTOM=""
	if [ -n "${_VAR}" ] ; then
		_VAR="`echo "${_VAR}" | sed 's,^[ \t]*SHUTDOWNSCRIPT_CUSTOM=,,'`"
		_VAR="`echo "${_VAR}" | sed -e 's,^"\(.*\)"$,\1,g' -e "s,^\'\(.*\)\'$,\1,g"`"
		case "${_VAR}" in
			*NUT_DIR*) _VAR1="`egrep '^[^\#]*NUT_DIR=' "$instpath/etc/ipp.conf" 2>/dev/null`" \
				&& [ -n "${_VAR1}" ] && _VAR1="`eval $_VAR1 && echo "$NUT_DIR"`" && [ -n "${_VAR1}" ] \
				&& _VAR2="`NUT_DIR="${_VAR1}" ; eval echo "${_VAR}"`" \
				&& [ -n "${_VAR2}" ] && _VAR="${_VAR2}" ;;
		esac
		if [ -n "${_VAR}" ] && [ -s "${_VAR}" ] && [ -x "${_VAR}" ]; then
			echo "INFO: Your ipp.conf contains SHUTDOWNSCRIPT_CUSTOM='${_VAR}' which points to an executable file"
		else
			echo "WARNING: Your ipp.conf contains SHUTDOWNSCRIPT_CUSTOM='${_VAR}' which points to a missing or not executable file"
		fi
	else
		echo "WARNING: Your ipp.conf does not have a SHUTDOWNSCRIPT_CUSTOM set, you might want one"
	fi
	unset _VAR _VAR1 _VAR2
}

choose_network() {
	necho $CS_SEPARATOR_1
	necho $CS_NETWORK_1
	necho $CS_SEPARATOR_1
	echo
	necho $CS_NETWORK_2
	echo
	necho $CS_NETWORK_3
	necho $CS_NETWORK_4
	read_def $CS_NETWORK_5 "1"
	case "$answer" in
	[2])
		C_MODE="netserver"
		;;
	*)
		C_MODE="standalone"
		;;
	esac
}

display_device () {
	DISP_COUNTER=1

	while [ "$DISP_COUNTER" -le "$C_NUM_DEV" ]; do
		eval TMP=\$C_DEVICE"$DISP_COUNTER"
#		DEV_TYPE="`printf "${DISP_COUNTER}- $TMP" | awk   -F' ' '{print \$2}'`"
		DEV_CONF="`echo "$TMP" | awk   -F' ' '{print \$3}'`"
		echo " " "$DISP_COUNTER". "$DEV_TYPE" "$DEV_CONF"
		DISP_COUNTER="`expr $DISP_COUNTER + 1`"
	done
}

remove_ups () {
	if [ "$answer" -lt 1 ]; then
		necho $CS_REMOVE_UPS_2
		return
	fi
	if [ "$answer" -gt "$C_NUM_DEV" ]; then
		necho $CS_REMOVE_UPS_2
		return
	fi

	OLD_NUM_DEV="$C_NUM_DEV"
	C_NUM_DEV="`expr $C_NUM_DEV - 1`"
	if [ "$C_NUM_DEV" -ne 0 ]; then
		eval C_DEVICE$answer=\${C_DEVICE$OLD_NUM_DEV}
		eval C_OPTION$answer=\${C_OPTION$OLD_NUM_DEV}

	fi
}

#return 0 to go back
#return 1 to continue the configuration
#retuen 2 to add another UPS
manage_ups () {
	if [ "$C_NUM_DEV" = 0 ]; then
		return 0
	fi

	necho $CS_SEPARATOR_1
	necho $CS_ANOTHER_UPS_1
	necho $CS_SEPARATOR_1
	echo
	display_device
	echo
	necho $CS_ANOTHER_UPS_2
	necho $CS_ANOTHER_UPS_3
	necho $CS_ANOTHER_UPS_4
	necho $CS_ANOTHER_UPS_5
	read_def $CS_ANOTHER_UPS_6 "1"

	case "$answer" in
	[2])
		return 2
		;;
	[3])
		read_def $CS_REMOVE_UPS_1 ""
		remove_ups
		ret=""
		manage_ups
		ret=$?
		return $ret
		;;
	[0])
		return 0
		;;
	*)
		return 1
		;;
	esac
}

choose_mode() {
	necho $CS_SEPARATOR_1
	necho $CS_WELCOME_1
	necho $CS_SEPARATOR_1
	echo
	necho $CS_MANAGE_1
	echo
	necho $CS_MANAGE_2
	necho $CS_MANAGE_3
	read_def $CS_MANAGE_4 "1"
	case "$answer" in
	[2])
		necho $CS_SEPARATOR_1
		necho $CS_CLIENT_SD_DURATION_1
		necho $CS_SEPARATOR_1
		echo
		necho $CS_CLIENT_SD_DURATION_2
		read TMP

		choose_esd_timer

		C_MODE="netclient"
		ret=2
		while [ $ret = 2 ]; do
			choose_server
			manage_ups
			ret=$?
		done
		;;
	*)
		choose_shutdown_duration
		choose_esd_timer
		choose_network
		ret=2
		while [ $ret = 2 ]; do
			choose_connectivity
			manage_ups
			ret=$?
		done

		if [ $ret = 1 ]; then
			ret=""
			choose_password
			ret=$?
		fi

		if [ $C_NUM_DEV -gt 0 ]; then
			ret=""
			choose_static_powercycle
			ret=$?
		fi
		;;
	esac

	if [ $ret = 1 ]; then
		if [ $C_NUM_DEV -gt 1 ]; then
			ret=""
			choose_minsupplies
			ret=$?
		fi
	fi

	return $ret
}

choose_static_powercycle() {
	necho $CS_SEPARATOR_1
	necho $CS_STATIC_POWERCYCLE_1
	necho $CS_SEPARATOR_1

	answer="x"
	while [ "$answer" != "" ] && [ "$answer" != "forbid" ] && [ "$answer" != "enforce" ]; do
		read_def $CS_STATIC_POWERCYCLE_2 "$C_POWERDOWNFLAG_USER"
		#Check if this is a valid answer
		case "$answer" in
			[Ff]|[Ff][Oo][Rr][Bb][Ii][Dd]|[Nn]|[Nn][Oo])
				answer="forbid" ;;
			[Ee]|[Ee][Nn][Ff][Oo][Rr][Cc][Ee]|[Yy]|[Yy][Ee][Ss])
				answer="enforce" ;;
			""|[Aa][Uu][Tt][Oo])
				answer="" ;;
			*)
				necho $CS_ERR_BADSTRING
				answer="x" ;;
		esac
	done

	C_POWERDOWNFLAG_USER="$answer"
	return 1
}

choose_esd_timer() {
	necho $CS_SEPARATOR_1
	necho $CS_ESDTIMER_1
	necho $CS_SEPARATOR_1

	answer=""
	while [ "$answer" = "" ]; do
		read_def $CS_ESDTIMER_2 "$C_SHUTDOWN_TIMER"
		#Check if this is a valid number
		if [ "$answer" = "" ]; then answer="-1"; fi
		if echo "$answer" | egrep '^\-*[0-9]+$' > /dev/null 2>&1 ; then
			#this is a number
			if [ $answer -lt 0 ]; then
				answer="-1"
			fi
		else
			necho $CS_ERR_NO_NUM
			answer=""
		fi
	done

	C_SHUTDOWN_TIMER="$answer"

	return 1
}

choose_minsupplies() {
	necho $CS_SEPARATOR_1
	necho $CS_MINSUP_1
	necho $CS_SEPARATOR_1

	answer=""
	while [ "$answer" = "" ]; do
		read_def $CS_MINSUP_2 $C_NUM_DEV
		#Check if this is a valid number
		if echo "$answer" | egrep '^[0-9]+$' > /dev/null 2>&1 ; then
			#this is a number
			if [ $answer -lt 1 ]; then
				answer=""
			fi
		else
			necho $CS_ERR_NO_NUM
			answer=""
		fi
	done;

	C_MINSUPPLIES="$answer"
	if [ "$answer" -gt "$C_NUM_DEV" ]; then
		C_MINSUPPLIES="$C_NUM_DEV"
	fi

	return 1
}

choose_connectivity() {
	ret="0"
	while [ $ret = "0" ]; do
		necho $CS_SEPARATOR_1
		necho $CS_CONNECTIVITY_1
		necho $CS_SEPARATOR_1
		echo
		necho $CS_CONNECTIVITY_2
		necho $CS_CONNECTIVITY_3
		necho $CS_CONNECTIVITY_4
		read_def $CS_CONNECTIVITY_5 "1"
		case "$answer" in
		[0])
			return 0
			;;
		[2])
#TODO
			choose_xml_manual_or_auto
			ret=$?
			;;
		*)
			choose_ask_scan_serial
			ret=$?
			;;
		esac
	done
	return $ret
}

choose_ask_scan_serial() {
	ret="0"
	while [ $ret = "0" ]; do
		necho $CS_SEPARATOR_1
		necho $CS_ASK_SERIAL_1
		necho $CS_SEPARATOR_1
		echo
		necho $CS_ASK_SERIAL_2
		echo
		necho $CS_ASK_SERIAL_3
		necho $CS_ASK_SERIAL_4
		necho $CS_ASK_SERIAL_5
		read_def $CS_ASK_SERIAL_6 "1"
		case "$answer" in
		[0])
			return 0
			;;
		[2])
			choose_manual_serial
			ret=$?
			;;
		*)
			choose_serial
			ret=$?
			;;
		esac
	done
	return $ret
}

choose_serial() {
	serial_list="`$NUTCONF --scan-serial auto 2>> "$LOG_FILE"`"
	if [ x"$serial_list" = x"" ]; then
		echo
		read_def $CS_ERR_NO_SERIAL ""
		echo
		return 0
	fi

	necho $CS_SEPARATOR_1
	necho $CS_SERIAL_1
	necho $CS_SEPARATOR_1
	echo

	OLD1_IFS="$IFS"
	IFS="
"

	i="1"
	for s in $serial_list; do
		DEV_NAME="`echo "$s" | awk   -F' ' '{print \$3}'`"
		echo "                      $i. $DEV_NAME"
		i="`expr $i + 1`"
	done

	IFS="$OLD1_IFS"

	necho $CS_SERIAL_3
	read_def $CS_SERIAL_4 "1"
	case "$answer" in
	[0])
		return 0
		;;
	*)
		OLD1_IFS="$IFS"
		IFS="
"

		C_NUM_DEV="`expr $C_NUM_DEV + 1`"
		i="1"
		for s in $serial_list; do
			if [ "$i" = "$answer" ]; then
				eval C_DEVICE$C_NUM_DEV=\"$s\"
				eval C_OPTION$C_NUM_DEV=\"\"
				break;
			fi
			i="`expr $i + 1`"
		done
		IFS="$OLD1_IFS"
		;;
	esac

	return 1
}

choose_manual_serial () {
	necho $CS_SEPARATOR_1
	necho $CS_MANUAL_SERIAL_1
	necho $CS_SEPARATOR_1
	echo
	necho $CS_MANUAL_SERIAL_2
	read_def $CS_MANUAL_SERIAL_3 ""

	DEV="`$NUTCONF --scan-serial $answer 2>> "$LOG_FILE"`"

	if [ "$DEV" = "" ]; then
		read_def $CS_MANUAL_SERIAL_ERR ""
		return 0;
	fi

	C_NUM_DEV="`expr $C_NUM_DEV + 1`"
	eval C_DEVICE$C_NUM_DEV=$DEV

	return 1
}

choose_xml_manual_or_auto() {
	necho $CS_SEPARATOR_1
	necho $CS_XML_MANU_AUTO_1
	necho $CS_SEPARATOR_1
	echo
	necho $CS_XML_MANU_AUTO_2
	echo
	necho $CS_XML_MANU_AUTO_3
	necho $CS_XML_MANU_AUTO_4
	necho $CS_XML_MANU_AUTO_5

	read_def $CS_XML_MANU_AUTO_6 "1"
	case "$answer" in
	[2])
		choose_xml_manual
		return $?
		;;
	[0])
		return 0
		;;
	*)
		choose_xml
		return $?
	esac
}

choose_xml_manual() {
	necho $CS_SEPARATOR_1
	necho $CS_XML_MANU_1
	necho $CS_SEPARATOR_1
	echo
	read_def $CS_XML_MANU_2 ""

	if [ x"$answer" = x"" ]; then
		return 0
	fi

	C_NUM_DEV="`expr $C_NUM_DEV + 1`"
	eval C_DEVICE$C_NUM_DEV=\"XML netxml-ups http://$answer\"

	nmc_login
	return 1
}

choose_xml() {
	necho $CS_SEPARATOR_1
	necho $CS_SNMP_1
	necho $CS_SEPARATOR_1
	echo
	necho $CS_SNMP_2
	echo
	necho $CS_SNMP_6
	echo

	LIST_XML="`$NUTCONF --scan-xml-http 2>> "$LOG_FILE"`"
	if [ "$LIST_XML" = "" ]; then
		read_def $CS_SNMP_7 ""
		choose_snmp
		return $?
	fi

	LIST_XML="`echo "$LIST_XML" | sort`"

	echo

	OLD1_IFS="$IFS"
	IFS="
"

	i="1"
	for s in $LIST_XML; do
		#FIXME: If there is a comma in the description, the description
		#will be shown up to this comma only.
		IP_ADDR="`echo "$s" | awk   -F' ' '{print \$3}' | sed 's/http:\/\///g'`"
		#DESC="`echo "$s" | awk   -F\" '{print $6}' | sed -e "s/^.*\"\(.*\)\".*$/\1/"`"
		echo "                      $i. $IP_ADDR"
		i="`expr $i + 1`"
	done
	IFS="$OLD1_IFS"

	# Ask to scan for more UPS
	printf "                      $i. "
	necho $CS_SNMP_10
	necho $CS_SNMP_9

	read_def $CS_SNMP_8 "1"
	case "$answer" in
	"$i")
		choose_snmp
		return $?
		;;
	[0])
		return 0
		;;
	*)
		OLD1_IFS="$IFS"
		IFS="
"

		C_NUM_DEV="`expr $C_NUM_DEV + 1`"
		i="1"
		for s in $LIST_XML; do
			if [ "$i" = "$answer" ]; then
				eval C_DEVICE$C_NUM_DEV=\"$s\"
				nmc_login
				IFS=$OLD1_IFS
				return 1;
			fi
			i="`expr $i + 1`"
		done
		IFS="$OLD1_IFS"
		C_NUM_DEV="`expr $C_NUM_DEV - 1`"
		;;
	esac

	return 0
}

choose_snmp() {
	necho $CS_SEPARATOR_1
	necho $CS_SNMP_1
	necho $CS_SEPARATOR_1
	echo
	necho $CS_SNMP_2
	echo
	read_def $CS_SNMP_3 $FIRST_IP
	FIRST_IP="$answer"
	if [ "$answer" = "" ]; then
		return 0
	fi
	read_def $CS_SNMP_4 $LAST_IP
	LAST_IP="$answer"
	if [ "$answer" = "" ]; then
		LAST_IP="$FIRST_IP"
	fi

	echo
	read_def $CS_SNMP_5 $C_COMMUNITY
	C_COMMUNITY="$answer"

	echo
	necho $CS_SNMP_6
	echo

	list="`$NUTCONF --scan-snmp "$FIRST_IP" "$LAST_IP" community="$C_COMMUNITY" 2>> "$LOG_FILE"`"

	list="`echo "$list" | sort`"
	echo

	filter_snmp_list

	if [ "$LIST_SNMP" = "" ]; then
		read_def $CS_SNMP_7 ""
		return 0
	fi

	OLD1_IFS="$IFS"
	IFS="
"

	i="1"
	for s in $LIST_SNMP; do
		#FIXME: If there is a comma in the description, the description
		#will be shown up to this comma only.
		IP_ADDR="`echo "$s" | awk   -F' ' '{print \$3}'`"
		#DESC="`echo "$s" | awk   -F\" '{print $6}' | sed -e "s/^.*\"\(.*\)\".*$/\1/"`"
		echo "                      $i. $IP_ADDR"
		i="`expr $i + 1`"
	done
	IFS="$OLD1_IFS"

	necho $CS_SNMP_9

	read_def $CS_SNMP_8 "1"
	case "$answer" in
	[0])
		return 0
		;;
	*)
		OLD1_IFS="$IFS"
		IFS="
"

		C_NUM_DEV="`expr $C_NUM_DEV + 1`"
		i="1"
		for s in $LIST_SNMP; do
			if [ "$i" = "$answer" ]; then
				eval C_DEVICE$C_NUM_DEV=\"$s\"
				eval C_OPTION$C_NUM_DEV=\"community=$C_COMMUNITY\"
				IFS="$OLD1_IFS"
				return 1
			fi
			i="`expr $i + 1`"
		done
		IFS="$OLD1_IFS"
		C_NUM_DEV="`expr $C_NUM_DEV - 1`"
		;;
	esac

	return 0
}

#Remove XML devices from the SNMP list
filter_snmp_list() {
	LIST_SNMP=""
	OLD1_IFS="$IFS"
	IFS="
"
	for s in $list; do
		IP_SNMP="`echo "$s" | awk   -F' ' '{print \$3}'`"
		TO_ADD="$s"
		for x in $LIST_XML; do
			IP_XML="`echo "$x" | awk   -F' ' '{print \$3}' | sed 's/http:\/\///g'`"
			if [ "$IP_SNMP" = "$IP_XML" ]; then
				TO_ADD=""
				break
			fi
		done
		if [ ! "$TO_ADD" = "" ]; then
			LIST_SNMP="`echo "$LIST_SNMP";echo "$TO_ADD"`"
		fi
	done
	IFS="$OLD1_IFS"
}


#only used in netclient mode
choose_server() {
	necho $CS_SEPARATOR_1
	necho $CS_SERVER_1
	necho $CS_SEPARATOR_1
	echo
	necho $CS_SERVER_2
	echo
	read_def $CS_SERVER_3 ""
	FIRST_IP="$answer"
	if [ x"$answer" = x"" ]; then
		return 0
	fi
	read_def $CS_SERVER_4 ""
	LAST_IP="$answer"
	if [ x"$answer" = x"" ]; then
		LAST_IP=$FIRST_IP
	fi

	echo
	necho $CS_SERVER_5
	echo

	list="`$NUTCONF --scan-nut "$FIRST_IP" "$LAST_IP" "$NUT_PORT" 2>> "$LOG_FILE"`"
#TODO parse scan results
	if [ "$list" = "" ]; then
		read_def $CS_SERVER_6 ""
		return 0
	fi

	echo

	OLD1_IFS="$IFS"
	IFS="
"

	i="1"
	for s in $list; do
		UPS="`echo "$s" | awk   -F' ' '{print \$3}'`"
		echo "                      $i. $UPS"
		i="`expr $i + 1`"
	done
	IFS="$OLD1_IFS"

	necho $CS_SERVER_8

	read_def $CS_SERVER_7 "1"
	case "$answer" in
	[0])
		return 0
		;;
	*)
		echo "$C_NUM_DEV"
		C_NUM_DEV="`expr $C_NUM_DEV + 1`"
		echo "$C_NUM_DEV"
		i="1"
		OLD1_IFS="$IFS"
		IFS="
"
		for s in $list; do
			if [ "$i" = "$answer" ]; then
				eval C_DEVICE$C_NUM_DEV=\"$s\"
				eval C_OPTION$C_NUM_DEV=\"\"
				break
			fi
			i="`expr $i + 1`"
		done
		IFS="$OLD1_IFS"
		;;
	esac

	return 1
}

choose_password() {
	necho $CS_SEPARATOR_1
	necho $CS_PASSWORD_1
	necho $CS_SEPARATOR_1

	answer=""
	PASS1="1"
	while [ ! "$answer" = "$PASS1" ] || [ -z "$answer" ]; do
		read_def_silent $CS_PASSWORD_3 ""
		PASS1="$answer"
		read_def_silent $CS_PASSWORD_4 ""
		if [ ! "$answer" = "$PASS1" ]; then
			echo
			necho $CS_ERR_PASSWORDS_DIFFER
			echo
		fi
	done
	C_PASSWORD="$answer"

	return 1
}

get_networked_device() {
	NDEV=0
	C_NUM_NETWORK_DEVICE=0

	while [ "$NDEV" -lt "$C_NUM_DEV" ]; do
		NDEV="`expr $NDEV + 1`"
		eval TMP=\$C_DEVICE"$NDEV"
		DRIVER="`echo "$TMP" | awk -F' ' '{print \$2}'`"
		if [ "$DRIVER" = "netxml-ups" ]; then
			C_NUM_NETWORK_DEVICE="`expr $C_NUM_NETWORK_DEVICE + 1`"
		fi
	done
}

nmc_login() {
	necho $CS_SEPARATOR_1
	necho $CS_NMC_LOGIN_1
	necho $CS_SEPARATOR_1
	echo
	read_def $CS_NMC_LOGIN_2 "admin"
	NMC_LOGIN="$answer"
	answer=""
	PASS1="1"
	while [ ! "$answer" = "$PASS1" ]; do
		read_def_silent $CS_NMC_LOGIN_3 ""
		PASS1="$answer"
		read_def_silent $CS_NMC_LOGIN_4 ""
		if [ ! "$answer" = "$PASS1" ]; then
			echo
			necho $CS_ERR_PASSWORDS_DIFFER
			echo
		fi
	done
	ESD_NETXML_OPTION=""
	if [ "$C_SHUTDOWN_TIMER" -gt 0 ] 2>/dev/null; then
		# Note the leading space is included if value is set
		# Also note this is a cosmetic setting for NMC web-gui
		# to display the value, discrepancies that creep in
		# during later system administration are not sync'ed.
		ESD_NETXML_OPTION=" shutdown_timer=`expr $C_SHUTDOWN_TIMER \* 60`" || \
		ESD_NETXML_OPTION=""
	fi
	if [ "$C_SHUTDOWN_TIMER" -eq 0 ] 2>/dev/null; then
		# Some value >0 must be set to be picked up; for this
		# choice of "1 sec" the NMC Web-GUI shows "0 min" anyway
		ESD_NETXML_OPTION=" shutdown_timer=1"
	fi
	eval C_OPTION$C_NUM_DEV=\"login=$NMC_LOGIN password=$answer subscribe=yes$ESD_NETXML_OPTION shutdown_duration=$C_SHUTDOWN_DURATION\"
}

choose_shutdown_duration() {
	necho $CS_SEPARATOR_1
	necho $CS_SHUTOFF_DELAY_1
	necho $CS_SEPARATOR_1
	echo
	answer=""
	while [ "$answer" = "" ]; do
		read_def $CS_SHUTOFF_DELAY_3 "$C_SHUTDOWN_DURATION"
		#Check if this is a valid number
		if echo "$answer" | egrep '^[0-9]+$' > /dev/null 2>&1; then
			#this is a number, do nothing
			sleep 0
		else
			necho $CS_ERR_NO_NUM
			answer=""
		fi
	done;
	C_SHUTDOWN_DURATION="$answer"

	return 1
}

set_shutdown_command_legacy() {
	SHUTDOWN_CMD="$instpath/shutdown;/usr/sbin/shutdown"

	case "$system" in
	solari)
		$NUTCONF --set-shutdowncmd "$SHUTDOWN_CMD -y -g 0 -i 5" 2>> "$LOG_FILE"
		;;
	solint)
		$NUTCONF --set-shutdowncmd "$SHUTDOWN_CMD -y -g 0 -i 5" 2>> "$LOG_FILE"
		;;
	hpux)
		$NUTCONF --set-shutdowncmd "cd /;$SHUTDOWN_CMD -y -h now" 2>> "$LOG_FILE"
		;;
	aix)
		$NUTCONF --set-shutdowncmd "$SHUTDOWN_CMD -h +0" 2>> "$LOG_FILE"
		;;
	*)
		;;
	esac
}

set_shutdown_command() {
	if [ -x "$instpath/sbin/ipp-os-shutdown" ]; then
		# The new common logic is available, use it
		$NUTCONF --set-shutdowncmd "$instpath/sbin/ipp-os-shutdown -t now" 2>> "$LOG_FILE"
	else
		# Use old OS-specific snippets
		set_shutdown_command_legacy
	fi

	$NUTCONF --set-powerdownflag "$instpath/etc/killpower" 2>> "$LOG_FILE"
}

set_notify() {
	# Events messages (mc2/scripts/lang/eng.lbl)
	# '/Event/UPS.PowerSummary.PresentStatus.ACPresent/1'
	$NUTCONF --set-notifymsg ONLINE "The system is powered by the utility" 2>> "$LOG_FILE" # "UPS %s on line power"
	# '/Event/UPS.PowerSummary.PresentStatus.ACPresent/0'
	$NUTCONF --set-notifymsg ONBATT "The system is powered by the UPS battery" 2>> "$LOG_FILE" #"UPS %s on battery"
	# '/Event/UPS.PowerSummary.PresentStatus.BelowRemainingCapacityLimit/1'
	$NUTCONF --set-notifymsg LOWBATT "Low battery alarm" 2>> "$LOG_FILE" # "UPS %s battery is low"
	# ?
	$NUTCONF --set-notifymsg FSD "UPS %s: forced shutdown in progress" 2>> "$LOG_FILE"
	# '/Event/System.CommunicationLost/0'
	$NUTCONF --set-notifymsg COMMOK "Communication with device is restored" 2>> "$LOG_FILE" # "Communications with UPS %s established"
	# '/Event/System.CommunicationLost/1'
	$NUTCONF --set-notifymsg COMMBAD "Communication with device has failed" 2>> "$LOG_FILE" # "Communications with UPS %s lost"
	# ?
	$NUTCONF --set-notifymsg SHUTDOWN "Auto logout and shutdown proceeding" 2>> "$LOG_FILE"
	# '/Event/UPS.PowerSummary.PresentStatus.NeedReplacement/1'
	$NUTCONF --set-notifymsg REPLBATT "Battery fault" 2>> "$LOG_FILE" # "UPS %s battery needs to be replaced"
	$NUTCONF --set-notifymsg NOCOMM "UPS %s is unavailable" 2>> "$LOG_FILE"
	$NUTCONF --set-notifymsg NOPARENT "Shutdown failure" 2>> "$LOG_FILE" # "upsmon parent process died - shutdown impossible"

	# Enable mail notification
	$NUTCONF --set-notifycmd "$instpath/bin/ipp-notifier.sh" 2>> "$LOG_FILE"

	$NUTCONF --set-notifyflags ONLINE EXEC 2>> "$LOG_FILE"
	$NUTCONF --set-notifyflags ONBATT EXEC 2>> "$LOG_FILE"
	$NUTCONF --set-notifyflags LOWBATT EXEC 2>> "$LOG_FILE"
	$NUTCONF --set-notifyflags FSD EXEC 2>> "$LOG_FILE"
	$NUTCONF --set-notifyflags COMMOK EXEC 2>> "$LOG_FILE"
	$NUTCONF --set-notifyflags COMMBAD EXEC 2>> "$LOG_FILE"
	$NUTCONF --set-notifyflags SHUTDOWN EXEC 2>> "$LOG_FILE"
	$NUTCONF --set-notifyflags REPLBATT EXEC 2>> "$LOG_FILE"
	$NUTCONF --set-notifyflags NOCOMM EXEC 2>> "$LOG_FILE"
	$NUTCONF --set-notifyflags NOPARENT EXEC 2>> "$LOG_FILE"
}

set_ippconf_value() {
	# Replaces a value in the installed ipp.conf which is an assignment
	# of "$1='$2'" and which is not a comment (optional whitespace may
	# be prepended in the present line, but will be removed in the end)
	egrep -v '^[ \t]*('"$1"')=' "$instpath/etc/ipp.conf" \
		> "$instpath/etc/ipp.conf.tmp" && \
	echo "$1='$2'" >> "$instpath/etc/ipp.conf.tmp" && \
	cat "$instpath/etc/ipp.conf.tmp" > "$instpath/etc/ipp.conf"
	res=$?
	rm -f "$instpath/etc/ipp.conf.tmp"
	return $res
}

set_shutdown_duration() {
	set_ippconf_value DELAY "$C_SHUTDOWN_DURATION"
	set_ippconf_value PASSWORD "$C_PASSWORD"
}

set_minsupplies() {
	$NUTCONF --set-minsupplies "$C_MINSUPPLIES" 2>> "$LOG_FILE"
}

set_debug_flag() {
	# Keep an old value if it was set
	egrep '^[ \t]*IPP_DEBUG=' "$instpath/etc/ipp.conf" >/dev/null || \
		echo "IPP_DEBUG='$IPP_DEBUG'" >> "$instpath/etc/ipp.conf"
}

set_esd_timer() {
	set_ippconf_value SHUTDOWN_TIMER "$C_SHUTDOWN_TIMER"
}

set_host_os_flavour() {
	set_ippconf_value HOST_OS_FLAVOUR "$system"
}

set_static_powercycle() {
	# Generally this variable should be left empty and the powercycling
	# would be enabled or diabled based on killpower flag. However in some
	# cases a user may want to enforce the setting (e.g. last ESD host).
	set_ippconf_value POWERDOWNFLAG_USER "$C_POWERDOWNFLAG_USER"
}

review_conf() {
	display_conf

	read_def $CS_REVIEW_10 "n"
	case "$answer" in
	[yY])
		conf_ok="ok"

		$NUTCONF --set-mode "$C_MODE" 2>> "$LOG_FILE"

		case "$C_MODE" in
		netclient)
			apply_conf_client
			;;
		netserver)
			apply_conf_server
			;;
		standalone)
			apply_conf_standalone
			;;
		esac

		set_minsupplies
		set_shutdown_command
		set_notify
		set_shutdown_duration
		set_esd_timer
		set_static_powercycle
		set_debug_flag

		;;

	*)
		;;
	esac

}

display_conf() {
	necho $CS_SEPARATOR_1
	necho $CS_REVIEW_1
	necho $CS_SEPARATOR_1
	echo
	if [ "$C_MODE" = "standalone" ]; then
		necho $CS_REVIEW_2
	fi
	if [ "$C_MODE" = "netserver" ]; then
		necho $CS_REVIEW_3
	fi
	if [ "$C_MODE" = "netclient" ]; then
		necho $CS_REVIEW_4
	fi
	echo
	necho $CS_REVIEW_5
	display_device
	echo
	if [ "$C_NUM_DEV" -gt 1 ]; then
		necho $CS_REVIEW_6 " " $C_MINSUPPLIES
	fi

	necho $CS_REVIEW_7 " " $C_SHUTDOWN_TIMER
	echo

	necho $CS_REVIEW_8 " " $C_SHUTDOWN_DURATION
	echo

	necho $CS_REVIEW_9 " " $C_POWERDOWNFLAG_USER
	echo

}

apply_conf_client() {
	NDEV=1
	$NUTCONF --set-user upsmon=slave password=upsmon 2>> "$LOG_FILE"

	eval TMP=\$C_DEVICE$NDEV
	DEV="`echo "$TMP" | awk -F' ' '{print \$3}'`"
	UPS="`echo "$DEV" | awk -F'@' '{print \$1}'`"
	HOST="`echo "$DEV"| awk -F'@' '{print \$2}'`"
	# TODO: Here we assume that one UPS powers one input of the server
	# Logically this can mismatch our setting of MINSUPPLIES if the user
	# (later) specifies real powersource counts, and topology is not 1:1
	$NUTCONF --set-monitor "${UPS}" "$HOST" 1 upsmon upsmon slave 2>> "$LOG_FILE"

	while [ "$NDEV" -lt "$C_NUM_DEV" ]; do
		NDEV="`expr $NDEV + 1`"
		eval TMP=\$C_DEVICE$NDEV
		DEV="`echo "$TMP" | awk -F' ' '{print \$3}'`"
		UPS="`echo "$DEV" | awk -F'@' '{print \$1}'`"
		HOST="`echo "$DEV"| awk -F'@' '{print \$2}'`"
		$NUTCONF --add-monitor "${UPS}" "$HOST" 1 upsmon upsmon slave 2>> "$LOG_FILE"
	done
}

split_device () {
	eval TMP=\$C_DEVICE$NDEV
	ID="`echo "$TMP" | awk -F' ' '{print \$1}'`"
	DRIVER="`echo "$TMP" | awk -F' ' '{print \$2}'`"
	PORT="`echo "$TMP" | awk -F' ' '{print \$3}'`"
}

setup_tty () {
	local TTY="$1" > "$LOG_FILE" 2>&1

	chmod 666 "$TTY" > "$LOG_FILE" 2>&1
	chown ipp:ipp "$TTY" > "$LOG_FILE" 2>&1
}

set_device_monitor_user () {
	NDEV=1

	split_device

	eval TMP=\$C_OPTION$NDEV
	$NUTCONF --set-device "${ID}$NDEV" "$DRIVER" "$PORT" $TMP 2>> "$LOG_FILE"
	$NUTCONF --set-monitor "${ID}$NDEV" localhost 1 upsmon upsmon master 2>> "$LOG_FILE"

	echo "$PORT" | grep '^/dev/tty' >/dev/null && setup_tty "$PORT"

	while [ "$NDEV" -lt "$C_NUM_DEV" ]; do
		NDEV="`expr $NDEV + 1`"
		split_device
		eval TMP=\$C_OPTION$NDEV
		$NUTCONF --add-device "${ID}$NDEV" "$DRIVER" "$PORT" $TMP 2>> "$LOG_FILE"
		$NUTCONF --add-monitor "${ID}$NDEV" localhost 1 upsmon upsmon master 2>> "$LOG_FILE"

		echo "$PORT" | grep '^/dev/tty' >/dev/null && setup_tty "$PORT"
	done

	$NUTCONF --set-user admin password="$C_PASSWORD" actions=SET instcmds=all 2>> "$LOG_FILE"
	$NUTCONF --add-user upsmon=master password=upsmon 2>> "$LOG_FILE"
}

apply_conf_server() {
	$NUTCONF --set-listen 0.0.0.0 2>> "$LOG_FILE"

	set_device_monitor_user
}

apply_conf_standalone () {
	$NUTCONF --set-listen 127.0.0.1 2>> "$LOG_FILE"

	set_device_monitor_user
}

start_service () {
	necho $CS_START_SERVICE
	stop_service
	case "$system" in
		solari)
		/etc/init.d/nut start >> "$LOG_FILE" 2>&1
		;;
		solint)
		/etc/init.d/nut start >> "$LOG_FILE" 2>&1
		;;
		hpux)
		/sbin/init.d/nut-drvctl start >> "$LOG_FILE" 2>&1
		/sbin/init.d/nut-upsd start >> "$LOG_FILE" 2>&1
		/sbin/init.d/nut-upsmon start >> "$LOG_FILE" 2>&1
		;;
		aix)
		/etc/rc.d/init.d/ups start >> "$LOG_FILE" 2>&1
		;;
		*)
		;;
	esac
}

stop_service () {
	case $system in
		solari)
		/etc/init.d/nut stop >> "$LOG_FILE" 2>&1
		;;
		solint)
		/etc/init.d/nut stop >> "$LOG_FILE" 2>&1
		;;
		hpux)
		/sbin/init.d/nut-drvctl stop >> "$LOG_FILE" 2>&1
		/sbin/init.d/nut-upsd stop >> "$LOG_FILE" 2>&1
		/sbin/init.d/nut-upsmon stop >> "$LOG_FILE" 2>&1
		;;
		aix)
		/etc/rc.d/init.d/ups stop >> "$LOG_FILE" 2>&1
		;;
		*)
		;;
	esac
}

add_hpux_upsmon_esd_support () {
	if [ -f /etc/rc.config.d/nut-upsmon ]; then
		cat >>/etc/rc.config.d/nut-upsmon <<HERE
##### IPP - Unix ESD support begin #####
# Do not remove nor change the line above, it's used
# for automatic removal of the section upon uninstallation
SHUTDOWN_TIMER=-1
if [ -f "/usr/local/ups/etc/ipp.conf" ]; then
	. /usr/local/ups/etc/ipp.conf
fi
if [ "\$SHUTDOWN_TIMER" -gt -1 ]; then
	# This host wants early shutdown support, must be root
	UPSMON_ARGS="\$UPSMON_ARGS -p"
fi
# Again, do not remove nor change the line below
##### IPP - Unix ESD support end #####
HERE
	fi
}

remove_hpux_upsmon_esd_support () {
	if /usr/bin/test -e /etc/rc.config.d/nut-upsmon; then
		awk '
		BEGIN {
			echo = 1;
		}

		/^##### IPP - Unix ESD support begin #####$/ {
			echo = 0;
		}

		/^##### IPP - Unix ESD support end #####$/ {
			echo = 1;
			next;
		}

		{
			if (echo) print $0;
		}
		' /etc/rc.config.d/nut-upsmon > /tmp/nut-upsmon.tmp.$$

		mv /tmp/nut-upsmon.tmp.$$ /etc/rc.config.d/nut-upsmon
	fi
}

add_profile_settings () {
	if [ -f /etc/profile ]; then
		cat >>/etc/profile <<HERE
##### IPP - Unix settings begin #####
# Do not remove nor change the line above, it's used
# for automatic removal of the section upon uninstallation
# NOTE: The xbin directory contains symlinks to a wrapper
# which sets the environment for packaged programs in bin;
# but the bin also has scripts.
PATH="\$PATH:/usr/local/ups/xbin:/usr/local/ups/bin"
export PATH
#LD_LIBRARY_PATH="/usr/local/ups/lib:\$LD_LIBRARY_PATH"
#export LD_LIBRARY_PATH
MANPATH="\$MANPATH:/usr/local/ups/share/man"
export MANPATH
# Again, do not remove nor change the line below
##### IPP - Unix settings end #####
HERE
	fi
}

remove_profile_settings () {
	if /usr/bin/test -e /etc/profile; then
		awk '
		BEGIN {
			echo = 1;
		}

		/^##### IPP - Unix settings begin #####$/ {
			echo = 0;
		}

		/^##### IPP - Unix settings end #####$/ {
			echo = 1;
			next;
		}

		{
			if (echo) print $0;
		}
		' /etc/profile > /tmp/profile.tmp.$$

		mv /tmp/profile.tmp.$$ /etc/profile
	fi
}

main () {
# Setup some globals
instpath=/usr/local/ups
#skip_install=true
#skip_license=true
#skip_service=true
#skip_config=true
ret=TRUE

# Must check parameters
	lang=""
	SYSTEM=""

	if [ "$1" != "" ] ; then
		get_parameters $1
	fi

	if [ "$2" != "" ] ; then
		get_parameters $2
	fi

	if [ "$3" != "" ] ; then
		get_parameters $3
	fi

# Get language locale
	if [ "$lang" = "" ]; then
		check_locale_language
		if [ -z "$lang" ]; then
			lang=EN
		fi
	fi

#  Initialize resource strings.
	installres="$COMMON_DIR"_$lang/install.res
	licenseres="$COMMON_DIR"_$lang/license.txt
	initDefines

	compute_SYSTEM

	systemdir="$system"
	NUTCONF="$systemdir/nutconf"

	who="`whoami 2>/dev/null`"
	if [ "$who" != 'root' ]; then
#work around in case no whoami is present
		who="`id -u 2>/dev/null`"
		if [ "$who" != '0' ]; then
			who="`id 2>/dev/null | grep -w '0' | grep -w root`"
			if [ -z "$who" ]; then
				necho $ERR_ROOT
				exit 1
			fi
		fi
	fi

# Say hello
#	we'll install vanilla IPP unix.
	clear
	echo
	echo
	echo "-----------------------------------------------------------------"
	echo

	echo "                      EATON"
	echo
#	echo "Welcome to IPP Unix!"
	necho $WELCOME_STR1

#	echo "         `pwd`/$0 Version 5.0.0"
	lineStr="`head "-$STR_VERSION" $installres |tail -1`"
	#echo "         `pwd`/$0 $lineStr $lineStr1"
	echo "                       $lineStr $IPP_VERSION"

	echo
#	echo "           To install IPP - Unix, select (y)"
#	echo "and fill in the configuration items as they are presented to you."
	necho $WELCOME_STR2
	necho $WELCOME_STR3
	echo
#	echo "The default install path name for this software is:  $instpath"
	lineStr="`head -$DEFAULT_PATH_STR $installres |tail -1`"
	echo "   $lineStr"
	echo "   $instpath"
	echo
	echo "-----------------------------------------------------------------"
	echo
#	echo "NOTE: If you already have LanSafe for Unix installed and you"
#	echo "      do not wish to re-install it, select (N)o to stop"
#	echo "      LanSafe for Unix installation."

	necho $INSTALL_INTRO_STR1
	necho $INSTALL_INTRO_STR2
	necho $INSTALL_INTRO_STR3
	echo
	echo

#	read_def "  Continue IPP - Unix installation? (y/n) [y] " "y"
	read_def $INSTALL_INTRO_STR4 "y"
	case "$answer" in
	[yY]|[yY][eE][sS])
		;;
	*)
		exit 0
		;;
	esac

	if [ x"$system" = x"Unknown System" ]
	then
		echo
#		echo "  Unable to determine your system."
		lineStr="`head -$ERR_UNKNOWN_SYS_STR1 $installres |tail -1`"
		echo "  $lineStr"
		exit 0
	fi	# end-of "if system = Unknown system"

	echo
	echo

# License Agreement
	if [ -z "$skip_license" ]; then
		echo " "
		more $licenseres
		echo " "
		necho $LICENSE_AGREEMENT_1
		echo
		necho $LICENSE_AGREEMENT_2
		necho $LICENSE_AGREEMENT_3
		necho $LICENSE_AGREEMENT_4
		echo

		read_def $LICENSE_AGREEMENT_5 "n"

		case "$answer" in
		[yY]|[yY][eE][sS])
			;;
		*)
			necho $ERR_LIC_AGREE
			exit 1
			;;
		esac
	fi

	stop_service

	# Install files
	if [ -z "$skip_install" ]; then
		install_files
		set_host_os_flavour
	fi

	echo
	echo

	# Build initial configuration
	if [ -z "$skip_config" ]; then
		PATH="$PATH:/usr/local/ups/xbin:/usr/local/ups/bin"
		export PATH
#		LD_LIBRARY_PATH="$instpath/lib:/usr/local/lib:$LD_LIBRARY_PATH"
#		export LD_LIBRARY_PATH
		initial_configure
	fi

	# Add IPP - Unix specific env. settings
	add_profile_settings

	# Start service
	if [ -z "$skip_service" ]; then
		start_service
	fi

# Say goodbye
	if [ "$conf_ok" = "ok" ]; then
		echo "---------------------------------------------------------------"
#		echo "     IPP - Unix was successfully installed on your system.     "
		lineStr="`head -$SUCCESS_INSTALL $installres |tail -1`"
		echo "     $lineStr"
		echo "---------------------------------------------------------------"
	else
		echo "-----------------------------------------------------------------------------"
#		echo "     WARNING: IPP - Unix was NOT successfully installed on your system.     "
		lineStr="`head -$UNSUCCESS_INSTALL $installres |tail -1`"
		echo "     $lineStr"
		echo "-----------------------------------------------------------------------------"
		echo
#		necho $INSTALL_ERROR
		exit 1
	fi
}

main $1 $2 $3